| /* |
| * Copyright (c) 2018, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| /dts-v1/; |
| |
| #include "apq8053-lite.dtsi" |
| #include "msm8953-pinctrl.dtsi" |
| #include "pmi8950.dtsi" |
| #include "msm8953-pmi8950.dtsi" |
| #include "msm8953-mdss-panels.dtsi" |
| |
| / { |
| model = "Qualcomm Technologies, Inc. APQ8053 Lite SoM"; |
| }; |
| |
| &soc { |
| vreg_5p0: vreg_5p0 { |
| compatible = "regulator-fixed"; |
| regulator-name = "vreg_5p0"; |
| status = "ok"; |
| enable-active-high; |
| }; |
| |
| eldo_cam0_vreg: eldo_cam0_vreg { |
| compatible = "regulator-fixed"; |
| regulator-name = "eldo_cam0_vreg"; |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <1100000>; |
| status = "ok"; |
| enable-active-high; |
| vin-supply = <&pm8953_l5>; |
| }; |
| |
| eldo_cam1_vreg: eldo_cam1_vreg { |
| compatible = "regulator-fixed"; |
| regulator-name = "eldo_cam1_vreg"; |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <1100000>; |
| status = "ok"; |
| enable-active-high; |
| vin-supply = <&pm8953_l5>; |
| }; |
| |
| eldo_cam2_vreg: eldo_cam2_vreg { |
| compatible = "regulator-fixed"; |
| regulator-name = "eldo_cam2_vreg"; |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <1100000>; |
| status = "ok"; |
| enable-active-high; |
| vin-supply = <&pm8953_l5>; |
| }; |
| |
| eldo_cam1_vcm_vreg: eldo_cam1_vcm_vreg { |
| compatible = "regulator-fixed"; |
| regulator-name = "eldo_cam1_vcm_vreg"; |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <2800000>; |
| status = "ok"; |
| enable-active-high; |
| }; |
| |
| cnss_sdio: qcom,cnss_sdio { |
| compatible = "qcom,cnss_sdio"; |
| subsys-name = "AR6320"; |
| |
| /** |
| * There is no vdd-wlan on board and this is not for DSRC. |
| * IO and XTAL share the same vreg. |
| */ |
| vdd-wlan-io-supply = <&pm8953_l6>; |
| qcom,wlan-ramdump-dynamic = <0x200000>; |
| qcom,msm-bus,name = "msm-cnss"; |
| qcom,msm-bus,num-cases = <4>; |
| qcom,msm-bus,num-paths = <1>; |
| qcom,msm-bus,vectors-KBps = |
| <79 512 0 0>, /* No vote */ |
| <79 512 6250 200000>, /* 50 Mbps */ |
| <79 512 25000 200000>, /* 200 Mbps */ |
| <79 512 2048000 4096000>; /* MAX */ |
| }; |
| |
| bluetooth: bt_qca9379 { |
| compatible = "qca,qca6174"; |
| qca,bt-reset-gpio = <&tlmm 76 0>; /* BT_EN */ |
| }; |
| |
| cdc_dmic_gpios: cdc_dmic_pinctrl { |
| compatible = "qcom,msm-cdc-pinctrl"; |
| pinctrl-names = "aud_active", "aud_sleep"; |
| pinctrl-0 = <&cdc_dmic0_clk_act &cdc_dmic0_data_act>; |
| pinctrl-1 = <&cdc_dmic0_clk_sus &cdc_dmic0_data_sus>; |
| }; |
| |
| cdc_quat_mi2s_gpios: msm_cdc_pinctrl_quat { |
| compatible = "qcom,msm-cdc-pinctrl"; |
| pinctrl-names = "aud_active", "aud_sleep"; |
| pinctrl-0 = <&sec_tlmm_lines_act &ext_amp_ctrl_active>; |
| pinctrl-1 = <&sec_tlmm_lines_sus &ext_amp_ctrl_sleep>; |
| }; |
| |
| gpio_keys { |
| compatible = "gpio-keys"; |
| input-name = "gpio-keys"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&gpio_key_active>; |
| vol_up { |
| label = "volume_up"; |
| gpios = <&tlmm 85 0x1>; |
| linux,input-type = <1>; |
| linux,code = <115>; |
| debounce-interval = <15>; |
| linux,can-disable; |
| gpio-key,wakeup; |
| }; |
| }; |
| |
| }; |
| |
| &cdc_pdm_comp_lines_act { |
| mux { |
| pins = "gpio67"; |
| function = "cdc_pdm0"; |
| }; |
| |
| config { |
| pins = "gpio67"; |
| drive-strength = <8>; |
| }; |
| }; |
| |
| &cdc_pdm_comp_lines_sus { |
| mux { |
| pins = "gpio67"; |
| function = "cdc_pdm0"; |
| }; |
| |
| config { |
| pins = "gpio67"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| }; |
| |
| &firmware { |
| android { |
| vbmeta { |
| compatible = "android,vbmeta"; |
| |
| parts = "vbmeta,boot,system,vendor,bluetooth,modem,oem"; |
| }; |
| fstab { |
| /delete-node/ system; |
| vendor { |
| fsmgr_flags = "wait,slotselect,avb"; |
| }; |
| }; |
| }; |
| }; |
| |
| &rpm_bus { |
| rpm-regulator-ldoa4 { |
| compatible = "qcom,rpm-smd-regulator-resource"; |
| qcom,resource-name = "ldoa"; |
| qcom,resource-id = <4>; |
| qcom,regulator-type = <0>; |
| qcom,hpm-min-load = <10000>; |
| status = "okay"; |
| |
| pm8953_l4: regulator-l4 { |
| compatible = "qcom,rpm-smd-regulator"; |
| regulator-name = "pm8953_l4"; |
| qcom,set = <3>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,init-voltage = <1800000>; |
| status = "okay"; |
| }; |
| }; |
| }; |
| |
| &int_codec { |
| status = "ok"; |
| qcom,model = "msm8953-openq624-snd-card"; |
| |
| /delete-property/ qcom,cdc-us-euro-gpios; |
| qcom,msm-hs-micbias-type = "internal"; |
| |
| qcom,audio-routing = |
| "RX_BIAS", "MCLK", |
| "SPK_RX_BIAS", "MCLK", |
| "INT_LDO_H", "MCLK", |
| "MIC BIAS Internal1", "Handset Mic", |
| "MIC BIAS Internal2", "Headset Mic", |
| "MIC BIAS Internal1", "Secondary Mic", |
| "AMIC1", "MIC BIAS Internal1", |
| "AMIC2", "MIC BIAS Internal2", |
| "AMIC3", "MIC BIAS Internal1", |
| "DMIC1", "MIC BIAS Internal1", |
| "MIC BIAS Internal1", "Digital Mic1", |
| "DMIC2", "MIC BIAS Internal1", |
| "MIC BIAS Internal1", "Digital Mic2"; |
| |
| qcom,quat-mi2s-gpios = <&cdc_quat_mi2s_gpios>; |
| qcom,cdc-dmic-gpios = <&cdc_dmic_gpios>; |
| |
| /delete-property/ asoc-wsa-codec-names; |
| /delete-property/ asoc-wsa-codec-prefixes; |
| /delete-property/ msm-vdd-wsa-switch-supply; |
| /delete-property/ qcom,msm-vdd-wsa-switch-voltage; |
| /delete-property/ qcom,msm-vdd-wsa-switch-current; |
| }; |
| |
| &soc { |
| /delete-node/ hbtp; |
| }; |
| |
| &mdss_mdp { |
| qcom,mdss-pref-prim-intf = "dsi"; |
| }; |
| |
| &mdss_dsi0 { |
| qcom,dsi-pref-prim-pan = <&dsi_boyi_hx83100a_800p_video>; |
| }; |
| |
| &blsp1_uart0 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart_console_active>; |
| }; |
| |
| |
| &blsp2_uart0 { |
| status = "okay"; |
| }; |
| |
| &sdhc_1 { |
| /* device core power supply */ |
| vdd-supply = <&pm8953_l8>; |
| qcom,vdd-voltage-level = <2900000 2900000>; |
| qcom,vdd-current-level = <200 570000>; |
| |
| /* device communication power supply */ |
| vdd-io-supply = <&pm8953_l5>; |
| qcom,vdd-io-always-on; |
| qcom,vdd-io-lpm-sup; |
| qcom,vdd-io-voltage-level = <1800000 1800000>; |
| qcom,vdd-io-current-level = <200 325000>; |
| |
| pinctrl-names = "active", "sleep"; |
| pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>; |
| pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>; |
| |
| qcom,clk-rates = <400000 20000000 25000000 50000000 100000000 192000000 |
| 384000000>; |
| qcom,nonremovable; |
| qcom,bus-speed-mode = "HS400_1p8v", "HS200_1p8v", "DDR_1p8v"; |
| |
| status = "ok"; |
| }; |
| |
| &tlmm { |
| sdc2_wlan_gpio_on: sdc2_wlan_gpio_on { |
| mux { |
| pins = "gpio75"; |
| function = "gpio"; |
| }; |
| |
| config { |
| pins = "gpio75"; |
| drive-strength = <10>; |
| bias-pull-up; |
| output-high; |
| }; |
| }; |
| sdc2_wlan_gpio_off: sdc2_wlan_gpio_off { |
| mux { |
| pins = "gpio75"; |
| function = "gpio"; |
| }; |
| |
| config { |
| pins = "gpio75"; |
| drive-strength = <2>; |
| bias-disable; |
| output-low; |
| }; |
| }; |
| }; |
| |
| &sdhc_2 { |
| /* device communication power supply */ |
| vdd-io-supply = <&pm8953_l12>; |
| qcom,vdd-io-always-on; |
| qcom,vdd-io-voltage-level = <1800000 1800000>; |
| qcom,vdd-io-current-level = <200 22000>; |
| |
| qcom,core_3_0v_support; |
| qcom,nonremovable; |
| |
| pinctrl-names = "active", "sleep"; |
| pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on |
| &sdc2_wlan_gpio_on>; |
| pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off |
| &sdc2_wlan_gpio_off>; |
| |
| qcom,clk-rates = <400000 20000000 25000000 50000000 100000000>; |
| qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104"; |
| |
| status = "ok"; |
| }; |
| |
| &spmi_bus { |
| qcom,pmi8950@2 { |
| qcom,leds@a100 { |
| compatible = "qcom,leds-qpnp"; |
| reg = <0xa100 0x100>; |
| label = "mpp"; |
| |
| qcom,led_mpp_2 { |
| label = "mpp"; |
| linux,name = "green"; |
| linux,default-trigger = "none"; |
| qcom,default-state = "off"; |
| qcom,max-current = <40>; |
| qcom,current-setting = <5>; |
| qcom,id = <6>; |
| qcom,mode = "manual"; |
| qcom,source-sel = <1>; |
| qcom,mode-ctrl = <0x60>; |
| }; |
| }; |
| |
| qcom,leds@a300 { |
| compatible = "qcom,leds-qpnp"; |
| reg = <0xa300 0x100>; |
| label = "mpp"; |
| |
| qcom,led_mpp_4 { |
| label = "mpp"; |
| linux,name = "blue"; |
| linux,default-trigger = "none"; |
| qcom,default-state = "off"; |
| qcom,max-current = <40>; |
| qcom,current-setting = <5>; |
| qcom,id = <6>; |
| qcom,mode = "manual"; |
| qcom,source-sel = <1>; |
| qcom,mode-ctrl = <0x60>; |
| }; |
| }; |
| }; |
| }; |
| |
| &pm8953_typec { |
| ss-mux-supply = <&pm8953_l13>; |
| qcom,ssmux-gpio = <&tlmm 139 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&typec_ssmux_config>; |
| }; |
| |
| /{ |
| mtp_batterydata: qcom,battery-data { |
| qcom,batt-id-range-pct = <15>; |
| #include "batterydata-itech-3000mah.dtsi" |
| #include "batterydata-ascent-3450mAh.dtsi" |
| }; |
| }; |
| |
| &pmi_haptic{ |
| status = "disabled"; |
| qcom,lra-auto-res-mode="qwd"; |
| qcom,lra-high-z="opt1"; |
| qcom,lra-res-cal-period = <0>; |
| qcom,wave-play-rate-us = <4165>; |
| }; |
| |
| &flash_led { |
| status = "disabled"; |
| }; |
| |
| &pm8953_pwm { |
| status = "ok"; |
| }; |
| |
| &pm8953_vadc { |
| /delete-node/ chan@13; |
| }; |
| |
| &pmi8950_gpios { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pmi_gpio1_default>; |
| pmi_gpio1_default: pmi8950_gpio1 { |
| pins = "gpio1"; |
| function = "normal"; |
| input-enable; |
| power-source = <0>; |
| status = "okay"; |
| }; |
| }; |
| |
| &pmi8950_mpps { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&ext_fet_wled_pwr_en_default>; |
| ext_fet_wled_pwr_en_default: pmi8950_mpp3 { |
| pins = "mpp3"; /* MPP_3 */ |
| function = "digital"; /* Digital */ |
| output-high; /* Output */ |
| drive-strength = <2>; /* 1.8 mA */ |
| power-source = <1>; |
| bias-disable = <0>; /* no pull */ |
| status = "okay"; |
| }; |
| }; |
| |
| &pm8953_gpios { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pm_gpio1_div_clk2_default>; |
| pm_gpio1_div_clk2_default: pm8953_gpio1 { |
| pins = "gpio1"; |
| function = "normal"; |
| output-high; |
| power-source = <1>; |
| status = "okay"; |
| }; |
| }; |
| |
| &pm8953_mpps { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pm_mpp4_wled_pwm_ctrl_default>; |
| pm_mpp4_wled_pwm_ctrl_default: pm8953_mpp4 { |
| pins = "mpp4"; /* WLED_PWM_CTRL */ |
| function = "digital"; /* Digital */ |
| output-high; /* Output */ |
| drive-strength = <2>; /* 1.8 mA */ |
| power-source = <0>; /* VPH_PWR */ |
| qcom,dtest = <1>; /* DTEST1 */ |
| bias-disable = <0>; /* no pull */ |
| status = "okay"; |
| }; |
| }; |