Input: add matrix keypad driver for Cirrus EP93xx
This is a keyboard driver for the Cirrus Logic EP93xx keypad matrix
peripheral. This driver is based on the pxa27x_keypad driver.
[dtor@mail.ru: Plug in input_dev->keycode so keymap can be changed
from userspace.]
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 3556168..76407df 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -332,4 +332,14 @@
To compile this driver as a module, choose M here: the
module will be called sh_keysc.
++
+config KEYBOARD_EP93XX
+ tristate "EP93xx Matrix Keypad support"
+ depends on ARCH_EP93XX
+ help
+ Say Y here to enable the matrix keypad on the Cirrus EP93XX.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ep93xx_keypad.
+
endif
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 36351e1..13ba9c9 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -28,3 +28,4 @@
obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o
obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o
obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o
+obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o
diff --git a/drivers/input/keyboard/ep93xx_keypad.c b/drivers/input/keyboard/ep93xx_keypad.c
new file mode 100644
index 0000000..181d30e
--- /dev/null
+++ b/drivers/input/keyboard/ep93xx_keypad.c
@@ -0,0 +1,470 @@
+/*
+ * Driver for the Cirrus EP93xx matrix keypad controller.
+ *
+ * Copyright (c) 2008 H Hartley Sweeten <hsweeten@visionengravers.com>
+ *
+ * Based on the pxa27x matrix keypad controller by Rodolfo Giometti.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * NOTE:
+ *
+ * The 3-key reset is triggered by pressing the 3 keys in
+ * Row 0, Columns 2, 4, and 7 at the same time. This action can
+ * be disabled by setting the EP93XX_KEYPAD_DISABLE_3_KEY flag.
+ *
+ * Normal operation for the matrix does not autorepeat the key press.
+ * This action can be enabled by setting the EP93XX_KEYPAD_AUTOREPEAT
+ * flag.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/clk.h>
+
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <mach/ep93xx_keypad.h>
+
+/*
+ * Keypad Interface Register offsets
+ */
+#define KEY_INIT 0x00 /* Key Scan Initialization register */
+#define KEY_DIAG 0x04 /* Key Scan Diagnostic register */
+#define KEY_REG 0x08 /* Key Value Capture register */
+
+/* Key Scan Initialization Register bit defines */
+#define KEY_INIT_DBNC_MASK (0x00ff0000)
+#define KEY_INIT_DBNC_SHIFT (16)
+#define KEY_INIT_DIS3KY (1<<15)
+#define KEY_INIT_DIAG (1<<14)
+#define KEY_INIT_BACK (1<<13)
+#define KEY_INIT_T2 (1<<12)
+#define KEY_INIT_PRSCL_MASK (0x000003ff)
+#define KEY_INIT_PRSCL_SHIFT (0)
+
+/* Key Scan Diagnostic Register bit defines */
+#define KEY_DIAG_MASK (0x0000003f)
+#define KEY_DIAG_SHIFT (0)
+
+/* Key Value Capture Register bit defines */
+#define KEY_REG_K (1<<15)
+#define KEY_REG_INT (1<<14)
+#define KEY_REG_2KEYS (1<<13)
+#define KEY_REG_1KEY (1<<12)
+#define KEY_REG_KEY2_MASK (0x00000fc0)
+#define KEY_REG_KEY2_SHIFT (6)
+#define KEY_REG_KEY1_MASK (0x0000003f)
+#define KEY_REG_KEY1_SHIFT (0)
+
+#define keypad_readl(off) __raw_readl(keypad->mmio_base + (off))
+#define keypad_writel(v, off) __raw_writel((v), keypad->mmio_base + (off))
+
+#define MAX_MATRIX_KEY_NUM (MAX_MATRIX_KEY_ROWS * MAX_MATRIX_KEY_COLS)
+
+struct ep93xx_keypad {
+ struct ep93xx_keypad_platform_data *pdata;
+
+ struct clk *clk;
+ struct input_dev *input_dev;
+ void __iomem *mmio_base;
+
+ int irq;
+ int enabled;
+
+ int key1;
+ int key2;
+
+ unsigned int matrix_keycodes[MAX_MATRIX_KEY_NUM];
+};
+
+static void ep93xx_keypad_build_keycode(struct ep93xx_keypad *keypad)
+{
+ struct ep93xx_keypad_platform_data *pdata = keypad->pdata;
+ struct input_dev *input_dev = keypad->input_dev;
+ int i;
+
+ for (i = 0; i < pdata->matrix_key_map_size; i++) {
+ unsigned int key = pdata->matrix_key_map[i];
+ int row = (key >> 28) & 0xf;
+ int col = (key >> 24) & 0xf;
+ int code = key & 0xffffff;
+
+ keypad->matrix_keycodes[(row << 3) + col] = code;
+ __set_bit(code, input_dev->keybit);
+ }
+}
+
+static irqreturn_t ep93xx_keypad_irq_handler(int irq, void *dev_id)
+{
+ struct ep93xx_keypad *keypad = dev_id;
+ struct input_dev *input_dev = keypad->input_dev;
+ unsigned int status = keypad_readl(KEY_REG);
+ int keycode, key1, key2;
+
+ keycode = (status & KEY_REG_KEY1_MASK) >> KEY_REG_KEY1_SHIFT;
+ key1 = keypad->matrix_keycodes[keycode];
+
+ keycode = (status & KEY_REG_KEY2_MASK) >> KEY_REG_KEY2_SHIFT;
+ key2 = keypad->matrix_keycodes[keycode];
+
+ if (status & KEY_REG_2KEYS) {
+ if (keypad->key1 && key1 != keypad->key1 && key2 != keypad->key1)
+ input_report_key(input_dev, keypad->key1, 0);
+
+ if (keypad->key2 && key1 != keypad->key2 && key2 != keypad->key2)
+ input_report_key(input_dev, keypad->key2, 0);
+
+ input_report_key(input_dev, key1, 1);
+ input_report_key(input_dev, key2, 1);
+
+ keypad->key1 = key1;
+ keypad->key2 = key2;
+
+ } else if (status & KEY_REG_1KEY) {
+ if (keypad->key1 && key1 != keypad->key1)
+ input_report_key(input_dev, keypad->key1, 0);
+
+ if (keypad->key2 && key1 != keypad->key2)
+ input_report_key(input_dev, keypad->key2, 0);
+
+ input_report_key(input_dev, key1, 1);
+
+ keypad->key1 = key1;
+ keypad->key2 = 0;
+
+ } else {
+ input_report_key(input_dev, keypad->key1, 0);
+ input_report_key(input_dev, keypad->key2, 0);
+
+ keypad->key1 = keypad->key2 = 0;
+ }
+ input_sync(input_dev);
+
+ return IRQ_HANDLED;
+}
+
+static void ep93xx_keypad_config(struct ep93xx_keypad *keypad)
+{
+ struct ep93xx_keypad_platform_data *pdata = keypad->pdata;
+ unsigned int val = 0;
+
+ clk_set_rate(keypad->clk, pdata->flags & EP93XX_KEYPAD_KDIV);
+
+ if (pdata->flags & EP93XX_KEYPAD_DISABLE_3_KEY)
+ val |= KEY_INIT_DIS3KY;
+ if (pdata->flags & EP93XX_KEYPAD_DIAG_MODE)
+ val |= KEY_INIT_DIAG;
+ if (pdata->flags & EP93XX_KEYPAD_BACK_DRIVE)
+ val |= KEY_INIT_BACK;
+ if (pdata->flags & EP93XX_KEYPAD_TEST_MODE)
+ val |= KEY_INIT_T2;
+
+ val |= ((pdata->debounce << KEY_INIT_DBNC_SHIFT) & KEY_INIT_DBNC_MASK);
+
+ val |= ((pdata->prescale << KEY_INIT_PRSCL_SHIFT) & KEY_INIT_PRSCL_MASK);
+
+ keypad_writel(val, KEY_INIT);
+}
+
+static int ep93xx_keypad_open(struct input_dev *pdev)
+{
+ struct ep93xx_keypad *keypad = input_get_drvdata(pdev);
+
+ if (!keypad->enabled) {
+ ep93xx_keypad_config(keypad);
+ clk_enable(keypad->clk);
+ keypad->enabled = 1;
+ }
+
+ return 0;
+}
+
+static void ep93xx_keypad_close(struct input_dev *pdev)
+{
+ struct ep93xx_keypad *keypad = input_get_drvdata(pdev);
+
+ if (keypad->enabled) {
+ clk_disable(keypad->clk);
+ keypad->enabled = 0;
+ }
+}
+
+
+#ifdef CONFIG_PM
+/*
+ * NOTE: I don't know if this is correct, or will work on the ep93xx.
+ *
+ * None of the existing ep93xx drivers have power management support.
+ * But, this is basically what the pxa27x_keypad driver does.
+ */
+static int ep93xx_keypad_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ struct ep93xx_keypad *keypad = platform_get_drvdata(pdev);
+ struct input_dev *input_dev = keypad->input_dev;
+
+ mutex_lock(&input_dev->mutex);
+
+ if (keypad->enabled) {
+ clk_disable(keypad->clk);
+ keypad->enabled = 0;
+ }
+
+ mutex_unlock(&input_dev->mutex);
+
+ if (device_may_wakeup(&pdev->dev))
+ enable_irq_wake(keypad->irq);
+
+ return 0;
+}
+
+static int ep93xx_keypad_resume(struct platform_device *pdev)
+{
+ struct ep93xx_keypad *keypad = platform_get_drvdata(pdev);
+ struct input_dev *input_dev = keypad->input_dev;
+
+ if (device_may_wakeup(&pdev->dev))
+ disable_irq_wake(keypad->irq);
+
+ mutex_lock(&input_dev->mutex);
+
+ if (input_dev->users) {
+ if (!keypad->enabled) {
+ ep93xx_keypad_config(keypad);
+ clk_enable(keypad->clk);
+ keypad->enabled = 1;
+ }
+ }
+
+ mutex_unlock(&input_dev->mutex);
+
+ return 0;
+}
+#else /* !CONFIG_PM */
+#define ep93xx_keypad_suspend NULL
+#define ep93xx_keypad_resume NULL
+#endif /* !CONFIG_PM */
+
+static int __devinit ep93xx_keypad_probe(struct platform_device *pdev)
+{
+ struct ep93xx_keypad *keypad;
+ struct ep93xx_keypad_platform_data *pdata = pdev->dev.platform_data;
+ struct input_dev *input_dev;
+ struct resource *res;
+ int irq, err, i, gpio;
+
+ if (!pdata ||
+ !pdata->matrix_key_rows ||
+ pdata->matrix_key_rows > MAX_MATRIX_KEY_ROWS ||
+ !pdata->matrix_key_cols ||
+ pdata->matrix_key_cols > MAX_MATRIX_KEY_COLS) {
+ dev_err(&pdev->dev, "invalid or missing platform data\n");
+ return -EINVAL;
+ }
+
+ keypad = kzalloc(sizeof(struct ep93xx_keypad), GFP_KERNEL);
+ if (!keypad) {
+ dev_err(&pdev->dev, "failed to allocate driver data\n");
+ return -ENOMEM;
+ }
+
+ keypad->pdata = pdata;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "failed to get keypad irq\n");
+ err = -ENXIO;
+ goto failed_free;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "failed to get I/O memory\n");
+ err = -ENXIO;
+ goto failed_free;
+ }
+
+ res = request_mem_region(res->start, resource_size(res), pdev->name);
+ if (!res) {
+ dev_err(&pdev->dev, "failed to request I/O memory\n");
+ err = -EBUSY;
+ goto failed_free;
+ }
+
+ keypad->mmio_base = ioremap(res->start, resource_size(res));
+ if (keypad->mmio_base == NULL) {
+ dev_err(&pdev->dev, "failed to remap I/O memory\n");
+ err = -ENXIO;
+ goto failed_free_mem;
+ }
+
+ /* Request the needed GPIO's */
+ gpio = EP93XX_GPIO_LINE_ROW0;
+ for (i = 0; i < keypad->pdata->matrix_key_rows; i++, gpio++) {
+ err = gpio_request(gpio, pdev->name);
+ if (err) {
+ dev_err(&pdev->dev, "failed to request gpio-%d\n",
+ gpio);
+ goto failed_free_rows;
+ }
+ }
+
+ gpio = EP93XX_GPIO_LINE_COL0;
+ for (i = 0; i < keypad->pdata->matrix_key_cols; i++, gpio++) {
+ err = gpio_request(gpio, pdev->name);
+ if (err) {
+ dev_err(&pdev->dev, "failed to request gpio-%d\n",
+ gpio);
+ goto failed_free_cols;
+ }
+ }
+
+ keypad->clk = clk_get(&pdev->dev, "key_clk");
+ if (IS_ERR(keypad->clk)) {
+ dev_err(&pdev->dev, "failed to get keypad clock\n");
+ err = PTR_ERR(keypad->clk);
+ goto failed_free_io;
+ }
+
+ /* Create and register the input driver */
+ input_dev = input_allocate_device();
+ if (!input_dev) {
+ dev_err(&pdev->dev, "failed to allocate input device\n");
+ err = -ENOMEM;
+ goto failed_put_clk;
+ }
+
+ keypad->input_dev = input_dev;
+
+ input_dev->name = pdev->name;
+ input_dev->id.bustype = BUS_HOST;
+ input_dev->open = ep93xx_keypad_open;
+ input_dev->close = ep93xx_keypad_close;
+ input_dev->dev.parent = &pdev->dev;
+ input_dev->keycode = keypad->matrix_keycodes;
+ input_dev->keycodesize = sizeof(keypad->matrix_keycodes[0]);
+ input_dev->keycodemax = ARRAY_SIZE(keypad->matrix_keycodes);
+
+ input_set_drvdata(input_dev, keypad);
+
+ input_dev->evbit[0] = BIT_MASK(EV_KEY);
+ if (keypad->pdata->flags & EP93XX_KEYPAD_AUTOREPEAT)
+ input_dev->evbit[0] |= BIT_MASK(EV_REP);
+
+ ep93xx_keypad_build_keycode(keypad);
+ platform_set_drvdata(pdev, keypad);
+
+ err = request_irq(irq, ep93xx_keypad_irq_handler, IRQF_DISABLED,
+ pdev->name, keypad);
+ if (err) {
+ dev_err(&pdev->dev, "failed to request IRQ\n");
+ goto failed_free_dev;
+ }
+
+ keypad->irq = irq;
+
+ /* Register the input device */
+ err = input_register_device(input_dev);
+ if (err) {
+ dev_err(&pdev->dev, "failed to register input device\n");
+ goto failed_free_irq;
+ }
+
+ device_init_wakeup(&pdev->dev, 1);
+
+ return 0;
+
+failed_free_irq:
+ free_irq(irq, pdev);
+ platform_set_drvdata(pdev, NULL);
+failed_free_dev:
+ input_free_device(input_dev);
+failed_put_clk:
+ clk_put(keypad->clk);
+failed_free_io:
+ i = keypad->pdata->matrix_key_cols - 1;
+ gpio = EP93XX_GPIO_LINE_COL0 + i;
+failed_free_cols:
+ for ( ; i >= 0; i--, gpio--)
+ gpio_free(gpio);
+ i = keypad->pdata->matrix_key_rows - 1;
+ gpio = EP93XX_GPIO_LINE_ROW0 + i;
+failed_free_rows:
+ for ( ; i >= 0; i--, gpio--)
+ gpio_free(gpio);
+ iounmap(keypad->mmio_base);
+failed_free_mem:
+ release_mem_region(res->start, resource_size(res));
+failed_free:
+ kfree(keypad);
+ return err;
+}
+
+static int __devexit ep93xx_keypad_remove(struct platform_device *pdev)
+{
+ struct ep93xx_keypad *keypad = platform_get_drvdata(pdev);
+ struct resource *res;
+ int i, gpio;
+
+ free_irq(keypad->irq, pdev);
+
+ platform_set_drvdata(pdev, NULL);
+
+ if (keypad->enabled)
+ clk_disable(keypad->clk);
+ clk_put(keypad->clk);
+
+ input_unregister_device(keypad->input_dev);
+
+ i = keypad->pdata->matrix_key_cols - 1;
+ gpio = EP93XX_GPIO_LINE_COL0 + i;
+ for ( ; i >= 0; i--, gpio--)
+ gpio_free(gpio);
+
+ i = keypad->pdata->matrix_key_rows - 1;
+ gpio = EP93XX_GPIO_LINE_ROW0 + i;
+ for ( ; i >= 0; i--, gpio--)
+ gpio_free(gpio);
+
+ iounmap(keypad->mmio_base);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(res->start, resource_size(res));
+
+ kfree(keypad);
+
+ return 0;
+}
+
+static struct platform_driver ep93xx_keypad_driver = {
+ .driver = {
+ .name = "ep93xx-keypad",
+ .owner = THIS_MODULE,
+ },
+ .probe = ep93xx_keypad_probe,
+ .remove = __devexit_p(ep93xx_keypad_remove),
+ .suspend = ep93xx_keypad_suspend,
+ .resume = ep93xx_keypad_resume,
+};
+
+static int __init ep93xx_keypad_init(void)
+{
+ return platform_driver_register(&ep93xx_keypad_driver);
+}
+
+static void __exit ep93xx_keypad_exit(void)
+{
+ platform_driver_unregister(&ep93xx_keypad_driver);
+}
+
+module_init(ep93xx_keypad_init);
+module_exit(ep93xx_keypad_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("H Hartley Sweeten <hsweeten@visionengravers.com>");
+MODULE_DESCRIPTION("EP93xx Matrix Keypad Controller");
+MODULE_ALIAS("platform:ep93xx-keypad");