i40evf: Remove PF specific register definitions from the VF
There were quite a few issues when the wrong defines were getting used
in the VF driver. This patch fixes the code where PF driver registers
were getting used for VF driver, and also removes the registers that are
not being used from the VF register file.
Change-ID: If116a9730112950d006eb8ec763998fc914cc839
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Acked-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_adminq.c b/drivers/net/ethernet/intel/i40evf/i40e_adminq.c
index c1d25f8..f08450b 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_adminq.c
+++ b/drivers/net/ethernet/intel/i40evf/i40e_adminq.c
@@ -60,17 +60,6 @@
hw->aq.arq.len = I40E_VF_ARQLEN1;
hw->aq.arq.bal = I40E_VF_ARQBAL1;
hw->aq.arq.bah = I40E_VF_ARQBAH1;
- } else {
- hw->aq.asq.tail = I40E_PF_ATQT;
- hw->aq.asq.head = I40E_PF_ATQH;
- hw->aq.asq.len = I40E_PF_ATQLEN;
- hw->aq.asq.bal = I40E_PF_ATQBAL;
- hw->aq.asq.bah = I40E_PF_ATQBAH;
- hw->aq.arq.tail = I40E_PF_ARQT;
- hw->aq.arq.head = I40E_PF_ARQH;
- hw->aq.arq.len = I40E_PF_ARQLEN;
- hw->aq.arq.bal = I40E_PF_ARQBAL;
- hw->aq.arq.bah = I40E_PF_ARQBAH;
}
}
@@ -308,7 +297,7 @@
/* set starting point */
wr32(hw, hw->aq.asq.len, (hw->aq.num_asq_entries |
- I40E_PF_ATQLEN_ATQENABLE_MASK));
+ I40E_VF_ATQLEN1_ATQENABLE_MASK));
wr32(hw, hw->aq.asq.bal, lower_32_bits(hw->aq.asq.desc_buf.pa));
wr32(hw, hw->aq.asq.bah, upper_32_bits(hw->aq.asq.desc_buf.pa));
@@ -337,7 +326,7 @@
/* set starting point */
wr32(hw, hw->aq.arq.len, (hw->aq.num_arq_entries |
- I40E_PF_ARQLEN_ARQENABLE_MASK));
+ I40E_VF_ARQLEN1_ARQENABLE_MASK));
wr32(hw, hw->aq.arq.bal, lower_32_bits(hw->aq.arq.desc_buf.pa));
wr32(hw, hw->aq.arq.bah, upper_32_bits(hw->aq.arq.desc_buf.pa));
@@ -899,7 +888,7 @@
mutex_lock(&hw->aq.arq_mutex);
/* set next_to_use to head */
- ntu = (rd32(hw, hw->aq.arq.head) & I40E_PF_ARQH_ARQH_MASK);
+ ntu = (rd32(hw, hw->aq.arq.head) & I40E_VF_ARQH1_ARQH_MASK);
if (ntu == ntc) {
/* nothing to do - shouldn't need to update ring's values */
ret_code = I40E_ERR_ADMIN_QUEUE_NO_WORK;