[MTD NAND] Indent all of drivers/mtd/nand/*.c.
It was just too painful to deal with.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 5b55599..338fda8 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -77,10 +77,10 @@
*/
static struct nand_oobinfo nand_hw_eccoob = {
- .useecc = MTD_NANDECC_AUTOPLACE,
- .eccbytes = 3,
- .eccpos = {0, 1, 2 },
- .oobfree = { {8, 8} }
+ .useecc = MTD_NANDECC_AUTOPLACE,
+ .eccbytes = 3,
+ .eccpos = {0, 1, 2},
+ .oobfree = {{8, 8}}
};
/* controller and mtd information */
@@ -149,8 +149,7 @@
pr_debug("result %d from %ld, %d\n", result, clk, wanted);
if (result > max) {
- printk("%d ns is too big for current clock rate %ld\n",
- wanted, clk);
+ printk("%d ns is too big for current clock rate %ld\n", wanted, clk);
return -1;
}
@@ -164,8 +163,7 @@
/* controller setup */
-static int s3c2410_nand_inithw(struct s3c2410_nand_info *info,
- struct platform_device *pdev)
+static int s3c2410_nand_inithw(struct s3c2410_nand_info *info, struct platform_device *pdev)
{
struct s3c2410_platform_nand *plat = to_nand_plat(pdev);
unsigned long clkrate = clk_get_rate(info->clk);
@@ -177,7 +175,7 @@
clkrate /= 1000; /* turn clock into kHz for ease of use */
if (plat != NULL) {
- tacls = s3c2410_nand_calc_rate(plat->tacls, clkrate, 4);
+ tacls = s3c2410_nand_calc_rate(plat->tacls, clkrate, 4);
twrph0 = s3c2410_nand_calc_rate(plat->twrph0, clkrate, 8);
twrph1 = s3c2410_nand_calc_rate(plat->twrph1, clkrate, 8);
} else {
@@ -193,19 +191,17 @@
}
printk(KERN_INFO PFX "Tacls=%d, %dns Twrph0=%d %dns, Twrph1=%d %dns\n",
- tacls, to_ns(tacls, clkrate),
- twrph0, to_ns(twrph0, clkrate),
- twrph1, to_ns(twrph1, clkrate));
+ tacls, to_ns(tacls, clkrate), twrph0, to_ns(twrph0, clkrate), twrph1, to_ns(twrph1, clkrate));
if (!info->is_s3c2440) {
- cfg = S3C2410_NFCONF_EN;
- cfg |= S3C2410_NFCONF_TACLS(tacls-1);
- cfg |= S3C2410_NFCONF_TWRPH0(twrph0-1);
- cfg |= S3C2410_NFCONF_TWRPH1(twrph1-1);
+ cfg = S3C2410_NFCONF_EN;
+ cfg |= S3C2410_NFCONF_TACLS(tacls - 1);
+ cfg |= S3C2410_NFCONF_TWRPH0(twrph0 - 1);
+ cfg |= S3C2410_NFCONF_TWRPH1(twrph1 - 1);
} else {
- cfg = S3C2440_NFCONF_TACLS(tacls-1);
- cfg |= S3C2440_NFCONF_TWRPH0(twrph0-1);
- cfg |= S3C2440_NFCONF_TWRPH1(twrph1-1);
+ cfg = S3C2440_NFCONF_TACLS(tacls - 1);
+ cfg |= S3C2440_NFCONF_TWRPH0(twrph0 - 1);
+ cfg |= S3C2440_NFCONF_TWRPH1(twrph1 - 1);
}
pr_debug(PFX "NF_CONF is 0x%lx\n", cfg);
@@ -229,7 +225,7 @@
info = nmtd->info;
bit = (info->is_s3c2440) ? S3C2440_NFCONT_nFCE : S3C2410_NFCONF_nFCE;
- reg = info->regs+((info->is_s3c2440) ? S3C2440_NFCONT:S3C2410_NFCONF);
+ reg = info->regs + ((info->is_s3c2440) ? S3C2440_NFCONT : S3C2410_NFCONF);
cur = readl(reg);
@@ -243,7 +239,7 @@
if (info->platform != NULL) {
if (info->platform->select_chip != NULL)
- (info->platform->select_chip)(nmtd->set, chip);
+ (info->platform->select_chip) (nmtd->set, chip);
}
cur &= ~bit;
@@ -330,22 +326,16 @@
return readb(info->regs + S3C2410_NFSTAT) & S3C2410_NFSTAT_BUSY;
}
-
/* ECC handling functions */
-static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat,
- u_char *read_ecc, u_char *calc_ecc)
+static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc)
{
- pr_debug("s3c2410_nand_correct_data(%p,%p,%p,%p)\n",
- mtd, dat, read_ecc, calc_ecc);
+ pr_debug("s3c2410_nand_correct_data(%p,%p,%p,%p)\n", mtd, dat, read_ecc, calc_ecc);
pr_debug("eccs: read %02x,%02x,%02x vs calc %02x,%02x,%02x\n",
- read_ecc[0], read_ecc[1], read_ecc[2],
- calc_ecc[0], calc_ecc[1], calc_ecc[2]);
+ read_ecc[0], read_ecc[1], read_ecc[2], calc_ecc[0], calc_ecc[1], calc_ecc[2]);
- if (read_ecc[0] == calc_ecc[0] &&
- read_ecc[1] == calc_ecc[1] &&
- read_ecc[2] == calc_ecc[2])
+ if (read_ecc[0] == calc_ecc[0] && read_ecc[1] == calc_ecc[1] && read_ecc[2] == calc_ecc[2])
return 0;
/* we curently have no method for correcting the error */
@@ -378,8 +368,7 @@
writel(ctrl | S3C2440_NFCONT_INITECC, info->regs + S3C2440_NFCONT);
}
-static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd,
- const u_char *dat, u_char *ecc_code)
+static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
{
struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
@@ -387,15 +376,12 @@
ecc_code[1] = readb(info->regs + S3C2410_NFECC + 1);
ecc_code[2] = readb(info->regs + S3C2410_NFECC + 2);
- pr_debug("calculate_ecc: returning ecc %02x,%02x,%02x\n",
- ecc_code[0], ecc_code[1], ecc_code[2]);
+ pr_debug("calculate_ecc: returning ecc %02x,%02x,%02x\n", ecc_code[0], ecc_code[1], ecc_code[2]);
return 0;
}
-
-static int s3c2440_nand_calculate_ecc(struct mtd_info *mtd,
- const u_char *dat, u_char *ecc_code)
+static int s3c2440_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
{
struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
unsigned long ecc = readl(info->regs + S3C2440_NFMECC0);
@@ -404,13 +390,11 @@
ecc_code[1] = ecc >> 8;
ecc_code[2] = ecc >> 16;
- pr_debug("calculate_ecc: returning ecc %02x,%02x,%02x\n",
- ecc_code[0], ecc_code[1], ecc_code[2]);
+ pr_debug("calculate_ecc: returning ecc %02x,%02x,%02x\n", ecc_code[0], ecc_code[1], ecc_code[2]);
return 0;
}
-
/* over-ride the standard functions for a little more speed. We can
* use read/write block to move the data buffers to/from the controller
*/
@@ -421,8 +405,7 @@
readsb(this->IO_ADDR_R, buf, len);
}
-static void s3c2410_nand_write_buf(struct mtd_info *mtd,
- const u_char *buf, int len)
+static void s3c2410_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
struct nand_chip *this = mtd->priv;
writesb(this->IO_ADDR_W, buf, len);
@@ -488,9 +471,7 @@
return add_mtd_device(&mtd->mtd);
if (set->nr_partitions > 0 && set->partitions != NULL) {
- return add_mtd_partitions(&mtd->mtd,
- set->partitions,
- set->nr_partitions);
+ return add_mtd_partitions(&mtd->mtd, set->partitions, set->nr_partitions);
}
return add_mtd_device(&mtd->mtd);
@@ -654,13 +635,11 @@
nmtd = info->mtds;
for (setno = 0; setno < nr_sets; setno++, nmtd++) {
- pr_debug("initialising set %d (%p, info %p)\n",
- setno, nmtd, info);
+ pr_debug("initialising set %d (%p, info %p)\n", setno, nmtd, info);
s3c2410_nand_init_chip(info, nmtd, sets);
- nmtd->scan_res = nand_scan(&nmtd->mtd,
- (sets) ? sets->nr_chips : 1);
+ nmtd->scan_res = nand_scan(&nmtd->mtd, (sets) ? sets->nr_chips : 1);
if (nmtd->scan_res == 0) {
s3c2410_nand_add_partition(info, nmtd, sets);