[PATCH] powermac: Combined fixes for backlight code
This patch fixes several problems:
- pmac_backlight_key() is called under interrupt context, and therefore
can't use mutexes or semaphores, so defer the backlight level for
later, as it's not critical (original code by Aristeu S. Rozanski F.
<aris@valeta.org>).
- Add exports for functions that might be called from modules
- Fix Kconfig depdencies on PMAC_BACKLIGHT.
- Fix locking issues on calls from inside the driver (reported by
Aristeu S. Rozanski F., too)
- Fix wrong calculation of backlight values in some of the drivers
- Replace pmac_backlight_key_up/down by inline functions
[akpm@osdl.org: fix function prototypes]
Signed-off-by: Michael Hanselmann <linux-kernel@hansmi.ch>
Acked-by: Aristeu S. Rozanski F. <aris@valeta.org>
Acked-by: Rene Nussbaumer <linux-kernel@killerfox.forkbomb.ch>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
index 1006f12..c64a717 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/aty/aty128fb.c
@@ -455,6 +455,7 @@
static void wait_for_fifo(u16 entries, struct aty128fb_par *par);
static void wait_for_idle(struct aty128fb_par *par);
static u32 depth_to_dst(u32 depth);
+static void aty128_bl_set_power(struct fb_info *info, int power);
#define BIOS_IN8(v) (readb(bios + (v)))
#define BIOS_IN16(v) (readb(bios + (v)) | \
@@ -1257,25 +1258,11 @@
reg &= ~LVDS_DISPLAY_DIS;
aty_st_le32(LVDS_GEN_CNTL, reg);
#ifdef CONFIG_FB_ATY128_BACKLIGHT
- mutex_lock(&info->bl_mutex);
- if (info->bl_dev) {
- down(&info->bl_dev->sem);
- info->bl_dev->props->update_status(info->bl_dev);
- up(&info->bl_dev->sem);
- }
- mutex_unlock(&info->bl_mutex);
+ aty128_bl_set_power(info, FB_BLANK_UNBLANK);
#endif
} else {
#ifdef CONFIG_FB_ATY128_BACKLIGHT
- mutex_lock(&info->bl_mutex);
- if (info->bl_dev) {
- down(&info->bl_dev->sem);
- info->bl_dev->props->brightness = 0;
- info->bl_dev->props->power = FB_BLANK_POWERDOWN;
- info->bl_dev->props->update_status(info->bl_dev);
- up(&info->bl_dev->sem);
- }
- mutex_unlock(&info->bl_mutex);
+ aty128_bl_set_power(info, FB_BLANK_POWERDOWN);
#endif
reg = aty_ld_le32(LVDS_GEN_CNTL);
reg |= LVDS_DISPLAY_DIS;
@@ -1702,6 +1689,7 @@
static struct backlight_properties aty128_bl_data;
+/* Call with fb_info->bl_mutex held */
static int aty128_bl_get_level_brightness(struct aty128fb_par *par,
int level)
{
@@ -1709,10 +1697,8 @@
int atylevel;
/* Get and convert the value */
- mutex_lock(&info->bl_mutex);
atylevel = MAX_LEVEL -
(info->bl_curve[level] * FB_BACKLIGHT_MAX / MAX_LEVEL);
- mutex_unlock(&info->bl_mutex);
if (atylevel < 0)
atylevel = 0;
@@ -1730,7 +1716,8 @@
/* That one prevents proper CRT output with LCD off */
#undef BACKLIGHT_DAC_OFF
-static int aty128_bl_update_status(struct backlight_device *bd)
+/* Call with fb_info->bl_mutex held */
+static int __aty128_bl_update_status(struct backlight_device *bd)
{
struct aty128fb_par *par = class_get_devdata(&bd->class_dev);
unsigned int reg = aty_ld_le32(LVDS_GEN_CNTL);
@@ -1783,6 +1770,19 @@
return 0;
}
+static int aty128_bl_update_status(struct backlight_device *bd)
+{
+ struct aty128fb_par *par = class_get_devdata(&bd->class_dev);
+ struct fb_info *info = pci_get_drvdata(par->pdev);
+ int ret;
+
+ mutex_lock(&info->bl_mutex);
+ ret = __aty128_bl_update_status(bd);
+ mutex_unlock(&info->bl_mutex);
+
+ return ret;
+}
+
static int aty128_bl_get_brightness(struct backlight_device *bd)
{
return bd->props->brightness;
@@ -1795,6 +1795,16 @@
.max_brightness = (FB_BACKLIGHT_LEVELS - 1),
};
+static void aty128_bl_set_power(struct fb_info *info, int power)
+{
+ mutex_lock(&info->bl_mutex);
+ up(&info->bl_dev->sem);
+ info->bl_dev->props->power = power;
+ __aty128_bl_update_status(info->bl_dev);
+ down(&info->bl_dev->sem);
+ mutex_unlock(&info->bl_mutex);
+}
+
static void aty128_bl_init(struct aty128fb_par *par)
{
struct fb_info *info = pci_get_drvdata(par->pdev);
@@ -2197,12 +2207,8 @@
return 0;
#ifdef CONFIG_FB_ATY128_BACKLIGHT
- if (machine_is(powermac) && blank) {
- down(&fb->bl_dev->sem);
- fb->bl_dev->props->power = FB_BLANK_POWERDOWN;
- fb->bl_dev->props->update_status(fb->bl_dev);
- up(&fb->bl_dev->sem);
- }
+ if (machine_is(powermac) && blank)
+ aty128_bl_set_power(fb, FB_BLANK_POWERDOWN);
#endif
if (blank & FB_BLANK_VSYNC_SUSPEND)
@@ -2218,14 +2224,12 @@
aty128_set_crt_enable(par, par->crt_on && !blank);
aty128_set_lcd_enable(par, par->lcd_on && !blank);
}
+
#ifdef CONFIG_FB_ATY128_BACKLIGHT
- if (machine_is(powermac) && !blank) {
- down(&fb->bl_dev->sem);
- fb->bl_dev->props->power = FB_BLANK_UNBLANK;
- fb->bl_dev->props->update_status(fb->bl_dev);
- up(&fb->bl_dev->sem);
- }
+ if (machine_is(powermac) && !blank)
+ aty128_bl_set_power(fb, FB_BLANK_UNBLANK);
#endif
+
return 0;
}