drivers/scsi/Makefile - kernel/msm-4.9 - Gitiles

 #
 # Makefile for linux/drivers/scsi
 #
 # 30 May 2000, Christoph Hellwig <hch@infradead.org>
 # Rewritten to use lists instead of if-statements.
 #
 # 20 Sep 2000, Torben Mathiasen <tmm@image.dk>
 # Changed link order to reflect new scsi initialization.
 #
 # *!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!
 # The link order must be, SCSI Core, SCSI HBA drivers, and
 # lastly SCSI peripheral drivers (disk/tape/cdrom/etc.) to
 # satisfy certain initialization assumptions in the SCSI layer.
 # *!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!


 CFLAGS_aha152x.o =   -DAHA152X_STAT -DAUTOCONF
 CFLAGS_gdth.o    = # -DDEBUG_GDTH=2 -D__SERIAL__ -D__COM2__ -DGDTH_STATISTICS

 obj-$(CONFIG_PCMCIA)		+= pcmcia/

 obj-$(CONFIG_SCSI)		+= scsi_mod.o

 obj-$(CONFIG_RAID_ATTRS)	+= raid_class.o

 # --- NOTE ORDERING HERE ---
 # For kernel non-modular link, transport attributes need to
 # be initialised before drivers
 # --------------------------
 obj-$(CONFIG_SCSI_SPI_ATTRS)	+= scsi_transport_spi.o
 obj-$(CONFIG_SCSI_FC_ATTRS) 	+= scsi_transport_fc.o
 obj-$(CONFIG_SCSI_ISCSI_ATTRS)	+= scsi_transport_iscsi.o
 obj-$(CONFIG_SCSI_SAS_ATTRS)	+= scsi_transport_sas.o
 obj-$(CONFIG_SCSI_SAS_LIBSAS)	+= libsas/
 obj-$(CONFIG_SCSI_SRP_ATTRS)	+= scsi_transport_srp.o
 obj-$(CONFIG_SCSI_DH)		+= device_handler/

 obj-$(CONFIG_LIBFC)		+= libfc/
 obj-$(CONFIG_LIBFCOE)		+= fcoe/
 obj-$(CONFIG_FCOE)		+= fcoe/
 obj-$(CONFIG_FCOE_FNIC)		+= fnic/
 obj-$(CONFIG_SCSI_BNX2X_FCOE)	+= libfc/ fcoe/ bnx2fc/
 obj-$(CONFIG_ISCSI_TCP) 	+= libiscsi.o	libiscsi_tcp.o iscsi_tcp.o
 obj-$(CONFIG_INFINIBAND_ISER) 	+= libiscsi.o
 obj-$(CONFIG_ISCSI_BOOT_SYSFS)	+= iscsi_boot_sysfs.o
 obj-$(CONFIG_SCSI_A4000T)	+= 53c700.o	a4000t.o
 obj-$(CONFIG_SCSI_ZORRO7XX)	+= 53c700.o	zorro7xx.o
 obj-$(CONFIG_A3000_SCSI)	+= a3000.o	wd33c93.o
 obj-$(CONFIG_A2091_SCSI)	+= a2091.o	wd33c93.o
 obj-$(CONFIG_GVP11_SCSI)	+= gvp11.o	wd33c93.o
 obj-$(CONFIG_MVME147_SCSI)	+= mvme147.o	wd33c93.o
 obj-$(CONFIG_SGIWD93_SCSI)	+= sgiwd93.o	wd33c93.o
 obj-$(CONFIG_ATARI_SCSI)	+= atari_scsi.o
 obj-$(CONFIG_MAC_SCSI)		+= mac_scsi.o
 obj-$(CONFIG_SCSI_MAC_ESP)	+= esp_scsi.o	mac_esp.o
 obj-$(CONFIG_SUN3_SCSI)		+= sun3_scsi.o  sun3_scsi_vme.o
 obj-$(CONFIG_MVME16x_SCSI)	+= 53c700.o	mvme16x_scsi.o
 obj-$(CONFIG_BVME6000_SCSI)	+= 53c700.o	bvme6000_scsi.o
 obj-$(CONFIG_SCSI_SIM710)	+= 53c700.o	sim710.o
 obj-$(CONFIG_SCSI_ADVANSYS)	+= advansys.o
 obj-$(CONFIG_SCSI_BUSLOGIC)	+= BusLogic.o
 obj-$(CONFIG_SCSI_DPT_I2O)	+= dpt_i2o.o
 obj-$(CONFIG_SCSI_U14_34F)	+= u14-34f.o
 obj-$(CONFIG_SCSI_ARCMSR)	+= arcmsr/
 obj-$(CONFIG_SCSI_ULTRASTOR)	+= ultrastor.o
 obj-$(CONFIG_SCSI_AHA152X)	+= aha152x.o
 obj-$(CONFIG_SCSI_AHA1542)	+= aha1542.o
 obj-$(CONFIG_SCSI_AHA1740)	+= aha1740.o
 obj-$(CONFIG_SCSI_AIC7XXX)	+= aic7xxx/
 obj-$(CONFIG_SCSI_AIC79XX)	+= aic7xxx/
 obj-$(CONFIG_SCSI_AACRAID)	+= aacraid/
 obj-$(CONFIG_SCSI_AIC94XX)	+= aic94xx/
 obj-$(CONFIG_SCSI_PM8001)	+= pm8001/
 obj-$(CONFIG_SCSI_ISCI)		+= isci/
 obj-$(CONFIG_SCSI_IPS)		+= ips.o
 obj-$(CONFIG_SCSI_FUTURE_DOMAIN)+= fdomain.o
 obj-$(CONFIG_SCSI_IN2000)	+= in2000.o
 obj-$(CONFIG_SCSI_GENERIC_NCR5380) += g_NCR5380.o
 obj-$(CONFIG_SCSI_GENERIC_NCR5380_MMIO) += g_NCR5380_mmio.o
 obj-$(CONFIG_SCSI_NCR53C406A)	+= NCR53c406a.o
 obj-$(CONFIG_SCSI_NCR_D700)	+= 53c700.o NCR_D700.o
 obj-$(CONFIG_SCSI_NCR_Q720)	+= NCR_Q720_mod.o
 obj-$(CONFIG_SCSI_SYM53C416)	+= sym53c416.o
 obj-$(CONFIG_SCSI_QLOGIC_FAS)	+= qlogicfas408.o	qlogicfas.o
 obj-$(CONFIG_PCMCIA_QLOGIC)	+= qlogicfas408.o
 obj-$(CONFIG_SCSI_QLOGIC_1280)	+= qla1280.o
 obj-$(CONFIG_SCSI_QLA_FC)	+= qla2xxx/
 obj-$(CONFIG_SCSI_QLA_ISCSI)	+= libiscsi.o qla4xxx/
 obj-$(CONFIG_SCSI_LPFC)		+= lpfc/
 obj-$(CONFIG_SCSI_BFA_FC)	+= bfa/
 obj-$(CONFIG_SCSI_CHELSIO_FCOE)	+= csiostor/
 obj-$(CONFIG_SCSI_PAS16)	+= pas16.o
 obj-$(CONFIG_SCSI_T128)		+= t128.o
 obj-$(CONFIG_SCSI_DMX3191D)	+= dmx3191d.o
 obj-$(CONFIG_SCSI_HPSA)		+= hpsa.o
 obj-$(CONFIG_SCSI_DTC3280)	+= dtc.o
 obj-$(CONFIG_SCSI_SYM53C8XX_2)	+= sym53c8xx_2/
 obj-$(CONFIG_SCSI_ZALON)	+= zalon7xx.o
 obj-$(CONFIG_SCSI_EATA_PIO)	+= eata_pio.o
 obj-$(CONFIG_SCSI_7000FASST)	+= wd7000.o
 obj-$(CONFIG_SCSI_EATA)		+= eata.o
 obj-$(CONFIG_SCSI_DC395x)	+= dc395x.o
 obj-$(CONFIG_SCSI_AM53C974)	+= esp_scsi.o	am53c974.o
 obj-$(CONFIG_MEGARAID_LEGACY)	+= megaraid.o
 obj-$(CONFIG_MEGARAID_NEWGEN)	+= megaraid/
 obj-$(CONFIG_MEGARAID_SAS)	+= megaraid/
 obj-$(CONFIG_SCSI_MPT2SAS)	+= mpt2sas/
 obj-$(CONFIG_SCSI_MPT3SAS)	+= mpt3sas/
 obj-$(CONFIG_SCSI_UFSHCD)	+= ufs/
 obj-$(CONFIG_SCSI_ACARD)	+= atp870u.o
 obj-$(CONFIG_SCSI_SUNESP)	+= esp_scsi.o	sun_esp.o
 obj-$(CONFIG_SCSI_GDTH)		+= gdth.o
 obj-$(CONFIG_SCSI_INITIO)	+= initio.o
 obj-$(CONFIG_SCSI_INIA100)	+= a100u2w.o
 obj-$(CONFIG_SCSI_QLOGICPTI)	+= qlogicpti.o
 obj-$(CONFIG_SCSI_MESH)		+= mesh.o
 obj-$(CONFIG_SCSI_MAC53C94)	+= mac53c94.o
 obj-$(CONFIG_BLK_DEV_3W_XXXX_RAID) += 3w-xxxx.o
 obj-$(CONFIG_SCSI_3W_9XXX)	+= 3w-9xxx.o
 obj-$(CONFIG_SCSI_3W_SAS)	+= 3w-sas.o
 obj-$(CONFIG_SCSI_PPA)		+= ppa.o
 obj-$(CONFIG_SCSI_IMM)		+= imm.o
 obj-$(CONFIG_JAZZ_ESP)		+= esp_scsi.o	jazz_esp.o
 obj-$(CONFIG_SUN3X_ESP)		+= esp_scsi.o	sun3x_esp.o
 obj-$(CONFIG_SCSI_LASI700)	+= 53c700.o lasi700.o
 obj-$(CONFIG_SCSI_SNI_53C710)	+= 53c700.o sni_53c710.o
 obj-$(CONFIG_SCSI_NSP32)	+= nsp32.o
 obj-$(CONFIG_SCSI_IPR)		+= ipr.o
 obj-$(CONFIG_SCSI_IBMVSCSI)	+= ibmvscsi/
 obj-$(CONFIG_SCSI_IBMVFC)	+= ibmvscsi/
 obj-$(CONFIG_SCSI_HPTIOP)	+= hptiop.o
 obj-$(CONFIG_SCSI_STEX)		+= stex.o
 obj-$(CONFIG_SCSI_MVSAS)	+= mvsas/
 obj-$(CONFIG_SCSI_MVUMI)	+= mvumi.o
 obj-$(CONFIG_PS3_ROM)		+= ps3rom.o
 obj-$(CONFIG_SCSI_CXGB3_ISCSI)	+= libiscsi.o libiscsi_tcp.o cxgbi/
 obj-$(CONFIG_SCSI_CXGB4_ISCSI)	+= libiscsi.o libiscsi_tcp.o cxgbi/
 obj-$(CONFIG_SCSI_BNX2_ISCSI)	+= libiscsi.o bnx2i/
 obj-$(CONFIG_BE2ISCSI)		+= libiscsi.o be2iscsi/
 obj-$(CONFIG_SCSI_ESAS2R)	+= esas2r/
 obj-$(CONFIG_SCSI_PMCRAID)	+= pmcraid.o
 obj-$(CONFIG_SCSI_VIRTIO)	+= virtio_scsi.o
 obj-$(CONFIG_VMWARE_PVSCSI)	+= vmw_pvscsi.o
 obj-$(CONFIG_XEN_SCSI_FRONTEND)	+= xen-scsifront.o
 obj-$(CONFIG_HYPERV_STORAGE)	+= hv_storvsc.o
 obj-$(CONFIG_SCSI_WD719X)	+= wd719x.o

 obj-$(CONFIG_ARM)		+= arm/

 obj-$(CONFIG_CHR_DEV_ST)	+= st.o
 obj-$(CONFIG_CHR_DEV_OSST)	+= osst.o
 obj-$(CONFIG_BLK_DEV_SD)	+= sd_mod.o
 obj-$(CONFIG_BLK_DEV_SR)	+= sr_mod.o
 obj-$(CONFIG_CHR_DEV_SG)	+= sg.o
 obj-$(CONFIG_CHR_DEV_SCH)	+= ch.o
 obj-$(CONFIG_SCSI_ENCLOSURE)	+= ses.o

 obj-$(CONFIG_SCSI_OSD_INITIATOR) += osd/

 # This goes last, so that "real" scsi devices probe earlier
 obj-$(CONFIG_SCSI_DEBUG)	+= scsi_debug.o

 scsi_mod-y			+= scsi.o hosts.o scsi_ioctl.o constants.o \
 				   scsicam.o scsi_error.o scsi_lib.o
 scsi_mod-$(CONFIG_SCSI_DMA)	+= scsi_lib_dma.o
 scsi_mod-y			+= scsi_scan.o scsi_sysfs.o scsi_devinfo.o
 scsi_mod-$(CONFIG_SCSI_NETLINK)	+= scsi_netlink.o
 scsi_mod-$(CONFIG_SYSCTL)	+= scsi_sysctl.o
 scsi_mod-$(CONFIG_SCSI_PROC_FS)	+= scsi_proc.o
 scsi_mod-y			+= scsi_trace.o
 scsi_mod-$(CONFIG_PM)		+= scsi_pm.o

 hv_storvsc-y			:= storvsc_drv.o

 sd_mod-objs	:= sd.o
 sd_mod-$(CONFIG_BLK_DEV_INTEGRITY) += sd_dif.o

 sr_mod-objs	:= sr.o sr_ioctl.o sr_vendor.o
 ncr53c8xx-flags-$(CONFIG_SCSI_ZALON) \
 		:= -DCONFIG_NCR53C8XX_PREFETCH -DSCSI_NCR_BIG_ENDIAN \
 			-DCONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
 CFLAGS_ncr53c8xx.o	:= $(ncr53c8xx-flags-y) $(ncr53c8xx-flags-m)
 zalon7xx-objs	:= zalon.o ncr53c8xx.o
 NCR_Q720_mod-objs	:= NCR_Q720.o ncr53c8xx.o
 oktagon_esp_mod-objs	:= oktagon_esp.o oktagon_io.o

 # Files generated that shall be removed upon make clean
 clean-files :=	53c700_d.h 53c700_u.h

 $(obj)/53c700.o $(MODVERDIR)/$(obj)/53c700.ver: $(obj)/53c700_d.h

 # If you want to play with the firmware, uncomment
 # GENERATE_FIRMWARE := 1

 ifdef GENERATE_FIRMWARE

 $(obj)/53c700_d.h: $(src)/53c700.scr $(src)/script_asm.pl
 	$(PERL) -s $(src)/script_asm.pl -ncr7x0_family $@ $(@:_d.h=_u.h) < $<

 endif
	#
	# Makefile for linux/drivers/scsi
	#
	# 30 May 2000, Christoph Hellwig <hch@infradead.org>
	# Rewritten to use lists instead of if-statements.
	#
	# 20 Sep 2000, Torben Mathiasen <tmm@image.dk>
	# Changed link order to reflect new scsi initialization.
	#
	# !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	# The link order must be, SCSI Core, SCSI HBA drivers, and
	# lastly SCSI peripheral drivers (disk/tape/cdrom/etc.) to
	# satisfy certain initialization assumptions in the SCSI layer.
	# !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!


	CFLAGS_aha152x.o = -DAHA152X_STAT -DAUTOCONF
	CFLAGS_gdth.o = # -DDEBUG_GDTH=2 -D__SERIAL__ -D__COM2__ -DGDTH_STATISTICS

	obj-$(CONFIG_PCMCIA) += pcmcia/

	obj-$(CONFIG_SCSI) += scsi_mod.o

	obj-$(CONFIG_RAID_ATTRS) += raid_class.o

	# --- NOTE ORDERING HERE ---
	# For kernel non-modular link, transport attributes need to
	# be initialised before drivers
	# --------------------------
	obj-$(CONFIG_SCSI_SPI_ATTRS) += scsi_transport_spi.o
	obj-$(CONFIG_SCSI_FC_ATTRS) += scsi_transport_fc.o
	obj-$(CONFIG_SCSI_ISCSI_ATTRS) += scsi_transport_iscsi.o
	obj-$(CONFIG_SCSI_SAS_ATTRS) += scsi_transport_sas.o
	obj-$(CONFIG_SCSI_SAS_LIBSAS) += libsas/
	obj-$(CONFIG_SCSI_SRP_ATTRS) += scsi_transport_srp.o
	obj-$(CONFIG_SCSI_DH) += device_handler/

	obj-$(CONFIG_LIBFC) += libfc/
	obj-$(CONFIG_LIBFCOE) += fcoe/
	obj-$(CONFIG_FCOE) += fcoe/
	obj-$(CONFIG_FCOE_FNIC) += fnic/
	obj-$(CONFIG_SCSI_BNX2X_FCOE) += libfc/ fcoe/ bnx2fc/
	obj-$(CONFIG_ISCSI_TCP) += libiscsi.o libiscsi_tcp.o iscsi_tcp.o
	obj-$(CONFIG_INFINIBAND_ISER) += libiscsi.o
	obj-$(CONFIG_ISCSI_BOOT_SYSFS) += iscsi_boot_sysfs.o
	obj-$(CONFIG_SCSI_A4000T) += 53c700.o a4000t.o
	obj-$(CONFIG_SCSI_ZORRO7XX) += 53c700.o zorro7xx.o
	obj-$(CONFIG_A3000_SCSI) += a3000.o wd33c93.o
	obj-$(CONFIG_A2091_SCSI) += a2091.o wd33c93.o
	obj-$(CONFIG_GVP11_SCSI) += gvp11.o wd33c93.o
	obj-$(CONFIG_MVME147_SCSI) += mvme147.o wd33c93.o
	obj-$(CONFIG_SGIWD93_SCSI) += sgiwd93.o wd33c93.o
	obj-$(CONFIG_ATARI_SCSI) += atari_scsi.o
	obj-$(CONFIG_MAC_SCSI) += mac_scsi.o
	obj-$(CONFIG_SCSI_MAC_ESP) += esp_scsi.o mac_esp.o
	obj-$(CONFIG_SUN3_SCSI) += sun3_scsi.o sun3_scsi_vme.o
	obj-$(CONFIG_MVME16x_SCSI) += 53c700.o mvme16x_scsi.o
	obj-$(CONFIG_BVME6000_SCSI) += 53c700.o bvme6000_scsi.o
	obj-$(CONFIG_SCSI_SIM710) += 53c700.o sim710.o
	obj-$(CONFIG_SCSI_ADVANSYS) += advansys.o
	obj-$(CONFIG_SCSI_BUSLOGIC) += BusLogic.o
	obj-$(CONFIG_SCSI_DPT_I2O) += dpt_i2o.o
	obj-$(CONFIG_SCSI_U14_34F) += u14-34f.o
	obj-$(CONFIG_SCSI_ARCMSR) += arcmsr/
	obj-$(CONFIG_SCSI_ULTRASTOR) += ultrastor.o
	obj-$(CONFIG_SCSI_AHA152X) += aha152x.o
	obj-$(CONFIG_SCSI_AHA1542) += aha1542.o
	obj-$(CONFIG_SCSI_AHA1740) += aha1740.o
	obj-$(CONFIG_SCSI_AIC7XXX) += aic7xxx/
	obj-$(CONFIG_SCSI_AIC79XX) += aic7xxx/
	obj-$(CONFIG_SCSI_AACRAID) += aacraid/
	obj-$(CONFIG_SCSI_AIC94XX) += aic94xx/
	obj-$(CONFIG_SCSI_PM8001) += pm8001/
	obj-$(CONFIG_SCSI_ISCI) += isci/
	obj-$(CONFIG_SCSI_IPS) += ips.o
	obj-$(CONFIG_SCSI_FUTURE_DOMAIN)+= fdomain.o
	obj-$(CONFIG_SCSI_IN2000) += in2000.o
	obj-$(CONFIG_SCSI_GENERIC_NCR5380) += g_NCR5380.o
	obj-$(CONFIG_SCSI_GENERIC_NCR5380_MMIO) += g_NCR5380_mmio.o
	obj-$(CONFIG_SCSI_NCR53C406A) += NCR53c406a.o
	obj-$(CONFIG_SCSI_NCR_D700) += 53c700.o NCR_D700.o
	obj-$(CONFIG_SCSI_NCR_Q720) += NCR_Q720_mod.o
	obj-$(CONFIG_SCSI_SYM53C416) += sym53c416.o
	obj-$(CONFIG_SCSI_QLOGIC_FAS) += qlogicfas408.o qlogicfas.o
	obj-$(CONFIG_PCMCIA_QLOGIC) += qlogicfas408.o
	obj-$(CONFIG_SCSI_QLOGIC_1280) += qla1280.o
	obj-$(CONFIG_SCSI_QLA_FC) += qla2xxx/
	obj-$(CONFIG_SCSI_QLA_ISCSI) += libiscsi.o qla4xxx/
	obj-$(CONFIG_SCSI_LPFC) += lpfc/
	obj-$(CONFIG_SCSI_BFA_FC) += bfa/
	obj-$(CONFIG_SCSI_CHELSIO_FCOE) += csiostor/
	obj-$(CONFIG_SCSI_PAS16) += pas16.o
	obj-$(CONFIG_SCSI_T128) += t128.o
	obj-$(CONFIG_SCSI_DMX3191D) += dmx3191d.o
	obj-$(CONFIG_SCSI_HPSA) += hpsa.o
	obj-$(CONFIG_SCSI_DTC3280) += dtc.o
	obj-$(CONFIG_SCSI_SYM53C8XX_2) += sym53c8xx_2/
	obj-$(CONFIG_SCSI_ZALON) += zalon7xx.o
	obj-$(CONFIG_SCSI_EATA_PIO) += eata_pio.o
	obj-$(CONFIG_SCSI_7000FASST) += wd7000.o
	obj-$(CONFIG_SCSI_EATA) += eata.o
	obj-$(CONFIG_SCSI_DC395x) += dc395x.o
	obj-$(CONFIG_SCSI_AM53C974) += esp_scsi.o am53c974.o
	obj-$(CONFIG_MEGARAID_LEGACY) += megaraid.o
	obj-$(CONFIG_MEGARAID_NEWGEN) += megaraid/
	obj-$(CONFIG_MEGARAID_SAS) += megaraid/
	obj-$(CONFIG_SCSI_MPT2SAS) += mpt2sas/
	obj-$(CONFIG_SCSI_MPT3SAS) += mpt3sas/
	obj-$(CONFIG_SCSI_UFSHCD) += ufs/
	obj-$(CONFIG_SCSI_ACARD) += atp870u.o
	obj-$(CONFIG_SCSI_SUNESP) += esp_scsi.o sun_esp.o
	obj-$(CONFIG_SCSI_GDTH) += gdth.o
	obj-$(CONFIG_SCSI_INITIO) += initio.o
	obj-$(CONFIG_SCSI_INIA100) += a100u2w.o
	obj-$(CONFIG_SCSI_QLOGICPTI) += qlogicpti.o
	obj-$(CONFIG_SCSI_MESH) += mesh.o
	obj-$(CONFIG_SCSI_MAC53C94) += mac53c94.o
	obj-$(CONFIG_BLK_DEV_3W_XXXX_RAID) += 3w-xxxx.o
	obj-$(CONFIG_SCSI_3W_9XXX) += 3w-9xxx.o
	obj-$(CONFIG_SCSI_3W_SAS) += 3w-sas.o
	obj-$(CONFIG_SCSI_PPA) += ppa.o
	obj-$(CONFIG_SCSI_IMM) += imm.o
	obj-$(CONFIG_JAZZ_ESP) += esp_scsi.o jazz_esp.o
	obj-$(CONFIG_SUN3X_ESP) += esp_scsi.o sun3x_esp.o
	obj-$(CONFIG_SCSI_LASI700) += 53c700.o lasi700.o
	obj-$(CONFIG_SCSI_SNI_53C710) += 53c700.o sni_53c710.o
	obj-$(CONFIG_SCSI_NSP32) += nsp32.o
	obj-$(CONFIG_SCSI_IPR) += ipr.o
	obj-$(CONFIG_SCSI_IBMVSCSI) += ibmvscsi/
	obj-$(CONFIG_SCSI_IBMVFC) += ibmvscsi/
	obj-$(CONFIG_SCSI_HPTIOP) += hptiop.o
	obj-$(CONFIG_SCSI_STEX) += stex.o
	obj-$(CONFIG_SCSI_MVSAS) += mvsas/
	obj-$(CONFIG_SCSI_MVUMI) += mvumi.o
	obj-$(CONFIG_PS3_ROM) += ps3rom.o
	obj-$(CONFIG_SCSI_CXGB3_ISCSI) += libiscsi.o libiscsi_tcp.o cxgbi/
	obj-$(CONFIG_SCSI_CXGB4_ISCSI) += libiscsi.o libiscsi_tcp.o cxgbi/
	obj-$(CONFIG_SCSI_BNX2_ISCSI) += libiscsi.o bnx2i/
	obj-$(CONFIG_BE2ISCSI) += libiscsi.o be2iscsi/
	obj-$(CONFIG_SCSI_ESAS2R) += esas2r/
	obj-$(CONFIG_SCSI_PMCRAID) += pmcraid.o
	obj-$(CONFIG_SCSI_VIRTIO) += virtio_scsi.o
	obj-$(CONFIG_VMWARE_PVSCSI) += vmw_pvscsi.o
	obj-$(CONFIG_XEN_SCSI_FRONTEND) += xen-scsifront.o
	obj-$(CONFIG_HYPERV_STORAGE) += hv_storvsc.o
	obj-$(CONFIG_SCSI_WD719X) += wd719x.o

	obj-$(CONFIG_ARM) += arm/

	obj-$(CONFIG_CHR_DEV_ST) += st.o
	obj-$(CONFIG_CHR_DEV_OSST) += osst.o
	obj-$(CONFIG_BLK_DEV_SD) += sd_mod.o
	obj-$(CONFIG_BLK_DEV_SR) += sr_mod.o
	obj-$(CONFIG_CHR_DEV_SG) += sg.o
	obj-$(CONFIG_CHR_DEV_SCH) += ch.o
	obj-$(CONFIG_SCSI_ENCLOSURE) += ses.o

	obj-$(CONFIG_SCSI_OSD_INITIATOR) += osd/

	# This goes last, so that "real" scsi devices probe earlier
	obj-$(CONFIG_SCSI_DEBUG) += scsi_debug.o

	scsi_mod-y += scsi.o hosts.o scsi_ioctl.o constants.o \
	scsicam.o scsi_error.o scsi_lib.o
	scsi_mod-$(CONFIG_SCSI_DMA) += scsi_lib_dma.o
	scsi_mod-y += scsi_scan.o scsi_sysfs.o scsi_devinfo.o
	scsi_mod-$(CONFIG_SCSI_NETLINK) += scsi_netlink.o
	scsi_mod-$(CONFIG_SYSCTL) += scsi_sysctl.o
	scsi_mod-$(CONFIG_SCSI_PROC_FS) += scsi_proc.o
	scsi_mod-y += scsi_trace.o
	scsi_mod-$(CONFIG_PM) += scsi_pm.o

	hv_storvsc-y := storvsc_drv.o

	sd_mod-objs := sd.o
	sd_mod-$(CONFIG_BLK_DEV_INTEGRITY) += sd_dif.o

	sr_mod-objs := sr.o sr_ioctl.o sr_vendor.o
	ncr53c8xx-flags-$(CONFIG_SCSI_ZALON) \
	:= -DCONFIG_NCR53C8XX_PREFETCH -DSCSI_NCR_BIG_ENDIAN \
	-DCONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
	CFLAGS_ncr53c8xx.o := $(ncr53c8xx-flags-y) $(ncr53c8xx-flags-m)
	zalon7xx-objs := zalon.o ncr53c8xx.o
	NCR_Q720_mod-objs := NCR_Q720.o ncr53c8xx.o
	oktagon_esp_mod-objs := oktagon_esp.o oktagon_io.o

	# Files generated that shall be removed upon make clean
	clean-files := 53c700_d.h 53c700_u.h

	$(obj)/53c700.o $(MODVERDIR)/$(obj)/53c700.ver: $(obj)/53c700_d.h

	# If you want to play with the firmware, uncomment
	# GENERATE_FIRMWARE := 1

	ifdef GENERATE_FIRMWARE

	$(obj)/53c700_d.h: $(src)/53c700.scr $(src)/script_asm.pl
	$(PERL) -s $(src)/script_asm.pl -ncr7x0_family $@ $(@:_d.h=_u.h) < $<

	endif