USB: ehci-atmel: rework clk handling
The EHCI IP only needs the UTMI/UPLL (uclk) and the peripheral (iclk)
clocks to work properly. Remove the useless system clock (fclk).
Avoid calling set_rate on the fixed rate UTMI/IPLL clock and remove
useless IS_ENABLED(CONFIG_COMMON_CLK) tests (all at91 platforms have been
moved to the CCF).
This patch also fixes a bug introduced by 3440ef1 (ARM: at91/dt: fix USB
high-speed clock to select UTMI), which was leaving the usb clock
uninitialized and preventing the OHCI driver from setting the usb clock
rate to 48MHz.
This bug was caused by several things:
1/ usb clock drivers set the CLK_SET_RATE_GATE flag, which means the rate
cannot be changed once the clock is prepared
2/ The EHCI driver was retrieving and preparing/enabling the uhpck
clock which was in turn preparing its parent clock (the usb clock),
thus preventing any rate change because of 1/
Fixes: 3440ef169100 ("ARM: at91/dt: fix USB high-speed clock to select UTMI")
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c
index 663f790..be0964a 100644
--- a/drivers/usb/host/ehci-atmel.c
+++ b/drivers/usb/host/ehci-atmel.c
@@ -34,7 +34,6 @@
struct atmel_ehci_priv {
struct clk *iclk;
- struct clk *fclk;
struct clk *uclk;
bool clocked;
};
@@ -51,12 +50,9 @@
{
if (atmel_ehci->clocked)
return;
- if (IS_ENABLED(CONFIG_COMMON_CLK)) {
- clk_set_rate(atmel_ehci->uclk, 48000000);
- clk_prepare_enable(atmel_ehci->uclk);
- }
+
+ clk_prepare_enable(atmel_ehci->uclk);
clk_prepare_enable(atmel_ehci->iclk);
- clk_prepare_enable(atmel_ehci->fclk);
atmel_ehci->clocked = true;
}
@@ -64,10 +60,9 @@
{
if (!atmel_ehci->clocked)
return;
- clk_disable_unprepare(atmel_ehci->fclk);
+
clk_disable_unprepare(atmel_ehci->iclk);
- if (IS_ENABLED(CONFIG_COMMON_CLK))
- clk_disable_unprepare(atmel_ehci->uclk);
+ clk_disable_unprepare(atmel_ehci->uclk);
atmel_ehci->clocked = false;
}
@@ -146,20 +141,13 @@
retval = -ENOENT;
goto fail_request_resource;
}
- atmel_ehci->fclk = devm_clk_get(&pdev->dev, "uhpck");
- if (IS_ERR(atmel_ehci->fclk)) {
- dev_err(&pdev->dev, "Error getting function clock\n");
- retval = -ENOENT;
+
+ atmel_ehci->uclk = devm_clk_get(&pdev->dev, "usb_clk");
+ if (IS_ERR(atmel_ehci->uclk)) {
+ dev_err(&pdev->dev, "failed to get uclk\n");
+ retval = PTR_ERR(atmel_ehci->uclk);
goto fail_request_resource;
}
- if (IS_ENABLED(CONFIG_COMMON_CLK)) {
- atmel_ehci->uclk = devm_clk_get(&pdev->dev, "usb_clk");
- if (IS_ERR(atmel_ehci->uclk)) {
- dev_err(&pdev->dev, "failed to get uclk\n");
- retval = PTR_ERR(atmel_ehci->uclk);
- goto fail_request_resource;
- }
- }
ehci = hcd_to_ehci(hcd);
/* registers start at offset 0x0 */