Documentation/ABI/stable/sysfs-class-tpm - kernel/msm-4.9 - Gitiles

 What:		/sys/class/tpm/tpmX/device/
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	tpmdd-devel@lists.sf.net
 Description:	The device/ directory under a specific TPM instance exposes
 		the properties of that TPM chip


 What:		/sys/class/tpm/tpmX/device/active
 Date:		April 2006
 KernelVersion:	2.6.17
 Contact:	tpmdd-devel@lists.sf.net
 Description:	The "active" property prints a '1' if the TPM chip is accepting
 		commands. An inactive TPM chip still contains all the state of
 		an active chip (Storage Root Key, NVRAM, etc), and can be
 		visible to the OS, but will only accept a restricted set of
 		commands. See the TPM Main Specification part 2, Structures,
 		section 17 for more information on which commands are
 		available.

 What:		/sys/class/tpm/tpmX/device/cancel
 Date:		June 2005
 KernelVersion:	2.6.13
 Contact:	tpmdd-devel@lists.sf.net
 Description:	The "cancel" property allows you to cancel the currently
 		pending TPM command. Writing any value to cancel will call the
 		TPM vendor specific cancel operation.

 What:		/sys/class/tpm/tpmX/device/caps
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	tpmdd-devel@lists.sf.net
 Description:	The "caps" property contains TPM manufacturer and version info.

 		Example output:

 		Manufacturer: 0x53544d20
 		TCG version: 1.2
 		Firmware version: 8.16

 		Manufacturer is a hex dump of the 4 byte manufacturer info
 		space in a TPM. TCG version shows the TCG TPM spec level that
 		the chip supports. Firmware version is that of the chip and
 		is manufacturer specific.

 What:		/sys/class/tpm/tpmX/device/durations
 Date:		March 2011
 KernelVersion:	3.1
 Contact:	tpmdd-devel@lists.sf.net
 Description:	The "durations" property shows the 3 vendor-specific values
 		used to wait for a short, medium and long TPM command. All
 		TPM commands are categorized as short, medium or long in
 		execution time, so that the driver doesn't have to wait
 		any longer than necessary before starting to poll for a
 		result.

 		Example output:

 		3015000 4508000 180995000 [original]

 		Here the short, medium and long durations are displayed in
 		usecs. "[original]" indicates that the values are displayed
 		unmodified from when they were queried from the chip.
 		Durations can be modified in the case where a buggy chip
 		reports them in msec instead of usec and they need to be
 		scaled to be displayed in usecs. In this case "[adjusted]"
 		will be displayed in place of "[original]".

 What:		/sys/class/tpm/tpmX/device/enabled
 Date:		April 2006
 KernelVersion:	2.6.17
 Contact:	tpmdd-devel@lists.sf.net
 Description:	The "enabled" property prints a '1' if the TPM chip is enabled,
 		meaning that it should be visible to the OS. This property
 		may be visible but produce a '0' after some operation that
 		disables the TPM.

 What:		/sys/class/tpm/tpmX/device/owned
 Date:		April 2006
 KernelVersion:	2.6.17
 Contact:	tpmdd-devel@lists.sf.net
 Description:	The "owned" property produces a '1' if the TPM_TakeOwnership
 		ordinal has been executed successfully in the chip. A '0'
 		indicates that ownership hasn't been taken.

 What:		/sys/class/tpm/tpmX/device/pcrs
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	tpmdd-devel@lists.sf.net
 Description:	The "pcrs" property will dump the current value of all Platform
 		Configuration Registers in the TPM. Note that since these
 		values may be constantly changing, the output is only valid
 		for a snapshot in time.

 		Example output:

 		PCR-00: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
 		PCR-01: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
 		PCR-02: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
 		PCR-03: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
 		PCR-04: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
 		...

 		The number of PCRs and hex bytes needed to represent a PCR
 		value will vary depending on TPM chip version. For TPM 1.1 and
 		1.2 chips, PCRs represent SHA-1 hashes, which are 20 bytes
 		long. Use the "caps" property to determine TPM version.

 What:		/sys/class/tpm/tpmX/device/pubek
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	tpmdd-devel@lists.sf.net
 Description:	The "pubek" property will return the TPM's public endorsement
 		key if possible. If the TPM has had ownership established and
 		is version 1.2, the pubek will not be available without the
 		owner's authorization. Since the TPM driver doesn't store any
 		secrets, it can't authorize its own request for the pubek,
 		making it unaccessible. The public endorsement key is gener-
 		ated at TPM menufacture time and exists for the life of the
 		chip.

 		Example output:

 		Algorithm: 00 00 00 01
 		Encscheme: 00 03
 		Sigscheme: 00 01
 		Parameters: 00 00 08 00 00 00 00 02 00 00 00 00
 		Modulus length: 256
 		Modulus:
 		B4 76 41 82 C9 20 2C 10 18 40 BC 8B E5 44 4C 6C
 		3A B2 92 0C A4 9B 2A 83 EB 5C 12 85 04 48 A0 B6
 		1E E4 81 84 CE B2 F2 45 1C F0 85 99 61 02 4D EB
 		86 C4 F7 F3 29 60 52 93 6B B2 E5 AB 8B A9 09 E3
 		D7 0E 7D CA 41 BF 43 07 65 86 3C 8C 13 7A D0 8B
 		82 5E 96 0B F8 1F 5F 34 06 DA A2 52 C1 A9 D5 26
 		0F F4 04 4B D9 3F 2D F2 AC 2F 74 64 1F 8B CD 3E
 		1E 30 38 6C 70 63 69 AB E2 50 DF 49 05 2E E1 8D
 		6F 78 44 DA 57 43 69 EE 76 6C 38 8A E9 8E A3 F0
 		A7 1F 3C A8 D0 12 15 3E CA 0E BD FA 24 CD 33 C6
 		47 AE A4 18 83 8E 22 39 75 93 86 E6 FD 66 48 B6
 		10 AD 94 14 65 F9 6A 17 78 BD 16 53 84 30 BF 70
 		E0 DC 65 FD 3C C6 B0 1E BF B9 C1 B5 6C EF B1 3A
 		F8 28 05 83 62 26 11 DC B4 6B 5A 97 FF 32 26 B6
 		F7 02 71 CF 15 AE 16 DD D1 C1 8E A8 CF 9B 50 7B
 		C3 91 FF 44 1E CF 7C 39 FE 17 77 21 20 BD CE 9B

 		Possible values:

 		Algorithm:	TPM_ALG_RSA			(1)
 		Encscheme:	TPM_ES_RSAESPKCSv15		(2)
 				TPM_ES_RSAESOAEP_SHA1_MGF1	(3)
 		Sigscheme:	TPM_SS_NONE			(1)
 		Parameters, a byte string of 3 u32 values:
 			Key Length (bits):	00 00 08 00	(2048)
 			Num primes:		00 00 00 02	(2)
 			Exponent Size:		00 00 00 00	(0 means the
 								 default exp)
 		Modulus Length: 256 (bytes)
 		Modulus:	The 256 byte Endorsement Key modulus

 What:		/sys/class/tpm/tpmX/device/temp_deactivated
 Date:		April 2006
 KernelVersion:	2.6.17
 Contact:	tpmdd-devel@lists.sf.net
 Description:	The "temp_deactivated" property returns a '1' if the chip has
 		been temporarily dectivated, usually until the next power
 		cycle. Whether a warm boot (reboot) will clear a TPM chip
 		from a temp_deactivated state is platform specific.

 What:		/sys/class/tpm/tpmX/device/timeouts
 Date:		March 2011
 KernelVersion:	3.1
 Contact:	tpmdd-devel@lists.sf.net
 Description:	The "timeouts" property shows the 4 vendor-specific values
 		for the TPM's interface spec timeouts. The use of these
 		timeouts is defined by the TPM interface spec that the chip
 		conforms to.

 		Example output:

 		750000 750000 750000 750000 [original]

 		The four timeout values are shown in usecs, with a trailing
 		"[original]" or "[adjusted]" depending on whether the values
 		were scaled by the driver to be reported in usec from msecs.
	What: /sys/class/tpm/tpmX/device/
	Date: April 2005
	KernelVersion: 2.6.12
	Contact: tpmdd-devel@lists.sf.net
	Description: The device/ directory under a specific TPM instance exposes
	the properties of that TPM chip


	What: /sys/class/tpm/tpmX/device/active
	Date: April 2006
	KernelVersion: 2.6.17
	Contact: tpmdd-devel@lists.sf.net
	Description: The "active" property prints a '1' if the TPM chip is accepting
	commands. An inactive TPM chip still contains all the state of
	an active chip (Storage Root Key, NVRAM, etc), and can be
	visible to the OS, but will only accept a restricted set of
	commands. See the TPM Main Specification part 2, Structures,
	section 17 for more information on which commands are
	available.

	What: /sys/class/tpm/tpmX/device/cancel
	Date: June 2005
	KernelVersion: 2.6.13
	Contact: tpmdd-devel@lists.sf.net
	Description: The "cancel" property allows you to cancel the currently
	pending TPM command. Writing any value to cancel will call the
	TPM vendor specific cancel operation.

	What: /sys/class/tpm/tpmX/device/caps
	Date: April 2005
	KernelVersion: 2.6.12
	Contact: tpmdd-devel@lists.sf.net
	Description: The "caps" property contains TPM manufacturer and version info.

	Example output:

	Manufacturer: 0x53544d20
	TCG version: 1.2
	Firmware version: 8.16

	Manufacturer is a hex dump of the 4 byte manufacturer info
	space in a TPM. TCG version shows the TCG TPM spec level that
	the chip supports. Firmware version is that of the chip and
	is manufacturer specific.

	What: /sys/class/tpm/tpmX/device/durations
	Date: March 2011
	KernelVersion: 3.1
	Contact: tpmdd-devel@lists.sf.net
	Description: The "durations" property shows the 3 vendor-specific values
	used to wait for a short, medium and long TPM command. All
	TPM commands are categorized as short, medium or long in
	execution time, so that the driver doesn't have to wait
	any longer than necessary before starting to poll for a
	result.

	Example output:

	3015000 4508000 180995000 [original]

	Here the short, medium and long durations are displayed in
	usecs. "[original]" indicates that the values are displayed
	unmodified from when they were queried from the chip.
	Durations can be modified in the case where a buggy chip
	reports them in msec instead of usec and they need to be
	scaled to be displayed in usecs. In this case "[adjusted]"
	will be displayed in place of "[original]".

	What: /sys/class/tpm/tpmX/device/enabled
	Date: April 2006
	KernelVersion: 2.6.17
	Contact: tpmdd-devel@lists.sf.net
	Description: The "enabled" property prints a '1' if the TPM chip is enabled,
	meaning that it should be visible to the OS. This property
	may be visible but produce a '0' after some operation that
	disables the TPM.

	What: /sys/class/tpm/tpmX/device/owned
	Date: April 2006
	KernelVersion: 2.6.17
	Contact: tpmdd-devel@lists.sf.net
	Description: The "owned" property produces a '1' if the TPM_TakeOwnership
	ordinal has been executed successfully in the chip. A '0'
	indicates that ownership hasn't been taken.

	What: /sys/class/tpm/tpmX/device/pcrs
	Date: April 2005
	KernelVersion: 2.6.12
	Contact: tpmdd-devel@lists.sf.net
	Description: The "pcrs" property will dump the current value of all Platform
	Configuration Registers in the TPM. Note that since these
	values may be constantly changing, the output is only valid
	for a snapshot in time.

	Example output:

	PCR-00: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
	PCR-01: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
	PCR-02: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
	PCR-03: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
	PCR-04: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
	...

	The number of PCRs and hex bytes needed to represent a PCR
	value will vary depending on TPM chip version. For TPM 1.1 and
	1.2 chips, PCRs represent SHA-1 hashes, which are 20 bytes
	long. Use the "caps" property to determine TPM version.

	What: /sys/class/tpm/tpmX/device/pubek
	Date: April 2005
	KernelVersion: 2.6.12
	Contact: tpmdd-devel@lists.sf.net
	Description: The "pubek" property will return the TPM's public endorsement
	key if possible. If the TPM has had ownership established and
	is version 1.2, the pubek will not be available without the
	owner's authorization. Since the TPM driver doesn't store any
	secrets, it can't authorize its own request for the pubek,
	making it unaccessible. The public endorsement key is gener-
	ated at TPM menufacture time and exists for the life of the
	chip.

	Example output:

	Algorithm: 00 00 00 01
	Encscheme: 00 03
	Sigscheme: 00 01
	Parameters: 00 00 08 00 00 00 00 02 00 00 00 00
	Modulus length: 256
	Modulus:
	B4 76 41 82 C9 20 2C 10 18 40 BC 8B E5 44 4C 6C
	3A B2 92 0C A4 9B 2A 83 EB 5C 12 85 04 48 A0 B6
	1E E4 81 84 CE B2 F2 45 1C F0 85 99 61 02 4D EB
	86 C4 F7 F3 29 60 52 93 6B B2 E5 AB 8B A9 09 E3
	D7 0E 7D CA 41 BF 43 07 65 86 3C 8C 13 7A D0 8B
	82 5E 96 0B F8 1F 5F 34 06 DA A2 52 C1 A9 D5 26
	0F F4 04 4B D9 3F 2D F2 AC 2F 74 64 1F 8B CD 3E
	1E 30 38 6C 70 63 69 AB E2 50 DF 49 05 2E E1 8D
	6F 78 44 DA 57 43 69 EE 76 6C 38 8A E9 8E A3 F0
	A7 1F 3C A8 D0 12 15 3E CA 0E BD FA 24 CD 33 C6
	47 AE A4 18 83 8E 22 39 75 93 86 E6 FD 66 48 B6
	10 AD 94 14 65 F9 6A 17 78 BD 16 53 84 30 BF 70
	E0 DC 65 FD 3C C6 B0 1E BF B9 C1 B5 6C EF B1 3A
	F8 28 05 83 62 26 11 DC B4 6B 5A 97 FF 32 26 B6
	F7 02 71 CF 15 AE 16 DD D1 C1 8E A8 CF 9B 50 7B
	C3 91 FF 44 1E CF 7C 39 FE 17 77 21 20 BD CE 9B

	Possible values:

	Algorithm: TPM_ALG_RSA (1)
	Encscheme: TPM_ES_RSAESPKCSv15 (2)
	TPM_ES_RSAESOAEP_SHA1_MGF1 (3)
	Sigscheme: TPM_SS_NONE (1)
	Parameters, a byte string of 3 u32 values:
	Key Length (bits): 00 00 08 00 (2048)
	Num primes: 00 00 00 02 (2)
	Exponent Size: 00 00 00 00 (0 means the
	default exp)
	Modulus Length: 256 (bytes)
	Modulus: The 256 byte Endorsement Key modulus

	What: /sys/class/tpm/tpmX/device/temp_deactivated
	Date: April 2006
	KernelVersion: 2.6.17
	Contact: tpmdd-devel@lists.sf.net
	Description: The "temp_deactivated" property returns a '1' if the chip has
	been temporarily dectivated, usually until the next power
	cycle. Whether a warm boot (reboot) will clear a TPM chip
	from a temp_deactivated state is platform specific.

	What: /sys/class/tpm/tpmX/device/timeouts
	Date: March 2011
	KernelVersion: 3.1
	Contact: tpmdd-devel@lists.sf.net
	Description: The "timeouts" property shows the 4 vendor-specific values
	for the TPM's interface spec timeouts. The use of these
	timeouts is defined by the TPM interface spec that the chip
	conforms to.

	Example output:

	750000 750000 750000 750000 [original]

	The four timeout values are shown in usecs, with a trailing
	"[original]" or "[adjusted]" depending on whether the values
	were scaled by the driver to be reported in usec from msecs.