[media] mxl5007t: use DVBv5 parameters on set_params()
Instead of using DVBv3 parameters, rely on DVBv5 parameters to
set the tuner.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/common/tuners/mxl5007t.c b/drivers/media/common/tuners/mxl5007t.c
index 67bccde..e22fcb1 100644
--- a/drivers/media/common/tuners/mxl5007t.c
+++ b/drivers/media/common/tuners/mxl5007t.c
@@ -619,44 +619,42 @@
static int mxl5007t_set_params(struct dvb_frontend *fe,
struct dvb_frontend_parameters *params)
{
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+ u32 delsys = c->delivery_system;
struct mxl5007t_state *state = fe->tuner_priv;
enum mxl5007t_bw_mhz bw;
enum mxl5007t_mode mode;
int ret;
- u32 freq = params->frequency;
+ u32 freq = c->frequency;
+ u32 band = BANDWIDTH_6_MHZ;
- if (fe->ops.info.type == FE_ATSC) {
- switch (params->u.vsb.modulation) {
- case VSB_8:
- case VSB_16:
- mode = MxL_MODE_ATSC;
- break;
- case QAM_64:
- case QAM_256:
- mode = MxL_MODE_CABLE;
- break;
- default:
- mxl_err("modulation not set!");
- return -EINVAL;
- }
+ switch (delsys) {
+ case SYS_ATSC:
+ mode = MxL_MODE_ATSC;
bw = MxL_BW_6MHz;
- } else if (fe->ops.info.type == FE_OFDM) {
- switch (params->u.ofdm.bandwidth) {
- case BANDWIDTH_6_MHZ:
+ break;
+ case SYS_DVBC_ANNEX_B:
+ mode = MxL_MODE_CABLE;
+ bw = MxL_BW_6MHz;
+ break;
+ case SYS_DVBT:
+ case SYS_DVBT2:
+ mode = MxL_MODE_DVBT;
+ switch (c->bandwidth_hz) {
+ case 6000000:
bw = MxL_BW_6MHz;
break;
- case BANDWIDTH_7_MHZ:
+ case 7000000:
bw = MxL_BW_7MHz;
- break;
- case BANDWIDTH_8_MHZ:
+ band = BANDWIDTH_7_MHZ;
+ case 8000000:
bw = MxL_BW_8MHz;
- break;
+ band = BANDWIDTH_8_MHZ;
default:
- mxl_err("bandwidth not set!");
return -EINVAL;
}
- mode = MxL_MODE_DVBT;
- } else {
+ break;
+ default:
mxl_err("modulation type not supported!");
return -EINVAL;
}
@@ -675,8 +673,7 @@
goto fail;
state->frequency = freq;
- state->bandwidth = (fe->ops.info.type == FE_OFDM) ?
- params->u.ofdm.bandwidth : 0;
+ state->bandwidth = band;
fail:
mutex_unlock(&state->lock);