| /* |
| * TI LP8788 MFD - buck regulator driver |
| * |
| * Copyright 2012 Texas Instruments |
| * |
| * Author: Milo(Woogyom) Kim <milo.kim@ti.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/err.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/mfd/lp8788.h> |
| #include <linux/gpio.h> |
| |
| /* register address */ |
| #define LP8788_EN_BUCK 0x0C |
| #define LP8788_BUCK_DVS_SEL 0x1D |
| #define LP8788_BUCK1_VOUT0 0x1E |
| #define LP8788_BUCK1_VOUT1 0x1F |
| #define LP8788_BUCK1_VOUT2 0x20 |
| #define LP8788_BUCK1_VOUT3 0x21 |
| #define LP8788_BUCK2_VOUT0 0x22 |
| #define LP8788_BUCK2_VOUT1 0x23 |
| #define LP8788_BUCK2_VOUT2 0x24 |
| #define LP8788_BUCK2_VOUT3 0x25 |
| #define LP8788_BUCK3_VOUT 0x26 |
| #define LP8788_BUCK4_VOUT 0x27 |
| #define LP8788_BUCK1_TIMESTEP 0x28 |
| #define LP8788_BUCK_PWM 0x2D |
| |
| /* mask/shift bits */ |
| #define LP8788_EN_BUCK1_M BIT(0) /* Addr 0Ch */ |
| #define LP8788_EN_BUCK2_M BIT(1) |
| #define LP8788_EN_BUCK3_M BIT(2) |
| #define LP8788_EN_BUCK4_M BIT(3) |
| #define LP8788_BUCK1_DVS_SEL_M 0x04 /* Addr 1Dh */ |
| #define LP8788_BUCK1_DVS_M 0x03 |
| #define LP8788_BUCK1_DVS_S 0 |
| #define LP8788_BUCK2_DVS_SEL_M 0x40 |
| #define LP8788_BUCK2_DVS_M 0x30 |
| #define LP8788_BUCK2_DVS_S 4 |
| #define LP8788_BUCK1_DVS_I2C BIT(2) |
| #define LP8788_BUCK2_DVS_I2C BIT(6) |
| #define LP8788_BUCK1_DVS_PIN (0 << 2) |
| #define LP8788_BUCK2_DVS_PIN (0 << 6) |
| #define LP8788_VOUT_M 0x1F /* Addr 1Eh ~ 27h */ |
| #define LP8788_STARTUP_TIME_M 0xF8 /* Addr 28h ~ 2Bh */ |
| #define LP8788_STARTUP_TIME_S 3 |
| #define LP8788_FPWM_BUCK1_M BIT(0) /* Addr 2Dh */ |
| #define LP8788_FPWM_BUCK1_S 0 |
| #define LP8788_FPWM_BUCK2_M BIT(1) |
| #define LP8788_FPWM_BUCK2_S 1 |
| #define LP8788_FPWM_BUCK3_M BIT(2) |
| #define LP8788_FPWM_BUCK3_S 2 |
| #define LP8788_FPWM_BUCK4_M BIT(3) |
| #define LP8788_FPWM_BUCK4_S 3 |
| |
| #define INVALID_ADDR 0xFF |
| #define LP8788_FORCE_PWM 1 |
| #define LP8788_AUTO_PWM 0 |
| #define PIN_LOW 0 |
| #define PIN_HIGH 1 |
| #define ENABLE_TIME_USEC 32 |
| |
| #define BUCK_FPWM_MASK(x) (1 << (x)) |
| #define BUCK_FPWM_SHIFT(x) (x) |
| |
| enum lp8788_dvs_state { |
| DVS_LOW = GPIOF_OUT_INIT_LOW, |
| DVS_HIGH = GPIOF_OUT_INIT_HIGH, |
| }; |
| |
| enum lp8788_dvs_mode { |
| REGISTER, |
| EXTPIN, |
| }; |
| |
| enum lp8788_buck_id { |
| BUCK1, |
| BUCK2, |
| BUCK3, |
| BUCK4, |
| }; |
| |
| struct lp8788_buck { |
| struct lp8788 *lp; |
| struct regulator_dev *regulator; |
| void *dvs; |
| }; |
| |
| /* BUCK 1 ~ 4 voltage table */ |
| static const int lp8788_buck_vtbl[] = { |
| 500000, 800000, 850000, 900000, 950000, 1000000, 1050000, 1100000, |
| 1150000, 1200000, 1250000, 1300000, 1350000, 1400000, 1450000, 1500000, |
| 1550000, 1600000, 1650000, 1700000, 1750000, 1800000, 1850000, 1900000, |
| 1950000, 2000000, |
| }; |
| |
| static void lp8788_buck1_set_dvs(struct lp8788_buck *buck) |
| { |
| struct lp8788_buck1_dvs *dvs = (struct lp8788_buck1_dvs *)buck->dvs; |
| enum lp8788_dvs_state pinstate; |
| |
| if (!dvs) |
| return; |
| |
| pinstate = dvs->vsel == DVS_SEL_V0 ? DVS_LOW : DVS_HIGH; |
| if (gpio_is_valid(dvs->gpio)) |
| gpio_set_value(dvs->gpio, pinstate); |
| } |
| |
| static void lp8788_buck2_set_dvs(struct lp8788_buck *buck) |
| { |
| struct lp8788_buck2_dvs *dvs = (struct lp8788_buck2_dvs *)buck->dvs; |
| enum lp8788_dvs_state pin1, pin2; |
| |
| if (!dvs) |
| return; |
| |
| switch (dvs->vsel) { |
| case DVS_SEL_V0: |
| pin1 = DVS_LOW; |
| pin2 = DVS_LOW; |
| break; |
| case DVS_SEL_V1: |
| pin1 = DVS_HIGH; |
| pin2 = DVS_LOW; |
| break; |
| case DVS_SEL_V2: |
| pin1 = DVS_LOW; |
| pin2 = DVS_HIGH; |
| break; |
| case DVS_SEL_V3: |
| pin1 = DVS_HIGH; |
| pin2 = DVS_HIGH; |
| break; |
| default: |
| return; |
| } |
| |
| if (gpio_is_valid(dvs->gpio[0])) |
| gpio_set_value(dvs->gpio[0], pin1); |
| |
| if (gpio_is_valid(dvs->gpio[1])) |
| gpio_set_value(dvs->gpio[1], pin2); |
| } |
| |
| static void lp8788_set_dvs(struct lp8788_buck *buck, enum lp8788_buck_id id) |
| { |
| switch (id) { |
| case BUCK1: |
| lp8788_buck1_set_dvs(buck); |
| break; |
| case BUCK2: |
| lp8788_buck2_set_dvs(buck); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static enum lp8788_dvs_mode |
| lp8788_get_buck_dvs_ctrl_mode(struct lp8788_buck *buck, enum lp8788_buck_id id) |
| { |
| u8 val, mask; |
| |
| switch (id) { |
| case BUCK1: |
| mask = LP8788_BUCK1_DVS_SEL_M; |
| break; |
| case BUCK2: |
| mask = LP8788_BUCK2_DVS_SEL_M; |
| break; |
| default: |
| return REGISTER; |
| } |
| |
| lp8788_read_byte(buck->lp, LP8788_BUCK_DVS_SEL, &val); |
| |
| return val & mask ? REGISTER : EXTPIN; |
| } |
| |
| static bool lp8788_is_valid_buck_addr(u8 addr) |
| { |
| switch (addr) { |
| case LP8788_BUCK1_VOUT0: |
| case LP8788_BUCK1_VOUT1: |
| case LP8788_BUCK1_VOUT2: |
| case LP8788_BUCK1_VOUT3: |
| case LP8788_BUCK2_VOUT0: |
| case LP8788_BUCK2_VOUT1: |
| case LP8788_BUCK2_VOUT2: |
| case LP8788_BUCK2_VOUT3: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static u8 lp8788_select_buck_vout_addr(struct lp8788_buck *buck, |
| enum lp8788_buck_id id) |
| { |
| enum lp8788_dvs_mode mode = lp8788_get_buck_dvs_ctrl_mode(buck, id); |
| struct lp8788_buck1_dvs *b1_dvs; |
| struct lp8788_buck2_dvs *b2_dvs; |
| u8 val, idx, addr; |
| int pin1, pin2; |
| |
| switch (id) { |
| case BUCK1: |
| if (mode == EXTPIN) { |
| b1_dvs = (struct lp8788_buck1_dvs *)buck->dvs; |
| if (!b1_dvs) |
| goto err; |
| |
| idx = gpio_get_value(b1_dvs->gpio) ? 1 : 0; |
| } else { |
| lp8788_read_byte(buck->lp, LP8788_BUCK_DVS_SEL, &val); |
| idx = (val & LP8788_BUCK1_DVS_M) >> LP8788_BUCK1_DVS_S; |
| } |
| addr = LP8788_BUCK1_VOUT0 + idx; |
| break; |
| case BUCK2: |
| if (mode == EXTPIN) { |
| b2_dvs = (struct lp8788_buck2_dvs *)buck->dvs; |
| if (!b2_dvs) |
| goto err; |
| |
| pin1 = gpio_get_value(b2_dvs->gpio[0]); |
| pin2 = gpio_get_value(b2_dvs->gpio[1]); |
| |
| if (pin1 == PIN_LOW && pin2 == PIN_LOW) |
| idx = 0; |
| else if (pin1 == PIN_LOW && pin2 == PIN_HIGH) |
| idx = 2; |
| else if (pin1 == PIN_HIGH && pin2 == PIN_LOW) |
| idx = 1; |
| else |
| idx = 3; |
| } else { |
| lp8788_read_byte(buck->lp, LP8788_BUCK_DVS_SEL, &val); |
| idx = (val & LP8788_BUCK2_DVS_M) >> LP8788_BUCK2_DVS_S; |
| } |
| addr = LP8788_BUCK2_VOUT0 + idx; |
| break; |
| default: |
| goto err; |
| } |
| |
| return addr; |
| err: |
| return INVALID_ADDR; |
| } |
| |
| static int lp8788_buck12_set_voltage_sel(struct regulator_dev *rdev, |
| unsigned selector) |
| { |
| struct lp8788_buck *buck = rdev_get_drvdata(rdev); |
| enum lp8788_buck_id id = rdev_get_id(rdev); |
| u8 addr; |
| |
| if (buck->dvs) |
| lp8788_set_dvs(buck, id); |
| |
| addr = lp8788_select_buck_vout_addr(buck, id); |
| if (!lp8788_is_valid_buck_addr(addr)) |
| return -EINVAL; |
| |
| return lp8788_update_bits(buck->lp, addr, LP8788_VOUT_M, selector); |
| } |
| |
| static int lp8788_buck12_get_voltage_sel(struct regulator_dev *rdev) |
| { |
| struct lp8788_buck *buck = rdev_get_drvdata(rdev); |
| enum lp8788_buck_id id = rdev_get_id(rdev); |
| int ret; |
| u8 val, addr; |
| |
| addr = lp8788_select_buck_vout_addr(buck, id); |
| if (!lp8788_is_valid_buck_addr(addr)) |
| return -EINVAL; |
| |
| ret = lp8788_read_byte(buck->lp, addr, &val); |
| if (ret) |
| return ret; |
| |
| return val & LP8788_VOUT_M; |
| } |
| |
| static int lp8788_buck_enable_time(struct regulator_dev *rdev) |
| { |
| struct lp8788_buck *buck = rdev_get_drvdata(rdev); |
| enum lp8788_buck_id id = rdev_get_id(rdev); |
| u8 val, addr = LP8788_BUCK1_TIMESTEP + id; |
| |
| if (lp8788_read_byte(buck->lp, addr, &val)) |
| return -EINVAL; |
| |
| val = (val & LP8788_STARTUP_TIME_M) >> LP8788_STARTUP_TIME_S; |
| |
| return ENABLE_TIME_USEC * val; |
| } |
| |
| static int lp8788_buck_set_mode(struct regulator_dev *rdev, unsigned int mode) |
| { |
| struct lp8788_buck *buck = rdev_get_drvdata(rdev); |
| enum lp8788_buck_id id = rdev_get_id(rdev); |
| u8 mask, val; |
| |
| mask = BUCK_FPWM_MASK(id); |
| switch (mode) { |
| case REGULATOR_MODE_FAST: |
| val = LP8788_FORCE_PWM << BUCK_FPWM_SHIFT(id); |
| break; |
| case REGULATOR_MODE_NORMAL: |
| val = LP8788_AUTO_PWM << BUCK_FPWM_SHIFT(id); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return lp8788_update_bits(buck->lp, LP8788_BUCK_PWM, mask, val); |
| } |
| |
| static unsigned int lp8788_buck_get_mode(struct regulator_dev *rdev) |
| { |
| struct lp8788_buck *buck = rdev_get_drvdata(rdev); |
| enum lp8788_buck_id id = rdev_get_id(rdev); |
| u8 val; |
| int ret; |
| |
| ret = lp8788_read_byte(buck->lp, LP8788_BUCK_PWM, &val); |
| if (ret) |
| return ret; |
| |
| return val & BUCK_FPWM_MASK(id) ? |
| REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL; |
| } |
| |
| static struct regulator_ops lp8788_buck12_ops = { |
| .list_voltage = regulator_list_voltage_table, |
| .map_voltage = regulator_map_voltage_ascend, |
| .set_voltage_sel = lp8788_buck12_set_voltage_sel, |
| .get_voltage_sel = lp8788_buck12_get_voltage_sel, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| .enable_time = lp8788_buck_enable_time, |
| .set_mode = lp8788_buck_set_mode, |
| .get_mode = lp8788_buck_get_mode, |
| }; |
| |
| static struct regulator_ops lp8788_buck34_ops = { |
| .list_voltage = regulator_list_voltage_table, |
| .map_voltage = regulator_map_voltage_ascend, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| .enable_time = lp8788_buck_enable_time, |
| .set_mode = lp8788_buck_set_mode, |
| .get_mode = lp8788_buck_get_mode, |
| }; |
| |
| static struct regulator_desc lp8788_buck_desc[] = { |
| { |
| .name = "buck1", |
| .id = BUCK1, |
| .ops = &lp8788_buck12_ops, |
| .n_voltages = ARRAY_SIZE(lp8788_buck_vtbl), |
| .volt_table = lp8788_buck_vtbl, |
| .type = REGULATOR_VOLTAGE, |
| .owner = THIS_MODULE, |
| .enable_reg = LP8788_EN_BUCK, |
| .enable_mask = LP8788_EN_BUCK1_M, |
| }, |
| { |
| .name = "buck2", |
| .id = BUCK2, |
| .ops = &lp8788_buck12_ops, |
| .n_voltages = ARRAY_SIZE(lp8788_buck_vtbl), |
| .volt_table = lp8788_buck_vtbl, |
| .type = REGULATOR_VOLTAGE, |
| .owner = THIS_MODULE, |
| .enable_reg = LP8788_EN_BUCK, |
| .enable_mask = LP8788_EN_BUCK2_M, |
| }, |
| { |
| .name = "buck3", |
| .id = BUCK3, |
| .ops = &lp8788_buck34_ops, |
| .n_voltages = ARRAY_SIZE(lp8788_buck_vtbl), |
| .volt_table = lp8788_buck_vtbl, |
| .type = REGULATOR_VOLTAGE, |
| .owner = THIS_MODULE, |
| .vsel_reg = LP8788_BUCK3_VOUT, |
| .vsel_mask = LP8788_VOUT_M, |
| .enable_reg = LP8788_EN_BUCK, |
| .enable_mask = LP8788_EN_BUCK3_M, |
| }, |
| { |
| .name = "buck4", |
| .id = BUCK4, |
| .ops = &lp8788_buck34_ops, |
| .n_voltages = ARRAY_SIZE(lp8788_buck_vtbl), |
| .volt_table = lp8788_buck_vtbl, |
| .type = REGULATOR_VOLTAGE, |
| .owner = THIS_MODULE, |
| .vsel_reg = LP8788_BUCK4_VOUT, |
| .vsel_mask = LP8788_VOUT_M, |
| .enable_reg = LP8788_EN_BUCK, |
| .enable_mask = LP8788_EN_BUCK4_M, |
| }, |
| }; |
| |
| static int lp8788_dvs_gpio_request(struct platform_device *pdev, |
| struct lp8788_buck *buck, |
| enum lp8788_buck_id id) |
| { |
| struct lp8788_platform_data *pdata = buck->lp->pdata; |
| char *b1_name = "LP8788_B1_DVS"; |
| char *b2_name[] = { "LP8788_B2_DVS1", "LP8788_B2_DVS2" }; |
| int i, gpio, ret; |
| |
| switch (id) { |
| case BUCK1: |
| gpio = pdata->buck1_dvs->gpio; |
| ret = devm_gpio_request_one(&pdev->dev, gpio, DVS_LOW, |
| b1_name); |
| if (ret) |
| return ret; |
| |
| buck->dvs = pdata->buck1_dvs; |
| break; |
| case BUCK2: |
| for (i = 0; i < LP8788_NUM_BUCK2_DVS; i++) { |
| gpio = pdata->buck2_dvs->gpio[i]; |
| ret = devm_gpio_request_one(&pdev->dev, gpio, |
| DVS_LOW, b2_name[i]); |
| if (ret) |
| return ret; |
| } |
| buck->dvs = pdata->buck2_dvs; |
| break; |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int lp8788_init_dvs(struct platform_device *pdev, |
| struct lp8788_buck *buck, enum lp8788_buck_id id) |
| { |
| struct lp8788_platform_data *pdata = buck->lp->pdata; |
| u8 mask[] = { LP8788_BUCK1_DVS_SEL_M, LP8788_BUCK2_DVS_SEL_M }; |
| u8 val[] = { LP8788_BUCK1_DVS_PIN, LP8788_BUCK2_DVS_PIN }; |
| u8 default_dvs_mode[] = { LP8788_BUCK1_DVS_I2C, LP8788_BUCK2_DVS_I2C }; |
| |
| /* no dvs for buck3, 4 */ |
| if (id > BUCK2) |
| return 0; |
| |
| /* no dvs platform data, then dvs will be selected by I2C registers */ |
| if (!pdata) |
| goto set_default_dvs_mode; |
| |
| if ((id == BUCK1 && !pdata->buck1_dvs) || |
| (id == BUCK2 && !pdata->buck2_dvs)) |
| goto set_default_dvs_mode; |
| |
| if (lp8788_dvs_gpio_request(pdev, buck, id)) |
| goto set_default_dvs_mode; |
| |
| return lp8788_update_bits(buck->lp, LP8788_BUCK_DVS_SEL, mask[id], |
| val[id]); |
| |
| set_default_dvs_mode: |
| return lp8788_update_bits(buck->lp, LP8788_BUCK_DVS_SEL, mask[id], |
| default_dvs_mode[id]); |
| } |
| |
| static int lp8788_buck_probe(struct platform_device *pdev) |
| { |
| struct lp8788 *lp = dev_get_drvdata(pdev->dev.parent); |
| int id = pdev->id; |
| struct lp8788_buck *buck; |
| struct regulator_config cfg = { }; |
| struct regulator_dev *rdev; |
| int ret; |
| |
| if (id >= LP8788_NUM_BUCKS) |
| return -EINVAL; |
| |
| buck = devm_kzalloc(&pdev->dev, sizeof(struct lp8788_buck), GFP_KERNEL); |
| if (!buck) |
| return -ENOMEM; |
| |
| buck->lp = lp; |
| |
| ret = lp8788_init_dvs(pdev, buck, id); |
| if (ret) |
| return ret; |
| |
| cfg.dev = pdev->dev.parent; |
| cfg.init_data = lp->pdata ? lp->pdata->buck_data[id] : NULL; |
| cfg.driver_data = buck; |
| cfg.regmap = lp->regmap; |
| |
| rdev = devm_regulator_register(&pdev->dev, &lp8788_buck_desc[id], &cfg); |
| if (IS_ERR(rdev)) { |
| ret = PTR_ERR(rdev); |
| dev_err(&pdev->dev, "BUCK%d regulator register err = %d\n", |
| id + 1, ret); |
| return ret; |
| } |
| |
| buck->regulator = rdev; |
| platform_set_drvdata(pdev, buck); |
| |
| return 0; |
| } |
| |
| static struct platform_driver lp8788_buck_driver = { |
| .probe = lp8788_buck_probe, |
| .driver = { |
| .name = LP8788_DEV_BUCK, |
| }, |
| }; |
| |
| static int __init lp8788_buck_init(void) |
| { |
| return platform_driver_register(&lp8788_buck_driver); |
| } |
| subsys_initcall(lp8788_buck_init); |
| |
| static void __exit lp8788_buck_exit(void) |
| { |
| platform_driver_unregister(&lp8788_buck_driver); |
| } |
| module_exit(lp8788_buck_exit); |
| |
| MODULE_DESCRIPTION("TI LP8788 BUCK Driver"); |
| MODULE_AUTHOR("Milo Kim"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:lp8788-buck"); |