V4L/DVB (6646): xc2028: rework firmware (re)loading process
Define a list of valid "firmware types" for each combination of BASE,
DTV and SCODEs. By masking the appropriate firmware bits off we can
just use one "type" for the firmware searching and also flag when we
are looking for a BASE, DTV or SCODE type firmware. This makes it
much easier to track if we need to change device modes or flash an
individual firmware part.
Add a structure to remember what firmware properties we have. This
contains the currently loaded/wanted base firmware (type), video std
(id), video std requested (std_req), scode file and number in use.
Incorporate said structure into the tuner private data.
When checking whether the current firmware needs to be reloaded, first
figure out exactly what "type" of firmware we want (base, std and
scode), and then proceed to load the appropriate matching base,
std-specific and scode records iff there are any changes required.
This removes guesswork from the process because we no longer need to
individually code a check for every tuning parameter's interactions.
Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/drivers/media/video/tuner-xc2028.c b/drivers/media/video/tuner-xc2028.c
index a5efd5f..8140d8a 100644
--- a/drivers/media/video/tuner-xc2028.c
+++ b/drivers/media/video/tuner-xc2028.c
@@ -54,6 +54,14 @@
unsigned int size;
};
+struct firmware_properties {
+ unsigned int type;
+ v4l2_std_id id;
+ v4l2_std_id std_req;
+ unsigned int scode_table;
+ int scode_nr;
+};
+
struct xc2028_data {
struct list_head xc2028_list;
struct tuner_i2c_props i2c_props;
@@ -69,14 +77,7 @@
struct xc2028_ctrl ctrl;
- v4l2_std_id firm_type; /* video stds supported
- by current firmware */
- fe_bandwidth_t bandwidth; /* Firmware bandwidth:
- 6M, 7M or 8M */
- int need_load_generic; /* The generic firmware
- were loaded? */
- enum tuner_mode mode;
- struct i2c_client *i2c_client;
+ struct firmware_properties cur_fw;
struct mutex lock;
};
@@ -234,7 +235,8 @@
priv->firm = NULL;
priv->firm_size = 0;
- priv->need_load_generic = 1;
+
+ memset(&priv->cur_fw, 0, sizeof(priv->cur_fw));
}
static int load_all_firmwares(struct dvb_frontend *fe)
@@ -393,6 +395,13 @@
if (((type & ~SCODE) == 0) && (*id == 0))
*id = V4L2_STD_PAL;
+ if (type & BASE)
+ type &= BASE_TYPES;
+ else if (type & SCODE)
+ type &= SCODE_TYPES;
+ else if (type & DTV_TYPES)
+ type = type & DTV_TYPES;
+
/* Seek for exact match */
for (i = 0; i < priv->firm_size; i++) {
if ((type == priv->firm[i].type) && (*id == priv->firm[i].id))
@@ -598,11 +607,10 @@
v4l2_std_id std, fe_bandwidth_t bandwidth)
{
struct xc2028_data *priv = fe->tuner_priv;
- int rc;
+ int rc = 0;
+ unsigned int type = 0;
+ struct firmware_properties new_fw;
u16 version, hwmodel;
- v4l2_std_id std0 = 0;
- unsigned int type0 = 0, type = 0;
- int change_digital_bandwidth;
tuner_dbg("%s called\n", __FUNCTION__);
@@ -617,61 +625,19 @@
return rc;
}
- tuner_dbg("I am in mode %u and I should switch to mode %i\n",
- priv->mode, new_mode);
+ if (priv->ctrl.type == XC2028_FIRM_MTS)
+ type |= MTS;
+ if (bandwidth == BANDWIDTH_7_MHZ || bandwidth == BANDWIDTH_8_MHZ)
+ type |= F8MHZ;
- /* first of all, determine whether we have switched the mode */
- if (new_mode != priv->mode) {
- priv->mode = new_mode;
- priv->need_load_generic = 1;
- }
+ /* FIXME: How to load FM and FM|INPUT1 firmwares? */
- change_digital_bandwidth = (priv->mode == T_DIGITAL_TV
- && bandwidth != priv->bandwidth) ? 1 : 0;
- tuner_dbg("old bandwidth %u, new bandwidth %u\n", priv->bandwidth,
- bandwidth);
-
- if (priv->need_load_generic) {
- /* Reset is needed before loading firmware */
- rc = priv->tuner_callback(priv->video_dev,
- XC2028_TUNER_RESET, 0);
- if (rc < 0)
- return rc;
-
- type0 = BASE;
-
- if (priv->ctrl.type == XC2028_FIRM_MTS)
- type0 |= MTS;
-
- if (bandwidth == BANDWIDTH_7_MHZ ||
- bandwidth == BANDWIDTH_8_MHZ)
- type0 |= F8MHZ;
-
- /* FIXME: How to load FM and FM|INPUT1 firmwares? */
-
- rc = load_firmware(fe, type0, &std0);
- if (rc < 0) {
- tuner_err("Error %d while loading generic firmware\n",
- rc);
- return rc;
- }
-
- priv->need_load_generic = 0;
- priv->firm_type = 0;
- if (priv->mode == T_DIGITAL_TV)
- change_digital_bandwidth = 1;
- }
-
- tuner_dbg("I should change bandwidth %u\n", change_digital_bandwidth);
-
- if (change_digital_bandwidth) {
+ if (new_mode == T_DIGITAL_TV) {
if (priv->ctrl.d2633)
type |= D2633;
else
type |= D2620;
- /* FIXME: When should select a DTV78 firmware?
- */
switch (bandwidth) {
case BANDWIDTH_8_MHZ:
type |= DTV8;
@@ -683,49 +649,96 @@
/* FIXME: Should allow select also ATSC */
type |= DTV6 | QAM;
break;
-
default:
tuner_err("error: bandwidth not supported.\n");
};
- priv->bandwidth = bandwidth;
}
- if (!change_digital_bandwidth && priv->mode == T_DIGITAL_TV)
- return 0;
+ new_fw.type = type;
+ new_fw.id = std;
+ new_fw.std_req = std;
+ new_fw.scode_table = SCODE | priv->ctrl.scode_table;
+ new_fw.scode_nr = 0;
+
+ tuner_dbg("checking firmware, user requested type=");
+ if (debug) {
+ dump_firm_type(new_fw.type);
+ printk("(%x), id %016llx, scode_tbl ", new_fw.type,
+ (unsigned long long)new_fw.std_req);
+ dump_firm_type(priv->ctrl.scode_table);
+ printk("(%x), scode_nr %d\n", priv->ctrl.scode_table,
+ new_fw.scode_nr);
+ }
+
+ /* No need to reload base firmware if it matches */
+ if (((BASE | new_fw.type) & BASE_TYPES) ==
+ (priv->cur_fw.type & BASE_TYPES)) {
+ tuner_dbg("BASE firmware not changed.\n");
+ goto skip_base;
+ }
+
+ /* Updating BASE - forget about all currently loaded firmware */
+ memset(&priv->cur_fw, 0, sizeof(priv->cur_fw));
+
+ /* Reset is needed before loading firmware */
+ rc = priv->tuner_callback(priv->video_dev,
+ XC2028_TUNER_RESET, 0);
+ if (rc < 0)
+ goto fail;
+
+ rc = load_firmware(fe, BASE | new_fw.type, &new_fw.id);
+ if (rc < 0) {
+ tuner_err("Error %d while loading base firmware\n",
+ rc);
+ goto fail;
+ }
/* Load INIT1, if needed */
tuner_dbg("Load init1 firmware, if exists\n");
- type0 = BASE | INIT1;
- if (priv->ctrl.type == XC2028_FIRM_MTS)
- type0 |= MTS;
- /* FIXME: Should handle errors - if INIT1 found */
- rc = load_firmware(fe, type0, &std0);
-
- /* FIXME: Should add support for FM radio
- */
-
- if (priv->ctrl.type == XC2028_FIRM_MTS)
- type |= MTS;
-
- if (priv->firm_type & std) {
- tuner_dbg("Std-specific firmware already loaded.\n");
- return 0;
+ rc = load_firmware(fe, BASE | INIT1 | new_fw.type, &new_fw.id);
+ if (rc < 0 && rc != -ENOENT) {
+ tuner_err("Error %d while loading init1 firmware\n",
+ rc);
+ goto fail;
}
- /* Add audio hack to std mask */
- std |= parse_audio_std_option();
+skip_base:
+ /*
+ * No need to reload standard specific firmware if base firmware
+ * was not reloaded and requested video standards have not changed.
+ */
+ if (priv->cur_fw.type == (BASE | new_fw.type) &&
+ priv->cur_fw.std_req == std) {
+ tuner_dbg("Std-specific firmware already loaded.\n");
+ goto skip_std_specific;
+ }
- rc = load_firmware(fe, type, &std);
+ /* Reloading std-specific firmware forces a SCODE update */
+ priv->cur_fw.scode_table = 0;
+
+ /* Add audio hack to std mask */
+ if (new_mode == T_ANALOG_TV)
+ new_fw.id |= parse_audio_std_option();
+
+ rc = load_firmware(fe, new_fw.type, &new_fw.id);
if (rc < 0)
- return rc;
+ goto fail;
+
+skip_std_specific:
+ if (priv->cur_fw.scode_table == new_fw.scode_table &&
+ priv->cur_fw.scode_nr == new_fw.scode_nr) {
+ tuner_dbg("SCODE firmware already loaded.\n");
+ goto check_device;
+ }
/* Load SCODE firmware, if exists */
- tuner_dbg("Trying to load scode 0\n");
- type |= SCODE;
+ tuner_dbg("Trying to load scode %d\n", new_fw.scode_nr);
- rc = load_scode(fe, type, &std, 0);
+ rc = load_scode(fe, new_fw.type | new_fw.scode_table,
+ &new_fw.id, new_fw.scode_nr);
+check_device:
xc2028_get_reg(priv, 0x0004, &version);
xc2028_get_reg(priv, 0x0008, &hwmodel);
@@ -734,9 +747,23 @@
hwmodel, (version & 0xf000) >> 12, (version & 0xf00) >> 8,
(version & 0xf0) >> 4, version & 0xf);
- priv->firm_type = std;
+ memcpy(&priv->cur_fw, &new_fw, sizeof(priv->cur_fw));
+
+ /*
+ * By setting BASE in cur_fw.type only after successfully loading all
+ * firmwares, we can:
+ * 1. Identify that BASE firmware with type=0 has been loaded;
+ * 2. Tell whether BASE firmware was just changed the next time through.
+ */
+ priv->cur_fw.type |= BASE;
return 0;
+
+fail:
+ memset(&priv->cur_fw, 0, sizeof(priv->cur_fw));
+ if (rc == -ENOENT)
+ rc = -EINVAL;
+ return rc;
}
static int xc2028_signal(struct dvb_frontend *fe, u16 *strength)
@@ -785,16 +812,10 @@
mutex_lock(&priv->lock);
/* HACK: It seems that specific firmware need to be reloaded
- when freq is changed */
+ when watching analog TV and freq is changed */
+ if (new_mode != T_DIGITAL_TV)
+ priv->cur_fw.type = 0;
- priv->firm_type = 0;
-
- /* Reset GPIO 1 */
- rc = priv->tuner_callback(priv->video_dev, XC2028_TUNER_RESET, 0);
- if (rc < 0)
- goto ret;
-
- msleep(10);
tuner_dbg("should set frequency %d kHz\n", freq / 1000);
if (check_firmware(fe, new_mode, std, bandwidth) < 0)
@@ -802,7 +823,7 @@
if (new_mode == T_DIGITAL_TV) {
offset = 2750000;
- if (priv->bandwidth == BANDWIDTH_7_MHZ)
+ if (priv->cur_fw.type & DTV7)
offset -= 500000;
}
@@ -994,9 +1015,6 @@
return NULL;
}
- priv->bandwidth = BANDWIDTH_6_MHZ;
- priv->need_load_generic = 1;
- priv->mode = T_UNINITIALIZED;
priv->i2c_props.addr = cfg->i2c_addr;
priv->i2c_props.adap = cfg->i2c_adap;
priv->video_dev = video_dev;