ARM: mxs: convert tx28 board to device tree
FEC support is missing because we need to find a proper way to rewrite
tx28_add_fec0 for device tree boot.
Cc: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 8595977..e906ec1 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -186,6 +186,19 @@
fsl,pull-up = <0>;
};
+ duart_4pins_a: duart-4pins@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */
+ 0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */
+ 0x3002 /* MX28_PAD_AUART0_RX__DUART_CTS */
+ 0x3012 /* MX28_PAD_AUART0_TX__DUART_RTS */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
gpmi_pins_a: gpmi-nand@0 {
reg = <0>;
fsl,pinmux-ids = <
@@ -243,6 +256,19 @@
fsl,pull-up = <0>;
};
+ auart1_pins_a: auart1@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */
+ 0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */
+ 0x3060 /* MX28_PAD_AUART1_CTS__AUART1_CTS */
+ 0x3070 /* MX28_PAD_AUART1_RTS__AUART1_RTS */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
auart1_2pins_a: auart1-2pins@0 {
reg = <0>;
fsl,pinmux-ids = <
@@ -407,6 +433,16 @@
fsl,pull-up = <1>;
};
+ pwm0_pins_a: pwm0@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x3100 /* MX28_PAD_PWM0__PWM_0 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
pwm2_pins_a: pwm2@0 {
reg = <0>;
fsl,pinmux-ids = <