| /* |
| * Copyright (c) 2000-2002,2005 Silicon Graphics, Inc. |
| * Copyright (c) 2008 Dave Chinner |
| * All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it would be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write the Free Software Foundation, |
| * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| #include "xfs.h" |
| #include "xfs_fs.h" |
| #include "xfs_log_format.h" |
| #include "xfs_trans_resv.h" |
| #include "xfs_sb.h" |
| #include "xfs_ag.h" |
| #include "xfs_mount.h" |
| #include "xfs_trans.h" |
| #include "xfs_trans_priv.h" |
| #include "xfs_trace.h" |
| #include "xfs_error.h" |
| #include "xfs_log.h" |
| |
| #ifdef DEBUG |
| /* |
| * Check that the list is sorted as it should be. |
| */ |
| STATIC void |
| xfs_ail_check( |
| struct xfs_ail *ailp, |
| xfs_log_item_t *lip) |
| { |
| xfs_log_item_t *prev_lip; |
| |
| if (list_empty(&ailp->xa_ail)) |
| return; |
| |
| /* |
| * Check the next and previous entries are valid. |
| */ |
| ASSERT((lip->li_flags & XFS_LI_IN_AIL) != 0); |
| prev_lip = list_entry(lip->li_ail.prev, xfs_log_item_t, li_ail); |
| if (&prev_lip->li_ail != &ailp->xa_ail) |
| ASSERT(XFS_LSN_CMP(prev_lip->li_lsn, lip->li_lsn) <= 0); |
| |
| prev_lip = list_entry(lip->li_ail.next, xfs_log_item_t, li_ail); |
| if (&prev_lip->li_ail != &ailp->xa_ail) |
| ASSERT(XFS_LSN_CMP(prev_lip->li_lsn, lip->li_lsn) >= 0); |
| |
| |
| } |
| #else /* !DEBUG */ |
| #define xfs_ail_check(a,l) |
| #endif /* DEBUG */ |
| |
| /* |
| * Return a pointer to the last item in the AIL. If the AIL is empty, then |
| * return NULL. |
| */ |
| static xfs_log_item_t * |
| xfs_ail_max( |
| struct xfs_ail *ailp) |
| { |
| if (list_empty(&ailp->xa_ail)) |
| return NULL; |
| |
| return list_entry(ailp->xa_ail.prev, xfs_log_item_t, li_ail); |
| } |
| |
| /* |
| * Return a pointer to the item which follows the given item in the AIL. If |
| * the given item is the last item in the list, then return NULL. |
| */ |
| static xfs_log_item_t * |
| xfs_ail_next( |
| struct xfs_ail *ailp, |
| xfs_log_item_t *lip) |
| { |
| if (lip->li_ail.next == &ailp->xa_ail) |
| return NULL; |
| |
| return list_first_entry(&lip->li_ail, xfs_log_item_t, li_ail); |
| } |
| |
| /* |
| * This is called by the log manager code to determine the LSN of the tail of |
| * the log. This is exactly the LSN of the first item in the AIL. If the AIL |
| * is empty, then this function returns 0. |
| * |
| * We need the AIL lock in order to get a coherent read of the lsn of the last |
| * item in the AIL. |
| */ |
| xfs_lsn_t |
| xfs_ail_min_lsn( |
| struct xfs_ail *ailp) |
| { |
| xfs_lsn_t lsn = 0; |
| xfs_log_item_t *lip; |
| |
| spin_lock(&ailp->xa_lock); |
| lip = xfs_ail_min(ailp); |
| if (lip) |
| lsn = lip->li_lsn; |
| spin_unlock(&ailp->xa_lock); |
| |
| return lsn; |
| } |
| |
| /* |
| * Return the maximum lsn held in the AIL, or zero if the AIL is empty. |
| */ |
| static xfs_lsn_t |
| xfs_ail_max_lsn( |
| struct xfs_ail *ailp) |
| { |
| xfs_lsn_t lsn = 0; |
| xfs_log_item_t *lip; |
| |
| spin_lock(&ailp->xa_lock); |
| lip = xfs_ail_max(ailp); |
| if (lip) |
| lsn = lip->li_lsn; |
| spin_unlock(&ailp->xa_lock); |
| |
| return lsn; |
| } |
| |
| /* |
| * The cursor keeps track of where our current traversal is up to by tracking |
| * the next item in the list for us. However, for this to be safe, removing an |
| * object from the AIL needs to invalidate any cursor that points to it. hence |
| * the traversal cursor needs to be linked to the struct xfs_ail so that |
| * deletion can search all the active cursors for invalidation. |
| */ |
| STATIC void |
| xfs_trans_ail_cursor_init( |
| struct xfs_ail *ailp, |
| struct xfs_ail_cursor *cur) |
| { |
| cur->item = NULL; |
| list_add_tail(&cur->list, &ailp->xa_cursors); |
| } |
| |
| /* |
| * Get the next item in the traversal and advance the cursor. If the cursor |
| * was invalidated (indicated by a lip of 1), restart the traversal. |
| */ |
| struct xfs_log_item * |
| xfs_trans_ail_cursor_next( |
| struct xfs_ail *ailp, |
| struct xfs_ail_cursor *cur) |
| { |
| struct xfs_log_item *lip = cur->item; |
| |
| if ((__psint_t)lip & 1) |
| lip = xfs_ail_min(ailp); |
| if (lip) |
| cur->item = xfs_ail_next(ailp, lip); |
| return lip; |
| } |
| |
| /* |
| * When the traversal is complete, we need to remove the cursor from the list |
| * of traversing cursors. |
| */ |
| void |
| xfs_trans_ail_cursor_done( |
| struct xfs_ail_cursor *cur) |
| { |
| cur->item = NULL; |
| list_del_init(&cur->list); |
| } |
| |
| /* |
| * Invalidate any cursor that is pointing to this item. This is called when an |
| * item is removed from the AIL. Any cursor pointing to this object is now |
| * invalid and the traversal needs to be terminated so it doesn't reference a |
| * freed object. We set the low bit of the cursor item pointer so we can |
| * distinguish between an invalidation and the end of the list when getting the |
| * next item from the cursor. |
| */ |
| STATIC void |
| xfs_trans_ail_cursor_clear( |
| struct xfs_ail *ailp, |
| struct xfs_log_item *lip) |
| { |
| struct xfs_ail_cursor *cur; |
| |
| list_for_each_entry(cur, &ailp->xa_cursors, list) { |
| if (cur->item == lip) |
| cur->item = (struct xfs_log_item *) |
| ((__psint_t)cur->item | 1); |
| } |
| } |
| |
| /* |
| * Find the first item in the AIL with the given @lsn by searching in ascending |
| * LSN order and initialise the cursor to point to the next item for a |
| * ascending traversal. Pass a @lsn of zero to initialise the cursor to the |
| * first item in the AIL. Returns NULL if the list is empty. |
| */ |
| xfs_log_item_t * |
| xfs_trans_ail_cursor_first( |
| struct xfs_ail *ailp, |
| struct xfs_ail_cursor *cur, |
| xfs_lsn_t lsn) |
| { |
| xfs_log_item_t *lip; |
| |
| xfs_trans_ail_cursor_init(ailp, cur); |
| |
| if (lsn == 0) { |
| lip = xfs_ail_min(ailp); |
| goto out; |
| } |
| |
| list_for_each_entry(lip, &ailp->xa_ail, li_ail) { |
| if (XFS_LSN_CMP(lip->li_lsn, lsn) >= 0) |
| goto out; |
| } |
| return NULL; |
| |
| out: |
| if (lip) |
| cur->item = xfs_ail_next(ailp, lip); |
| return lip; |
| } |
| |
| static struct xfs_log_item * |
| __xfs_trans_ail_cursor_last( |
| struct xfs_ail *ailp, |
| xfs_lsn_t lsn) |
| { |
| xfs_log_item_t *lip; |
| |
| list_for_each_entry_reverse(lip, &ailp->xa_ail, li_ail) { |
| if (XFS_LSN_CMP(lip->li_lsn, lsn) <= 0) |
| return lip; |
| } |
| return NULL; |
| } |
| |
| /* |
| * Find the last item in the AIL with the given @lsn by searching in descending |
| * LSN order and initialise the cursor to point to that item. If there is no |
| * item with the value of @lsn, then it sets the cursor to the last item with an |
| * LSN lower than @lsn. Returns NULL if the list is empty. |
| */ |
| struct xfs_log_item * |
| xfs_trans_ail_cursor_last( |
| struct xfs_ail *ailp, |
| struct xfs_ail_cursor *cur, |
| xfs_lsn_t lsn) |
| { |
| xfs_trans_ail_cursor_init(ailp, cur); |
| cur->item = __xfs_trans_ail_cursor_last(ailp, lsn); |
| return cur->item; |
| } |
| |
| /* |
| * Splice the log item list into the AIL at the given LSN. We splice to the |
| * tail of the given LSN to maintain insert order for push traversals. The |
| * cursor is optional, allowing repeated updates to the same LSN to avoid |
| * repeated traversals. This should not be called with an empty list. |
| */ |
| static void |
| xfs_ail_splice( |
| struct xfs_ail *ailp, |
| struct xfs_ail_cursor *cur, |
| struct list_head *list, |
| xfs_lsn_t lsn) |
| { |
| struct xfs_log_item *lip; |
| |
| ASSERT(!list_empty(list)); |
| |
| /* |
| * Use the cursor to determine the insertion point if one is |
| * provided. If not, or if the one we got is not valid, |
| * find the place in the AIL where the items belong. |
| */ |
| lip = cur ? cur->item : NULL; |
| if (!lip || (__psint_t) lip & 1) |
| lip = __xfs_trans_ail_cursor_last(ailp, lsn); |
| |
| /* |
| * If a cursor is provided, we know we're processing the AIL |
| * in lsn order, and future items to be spliced in will |
| * follow the last one being inserted now. Update the |
| * cursor to point to that last item, now while we have a |
| * reliable pointer to it. |
| */ |
| if (cur) |
| cur->item = list_entry(list->prev, struct xfs_log_item, li_ail); |
| |
| /* |
| * Finally perform the splice. Unless the AIL was empty, |
| * lip points to the item in the AIL _after_ which the new |
| * items should go. If lip is null the AIL was empty, so |
| * the new items go at the head of the AIL. |
| */ |
| if (lip) |
| list_splice(list, &lip->li_ail); |
| else |
| list_splice(list, &ailp->xa_ail); |
| } |
| |
| /* |
| * Delete the given item from the AIL. Return a pointer to the item. |
| */ |
| static void |
| xfs_ail_delete( |
| struct xfs_ail *ailp, |
| xfs_log_item_t *lip) |
| { |
| xfs_ail_check(ailp, lip); |
| list_del(&lip->li_ail); |
| xfs_trans_ail_cursor_clear(ailp, lip); |
| } |
| |
| static long |
| xfsaild_push( |
| struct xfs_ail *ailp) |
| { |
| xfs_mount_t *mp = ailp->xa_mount; |
| struct xfs_ail_cursor cur; |
| xfs_log_item_t *lip; |
| xfs_lsn_t lsn; |
| xfs_lsn_t target; |
| long tout; |
| int stuck = 0; |
| int flushing = 0; |
| int count = 0; |
| |
| /* |
| * If we encountered pinned items or did not finish writing out all |
| * buffers the last time we ran, force the log first and wait for it |
| * before pushing again. |
| */ |
| if (ailp->xa_log_flush && ailp->xa_last_pushed_lsn == 0 && |
| (!list_empty_careful(&ailp->xa_buf_list) || |
| xfs_ail_min_lsn(ailp))) { |
| ailp->xa_log_flush = 0; |
| |
| XFS_STATS_INC(xs_push_ail_flush); |
| xfs_log_force(mp, XFS_LOG_SYNC); |
| } |
| |
| spin_lock(&ailp->xa_lock); |
| |
| /* barrier matches the xa_target update in xfs_ail_push() */ |
| smp_rmb(); |
| target = ailp->xa_target; |
| ailp->xa_target_prev = target; |
| |
| lip = xfs_trans_ail_cursor_first(ailp, &cur, ailp->xa_last_pushed_lsn); |
| if (!lip) { |
| /* |
| * If the AIL is empty or our push has reached the end we are |
| * done now. |
| */ |
| xfs_trans_ail_cursor_done(&cur); |
| spin_unlock(&ailp->xa_lock); |
| goto out_done; |
| } |
| |
| XFS_STATS_INC(xs_push_ail); |
| |
| lsn = lip->li_lsn; |
| while ((XFS_LSN_CMP(lip->li_lsn, target) <= 0)) { |
| int lock_result; |
| |
| /* |
| * Note that iop_push may unlock and reacquire the AIL lock. We |
| * rely on the AIL cursor implementation to be able to deal with |
| * the dropped lock. |
| */ |
| lock_result = lip->li_ops->iop_push(lip, &ailp->xa_buf_list); |
| switch (lock_result) { |
| case XFS_ITEM_SUCCESS: |
| XFS_STATS_INC(xs_push_ail_success); |
| trace_xfs_ail_push(lip); |
| |
| ailp->xa_last_pushed_lsn = lsn; |
| break; |
| |
| case XFS_ITEM_FLUSHING: |
| /* |
| * The item or its backing buffer is already beeing |
| * flushed. The typical reason for that is that an |
| * inode buffer is locked because we already pushed the |
| * updates to it as part of inode clustering. |
| * |
| * We do not want to to stop flushing just because lots |
| * of items are already beeing flushed, but we need to |
| * re-try the flushing relatively soon if most of the |
| * AIL is beeing flushed. |
| */ |
| XFS_STATS_INC(xs_push_ail_flushing); |
| trace_xfs_ail_flushing(lip); |
| |
| flushing++; |
| ailp->xa_last_pushed_lsn = lsn; |
| break; |
| |
| case XFS_ITEM_PINNED: |
| XFS_STATS_INC(xs_push_ail_pinned); |
| trace_xfs_ail_pinned(lip); |
| |
| stuck++; |
| ailp->xa_log_flush++; |
| break; |
| case XFS_ITEM_LOCKED: |
| XFS_STATS_INC(xs_push_ail_locked); |
| trace_xfs_ail_locked(lip); |
| |
| stuck++; |
| break; |
| default: |
| ASSERT(0); |
| break; |
| } |
| |
| count++; |
| |
| /* |
| * Are there too many items we can't do anything with? |
| * |
| * If we we are skipping too many items because we can't flush |
| * them or they are already being flushed, we back off and |
| * given them time to complete whatever operation is being |
| * done. i.e. remove pressure from the AIL while we can't make |
| * progress so traversals don't slow down further inserts and |
| * removals to/from the AIL. |
| * |
| * The value of 100 is an arbitrary magic number based on |
| * observation. |
| */ |
| if (stuck > 100) |
| break; |
| |
| lip = xfs_trans_ail_cursor_next(ailp, &cur); |
| if (lip == NULL) |
| break; |
| lsn = lip->li_lsn; |
| } |
| xfs_trans_ail_cursor_done(&cur); |
| spin_unlock(&ailp->xa_lock); |
| |
| if (xfs_buf_delwri_submit_nowait(&ailp->xa_buf_list)) |
| ailp->xa_log_flush++; |
| |
| if (!count || XFS_LSN_CMP(lsn, target) >= 0) { |
| out_done: |
| /* |
| * We reached the target or the AIL is empty, so wait a bit |
| * longer for I/O to complete and remove pushed items from the |
| * AIL before we start the next scan from the start of the AIL. |
| */ |
| tout = 50; |
| ailp->xa_last_pushed_lsn = 0; |
| } else if (((stuck + flushing) * 100) / count > 90) { |
| /* |
| * Either there is a lot of contention on the AIL or we are |
| * stuck due to operations in progress. "Stuck" in this case |
| * is defined as >90% of the items we tried to push were stuck. |
| * |
| * Backoff a bit more to allow some I/O to complete before |
| * restarting from the start of the AIL. This prevents us from |
| * spinning on the same items, and if they are pinned will all |
| * the restart to issue a log force to unpin the stuck items. |
| */ |
| tout = 20; |
| ailp->xa_last_pushed_lsn = 0; |
| } else { |
| /* |
| * Assume we have more work to do in a short while. |
| */ |
| tout = 10; |
| } |
| |
| return tout; |
| } |
| |
| static int |
| xfsaild( |
| void *data) |
| { |
| struct xfs_ail *ailp = data; |
| long tout = 0; /* milliseconds */ |
| |
| current->flags |= PF_MEMALLOC; |
| |
| while (!kthread_should_stop()) { |
| if (tout && tout <= 20) |
| __set_current_state(TASK_KILLABLE); |
| else |
| __set_current_state(TASK_INTERRUPTIBLE); |
| |
| spin_lock(&ailp->xa_lock); |
| |
| /* |
| * Idle if the AIL is empty and we are not racing with a target |
| * update. We check the AIL after we set the task to a sleep |
| * state to guarantee that we either catch an xa_target update |
| * or that a wake_up resets the state to TASK_RUNNING. |
| * Otherwise, we run the risk of sleeping indefinitely. |
| * |
| * The barrier matches the xa_target update in xfs_ail_push(). |
| */ |
| smp_rmb(); |
| if (!xfs_ail_min(ailp) && |
| ailp->xa_target == ailp->xa_target_prev) { |
| spin_unlock(&ailp->xa_lock); |
| schedule(); |
| tout = 0; |
| continue; |
| } |
| spin_unlock(&ailp->xa_lock); |
| |
| if (tout) |
| schedule_timeout(msecs_to_jiffies(tout)); |
| |
| __set_current_state(TASK_RUNNING); |
| |
| try_to_freeze(); |
| |
| tout = xfsaild_push(ailp); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * This routine is called to move the tail of the AIL forward. It does this by |
| * trying to flush items in the AIL whose lsns are below the given |
| * threshold_lsn. |
| * |
| * The push is run asynchronously in a workqueue, which means the caller needs |
| * to handle waiting on the async flush for space to become available. |
| * We don't want to interrupt any push that is in progress, hence we only queue |
| * work if we set the pushing bit approriately. |
| * |
| * We do this unlocked - we only need to know whether there is anything in the |
| * AIL at the time we are called. We don't need to access the contents of |
| * any of the objects, so the lock is not needed. |
| */ |
| void |
| xfs_ail_push( |
| struct xfs_ail *ailp, |
| xfs_lsn_t threshold_lsn) |
| { |
| xfs_log_item_t *lip; |
| |
| lip = xfs_ail_min(ailp); |
| if (!lip || XFS_FORCED_SHUTDOWN(ailp->xa_mount) || |
| XFS_LSN_CMP(threshold_lsn, ailp->xa_target) <= 0) |
| return; |
| |
| /* |
| * Ensure that the new target is noticed in push code before it clears |
| * the XFS_AIL_PUSHING_BIT. |
| */ |
| smp_wmb(); |
| xfs_trans_ail_copy_lsn(ailp, &ailp->xa_target, &threshold_lsn); |
| smp_wmb(); |
| |
| wake_up_process(ailp->xa_task); |
| } |
| |
| /* |
| * Push out all items in the AIL immediately |
| */ |
| void |
| xfs_ail_push_all( |
| struct xfs_ail *ailp) |
| { |
| xfs_lsn_t threshold_lsn = xfs_ail_max_lsn(ailp); |
| |
| if (threshold_lsn) |
| xfs_ail_push(ailp, threshold_lsn); |
| } |
| |
| /* |
| * Push out all items in the AIL immediately and wait until the AIL is empty. |
| */ |
| void |
| xfs_ail_push_all_sync( |
| struct xfs_ail *ailp) |
| { |
| struct xfs_log_item *lip; |
| DEFINE_WAIT(wait); |
| |
| spin_lock(&ailp->xa_lock); |
| while ((lip = xfs_ail_max(ailp)) != NULL) { |
| prepare_to_wait(&ailp->xa_empty, &wait, TASK_UNINTERRUPTIBLE); |
| ailp->xa_target = lip->li_lsn; |
| wake_up_process(ailp->xa_task); |
| spin_unlock(&ailp->xa_lock); |
| schedule(); |
| spin_lock(&ailp->xa_lock); |
| } |
| spin_unlock(&ailp->xa_lock); |
| |
| finish_wait(&ailp->xa_empty, &wait); |
| } |
| |
| /* |
| * xfs_trans_ail_update - bulk AIL insertion operation. |
| * |
| * @xfs_trans_ail_update takes an array of log items that all need to be |
| * positioned at the same LSN in the AIL. If an item is not in the AIL, it will |
| * be added. Otherwise, it will be repositioned by removing it and re-adding |
| * it to the AIL. If we move the first item in the AIL, update the log tail to |
| * match the new minimum LSN in the AIL. |
| * |
| * This function takes the AIL lock once to execute the update operations on |
| * all the items in the array, and as such should not be called with the AIL |
| * lock held. As a result, once we have the AIL lock, we need to check each log |
| * item LSN to confirm it needs to be moved forward in the AIL. |
| * |
| * To optimise the insert operation, we delete all the items from the AIL in |
| * the first pass, moving them into a temporary list, then splice the temporary |
| * list into the correct position in the AIL. This avoids needing to do an |
| * insert operation on every item. |
| * |
| * This function must be called with the AIL lock held. The lock is dropped |
| * before returning. |
| */ |
| void |
| xfs_trans_ail_update_bulk( |
| struct xfs_ail *ailp, |
| struct xfs_ail_cursor *cur, |
| struct xfs_log_item **log_items, |
| int nr_items, |
| xfs_lsn_t lsn) __releases(ailp->xa_lock) |
| { |
| xfs_log_item_t *mlip; |
| int mlip_changed = 0; |
| int i; |
| LIST_HEAD(tmp); |
| |
| ASSERT(nr_items > 0); /* Not required, but true. */ |
| mlip = xfs_ail_min(ailp); |
| |
| for (i = 0; i < nr_items; i++) { |
| struct xfs_log_item *lip = log_items[i]; |
| if (lip->li_flags & XFS_LI_IN_AIL) { |
| /* check if we really need to move the item */ |
| if (XFS_LSN_CMP(lsn, lip->li_lsn) <= 0) |
| continue; |
| |
| trace_xfs_ail_move(lip, lip->li_lsn, lsn); |
| xfs_ail_delete(ailp, lip); |
| if (mlip == lip) |
| mlip_changed = 1; |
| } else { |
| lip->li_flags |= XFS_LI_IN_AIL; |
| trace_xfs_ail_insert(lip, 0, lsn); |
| } |
| lip->li_lsn = lsn; |
| list_add(&lip->li_ail, &tmp); |
| } |
| |
| if (!list_empty(&tmp)) |
| xfs_ail_splice(ailp, cur, &tmp, lsn); |
| |
| if (mlip_changed) { |
| if (!XFS_FORCED_SHUTDOWN(ailp->xa_mount)) |
| xlog_assign_tail_lsn_locked(ailp->xa_mount); |
| spin_unlock(&ailp->xa_lock); |
| |
| xfs_log_space_wake(ailp->xa_mount); |
| } else { |
| spin_unlock(&ailp->xa_lock); |
| } |
| } |
| |
| /* |
| * xfs_trans_ail_delete_bulk - remove multiple log items from the AIL |
| * |
| * @xfs_trans_ail_delete_bulk takes an array of log items that all need to |
| * removed from the AIL. The caller is already holding the AIL lock, and done |
| * all the checks necessary to ensure the items passed in via @log_items are |
| * ready for deletion. This includes checking that the items are in the AIL. |
| * |
| * For each log item to be removed, unlink it from the AIL, clear the IN_AIL |
| * flag from the item and reset the item's lsn to 0. If we remove the first |
| * item in the AIL, update the log tail to match the new minimum LSN in the |
| * AIL. |
| * |
| * This function will not drop the AIL lock until all items are removed from |
| * the AIL to minimise the amount of lock traffic on the AIL. This does not |
| * greatly increase the AIL hold time, but does significantly reduce the amount |
| * of traffic on the lock, especially during IO completion. |
| * |
| * This function must be called with the AIL lock held. The lock is dropped |
| * before returning. |
| */ |
| void |
| xfs_trans_ail_delete_bulk( |
| struct xfs_ail *ailp, |
| struct xfs_log_item **log_items, |
| int nr_items, |
| int shutdown_type) __releases(ailp->xa_lock) |
| { |
| xfs_log_item_t *mlip; |
| int mlip_changed = 0; |
| int i; |
| |
| mlip = xfs_ail_min(ailp); |
| |
| for (i = 0; i < nr_items; i++) { |
| struct xfs_log_item *lip = log_items[i]; |
| if (!(lip->li_flags & XFS_LI_IN_AIL)) { |
| struct xfs_mount *mp = ailp->xa_mount; |
| |
| spin_unlock(&ailp->xa_lock); |
| if (!XFS_FORCED_SHUTDOWN(mp)) { |
| xfs_alert_tag(mp, XFS_PTAG_AILDELETE, |
| "%s: attempting to delete a log item that is not in the AIL", |
| __func__); |
| xfs_force_shutdown(mp, shutdown_type); |
| } |
| return; |
| } |
| |
| trace_xfs_ail_delete(lip, mlip->li_lsn, lip->li_lsn); |
| xfs_ail_delete(ailp, lip); |
| lip->li_flags &= ~XFS_LI_IN_AIL; |
| lip->li_lsn = 0; |
| if (mlip == lip) |
| mlip_changed = 1; |
| } |
| |
| if (mlip_changed) { |
| if (!XFS_FORCED_SHUTDOWN(ailp->xa_mount)) |
| xlog_assign_tail_lsn_locked(ailp->xa_mount); |
| if (list_empty(&ailp->xa_ail)) |
| wake_up_all(&ailp->xa_empty); |
| spin_unlock(&ailp->xa_lock); |
| |
| xfs_log_space_wake(ailp->xa_mount); |
| } else { |
| spin_unlock(&ailp->xa_lock); |
| } |
| } |
| |
| int |
| xfs_trans_ail_init( |
| xfs_mount_t *mp) |
| { |
| struct xfs_ail *ailp; |
| |
| ailp = kmem_zalloc(sizeof(struct xfs_ail), KM_MAYFAIL); |
| if (!ailp) |
| return -ENOMEM; |
| |
| ailp->xa_mount = mp; |
| INIT_LIST_HEAD(&ailp->xa_ail); |
| INIT_LIST_HEAD(&ailp->xa_cursors); |
| spin_lock_init(&ailp->xa_lock); |
| INIT_LIST_HEAD(&ailp->xa_buf_list); |
| init_waitqueue_head(&ailp->xa_empty); |
| |
| ailp->xa_task = kthread_run(xfsaild, ailp, "xfsaild/%s", |
| ailp->xa_mount->m_fsname); |
| if (IS_ERR(ailp->xa_task)) |
| goto out_free_ailp; |
| |
| mp->m_ail = ailp; |
| return 0; |
| |
| out_free_ailp: |
| kmem_free(ailp); |
| return -ENOMEM; |
| } |
| |
| void |
| xfs_trans_ail_destroy( |
| xfs_mount_t *mp) |
| { |
| struct xfs_ail *ailp = mp->m_ail; |
| |
| kthread_stop(ailp->xa_task); |
| kmem_free(ailp); |
| } |