libertas: add support for Marvell SD8688 chip
libertas: add support for Marvell SD8688 chip
Use RxPD->pkt_ptr to locate eth803 header in the packet
received since SD8688/v10 firmware allows a gap between
RxPD and eth803 header.
Set SDIO block size to 256 for CMD53.
The maximum block size for SD8688 WLAN function is set
to 512 in TPLFE_MAX_BLK_SIZE. But using 512 as block size
results upto 2K bytes data (4 blocks) being transferred
and causes buffer overflow in firmware.
Both changes above are backward compatible with earlier
firmware versions for SD8385/SD8686.
The SDIO_DEVICE_IDs for SD8688 chip are added in
include/linux/mmc/sdio_ids.h
Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/libertas/rx.c b/drivers/net/wireless/libertas/rx.c
index 820c22d..bd845d0 100644
--- a/drivers/net/wireless/libertas/rx.c
+++ b/drivers/net/wireless/libertas/rx.c
@@ -25,7 +25,6 @@
} __attribute__ ((packed));
struct rxpackethdr {
- struct rxpd rx_pd;
struct eth803hdr eth803_hdr;
struct rfc1042hdr rfc1042_hdr;
} __attribute__ ((packed));
@@ -158,8 +157,9 @@
if (priv->monitormode)
return process_rxed_802_11_packet(priv, skb);
- p_rx_pkt = (struct rxpackethdr *) skb->data;
- p_rx_pd = &p_rx_pkt->rx_pd;
+ p_rx_pd = (struct rxpd *) skb->data;
+ p_rx_pkt = (struct rxpackethdr *) ((u8 *)p_rx_pd +
+ le32_to_cpu(p_rx_pd->pkt_ptr));
if (priv->mesh_dev) {
if (priv->mesh_fw_ver == MESH_FW_OLD) {
if (p_rx_pd->rx_control & RxPD_MESH_FRAME)
@@ -181,8 +181,9 @@
goto done;
}
- lbs_deb_rx("rx data: skb->len-sizeof(RxPd) = %d-%zd = %zd\n",
- skb->len, sizeof(struct rxpd), skb->len - sizeof(struct rxpd));
+ lbs_deb_rx("rx data: skb->len - pkt_ptr = %d-%zd = %zd\n",
+ skb->len, le32_to_cpu(p_rx_pd->pkt_ptr),
+ skb->len - le32_to_cpu(p_rx_pd->pkt_ptr));
lbs_deb_hex(LBS_DEB_RX, "RX Data: Dest", p_rx_pkt->eth803_hdr.dest_addr,
sizeof(p_rx_pkt->eth803_hdr.dest_addr));
@@ -216,14 +217,14 @@
/* Chop off the rxpd + the excess memory from the 802.2/llc/snap header
* that was removed
*/
- hdrchop = (u8 *) p_ethhdr - (u8 *) p_rx_pkt;
+ hdrchop = (u8 *)p_ethhdr - (u8 *)p_rx_pd;
} else {
lbs_deb_hex(LBS_DEB_RX, "RX Data: LLC/SNAP",
(u8 *) & p_rx_pkt->rfc1042_hdr,
sizeof(p_rx_pkt->rfc1042_hdr));
/* Chop off the rxpd */
- hdrchop = (u8 *) & p_rx_pkt->eth803_hdr - (u8 *) p_rx_pkt;
+ hdrchop = (u8 *)&p_rx_pkt->eth803_hdr - (u8 *)p_rx_pd;
}
/* Chop off the leading header bytes so the skb points to the start of