ASoC: tlv320aic3x: Convert mic bias to a supply widget
Convert MicBias widgets to supply widget.
On tlv320aic3x, Mic bias power on/off shares the same register bits
with output mic bias voltage. So, when power on mic bias, we need
reclaim it to voltage value.
Provide a new platform data so that the micbias voltage can be sent
according to board requirement. Now since tlv320aic3x codec driver
is DT aware, update dt files and functions to handle this new
"micbias-vg" platform data.
Because of sharing of bits, when enabling the micbias, voltage also
needs to be updated. So use SND_SOC_DAPM_POST_PMU & SND_SOC_DAPM_PRE_PMD
macro to create an event to handle this.
Since micbias is converted to supply widget, updated machine drivers as
well.
This change is runtime tested on da850-evm with audio loopback
(arecord|aplay) for confirmation.
Signed-off-by: Hebbar Gururaja <gururaja.hebbar@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c
index 5708a97..ba82ba2 100644
--- a/sound/soc/codecs/tlv320aic3x.c
+++ b/sound/soc/codecs/tlv320aic3x.c
@@ -85,6 +85,9 @@
#define AIC3X_MODEL_33 1
#define AIC3X_MODEL_3007 2
u16 model;
+
+ /* Selects the micbias voltage */
+ enum aic3x_micbias_voltage micbias_vg;
};
/*
@@ -195,6 +198,37 @@
return ret;
}
+/*
+ * mic bias power on/off share the same register bits with
+ * output voltage of mic bias. when power on mic bias, we
+ * need reclaim it to voltage value.
+ * 0x0 = Powered off
+ * 0x1 = MICBIAS output is powered to 2.0V,
+ * 0x2 = MICBIAS output is powered to 2.5V
+ * 0x3 = MICBIAS output is connected to AVDD
+ */
+static int mic_bias_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+ struct aic3x_priv *aic3x = snd_soc_codec_get_drvdata(codec);
+
+ switch (event) {
+ case SND_SOC_DAPM_POST_PMU:
+ /* change mic bias voltage to user defined */
+ snd_soc_update_bits(codec, MICBIAS_CTRL,
+ MICBIAS_LEVEL_MASK,
+ aic3x->micbias_vg << MICBIAS_LEVEL_SHIFT);
+ break;
+
+ case SND_SOC_DAPM_PRE_PMD:
+ snd_soc_update_bits(codec, MICBIAS_CTRL,
+ MICBIAS_LEVEL_MASK, 0);
+ break;
+ }
+ return 0;
+}
+
static const char *aic3x_left_dac_mux[] = { "DAC_L1", "DAC_L3", "DAC_L2" };
static const char *aic3x_right_dac_mux[] = { "DAC_R1", "DAC_R3", "DAC_R2" };
static const char *aic3x_left_hpcom_mux[] =
@@ -596,12 +630,9 @@
AIC3X_ASD_INTF_CTRLA, 0, 3, 3, 0),
/* Mic Bias */
- SND_SOC_DAPM_REG(snd_soc_dapm_micbias, "Mic Bias 2V",
- MICBIAS_CTRL, 6, 3, 1, 0),
- SND_SOC_DAPM_REG(snd_soc_dapm_micbias, "Mic Bias 2.5V",
- MICBIAS_CTRL, 6, 3, 2, 0),
- SND_SOC_DAPM_REG(snd_soc_dapm_micbias, "Mic Bias AVDD",
- MICBIAS_CTRL, 6, 3, 3, 0),
+ SND_SOC_DAPM_SUPPLY("Mic Bias", MICBIAS_CTRL, 6, 0,
+ mic_bias_event,
+ SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
/* Output mixers */
SND_SOC_DAPM_MIXER("Left Line Mixer", SND_SOC_NOPM, 0, 0,
@@ -1386,6 +1417,24 @@
if (aic3x->model == AIC3X_MODEL_3007)
snd_soc_add_codec_controls(codec, &aic3x_classd_amp_gain_ctrl, 1);
+ /* set mic bias voltage */
+ switch (aic3x->micbias_vg) {
+ case AIC3X_MICBIAS_2_0V:
+ case AIC3X_MICBIAS_2_5V:
+ case AIC3X_MICBIAS_AVDDV:
+ snd_soc_update_bits(codec, MICBIAS_CTRL,
+ MICBIAS_LEVEL_MASK,
+ (aic3x->micbias_vg) << MICBIAS_LEVEL_SHIFT);
+ break;
+ case AIC3X_MICBIAS_OFF:
+ /*
+ * noting to do. target won't enter here. This is just to avoid
+ * compile time warning "warning: enumeration value
+ * 'AIC3X_MICBIAS_OFF' not handled in switch"
+ */
+ break;
+ }
+
aic3x_add_widgets(codec);
list_add(&aic3x->list, &reset_list);
@@ -1461,6 +1510,7 @@
struct aic3x_setup_data *ai3x_setup;
struct device_node *np = i2c->dev.of_node;
int ret;
+ u32 value;
aic3x = devm_kzalloc(&i2c->dev, sizeof(struct aic3x_priv), GFP_KERNEL);
if (aic3x == NULL) {
@@ -1474,6 +1524,7 @@
if (pdata) {
aic3x->gpio_reset = pdata->gpio_reset;
aic3x->setup = pdata->setup;
+ aic3x->micbias_vg = pdata->micbias_vg;
} else if (np) {
ai3x_setup = devm_kzalloc(&i2c->dev, sizeof(*ai3x_setup),
GFP_KERNEL);
@@ -1493,6 +1544,26 @@
aic3x->setup = ai3x_setup;
}
+ if (!of_property_read_u32(np, "ai3x-micbias-vg", &value)) {
+ switch (value) {
+ case 1 :
+ aic3x->micbias_vg = AIC3X_MICBIAS_2_0V;
+ break;
+ case 2 :
+ aic3x->micbias_vg = AIC3X_MICBIAS_2_5V;
+ break;
+ case 3 :
+ aic3x->micbias_vg = AIC3X_MICBIAS_AVDDV;
+ break;
+ default :
+ aic3x->micbias_vg = AIC3X_MICBIAS_OFF;
+ dev_err(&i2c->dev, "Unsuitable MicBias voltage "
+ "found in DT\n");
+ }
+ } else {
+ aic3x->micbias_vg = AIC3X_MICBIAS_OFF;
+ }
+
} else {
aic3x->gpio_reset = -1;
}
diff --git a/sound/soc/codecs/tlv320aic3x.h b/sound/soc/codecs/tlv320aic3x.h
index 6db3c41..e521ac3 100644
--- a/sound/soc/codecs/tlv320aic3x.h
+++ b/sound/soc/codecs/tlv320aic3x.h
@@ -238,6 +238,10 @@
/* Default input volume */
#define DEFAULT_GAIN 0x20
+/* MICBIAS Control Register */
+#define MICBIAS_LEVEL_SHIFT (6)
+#define MICBIAS_LEVEL_MASK (3 << 6)
+
/* headset detection / button API */
/* The AIC3x supports detection of stereo headsets (GND + left + right signal)