[PATCH] pcmcia: use bitfield instead of p_state and state
Instead of the two status values struct pcmcia_device->p_state and state,
use descriptive bitfields. Most value-checking in drivers was invalid, as
the core now only calls the ->remove() (a.k.a. detach) function in case the
attachement _and_ configuration was successful.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c
index b443220..9f59827 100644
--- a/drivers/scsi/pcmcia/sym53c500_cs.c
+++ b/drivers/scsi/pcmcia/sym53c500_cs.c
@@ -736,9 +736,6 @@
(pcmcia_get_tuple_data(link, &tuple) == CS_SUCCESS))
info->manf_id = le16_to_cpu(tuple.TupleData[0]);
- /* Configure card */
- link->state |= DEV_CONFIG;
-
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
while (1) {
@@ -836,7 +833,6 @@
scsi_scan_host(host);
- link->state &= ~DEV_CONFIG_PENDING;
return 0;
err_free_irq:
@@ -846,7 +842,6 @@
err_release:
release_region(port_base, 0x10);
printk(KERN_INFO "sym53c500_cs: no SCSI devices found\n");
- link->state &= ~DEV_CONFIG_PENDING;
return -ENODEV;
cs_failed:
@@ -859,21 +854,19 @@
{
struct scsi_info_t *info = link->priv;
- if (link->state & DEV_CONFIG) {
- /* See earlier comment about manufacturer IDs. */
- if ((info->manf_id == MANFID_MACNICA) ||
- (info->manf_id == MANFID_PIONEER) ||
- (info->manf_id == 0x0098)) {
- outb(0x80, link->io.BasePort1 + 0xd);
- outb(0x24, link->io.BasePort1 + 0x9);
- outb(0x04, link->io.BasePort1 + 0xd);
- }
- /*
- * If things don't work after a "resume",
- * this is a good place to start looking.
- */
- SYM53C500_int_host_reset(link->io.BasePort1);
+ /* See earlier comment about manufacturer IDs. */
+ if ((info->manf_id == MANFID_MACNICA) ||
+ (info->manf_id == MANFID_PIONEER) ||
+ (info->manf_id == 0x0098)) {
+ outb(0x80, link->io.BasePort1 + 0xd);
+ outb(0x24, link->io.BasePort1 + 0x9);
+ outb(0x04, link->io.BasePort1 + 0xd);
}
+ /*
+ * If things don't work after a "resume",
+ * this is a good place to start looking.
+ */
+ SYM53C500_int_host_reset(link->io.BasePort1);
return 0;
}
@@ -883,8 +876,7 @@
{
DEBUG(0, "SYM53C500_detach(0x%p)\n", link);
- if (link->state & DEV_CONFIG)
- SYM53C500_release(link);
+ SYM53C500_release(link);
kfree(link->priv);
link->priv = NULL;
@@ -913,7 +905,6 @@
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.Present = PRESENT_OPTION;
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
return SYM53C500_config(link);
} /* SYM53C500_attach */