arch/mips/au1000/common/power.c - kernel/msm-4.9 - Gitiles

 /*
  * BRIEF MODULE DESCRIPTION
  *	Au1000 Power Management routines.
  *
  * Copyright 2001 MontaVista Software Inc.
  * Author: MontaVista Software, Inc.
  *		ppopov@mvista.com or source@mvista.com
  *
  *  Some of the routines are right out of init/main.c, whose
  *  copyrights apply here.
  *
  *  This program is free software; you can redistribute	 it and/or modify it
  *  under  the terms of	 the GNU General  Public License as published by the
  *  Free Software Foundation;  either version 2 of the	License, or (at your
  *  option) any later version.
  *
  *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
  *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
  *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
  *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
  *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
  *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
  *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
  *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  *  You should have received a copy of the  GNU General Public License along
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 #include <linux/config.h>
 #include <linux/init.h>
 #include <linux/pm.h>
 #include <linux/pm_legacy.h>
 #include <linux/slab.h>
 #include <linux/sysctl.h>
 #include <linux/jiffies.h>

 #include <asm/string.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include <asm/system.h>
 #include <asm/cacheflush.h>
 #include <asm/mach-au1x00/au1000.h>

 #ifdef CONFIG_PM

 #define DEBUG 1
 #ifdef DEBUG
 #  define DPRINTK(fmt, args...)	printk("%s: " fmt, __FUNCTION__ , ## args)
 #else
 #  define DPRINTK(fmt, args...)
 #endif

 static void au1000_calibrate_delay(void);

 extern void set_au1x00_speed(unsigned int new_freq);
 extern unsigned int get_au1x00_speed(void);
 extern unsigned long get_au1x00_uart_baud_base(void);
 extern void set_au1x00_uart_baud_base(unsigned long new_baud_base);
 extern unsigned long save_local_and_disable(int controller);
 extern void restore_local_and_enable(int controller, unsigned long mask);
 extern void local_enable_irq(unsigned int irq_nr);

 /* Quick acpi hack. This will have to change! */
 #define	CTL_ACPI 9999
 #define	ACPI_S1_SLP_TYP 19
 #define	ACPI_SLEEP 21


 static DEFINE_SPINLOCK(pm_lock);

 /* We need to save/restore a bunch of core registers that are
  * either volatile or reset to some state across a processor sleep.
  * If reading a register doesn't provide a proper result for a
  * later restore, we have to provide a function for loading that
  * register and save a copy.
  *
  * We only have to save/restore registers that aren't otherwise
  * done as part of a driver pm_* function.
  */
 static unsigned int	sleep_aux_pll_cntrl;
 static unsigned int	sleep_cpu_pll_cntrl;
 static unsigned int	sleep_pin_function;
 static unsigned int	sleep_uart0_inten;
 static unsigned int	sleep_uart0_fifoctl;
 static unsigned int	sleep_uart0_linectl;
 static unsigned int	sleep_uart0_clkdiv;
 static unsigned int	sleep_uart0_enable;
 static unsigned int	sleep_usbhost_enable;
 static unsigned int	sleep_usbdev_enable;
 static unsigned int	sleep_static_memctlr[4][3];

 /* Define this to cause the value you write to /proc/sys/pm/sleep to
  * set the TOY timer for the amount of time you want to sleep.
  * This is done mainly for testing, but may be useful in other cases.
  * The value is number of 32KHz ticks to sleep.
  */
 #define SLEEP_TEST_TIMEOUT 1
 #ifdef SLEEP_TEST_TIMEOUT
 static	int	sleep_ticks;
 void wakeup_counter0_set(int ticks);
 #endif

 static void
 save_core_regs(void)
 {
 	extern void save_au1xxx_intctl(void);
 	extern void pm_eth0_shutdown(void);

 	/* Do the serial ports.....these really should be a pm_*
 	 * registered function by the driver......but of course the
 	 * standard serial driver doesn't understand our Au1xxx
 	 * unique registers.
 	 */
 	sleep_uart0_inten = au_readl(UART0_ADDR + UART_IER);
 	sleep_uart0_fifoctl = au_readl(UART0_ADDR + UART_FCR);
 	sleep_uart0_linectl = au_readl(UART0_ADDR + UART_LCR);
 	sleep_uart0_clkdiv = au_readl(UART0_ADDR + UART_CLK);
 	sleep_uart0_enable = au_readl(UART0_ADDR + UART_MOD_CNTRL);

 	/* Shutdown USB host/device.
 	*/
 	sleep_usbhost_enable = au_readl(USB_HOST_CONFIG);

 	/* There appears to be some undocumented reset register....
 	*/
 	au_writel(0, 0xb0100004); au_sync();
 	au_writel(0, USB_HOST_CONFIG); au_sync();

 	sleep_usbdev_enable = au_readl(USBD_ENABLE);
 	au_writel(0, USBD_ENABLE); au_sync();

 	/* Save interrupt controller state.
 	*/
 	save_au1xxx_intctl();

 	/* Clocks and PLLs.
 	*/
 	sleep_aux_pll_cntrl = au_readl(SYS_AUXPLL);

 	/* We don't really need to do this one, but unless we
 	 * write it again it won't have a valid value if we
 	 * happen to read it.
 	 */
 	sleep_cpu_pll_cntrl = au_readl(SYS_CPUPLL);

 	sleep_pin_function = au_readl(SYS_PINFUNC);

 	/* Save the static memory controller configuration.
 	*/
 	sleep_static_memctlr[0][0] = au_readl(MEM_STCFG0);
 	sleep_static_memctlr[0][1] = au_readl(MEM_STTIME0);
 	sleep_static_memctlr[0][2] = au_readl(MEM_STADDR0);
 	sleep_static_memctlr[1][0] = au_readl(MEM_STCFG1);
 	sleep_static_memctlr[1][1] = au_readl(MEM_STTIME1);
 	sleep_static_memctlr[1][2] = au_readl(MEM_STADDR1);
 	sleep_static_memctlr[2][0] = au_readl(MEM_STCFG2);
 	sleep_static_memctlr[2][1] = au_readl(MEM_STTIME2);
 	sleep_static_memctlr[2][2] = au_readl(MEM_STADDR2);
 	sleep_static_memctlr[3][0] = au_readl(MEM_STCFG3);
 	sleep_static_memctlr[3][1] = au_readl(MEM_STTIME3);
 	sleep_static_memctlr[3][2] = au_readl(MEM_STADDR3);
 }

 static void
 restore_core_regs(void)
 {
 	extern void restore_au1xxx_intctl(void);
 	extern void wakeup_counter0_adjust(void);

 	au_writel(sleep_aux_pll_cntrl, SYS_AUXPLL); au_sync();
 	au_writel(sleep_cpu_pll_cntrl, SYS_CPUPLL); au_sync();
 	au_writel(sleep_pin_function, SYS_PINFUNC); au_sync();

 	/* Restore the static memory controller configuration.
 	*/
 	au_writel(sleep_static_memctlr[0][0], MEM_STCFG0);
 	au_writel(sleep_static_memctlr[0][1], MEM_STTIME0);
 	au_writel(sleep_static_memctlr[0][2], MEM_STADDR0);
 	au_writel(sleep_static_memctlr[1][0], MEM_STCFG1);
 	au_writel(sleep_static_memctlr[1][1], MEM_STTIME1);
 	au_writel(sleep_static_memctlr[1][2], MEM_STADDR1);
 	au_writel(sleep_static_memctlr[2][0], MEM_STCFG2);
 	au_writel(sleep_static_memctlr[2][1], MEM_STTIME2);
 	au_writel(sleep_static_memctlr[2][2], MEM_STADDR2);
 	au_writel(sleep_static_memctlr[3][0], MEM_STCFG3);
 	au_writel(sleep_static_memctlr[3][1], MEM_STTIME3);
 	au_writel(sleep_static_memctlr[3][2], MEM_STADDR3);

 	/* Enable the UART if it was enabled before sleep.
 	 * I guess I should define module control bits........
 	 */
 	if (sleep_uart0_enable & 0x02) {
 		au_writel(0, UART0_ADDR + UART_MOD_CNTRL); au_sync();
 		au_writel(1, UART0_ADDR + UART_MOD_CNTRL); au_sync();
 		au_writel(3, UART0_ADDR + UART_MOD_CNTRL); au_sync();
 		au_writel(sleep_uart0_inten, UART0_ADDR + UART_IER); au_sync();
 		au_writel(sleep_uart0_fifoctl, UART0_ADDR + UART_FCR); au_sync();
 		au_writel(sleep_uart0_linectl, UART0_ADDR + UART_LCR); au_sync();
 		au_writel(sleep_uart0_clkdiv, UART0_ADDR + UART_CLK); au_sync();
 	}

 	restore_au1xxx_intctl();
 	wakeup_counter0_adjust();
 }

 unsigned long suspend_mode;

 void wakeup_from_suspend(void)
 {
 	suspend_mode = 0;
 }

 int au_sleep(void)
 {
 	unsigned long wakeup, flags;
 	extern	void	save_and_sleep(void);

 	spin_lock_irqsave(&pm_lock,flags);

 	save_core_regs();

 	flush_cache_all();

 	/** The code below is all system dependent and we should probably
 	 ** have a function call out of here to set this up.  You need
 	 ** to configure the GPIO or timer interrupts that will bring
 	 ** you out of sleep.
 	 ** For testing, the TOY counter wakeup is useful.
 	 **/

 #if 0
 	au_writel(au_readl(SYS_PINSTATERD) & ~(1 << 11), SYS_PINSTATERD);

 	/* gpio 6 can cause a wake up event */
 	wakeup = au_readl(SYS_WAKEMSK);
 	wakeup &= ~(1 << 8);	/* turn off match20 wakeup */
 	wakeup |= 1 << 6;	/* turn on gpio 6 wakeup   */
 #else
 	/* For testing, allow match20 to wake us up.
 	*/
 #ifdef SLEEP_TEST_TIMEOUT
 	wakeup_counter0_set(sleep_ticks);
 #endif
 	wakeup = 1 << 8;	/* turn on match20 wakeup   */
 	wakeup = 0;
 #endif
 	au_writel(1, SYS_WAKESRC);	/* clear cause */
 	au_sync();
 	au_writel(wakeup, SYS_WAKEMSK);
 	au_sync();

 	save_and_sleep();

 	/* after a wakeup, the cpu vectors back to 0x1fc00000 so
 	 * it's up to the boot code to get us back here.
 	 */
 	restore_core_regs();
 	spin_unlock_irqrestore(&pm_lock, flags);
 	return 0;
 }

 static int pm_do_sleep(ctl_table * ctl, int write, struct file *file,
 		       void __user *buffer, size_t * len, loff_t *ppos)
 {
 	int retval = 0;
 #ifdef SLEEP_TEST_TIMEOUT
 #define TMPBUFLEN2 16
 	char buf[TMPBUFLEN2], *p;
 #endif

 	if (!write) {
 		*len = 0;
 	} else {
 #ifdef SLEEP_TEST_TIMEOUT
 		if (*len > TMPBUFLEN2 - 1) {
 			return -EFAULT;
 		}
 		if (copy_from_user(buf, buffer, *len)) {
 			return -EFAULT;
 		}
 		buf[*len] = 0;
 		p = buf;
 		sleep_ticks = simple_strtoul(p, &p, 0);
 #endif
 		retval = pm_send_all(PM_SUSPEND, (void *) 2);

 		if (retval)
 			return retval;

 		au_sleep();
 		retval = pm_send_all(PM_RESUME, (void *) 0);
 	}
 	return retval;
 }

 static int pm_do_suspend(ctl_table * ctl, int write, struct file *file,
 			 void __user *buffer, size_t * len, loff_t *ppos)
 {
 	int retval = 0;

 	if (!write) {
 		*len = 0;
 	} else {
 		retval = pm_send_all(PM_SUSPEND, (void *) 2);
 		if (retval)
 			return retval;
 		suspend_mode = 1;

 		retval = pm_send_all(PM_RESUME, (void *) 0);
 	}
 	return retval;
 }


 static int pm_do_freq(ctl_table * ctl, int write, struct file *file,
 		      void __user *buffer, size_t * len, loff_t *ppos)
 {
 	int retval = 0, i;
 	unsigned long val, pll;
 #define TMPBUFLEN 64
 #define MAX_CPU_FREQ 396
 	char buf[TMPBUFLEN], *p;
 	unsigned long flags, intc0_mask, intc1_mask;
 	unsigned long old_baud_base, old_cpu_freq, baud_rate, old_clk,
 	    old_refresh;
 	unsigned long new_baud_base, new_cpu_freq, new_clk, new_refresh;

 	spin_lock_irqsave(&pm_lock, flags);
 	if (!write) {
 		*len = 0;
 	} else {
 		/* Parse the new frequency */
 		if (*len > TMPBUFLEN - 1) {
 			spin_unlock_irqrestore(&pm_lock, flags);
 			return -EFAULT;
 		}
 		if (copy_from_user(buf, buffer, *len)) {
 			spin_unlock_irqrestore(&pm_lock, flags);
 			return -EFAULT;
 		}
 		buf[*len] = 0;
 		p = buf;
 		val = simple_strtoul(p, &p, 0);
 		if (val > MAX_CPU_FREQ) {
 			spin_unlock_irqrestore(&pm_lock, flags);
 			return -EFAULT;
 		}

 		pll = val / 12;
 		if ((pll > 33) || (pll < 7)) {	/* 396 MHz max, 84 MHz min */
 			/* revisit this for higher speed cpus */
 			spin_unlock_irqrestore(&pm_lock, flags);
 			return -EFAULT;
 		}

 		old_baud_base = get_au1x00_uart_baud_base();
 		old_cpu_freq = get_au1x00_speed();

 		new_cpu_freq = pll * 12 * 1000000;
 	        new_baud_base =  (new_cpu_freq / (2 * ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2) * 16));
 		set_au1x00_speed(new_cpu_freq);
 		set_au1x00_uart_baud_base(new_baud_base);

 		old_refresh = au_readl(MEM_SDREFCFG) & 0x1ffffff;
 		new_refresh =
 		    ((old_refresh * new_cpu_freq) /
 		     old_cpu_freq) | (au_readl(MEM_SDREFCFG) & ~0x1ffffff);

 		au_writel(pll, SYS_CPUPLL);
 		au_sync_delay(1);
 		au_writel(new_refresh, MEM_SDREFCFG);
 		au_sync_delay(1);

 		for (i = 0; i < 4; i++) {
 			if (au_readl
 			    (UART_BASE + UART_MOD_CNTRL +
 			     i * 0x00100000) == 3) {
 				old_clk =
 				    au_readl(UART_BASE + UART_CLK +
 					  i * 0x00100000);
 				// baud_rate = baud_base/clk
 				baud_rate = old_baud_base / old_clk;
 				/* we won't get an exact baud rate and the error
 				 * could be significant enough that our new
 				 * calculation will result in a clock that will
 				 * give us a baud rate that's too far off from
 				 * what we really want.
 				 */
 				if (baud_rate > 100000)
 					baud_rate = 115200;
 				else if (baud_rate > 50000)
 					baud_rate = 57600;
 				else if (baud_rate > 30000)
 					baud_rate = 38400;
 				else if (baud_rate > 17000)
 					baud_rate = 19200;
 				else
 					(baud_rate = 9600);
 				// new_clk = new_baud_base/baud_rate
 				new_clk = new_baud_base / baud_rate;
 				au_writel(new_clk,
 				       UART_BASE + UART_CLK +
 				       i * 0x00100000);
 				au_sync_delay(10);
 			}
 		}
 	}


 	/* We don't want _any_ interrupts other than
 	 * match20. Otherwise our au1000_calibrate_delay()
 	 * calculation will be off, potentially a lot.
 	 */
 	intc0_mask = save_local_and_disable(0);
 	intc1_mask = save_local_and_disable(1);
 	local_enable_irq(AU1000_TOY_MATCH2_INT);
 	spin_unlock_irqrestore(&pm_lock, flags);
 	au1000_calibrate_delay();
 	restore_local_and_enable(0, intc0_mask);
 	restore_local_and_enable(1, intc1_mask);
 	return retval;
 }


 static struct ctl_table pm_table[] = {
 	{ACPI_S1_SLP_TYP, "suspend", NULL, 0, 0600, NULL, &pm_do_suspend},
 	{ACPI_SLEEP, "sleep", NULL, 0, 0600, NULL, &pm_do_sleep},
 	{CTL_ACPI, "freq", NULL, 0, 0600, NULL, &pm_do_freq},
 	{0}
 };

 static struct ctl_table pm_dir_table[] = {
 	{CTL_ACPI, "pm", NULL, 0, 0555, pm_table},
 	{0}
 };

 /*
  * Initialize power interface
  */
 static int __init pm_init(void)
 {
 	register_sysctl_table(pm_dir_table, 1);
 	return 0;
 }

 __initcall(pm_init);


 /*
  * This is right out of init/main.c
  */

 /* This is the number of bits of precision for the loops_per_jiffy.  Each
    bit takes on average 1.5/HZ seconds.  This (like the original) is a little
    better than 1% */
 #define LPS_PREC 8

 static void au1000_calibrate_delay(void)
 {
 	unsigned long ticks, loopbit;
 	int lps_precision = LPS_PREC;

 	loops_per_jiffy = (1 << 12);

 	while (loops_per_jiffy <<= 1) {
 		/* wait for "start of" clock tick */
 		ticks = jiffies;
 		while (ticks == jiffies)
 			/* nothing */ ;
 		/* Go .. */
 		ticks = jiffies;
 		__delay(loops_per_jiffy);
 		ticks = jiffies - ticks;
 		if (ticks)
 			break;
 	}

 /* Do a binary approximation to get loops_per_jiffy set to equal one clock
    (up to lps_precision bits) */
 	loops_per_jiffy >>= 1;
 	loopbit = loops_per_jiffy;
 	while (lps_precision-- && (loopbit >>= 1)) {
 		loops_per_jiffy |= loopbit;
 		ticks = jiffies;
 		while (ticks == jiffies);
 		ticks = jiffies;
 		__delay(loops_per_jiffy);
 		if (jiffies != ticks)	/* longer than 1 tick */
 			loops_per_jiffy &= ~loopbit;
 	}
 }
 #endif				/* CONFIG_PM */
	/*
	* BRIEF MODULE DESCRIPTION
	* Au1000 Power Management routines.
	*
	* Copyright 2001 MontaVista Software Inc.
	* Author: MontaVista Software, Inc.
	* ppopov@mvista.com or source@mvista.com
	*
	* Some of the routines are right out of init/main.c, whose
	* copyrights apply here.
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms of the GNU General Public License as published by the
	* Free Software Foundation; either version 2 of the License, or (at your
	* option) any later version.
	*
	* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
	* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
	* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
	* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
	* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
	* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
	* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
	* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
	* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*
	* You should have received a copy of the GNU General Public License along
	* with this program; if not, write to the Free Software Foundation, Inc.,
	* 675 Mass Ave, Cambridge, MA 02139, USA.
	*/
	#include <linux/config.h>
	#include <linux/init.h>
	#include <linux/pm.h>
	#include <linux/pm_legacy.h>
	#include <linux/slab.h>
	#include <linux/sysctl.h>
	#include <linux/jiffies.h>

	#include <asm/string.h>
	#include <asm/uaccess.h>
	#include <asm/io.h>
	#include <asm/system.h>
	#include <asm/cacheflush.h>
	#include <asm/mach-au1x00/au1000.h>

	#ifdef CONFIG_PM

	#define DEBUG 1
	#ifdef DEBUG
	# define DPRINTK(fmt, args...) printk("%s: " fmt, __FUNCTION__ , ## args)
	#else
	# define DPRINTK(fmt, args...)
	#endif

	static void au1000_calibrate_delay(void);

	extern void set_au1x00_speed(unsigned int new_freq);
	extern unsigned int get_au1x00_speed(void);
	extern unsigned long get_au1x00_uart_baud_base(void);
	extern void set_au1x00_uart_baud_base(unsigned long new_baud_base);
	extern unsigned long save_local_and_disable(int controller);
	extern void restore_local_and_enable(int controller, unsigned long mask);
	extern void local_enable_irq(unsigned int irq_nr);

	/* Quick acpi hack. This will have to change! */
	#define CTL_ACPI 9999
	#define ACPI_S1_SLP_TYP 19
	#define ACPI_SLEEP 21


	static DEFINE_SPINLOCK(pm_lock);

	/* We need to save/restore a bunch of core registers that are
	* either volatile or reset to some state across a processor sleep.
	* If reading a register doesn't provide a proper result for a
	* later restore, we have to provide a function for loading that
	* register and save a copy.
	*
	* We only have to save/restore registers that aren't otherwise
	* done as part of a driver pm_* function.
	*/
	static unsigned int sleep_aux_pll_cntrl;
	static unsigned int sleep_cpu_pll_cntrl;
	static unsigned int sleep_pin_function;
	static unsigned int sleep_uart0_inten;
	static unsigned int sleep_uart0_fifoctl;
	static unsigned int sleep_uart0_linectl;
	static unsigned int sleep_uart0_clkdiv;
	static unsigned int sleep_uart0_enable;
	static unsigned int sleep_usbhost_enable;
	static unsigned int sleep_usbdev_enable;
	static unsigned int sleep_static_memctlr[4][3];

	/* Define this to cause the value you write to /proc/sys/pm/sleep to
	* set the TOY timer for the amount of time you want to sleep.
	* This is done mainly for testing, but may be useful in other cases.
	* The value is number of 32KHz ticks to sleep.
	*/
	#define SLEEP_TEST_TIMEOUT 1
	#ifdef SLEEP_TEST_TIMEOUT
	static int sleep_ticks;
	void wakeup_counter0_set(int ticks);
	#endif

	static void
	save_core_regs(void)
	{
	extern void save_au1xxx_intctl(void);
	extern void pm_eth0_shutdown(void);

	/* Do the serial ports.....these really should be a pm_*
	* registered function by the driver......but of course the
	* standard serial driver doesn't understand our Au1xxx
	* unique registers.
	*/
	sleep_uart0_inten = au_readl(UART0_ADDR + UART_IER);
	sleep_uart0_fifoctl = au_readl(UART0_ADDR + UART_FCR);
	sleep_uart0_linectl = au_readl(UART0_ADDR + UART_LCR);
	sleep_uart0_clkdiv = au_readl(UART0_ADDR + UART_CLK);
	sleep_uart0_enable = au_readl(UART0_ADDR + UART_MOD_CNTRL);

	/* Shutdown USB host/device.
	*/
	sleep_usbhost_enable = au_readl(USB_HOST_CONFIG);

	/* There appears to be some undocumented reset register....
	*/
	au_writel(0, 0xb0100004); au_sync();
	au_writel(0, USB_HOST_CONFIG); au_sync();

	sleep_usbdev_enable = au_readl(USBD_ENABLE);
	au_writel(0, USBD_ENABLE); au_sync();

	/* Save interrupt controller state.
	*/
	save_au1xxx_intctl();

	/* Clocks and PLLs.
	*/
	sleep_aux_pll_cntrl = au_readl(SYS_AUXPLL);

	/* We don't really need to do this one, but unless we
	* write it again it won't have a valid value if we
	* happen to read it.
	*/
	sleep_cpu_pll_cntrl = au_readl(SYS_CPUPLL);

	sleep_pin_function = au_readl(SYS_PINFUNC);

	/* Save the static memory controller configuration.
	*/
	sleep_static_memctlr[0][0] = au_readl(MEM_STCFG0);
	sleep_static_memctlr[0][1] = au_readl(MEM_STTIME0);
	sleep_static_memctlr[0][2] = au_readl(MEM_STADDR0);
	sleep_static_memctlr[1][0] = au_readl(MEM_STCFG1);
	sleep_static_memctlr[1][1] = au_readl(MEM_STTIME1);
	sleep_static_memctlr[1][2] = au_readl(MEM_STADDR1);
	sleep_static_memctlr[2][0] = au_readl(MEM_STCFG2);
	sleep_static_memctlr[2][1] = au_readl(MEM_STTIME2);
	sleep_static_memctlr[2][2] = au_readl(MEM_STADDR2);
	sleep_static_memctlr[3][0] = au_readl(MEM_STCFG3);
	sleep_static_memctlr[3][1] = au_readl(MEM_STTIME3);
	sleep_static_memctlr[3][2] = au_readl(MEM_STADDR3);
	}

	static void
	restore_core_regs(void)
	{
	extern void restore_au1xxx_intctl(void);
	extern void wakeup_counter0_adjust(void);

	au_writel(sleep_aux_pll_cntrl, SYS_AUXPLL); au_sync();
	au_writel(sleep_cpu_pll_cntrl, SYS_CPUPLL); au_sync();
	au_writel(sleep_pin_function, SYS_PINFUNC); au_sync();

	/* Restore the static memory controller configuration.
	*/
	au_writel(sleep_static_memctlr[0][0], MEM_STCFG0);
	au_writel(sleep_static_memctlr[0][1], MEM_STTIME0);
	au_writel(sleep_static_memctlr[0][2], MEM_STADDR0);
	au_writel(sleep_static_memctlr[1][0], MEM_STCFG1);
	au_writel(sleep_static_memctlr[1][1], MEM_STTIME1);
	au_writel(sleep_static_memctlr[1][2], MEM_STADDR1);
	au_writel(sleep_static_memctlr[2][0], MEM_STCFG2);
	au_writel(sleep_static_memctlr[2][1], MEM_STTIME2);
	au_writel(sleep_static_memctlr[2][2], MEM_STADDR2);
	au_writel(sleep_static_memctlr[3][0], MEM_STCFG3);
	au_writel(sleep_static_memctlr[3][1], MEM_STTIME3);
	au_writel(sleep_static_memctlr[3][2], MEM_STADDR3);

	/* Enable the UART if it was enabled before sleep.
	* I guess I should define module control bits........
	*/
	if (sleep_uart0_enable & 0x02) {
	au_writel(0, UART0_ADDR + UART_MOD_CNTRL); au_sync();
	au_writel(1, UART0_ADDR + UART_MOD_CNTRL); au_sync();
	au_writel(3, UART0_ADDR + UART_MOD_CNTRL); au_sync();
	au_writel(sleep_uart0_inten, UART0_ADDR + UART_IER); au_sync();
	au_writel(sleep_uart0_fifoctl, UART0_ADDR + UART_FCR); au_sync();
	au_writel(sleep_uart0_linectl, UART0_ADDR + UART_LCR); au_sync();
	au_writel(sleep_uart0_clkdiv, UART0_ADDR + UART_CLK); au_sync();
	}

	restore_au1xxx_intctl();
	wakeup_counter0_adjust();
	}

	unsigned long suspend_mode;

	void wakeup_from_suspend(void)
	{
	suspend_mode = 0;
	}

	int au_sleep(void)
	{
	unsigned long wakeup, flags;
	extern void save_and_sleep(void);

	spin_lock_irqsave(&pm_lock,flags);

	save_core_regs();

	flush_cache_all();

	/** The code below is all system dependent and we should probably
	** have a function call out of here to set this up. You need
	** to configure the GPIO or timer interrupts that will bring
	** you out of sleep.
	** For testing, the TOY counter wakeup is useful.
	**/

	#if 0
	au_writel(au_readl(SYS_PINSTATERD) & ~(1 << 11), SYS_PINSTATERD);

	/* gpio 6 can cause a wake up event */
	wakeup = au_readl(SYS_WAKEMSK);
	wakeup &= ~(1 << 8); /* turn off match20 wakeup */
	wakeup \|= 1 << 6; /* turn on gpio 6 wakeup */
	#else
	/* For testing, allow match20 to wake us up.
	*/
	#ifdef SLEEP_TEST_TIMEOUT
	wakeup_counter0_set(sleep_ticks);
	#endif
	wakeup = 1 << 8; /* turn on match20 wakeup */
	wakeup = 0;
	#endif
	au_writel(1, SYS_WAKESRC); /* clear cause */
	au_sync();
	au_writel(wakeup, SYS_WAKEMSK);
	au_sync();

	save_and_sleep();

	/* after a wakeup, the cpu vectors back to 0x1fc00000 so
	* it's up to the boot code to get us back here.
	*/
	restore_core_regs();
	spin_unlock_irqrestore(&pm_lock, flags);
	return 0;
	}

	static int pm_do_sleep(ctl_table * ctl, int write, struct file *file,
	void __user buffer, size_t len, loff_t *ppos)
	{
	int retval = 0;
	#ifdef SLEEP_TEST_TIMEOUT
	#define TMPBUFLEN2 16
	char buf[TMPBUFLEN2], *p;
	#endif

	if (!write) {
	*len = 0;
	} else {
	#ifdef SLEEP_TEST_TIMEOUT
	if (*len > TMPBUFLEN2 - 1) {
	return -EFAULT;
	}
	if (copy_from_user(buf, buffer, *len)) {
	return -EFAULT;
	}
	buf[*len] = 0;
	p = buf;
	sleep_ticks = simple_strtoul(p, &p, 0);
	#endif
	retval = pm_send_all(PM_SUSPEND, (void *) 2);

	if (retval)
	return retval;

	au_sleep();
	retval = pm_send_all(PM_RESUME, (void *) 0);
	}
	return retval;
	}

	static int pm_do_suspend(ctl_table * ctl, int write, struct file *file,
	void __user buffer, size_t len, loff_t *ppos)
	{
	int retval = 0;

	if (!write) {
	*len = 0;
	} else {
	retval = pm_send_all(PM_SUSPEND, (void *) 2);
	if (retval)
	return retval;
	suspend_mode = 1;

	retval = pm_send_all(PM_RESUME, (void *) 0);
	}
	return retval;
	}


	static int pm_do_freq(ctl_table * ctl, int write, struct file *file,
	void __user buffer, size_t len, loff_t *ppos)
	{
	int retval = 0, i;
	unsigned long val, pll;
	#define TMPBUFLEN 64
	#define MAX_CPU_FREQ 396
	char buf[TMPBUFLEN], *p;
	unsigned long flags, intc0_mask, intc1_mask;
	unsigned long old_baud_base, old_cpu_freq, baud_rate, old_clk,
	old_refresh;
	unsigned long new_baud_base, new_cpu_freq, new_clk, new_refresh;

	spin_lock_irqsave(&pm_lock, flags);
	if (!write) {
	*len = 0;
	} else {
	/* Parse the new frequency */
	if (*len > TMPBUFLEN - 1) {
	spin_unlock_irqrestore(&pm_lock, flags);
	return -EFAULT;
	}
	if (copy_from_user(buf, buffer, *len)) {
	spin_unlock_irqrestore(&pm_lock, flags);
	return -EFAULT;
	}
	buf[*len] = 0;
	p = buf;
	val = simple_strtoul(p, &p, 0);
	if (val > MAX_CPU_FREQ) {
	spin_unlock_irqrestore(&pm_lock, flags);
	return -EFAULT;
	}

	pll = val / 12;
	if ((pll > 33) \|\| (pll < 7)) { /* 396 MHz max, 84 MHz min */
	/* revisit this for higher speed cpus */
	spin_unlock_irqrestore(&pm_lock, flags);
	return -EFAULT;
	}

	old_baud_base = get_au1x00_uart_baud_base();
	old_cpu_freq = get_au1x00_speed();

	new_cpu_freq = pll * 12 * 1000000;
	new_baud_base = (new_cpu_freq / (2 * ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2) * 16));
	set_au1x00_speed(new_cpu_freq);
	set_au1x00_uart_baud_base(new_baud_base);

	old_refresh = au_readl(MEM_SDREFCFG) & 0x1ffffff;
	new_refresh =
	((old_refresh * new_cpu_freq) /
	old_cpu_freq) \| (au_readl(MEM_SDREFCFG) & ~0x1ffffff);

	au_writel(pll, SYS_CPUPLL);
	au_sync_delay(1);
	au_writel(new_refresh, MEM_SDREFCFG);
	au_sync_delay(1);

	for (i = 0; i < 4; i++) {
	if (au_readl
	(UART_BASE + UART_MOD_CNTRL +
	i * 0x00100000) == 3) {
	old_clk =
	au_readl(UART_BASE + UART_CLK +
	i * 0x00100000);
	// baud_rate = baud_base/clk
	baud_rate = old_baud_base / old_clk;
	/* we won't get an exact baud rate and the error
	* could be significant enough that our new
	* calculation will result in a clock that will
	* give us a baud rate that's too far off from
	* what we really want.
	*/
	if (baud_rate > 100000)
	baud_rate = 115200;
	else if (baud_rate > 50000)
	baud_rate = 57600;
	else if (baud_rate > 30000)
	baud_rate = 38400;
	else if (baud_rate > 17000)
	baud_rate = 19200;
	else
	(baud_rate = 9600);
	// new_clk = new_baud_base/baud_rate
	new_clk = new_baud_base / baud_rate;
	au_writel(new_clk,
	UART_BASE + UART_CLK +
	i * 0x00100000);
	au_sync_delay(10);
	}
	}
	}


	/* We don't want _any_ interrupts other than
	* match20. Otherwise our au1000_calibrate_delay()
	* calculation will be off, potentially a lot.
	*/
	intc0_mask = save_local_and_disable(0);
	intc1_mask = save_local_and_disable(1);
	local_enable_irq(AU1000_TOY_MATCH2_INT);
	spin_unlock_irqrestore(&pm_lock, flags);
	au1000_calibrate_delay();
	restore_local_and_enable(0, intc0_mask);
	restore_local_and_enable(1, intc1_mask);
	return retval;
	}


	static struct ctl_table pm_table[] = {
	{ACPI_S1_SLP_TYP, "suspend", NULL, 0, 0600, NULL, &pm_do_suspend},
	{ACPI_SLEEP, "sleep", NULL, 0, 0600, NULL, &pm_do_sleep},
	{CTL_ACPI, "freq", NULL, 0, 0600, NULL, &pm_do_freq},
	{0}
	};

	static struct ctl_table pm_dir_table[] = {
	{CTL_ACPI, "pm", NULL, 0, 0555, pm_table},
	{0}
	};

	/*
	* Initialize power interface
	*/
	static int __init pm_init(void)
	{
	register_sysctl_table(pm_dir_table, 1);
	return 0;
	}

	__initcall(pm_init);


	/*
	* This is right out of init/main.c
	*/

	/* This is the number of bits of precision for the loops_per_jiffy. Each
	bit takes on average 1.5/HZ seconds. This (like the original) is a little
	better than 1% */
	#define LPS_PREC 8

	static void au1000_calibrate_delay(void)
	{
	unsigned long ticks, loopbit;
	int lps_precision = LPS_PREC;

	loops_per_jiffy = (1 << 12);

	while (loops_per_jiffy <<= 1) {
	/* wait for "start of" clock tick */
	ticks = jiffies;
	while (ticks == jiffies)
	/* nothing */ ;
	/* Go .. */
	ticks = jiffies;
	__delay(loops_per_jiffy);
	ticks = jiffies - ticks;
	if (ticks)
	break;
	}

	/* Do a binary approximation to get loops_per_jiffy set to equal one clock
	(up to lps_precision bits) */
	loops_per_jiffy >>= 1;
	loopbit = loops_per_jiffy;
	while (lps_precision-- && (loopbit >>= 1)) {
	loops_per_jiffy \|= loopbit;
	ticks = jiffies;
	while (ticks == jiffies);
	ticks = jiffies;
	__delay(loops_per_jiffy);
	if (jiffies != ticks) /* longer than 1 tick */
	loops_per_jiffy &= ~loopbit;
	}
	}
	#endif /* CONFIG_PM */