[SCSI] bfa: Add diagnostic port (D-Port) support
- Introduced support for D-Port which is a new port mode during which
link level diagnostics can be run.
- Provided mechanism to dynamically configure D-Port and initiate diagnostic
tests to isolate any link level issues.
- In D-Port mode, the HBA port does not participate in fabric or login to the
remote device or run data traffic.
- Diagnostic tests include running various loopback tests in conjunction with
the attached device.
Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
diff --git a/drivers/scsi/bfa/bfa_defs.h b/drivers/scsi/bfa/bfa_defs.h
index 4e77776..b4d5d87 100644
--- a/drivers/scsi/bfa/bfa_defs.h
+++ b/drivers/scsi/bfa/bfa_defs.h
@@ -165,6 +165,7 @@
BFA_STATUS_MEMTEST_FAILED = 90, /* Memory test failed contact support */
BFA_STATUS_LEDTEST_OP = 109, /* LED test is operating */
BFA_STATUS_INVALID_MAC = 134, /* Invalid MAC address */
+ BFA_STATUS_CMD_NOTSUPP_CNA = 146, /* Command not supported for CNA */
BFA_STATUS_PBC = 154, /* Operation not allowed for pre-boot
* configuration */
BFA_STATUS_BAD_FWCFG = 156, /* Bad firmware configuration */
@@ -189,6 +190,10 @@
BFA_STATUS_TOPOLOGY_LOOP = 230, /* Topology is set to Loop */
BFA_STATUS_LOOP_UNSUPP_MEZZ = 231, /* Loop topology is not supported
* on mezz cards */
+ BFA_STATUS_DPORT_ENABLED = 235, /* D-port mode is already enabled */
+ BFA_STATUS_DPORT_DISABLED = 236, /* D-port mode is already disabled */
+ BFA_STATUS_CMD_NOTSUPP_MEZZ = 239, /* Cmd not supported for MEZZ card */
+ BFA_STATUS_DPORT_ERR = 245, /* D-port mode is enabled */
BFA_STATUS_MAX_VAL /* Unknown error code */
};
#define bfa_status_t enum bfa_status
@@ -508,6 +513,17 @@
};
/*
+ * D-port states
+ *
+*/
+enum bfa_dport_state {
+ BFA_DPORT_ST_DISABLED = 0, /* D-port is Disabled */
+ BFA_DPORT_ST_DISABLING = 1, /* D-port is Disabling */
+ BFA_DPORT_ST_ENABLING = 2, /* D-port is Enabling */
+ BFA_DPORT_ST_ENABLED = 3, /* D-port is Enabled */
+};
+
+/*
* ---------------------- mfg definitions ------------
*/