hwmon: (lm63) Convert to use devm_hwmon_device_register_with_groups
Simplify code, reduce code size, attach hwmon attributes to hwmon device.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c
index 7dc4873..c529164 100644
--- a/drivers/hwmon/lm63.c
+++ b/drivers/hwmon/lm63.c
@@ -155,7 +155,7 @@
*/
struct lm63_data {
- struct device *hwmon_dev;
+ struct i2c_client *client;
struct mutex update_lock;
const struct attribute_group *groups[5];
char valid; /* zero until following fields are valid */
@@ -219,9 +219,9 @@
* Update the lookup table register cache.
* client->update_lock must be held when calling this function.
*/
-static void lm63_update_lut(struct i2c_client *client)
+static void lm63_update_lut(struct lm63_data *data)
{
- struct lm63_data *data = i2c_get_clientdata(client);
+ struct i2c_client *client = data->client;
int i;
if (time_after(jiffies, data->lut_last_updated + 5 * HZ) ||
@@ -242,8 +242,8 @@
static struct lm63_data *lm63_update_device(struct device *dev)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct lm63_data *data = i2c_get_clientdata(client);
+ struct lm63_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
unsigned long next_update;
mutex_lock(&data->update_lock);
@@ -311,7 +311,7 @@
data->valid = 1;
}
- lm63_update_lut(client);
+ lm63_update_lut(data);
mutex_unlock(&data->update_lock);
@@ -322,18 +322,17 @@
* Trip points in the lookup table should be in ascending order for both
* temperatures and PWM output values.
*/
-static int lm63_lut_looks_bad(struct i2c_client *client)
+static int lm63_lut_looks_bad(struct device *dev, struct lm63_data *data)
{
- struct lm63_data *data = i2c_get_clientdata(client);
int i;
mutex_lock(&data->update_lock);
- lm63_update_lut(client);
+ lm63_update_lut(data);
for (i = 1; i < data->lut_size; i++) {
if (data->pwm1[1 + i - 1] > data->pwm1[1 + i]
|| data->temp8[3 + i - 1] > data->temp8[3 + i]) {
- dev_warn(&client->dev,
+ dev_warn(dev,
"Lookup table doesn't look sane (check entries %d and %d)\n",
i, i + 1);
break;
@@ -359,8 +358,8 @@
static ssize_t set_fan(struct device *dev, struct device_attribute *dummy,
const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct lm63_data *data = i2c_get_clientdata(client);
+ struct lm63_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
unsigned long val;
int err;
@@ -400,8 +399,8 @@
const char *buf, size_t count)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
- struct i2c_client *client = to_i2c_client(dev);
- struct lm63_data *data = i2c_get_clientdata(client);
+ struct lm63_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
int nr = attr->index;
unsigned long val;
int err;
@@ -436,8 +435,8 @@
struct device_attribute *dummy,
const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct lm63_data *data = i2c_get_clientdata(client);
+ struct lm63_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
unsigned long val;
int err;
@@ -451,7 +450,7 @@
* Only let the user switch to automatic mode if the lookup table
* looks sane.
*/
- if (val == 2 && lm63_lut_looks_bad(client))
+ if (val == 2 && lm63_lut_looks_bad(dev, data))
return -EPERM;
mutex_lock(&data->update_lock);
@@ -462,7 +461,7 @@
else
data->config_fan &= ~0x20;
i2c_smbus_write_byte_data(client, LM63_REG_CONFIG_FAN,
- data->config_fan);
+ data->config_fan);
mutex_unlock(&data->update_lock);
return count;
}
@@ -506,8 +505,8 @@
const char *buf, size_t count)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
- struct i2c_client *client = to_i2c_client(dev);
- struct lm63_data *data = i2c_get_clientdata(client);
+ struct lm63_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
int nr = attr->index;
long val;
int err;
@@ -580,8 +579,8 @@
};
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
- struct i2c_client *client = to_i2c_client(dev);
- struct lm63_data *data = i2c_get_clientdata(client);
+ struct lm63_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
long val;
int err;
int nr = attr->index;
@@ -636,8 +635,8 @@
struct device_attribute *dummy,
const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct lm63_data *data = i2c_get_clientdata(client);
+ struct lm63_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
long val;
int err;
long hyst;
@@ -658,11 +657,11 @@
* Set conversion rate.
* client->update_lock must be held when calling this function.
*/
-static void lm63_set_convrate(struct i2c_client *client, struct lm63_data *data,
- unsigned int interval)
+static void lm63_set_convrate(struct lm63_data *data, unsigned int interval)
{
- int i;
+ struct i2c_client *client = data->client;
unsigned int update_interval;
+ int i;
/* Shift calculations to avoid rounding errors */
interval <<= 6;
@@ -690,8 +689,7 @@
struct device_attribute *attr,
const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct lm63_data *data = i2c_get_clientdata(client);
+ struct lm63_data *data = dev_get_drvdata(dev);
unsigned long val;
int err;
@@ -700,7 +698,7 @@
return err;
mutex_lock(&data->update_lock);
- lm63_set_convrate(client, data, clamp_val(val, 0, 100000));
+ lm63_set_convrate(data, clamp_val(val, 0, 100000));
mutex_unlock(&data->update_lock);
return count;
@@ -709,8 +707,7 @@
static ssize_t show_type(struct device *dev, struct device_attribute *attr,
char *buf)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct lm63_data *data = i2c_get_clientdata(client);
+ struct lm63_data *data = dev_get_drvdata(dev);
return sprintf(buf, data->trutherm ? "1\n" : "2\n");
}
@@ -718,8 +715,8 @@
static ssize_t set_type(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct lm63_data *data = i2c_get_clientdata(client);
+ struct lm63_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
unsigned long val;
int ret;
u8 reg;
@@ -956,8 +953,7 @@
struct attribute *attr, int index)
{
struct device *dev = container_of(kobj, struct device, kobj);
- struct i2c_client *client = to_i2c_client(dev);
- struct lm63_data *data = i2c_get_clientdata(client);
+ struct lm63_data *data = dev_get_drvdata(dev);
if (attr == &sensor_dev_attr_temp2_crit.dev_attr.attr
&& (data->kind == lm64 ||
@@ -1036,9 +1032,9 @@
* Ideally we shouldn't have to initialize anything, since the BIOS
* should have taken care of everything
*/
-static void lm63_init_client(struct i2c_client *client)
+static void lm63_init_client(struct lm63_data *data)
{
- struct lm63_data *data = i2c_get_clientdata(client);
+ struct i2c_client *client = data->client;
struct device *dev = &client->dev;
u8 convrate;
@@ -1116,15 +1112,15 @@
const struct i2c_device_id *id)
{
struct device *dev = &client->dev;
+ struct device *hwmon_dev;
struct lm63_data *data;
int groups = 0;
- int err;
data = devm_kzalloc(dev, sizeof(struct lm63_data), GFP_KERNEL);
if (!data)
return -ENOMEM;
- i2c_set_clientdata(client, data);
+ data->client = client;
data->valid = 0;
mutex_init(&data->update_lock);
@@ -1134,7 +1130,7 @@
data->temp2_offset = 16000;
/* Initialize chip */
- lm63_init_client(client);
+ lm63_init_client(data);
/* Register sysfs hooks */
data->groups[groups++] = &lm63_group;
@@ -1146,30 +1142,9 @@
data->groups[groups++] = &lm63_group_extra_lut;
}
- err = sysfs_create_groups(&dev->kobj, data->groups);
- if (err)
- return err;
-
- data->hwmon_dev = hwmon_device_register(dev);
- if (IS_ERR(data->hwmon_dev)) {
- err = PTR_ERR(data->hwmon_dev);
- goto exit_remove_files;
- }
-
- return 0;
-
-exit_remove_files:
- sysfs_remove_groups(&dev->kobj, data->groups);
- return err;
-}
-
-static int lm63_remove(struct i2c_client *client)
-{
- struct lm63_data *data = i2c_get_clientdata(client);
-
- hwmon_device_unregister(data->hwmon_dev);
- sysfs_remove_groups(&client->dev.kobj, data->groups);
- return 0;
+ hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
+ data, data->groups);
+ return PTR_ERR_OR_ZERO(hwmon_dev);
}
/*
@@ -1190,7 +1165,6 @@
.name = "lm63",
},
.probe = lm63_probe,
- .remove = lm63_remove,
.id_table = lm63_id,
.detect = lm63_detect,
.address_list = normal_i2c,