| /* |
| * i6300esb: Watchdog timer driver for Intel 6300ESB chipset |
| * |
| * (c) Copyright 2004 Google Inc. |
| * (c) Copyright 2005 David Härdeman <david@2gen.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| * based on i810-tco.c which is in turn based on softdog.c |
| * |
| * The timer is implemented in the following I/O controller hubs: |
| * (See the intel documentation on http://developer.intel.com.) |
| * 6300ESB chip : document number 300641-003 |
| * |
| * 2004YYZZ Ross Biro |
| * Initial version 0.01 |
| * 2004YYZZ Ross Biro |
| * Version 0.02 |
| * 20050210 David Härdeman <david@2gen.com> |
| * Ported driver to kernel 2.6 |
| */ |
| |
| /* |
| * Includes, defines, variables, module parameters, ... |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <linux/fs.h> |
| #include <linux/mm.h> |
| #include <linux/miscdevice.h> |
| #include <linux/watchdog.h> |
| #include <linux/reboot.h> |
| #include <linux/init.h> |
| #include <linux/pci.h> |
| #include <linux/ioport.h> |
| |
| #include <asm/uaccess.h> |
| #include <asm/io.h> |
| |
| /* Module and version information */ |
| #define ESB_VERSION "0.03" |
| #define ESB_MODULE_NAME "i6300ESB timer" |
| #define ESB_DRIVER_NAME ESB_MODULE_NAME ", v" ESB_VERSION |
| #define PFX ESB_MODULE_NAME ": " |
| |
| /* PCI configuration registers */ |
| #define ESB_CONFIG_REG 0x60 /* Config register */ |
| #define ESB_LOCK_REG 0x68 /* WDT lock register */ |
| |
| /* Memory mapped registers */ |
| #define ESB_TIMER1_REG BASEADDR + 0x00 /* Timer1 value after each reset */ |
| #define ESB_TIMER2_REG BASEADDR + 0x04 /* Timer2 value after each reset */ |
| #define ESB_GINTSR_REG BASEADDR + 0x08 /* General Interrupt Status Register */ |
| #define ESB_RELOAD_REG BASEADDR + 0x0c /* Reload register */ |
| |
| /* Lock register bits */ |
| #define ESB_WDT_FUNC ( 0x01 << 2 ) /* Watchdog functionality */ |
| #define ESB_WDT_ENABLE ( 0x01 << 1 ) /* Enable WDT */ |
| #define ESB_WDT_LOCK ( 0x01 << 0 ) /* Lock (nowayout) */ |
| |
| /* Config register bits */ |
| #define ESB_WDT_REBOOT ( 0x01 << 5 ) /* Enable reboot on timeout */ |
| #define ESB_WDT_FREQ ( 0x01 << 2 ) /* Decrement frequency */ |
| #define ESB_WDT_INTTYPE ( 0x11 << 0 ) /* Interrupt type on timer1 timeout */ |
| |
| /* Reload register bits */ |
| #define ESB_WDT_RELOAD ( 0x01 << 8 ) /* prevent timeout */ |
| |
| /* Magic constants */ |
| #define ESB_UNLOCK1 0x80 /* Step 1 to unlock reset registers */ |
| #define ESB_UNLOCK2 0x86 /* Step 2 to unlock reset registers */ |
| |
| /* internal variables */ |
| static void __iomem *BASEADDR; |
| static spinlock_t esb_lock; /* Guards the hardware */ |
| static unsigned long timer_alive; |
| static struct pci_dev *esb_pci; |
| static unsigned short triggered; /* The status of the watchdog upon boot */ |
| static char esb_expect_close; |
| |
| /* module parameters */ |
| #define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat (1<heartbeat<2*1023) */ |
| static int heartbeat = WATCHDOG_HEARTBEAT; /* in seconds */ |
| module_param(heartbeat, int, 0); |
| MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (1<heartbeat<2046, default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")"); |
| |
| static int nowayout = WATCHDOG_NOWAYOUT; |
| module_param(nowayout, int, 0); |
| MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); |
| |
| /* |
| * Some i6300ESB specific functions |
| */ |
| |
| /* |
| * Prepare for reloading the timer by unlocking the proper registers. |
| * This is performed by first writing 0x80 followed by 0x86 to the |
| * reload register. After this the appropriate registers can be written |
| * to once before they need to be unlocked again. |
| */ |
| static inline void esb_unlock_registers(void) { |
| writeb(ESB_UNLOCK1, ESB_RELOAD_REG); |
| writeb(ESB_UNLOCK2, ESB_RELOAD_REG); |
| } |
| |
| static void esb_timer_start(void) |
| { |
| u8 val; |
| |
| /* Enable or Enable + Lock? */ |
| val = 0x02 | (nowayout ? 0x01 : 0x00); |
| |
| pci_write_config_byte(esb_pci, ESB_LOCK_REG, val); |
| } |
| |
| static int esb_timer_stop(void) |
| { |
| u8 val; |
| |
| spin_lock(&esb_lock); |
| /* First, reset timers as suggested by the docs */ |
| esb_unlock_registers(); |
| writew(ESB_WDT_RELOAD, ESB_RELOAD_REG); |
| /* Then disable the WDT */ |
| pci_write_config_byte(esb_pci, ESB_LOCK_REG, 0x0); |
| pci_read_config_byte(esb_pci, ESB_LOCK_REG, &val); |
| spin_unlock(&esb_lock); |
| |
| /* Returns 0 if the timer was disabled, non-zero otherwise */ |
| return (val & 0x01); |
| } |
| |
| static void esb_timer_keepalive(void) |
| { |
| spin_lock(&esb_lock); |
| esb_unlock_registers(); |
| writew(ESB_WDT_RELOAD, ESB_RELOAD_REG); |
| /* FIXME: Do we need to flush anything here? */ |
| spin_unlock(&esb_lock); |
| } |
| |
| static int esb_timer_set_heartbeat(int time) |
| { |
| u32 val; |
| |
| if (time < 0x1 || time > (2 * 0x03ff)) |
| return -EINVAL; |
| |
| spin_lock(&esb_lock); |
| |
| /* We shift by 9, so if we are passed a value of 1 sec, |
| * val will be 1 << 9 = 512, then write that to two |
| * timers => 2 * 512 = 1024 (which is decremented at 1KHz) |
| */ |
| val = time << 9; |
| |
| /* Write timer 1 */ |
| esb_unlock_registers(); |
| writel(val, ESB_TIMER1_REG); |
| |
| /* Write timer 2 */ |
| esb_unlock_registers(); |
| writel(val, ESB_TIMER2_REG); |
| |
| /* Reload */ |
| esb_unlock_registers(); |
| writew(ESB_WDT_RELOAD, ESB_RELOAD_REG); |
| |
| /* FIXME: Do we need to flush everything out? */ |
| |
| /* Done */ |
| heartbeat = time; |
| spin_unlock(&esb_lock); |
| return 0; |
| } |
| |
| static int esb_timer_read (void) |
| { |
| u32 count; |
| |
| /* This isn't documented, and doesn't take into |
| * acount which stage is running, but it looks |
| * like a 20 bit count down, so we might as well report it. |
| */ |
| pci_read_config_dword(esb_pci, 0x64, &count); |
| return (int)count; |
| } |
| |
| /* |
| * /dev/watchdog handling |
| */ |
| |
| static int esb_open (struct inode *inode, struct file *file) |
| { |
| /* /dev/watchdog can only be opened once */ |
| if (test_and_set_bit(0, &timer_alive)) |
| return -EBUSY; |
| |
| /* Reload and activate timer */ |
| esb_timer_keepalive (); |
| esb_timer_start (); |
| |
| return nonseekable_open(inode, file); |
| } |
| |
| static int esb_release (struct inode *inode, struct file *file) |
| { |
| /* Shut off the timer. */ |
| if (esb_expect_close == 42) { |
| esb_timer_stop (); |
| } else { |
| printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n"); |
| esb_timer_keepalive (); |
| } |
| clear_bit(0, &timer_alive); |
| esb_expect_close = 0; |
| return 0; |
| } |
| |
| static ssize_t esb_write (struct file *file, const char __user *data, |
| size_t len, loff_t * ppos) |
| { |
| /* See if we got the magic character 'V' and reload the timer */ |
| if (len) { |
| if (!nowayout) { |
| size_t i; |
| |
| /* note: just in case someone wrote the magic character |
| * five months ago... */ |
| esb_expect_close = 0; |
| |
| /* scan to see whether or not we got the magic character */ |
| for (i = 0; i != len; i++) { |
| char c; |
| if(get_user(c, data+i)) |
| return -EFAULT; |
| if (c == 'V') |
| esb_expect_close = 42; |
| } |
| } |
| |
| /* someone wrote to us, we should reload the timer */ |
| esb_timer_keepalive (); |
| } |
| return len; |
| } |
| |
| static int esb_ioctl (struct inode *inode, struct file *file, |
| unsigned int cmd, unsigned long arg) |
| { |
| int new_options, retval = -EINVAL; |
| int new_heartbeat; |
| void __user *argp = (void __user *)arg; |
| int __user *p = argp; |
| static struct watchdog_info ident = { |
| .options = WDIOF_SETTIMEOUT | |
| WDIOF_KEEPALIVEPING | |
| WDIOF_MAGICCLOSE, |
| .firmware_version = 0, |
| .identity = ESB_MODULE_NAME, |
| }; |
| |
| switch (cmd) { |
| case WDIOC_GETSUPPORT: |
| return copy_to_user(argp, &ident, |
| sizeof (ident)) ? -EFAULT : 0; |
| |
| case WDIOC_GETSTATUS: |
| return put_user (esb_timer_read(), p); |
| |
| case WDIOC_GETBOOTSTATUS: |
| return put_user (triggered, p); |
| |
| case WDIOC_KEEPALIVE: |
| esb_timer_keepalive (); |
| return 0; |
| |
| case WDIOC_SETOPTIONS: |
| { |
| if (get_user (new_options, p)) |
| return -EFAULT; |
| |
| if (new_options & WDIOS_DISABLECARD) { |
| esb_timer_stop (); |
| retval = 0; |
| } |
| |
| if (new_options & WDIOS_ENABLECARD) { |
| esb_timer_keepalive (); |
| esb_timer_start (); |
| retval = 0; |
| } |
| |
| return retval; |
| } |
| |
| case WDIOC_SETTIMEOUT: |
| { |
| if (get_user(new_heartbeat, p)) |
| return -EFAULT; |
| |
| if (esb_timer_set_heartbeat(new_heartbeat)) |
| return -EINVAL; |
| |
| esb_timer_keepalive (); |
| /* Fall */ |
| } |
| |
| case WDIOC_GETTIMEOUT: |
| return put_user(heartbeat, p); |
| |
| default: |
| return -ENOIOCTLCMD; |
| } |
| } |
| |
| /* |
| * Notify system |
| */ |
| |
| static int esb_notify_sys (struct notifier_block *this, unsigned long code, void *unused) |
| { |
| if (code==SYS_DOWN || code==SYS_HALT) { |
| /* Turn the WDT off */ |
| esb_timer_stop (); |
| } |
| |
| return NOTIFY_DONE; |
| } |
| |
| /* |
| * Kernel Interfaces |
| */ |
| |
| static struct file_operations esb_fops = { |
| .owner = THIS_MODULE, |
| .llseek = no_llseek, |
| .write = esb_write, |
| .ioctl = esb_ioctl, |
| .open = esb_open, |
| .release = esb_release, |
| }; |
| |
| static struct miscdevice esb_miscdev = { |
| .minor = WATCHDOG_MINOR, |
| .name = "watchdog", |
| .fops = &esb_fops, |
| }; |
| |
| static struct notifier_block esb_notifier = { |
| .notifier_call = esb_notify_sys, |
| }; |
| |
| /* |
| * Data for PCI driver interface |
| * |
| * This data only exists for exporting the supported |
| * PCI ids via MODULE_DEVICE_TABLE. We do not actually |
| * register a pci_driver, because someone else might one day |
| * want to register another driver on the same PCI id. |
| */ |
| static struct pci_device_id esb_pci_tbl[] = { |
| { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_9), }, |
| { 0, }, /* End of list */ |
| }; |
| MODULE_DEVICE_TABLE (pci, esb_pci_tbl); |
| |
| /* |
| * Init & exit routines |
| */ |
| |
| static unsigned char __init esb_getdevice (void) |
| { |
| u8 val1; |
| unsigned short val2; |
| |
| struct pci_dev *dev = NULL; |
| /* |
| * Find the PCI device |
| */ |
| |
| for_each_pci_dev(dev) { |
| if (pci_match_id(esb_pci_tbl, dev)) { |
| esb_pci = dev; |
| break; |
| } |
| } |
| |
| if (esb_pci) { |
| if (pci_enable_device(esb_pci)) { |
| printk (KERN_ERR PFX "failed to enable device\n"); |
| goto err_devput; |
| } |
| |
| if (pci_request_region(esb_pci, 0, ESB_MODULE_NAME)) { |
| printk (KERN_ERR PFX "failed to request region\n"); |
| goto err_disable; |
| } |
| |
| BASEADDR = ioremap(pci_resource_start(esb_pci, 0), |
| pci_resource_len(esb_pci, 0)); |
| if (BASEADDR == NULL) { |
| /* Something's wrong here, BASEADDR has to be set */ |
| printk (KERN_ERR PFX "failed to get BASEADDR\n"); |
| goto err_release; |
| } |
| |
| /* |
| * The watchdog has two timers, it can be setup so that the |
| * expiry of timer1 results in an interrupt and the expiry of |
| * timer2 results in a reboot. We set it to not generate |
| * any interrupts as there is not much we can do with it |
| * right now. |
| * |
| * We also enable reboots and set the timer frequency to |
| * the PCI clock divided by 2^15 (approx 1KHz). |
| */ |
| pci_write_config_word(esb_pci, ESB_CONFIG_REG, 0x0003); |
| |
| /* Check that the WDT isn't already locked */ |
| pci_read_config_byte(esb_pci, ESB_LOCK_REG, &val1); |
| if (val1 & ESB_WDT_LOCK) |
| printk (KERN_WARNING PFX "nowayout already set\n"); |
| |
| /* Set the timer to watchdog mode and disable it for now */ |
| pci_write_config_byte(esb_pci, ESB_LOCK_REG, 0x00); |
| |
| /* Check if the watchdog was previously triggered */ |
| esb_unlock_registers(); |
| val2 = readw(ESB_RELOAD_REG); |
| triggered = (val2 & (0x01 << 9) >> 9); |
| |
| /* Reset trigger flag and timers */ |
| esb_unlock_registers(); |
| writew((0x11 << 8), ESB_RELOAD_REG); |
| |
| /* Done */ |
| return 1; |
| |
| err_release: |
| pci_release_region(esb_pci, 0); |
| err_disable: |
| pci_disable_device(esb_pci); |
| err_devput: |
| pci_dev_put(esb_pci); |
| } |
| return 0; |
| } |
| |
| static int __init watchdog_init (void) |
| { |
| int ret; |
| |
| spin_lock_init(&esb_lock); |
| |
| /* Check whether or not the hardware watchdog is there */ |
| if (!esb_getdevice () || esb_pci == NULL) |
| return -ENODEV; |
| |
| /* Check that the heartbeat value is within it's range ; if not reset to the default */ |
| if (esb_timer_set_heartbeat (heartbeat)) { |
| esb_timer_set_heartbeat (WATCHDOG_HEARTBEAT); |
| printk(KERN_INFO PFX "heartbeat value must be 1<heartbeat<2046, using %d\n", |
| heartbeat); |
| } |
| |
| ret = register_reboot_notifier(&esb_notifier); |
| if (ret != 0) { |
| printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", |
| ret); |
| goto err_unmap; |
| } |
| |
| ret = misc_register(&esb_miscdev); |
| if (ret != 0) { |
| printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", |
| WATCHDOG_MINOR, ret); |
| goto err_notifier; |
| } |
| |
| esb_timer_stop (); |
| |
| printk (KERN_INFO PFX "initialized (0x%p). heartbeat=%d sec (nowayout=%d)\n", |
| BASEADDR, heartbeat, nowayout); |
| |
| return 0; |
| |
| err_notifier: |
| unregister_reboot_notifier(&esb_notifier); |
| err_unmap: |
| iounmap(BASEADDR); |
| /* err_release: */ |
| pci_release_region(esb_pci, 0); |
| /* err_disable: */ |
| pci_disable_device(esb_pci); |
| /* err_devput: */ |
| pci_dev_put(esb_pci); |
| return ret; |
| } |
| |
| static void __exit watchdog_cleanup (void) |
| { |
| /* Stop the timer before we leave */ |
| if (!nowayout) |
| esb_timer_stop (); |
| |
| /* Deregister */ |
| misc_deregister(&esb_miscdev); |
| unregister_reboot_notifier(&esb_notifier); |
| iounmap(BASEADDR); |
| pci_release_region(esb_pci, 0); |
| pci_disable_device(esb_pci); |
| pci_dev_put(esb_pci); |
| } |
| |
| module_init(watchdog_init); |
| module_exit(watchdog_cleanup); |
| |
| MODULE_AUTHOR("Ross Biro and David Härdeman"); |
| MODULE_DESCRIPTION("Watchdog driver for Intel 6300ESB chipsets"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); |