| /* |
| * $Id: magellan.c,v 1.16 2002/01/22 20:28:39 vojtech Exp $ |
| * |
| * Copyright (c) 1999-2001 Vojtech Pavlik |
| */ |
| |
| /* |
| * Magellan and Space Mouse 6dof controller driver for Linux |
| */ |
| |
| /* |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| * Should you need to contact me, the author, you can do so either by |
| * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail: |
| * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/input.h> |
| #include <linux/serio.h> |
| #include <linux/init.h> |
| |
| #define DRIVER_DESC "Magellan and SpaceMouse 6dof controller driver" |
| |
| MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>"); |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_LICENSE("GPL"); |
| |
| /* |
| * Definitions & global arrays. |
| */ |
| |
| #define MAGELLAN_MAX_LENGTH 32 |
| |
| static int magellan_buttons[] = { BTN_0, BTN_1, BTN_2, BTN_3, BTN_4, BTN_5, BTN_6, BTN_7, BTN_8 }; |
| static int magellan_axes[] = { ABS_X, ABS_Y, ABS_Z, ABS_RX, ABS_RY, ABS_RZ }; |
| |
| /* |
| * Per-Magellan data. |
| */ |
| |
| struct magellan { |
| struct input_dev *dev; |
| int idx; |
| unsigned char data[MAGELLAN_MAX_LENGTH]; |
| char phys[32]; |
| }; |
| |
| /* |
| * magellan_crunch_nibbles() verifies that the bytes sent from the Magellan |
| * have correct upper nibbles for the lower ones, if not, the packet will |
| * be thrown away. It also strips these upper halves to simplify further |
| * processing. |
| */ |
| |
| static int magellan_crunch_nibbles(unsigned char *data, int count) |
| { |
| static unsigned char nibbles[16] = "0AB3D56GH9:K<MN?"; |
| |
| do { |
| if (data[count] == nibbles[data[count] & 0xf]) |
| data[count] = data[count] & 0xf; |
| else |
| return -1; |
| } while (--count); |
| |
| return 0; |
| } |
| |
| static void magellan_process_packet(struct magellan* magellan) |
| { |
| struct input_dev *dev = magellan->dev; |
| unsigned char *data = magellan->data; |
| int i, t; |
| |
| if (!magellan->idx) return; |
| |
| switch (magellan->data[0]) { |
| |
| case 'd': /* Axis data */ |
| if (magellan->idx != 25) return; |
| if (magellan_crunch_nibbles(data, 24)) return; |
| for (i = 0; i < 6; i++) |
| input_report_abs(dev, magellan_axes[i], |
| (data[(i << 2) + 1] << 12 | data[(i << 2) + 2] << 8 | |
| data[(i << 2) + 3] << 4 | data[(i << 2) + 4]) - 32768); |
| break; |
| |
| case 'k': /* Button data */ |
| if (magellan->idx != 4) return; |
| if (magellan_crunch_nibbles(data, 3)) return; |
| t = (data[1] << 1) | (data[2] << 5) | data[3]; |
| for (i = 0; i < 9; i++) input_report_key(dev, magellan_buttons[i], (t >> i) & 1); |
| break; |
| } |
| |
| input_sync(dev); |
| } |
| |
| static irqreturn_t magellan_interrupt(struct serio *serio, |
| unsigned char data, unsigned int flags) |
| { |
| struct magellan* magellan = serio_get_drvdata(serio); |
| |
| if (data == '\r') { |
| magellan_process_packet(magellan); |
| magellan->idx = 0; |
| } else { |
| if (magellan->idx < MAGELLAN_MAX_LENGTH) |
| magellan->data[magellan->idx++] = data; |
| } |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * magellan_disconnect() is the opposite of magellan_connect() |
| */ |
| |
| static void magellan_disconnect(struct serio *serio) |
| { |
| struct magellan* magellan = serio_get_drvdata(serio); |
| |
| serio_close(serio); |
| serio_set_drvdata(serio, NULL); |
| input_unregister_device(magellan->dev); |
| kfree(magellan); |
| } |
| |
| /* |
| * magellan_connect() is the routine that is called when someone adds a |
| * new serio device that supports Magellan protocol and registers it as |
| * an input device. |
| */ |
| |
| static int magellan_connect(struct serio *serio, struct serio_driver *drv) |
| { |
| struct magellan *magellan; |
| struct input_dev *input_dev; |
| int err = -ENOMEM; |
| int i; |
| |
| magellan = kzalloc(sizeof(struct magellan), GFP_KERNEL); |
| input_dev = input_allocate_device(); |
| if (!magellan || !input_dev) |
| goto fail1; |
| |
| magellan->dev = input_dev; |
| snprintf(magellan->phys, sizeof(magellan->phys), "%s/input0", serio->phys); |
| |
| input_dev->name = "LogiCad3D Magellan / SpaceMouse"; |
| input_dev->phys = magellan->phys; |
| input_dev->id.bustype = BUS_RS232; |
| input_dev->id.vendor = SERIO_MAGELLAN; |
| input_dev->id.product = 0x0001; |
| input_dev->id.version = 0x0100; |
| input_dev->dev.parent = &serio->dev; |
| |
| input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); |
| |
| for (i = 0; i < 9; i++) |
| set_bit(magellan_buttons[i], input_dev->keybit); |
| |
| for (i = 0; i < 6; i++) |
| input_set_abs_params(input_dev, magellan_axes[i], -360, 360, 0, 0); |
| |
| serio_set_drvdata(serio, magellan); |
| |
| err = serio_open(serio, drv); |
| if (err) |
| goto fail2; |
| |
| err = input_register_device(magellan->dev); |
| if (err) |
| goto fail3; |
| |
| return 0; |
| |
| fail3: serio_close(serio); |
| fail2: serio_set_drvdata(serio, NULL); |
| fail1: input_free_device(input_dev); |
| kfree(magellan); |
| return err; |
| } |
| |
| /* |
| * The serio driver structure. |
| */ |
| |
| static struct serio_device_id magellan_serio_ids[] = { |
| { |
| .type = SERIO_RS232, |
| .proto = SERIO_MAGELLAN, |
| .id = SERIO_ANY, |
| .extra = SERIO_ANY, |
| }, |
| { 0 } |
| }; |
| |
| MODULE_DEVICE_TABLE(serio, magellan_serio_ids); |
| |
| static struct serio_driver magellan_drv = { |
| .driver = { |
| .name = "magellan", |
| }, |
| .description = DRIVER_DESC, |
| .id_table = magellan_serio_ids, |
| .interrupt = magellan_interrupt, |
| .connect = magellan_connect, |
| .disconnect = magellan_disconnect, |
| }; |
| |
| /* |
| * The functions for inserting/removing us as a module. |
| */ |
| |
| static int __init magellan_init(void) |
| { |
| return serio_register_driver(&magellan_drv); |
| } |
| |
| static void __exit magellan_exit(void) |
| { |
| serio_unregister_driver(&magellan_drv); |
| } |
| |
| module_init(magellan_init); |
| module_exit(magellan_exit); |