| /* |
| * Copyright (c) 2013-2016, Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #include "phy-qcom-ufs-i.h" |
| |
| #define MAX_PROP_NAME 32 |
| #define VDDA_PHY_MIN_UV 800000 |
| #define VDDA_PHY_MAX_UV 925000 |
| #define VDDA_PLL_MIN_UV 1200000 |
| #define VDDA_PLL_MAX_UV 1800000 |
| #define VDDP_REF_CLK_MIN_UV 1200000 |
| #define VDDP_REF_CLK_MAX_UV 1200000 |
| |
| #define UFS_PHY_DEFAULT_LANES_PER_DIRECTION 1 |
| |
| static int __ufs_qcom_phy_init_vreg(struct phy *, struct ufs_qcom_phy_vreg *, |
| const char *, bool); |
| static int ufs_qcom_phy_init_vreg(struct phy *, struct ufs_qcom_phy_vreg *, |
| const char *); |
| static int ufs_qcom_phy_base_init(struct platform_device *pdev, |
| struct ufs_qcom_phy *phy_common); |
| |
| void ufs_qcom_phy_write_tbl(struct ufs_qcom_phy *ufs_qcom_phy, |
| struct ufs_qcom_phy_calibration *tbl, |
| int tbl_size) |
| { |
| int i; |
| |
| for (i = 0; i < tbl_size; i++) |
| writel_relaxed(tbl[i].cfg_value, |
| ufs_qcom_phy->mmio + tbl[i].reg_offset); |
| } |
| EXPORT_SYMBOL(ufs_qcom_phy_write_tbl); |
| |
| int ufs_qcom_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy, |
| struct ufs_qcom_phy_calibration *tbl_A, |
| int tbl_size_A, |
| struct ufs_qcom_phy_calibration *tbl_B, |
| int tbl_size_B, bool is_rate_B) |
| { |
| int ret = 0; |
| |
| if (!tbl_A) { |
| dev_err(ufs_qcom_phy->dev, "%s: tbl_A is NULL", __func__); |
| ret = EINVAL; |
| goto out; |
| } |
| |
| ufs_qcom_phy_write_tbl(ufs_qcom_phy, tbl_A, tbl_size_A); |
| |
| /* |
| * In case we would like to work in rate B, we need |
| * to override a registers that were configured in rate A table |
| * with registers of rate B table. |
| * table. |
| */ |
| if (is_rate_B) { |
| if (!tbl_B) { |
| dev_err(ufs_qcom_phy->dev, "%s: tbl_B is NULL", |
| __func__); |
| ret = EINVAL; |
| goto out; |
| } |
| |
| ufs_qcom_phy_write_tbl(ufs_qcom_phy, tbl_B, tbl_size_B); |
| } |
| |
| /* flush buffered writes */ |
| mb(); |
| |
| out: |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(ufs_qcom_phy_calibrate); |
| |
| struct phy *ufs_qcom_phy_generic_probe(struct platform_device *pdev, |
| struct ufs_qcom_phy *common_cfg, |
| const struct phy_ops *ufs_qcom_phy_gen_ops, |
| struct ufs_qcom_phy_specific_ops *phy_spec_ops) |
| { |
| int err; |
| struct device *dev = &pdev->dev; |
| struct phy *generic_phy = NULL; |
| struct phy_provider *phy_provider; |
| |
| err = ufs_qcom_phy_base_init(pdev, common_cfg); |
| if (err) { |
| dev_err(dev, "%s: phy base init failed %d\n", __func__, err); |
| goto out; |
| } |
| |
| phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); |
| if (IS_ERR(phy_provider)) { |
| err = PTR_ERR(phy_provider); |
| dev_err(dev, "%s: failed to register phy %d\n", __func__, err); |
| goto out; |
| } |
| |
| generic_phy = devm_phy_create(dev, NULL, ufs_qcom_phy_gen_ops); |
| if (IS_ERR(generic_phy)) { |
| err = PTR_ERR(generic_phy); |
| dev_err(dev, "%s: failed to create phy %d\n", __func__, err); |
| generic_phy = NULL; |
| goto out; |
| } |
| |
| if (of_property_read_u32(dev->of_node, "lanes-per-direction", |
| &common_cfg->lanes_per_direction)) |
| common_cfg->lanes_per_direction = |
| UFS_PHY_DEFAULT_LANES_PER_DIRECTION; |
| |
| /* |
| * UFS PHY power management is managed by its parent (UFS host |
| * controller) hence set the no the no runtime PM callbacks flag |
| * on UFS PHY device to avoid any accidental attempt to call the |
| * PM callbacks for PHY device. |
| */ |
| pm_runtime_no_callbacks(&generic_phy->dev); |
| |
| common_cfg->phy_spec_ops = phy_spec_ops; |
| common_cfg->dev = dev; |
| |
| out: |
| return generic_phy; |
| } |
| EXPORT_SYMBOL_GPL(ufs_qcom_phy_generic_probe); |
| |
| /* |
| * This assumes the embedded phy structure inside generic_phy is of type |
| * struct ufs_qcom_phy. In order to function properly it's crucial |
| * to keep the embedded struct "struct ufs_qcom_phy common_cfg" |
| * as the first inside generic_phy. |
| */ |
| struct ufs_qcom_phy *get_ufs_qcom_phy(struct phy *generic_phy) |
| { |
| return (struct ufs_qcom_phy *)phy_get_drvdata(generic_phy); |
| } |
| EXPORT_SYMBOL_GPL(get_ufs_qcom_phy); |
| |
| static |
| int ufs_qcom_phy_base_init(struct platform_device *pdev, |
| struct ufs_qcom_phy *phy_common) |
| { |
| struct device *dev = &pdev->dev; |
| struct resource *res; |
| int err = 0; |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_mem"); |
| if (!res) { |
| dev_err(dev, "%s: phy_mem resource not found\n", __func__); |
| err = -ENOMEM; |
| goto out; |
| } |
| |
| phy_common->mmio = devm_ioremap_resource(dev, res); |
| if (IS_ERR((void const *)phy_common->mmio)) { |
| err = PTR_ERR((void const *)phy_common->mmio); |
| phy_common->mmio = NULL; |
| dev_err(dev, "%s: ioremap for phy_mem resource failed %d\n", |
| __func__, err); |
| } |
| out: |
| return err; |
| } |
| |
| static int __ufs_qcom_phy_clk_get(struct phy *phy, |
| const char *name, struct clk **clk_out, bool err_print) |
| { |
| struct clk *clk; |
| int err = 0; |
| struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy); |
| struct device *dev = ufs_qcom_phy->dev; |
| |
| clk = devm_clk_get(dev, name); |
| if (IS_ERR(clk)) { |
| err = PTR_ERR(clk); |
| if (err_print) |
| dev_err(dev, "failed to get %s err %d", name, err); |
| } else { |
| *clk_out = clk; |
| } |
| |
| return err; |
| } |
| |
| static |
| int ufs_qcom_phy_clk_get(struct phy *phy, |
| const char *name, struct clk **clk_out) |
| { |
| return __ufs_qcom_phy_clk_get(phy, name, clk_out, true); |
| } |
| |
| int |
| ufs_qcom_phy_init_clks(struct phy *generic_phy, |
| struct ufs_qcom_phy *phy_common) |
| { |
| int err; |
| |
| /* |
| * tx_iface_clk does not exist in newer version of ufs-phy HW, |
| * so don't return error if it is not found |
| */ |
| __ufs_qcom_phy_clk_get(generic_phy, "tx_iface_clk", |
| &phy_common->tx_iface_clk, false); |
| |
| /* |
| * rx_iface_clk does not exist in newer version of ufs-phy HW, |
| * so don't return error if it is not found |
| */ |
| __ufs_qcom_phy_clk_get(generic_phy, "rx_iface_clk", |
| &phy_common->rx_iface_clk, false); |
| |
| err = ufs_qcom_phy_clk_get(generic_phy, "ref_clk_src", |
| &phy_common->ref_clk_src); |
| if (err) |
| goto out; |
| |
| /* |
| * "ref_clk_parent" is optional hence don't abort init if it's not |
| * found. |
| */ |
| __ufs_qcom_phy_clk_get(generic_phy, "ref_clk_parent", |
| &phy_common->ref_clk_parent, false); |
| |
| err = ufs_qcom_phy_clk_get(generic_phy, "ref_clk", |
| &phy_common->ref_clk); |
| if (err) |
| goto out; |
| |
| /* |
| * "ref_aux_clk" is optional and only supported by certain |
| * phy versions, don't abort init if it's not found. |
| */ |
| __ufs_qcom_phy_clk_get(generic_phy, "ref_aux_clk", |
| &phy_common->ref_aux_clk, false); |
| out: |
| return err; |
| } |
| EXPORT_SYMBOL_GPL(ufs_qcom_phy_init_clks); |
| |
| int |
| ufs_qcom_phy_init_vregulators(struct phy *generic_phy, |
| struct ufs_qcom_phy *phy_common) |
| { |
| int err; |
| |
| err = ufs_qcom_phy_init_vreg(generic_phy, &phy_common->vdda_pll, |
| "vdda-pll"); |
| if (err) |
| goto out; |
| |
| err = ufs_qcom_phy_init_vreg(generic_phy, &phy_common->vdda_phy, |
| "vdda-phy"); |
| if (err) |
| goto out; |
| |
| /* vddp-ref-clk-* properties are optional */ |
| __ufs_qcom_phy_init_vreg(generic_phy, &phy_common->vddp_ref_clk, |
| "vddp-ref-clk", true); |
| out: |
| return err; |
| } |
| EXPORT_SYMBOL_GPL(ufs_qcom_phy_init_vregulators); |
| |
| static int __ufs_qcom_phy_init_vreg(struct phy *phy, |
| struct ufs_qcom_phy_vreg *vreg, const char *name, bool optional) |
| { |
| int err = 0; |
| struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy); |
| struct device *dev = ufs_qcom_phy->dev; |
| |
| char prop_name[MAX_PROP_NAME]; |
| |
| if (dev->of_node) { |
| snprintf(prop_name, MAX_PROP_NAME, "%s-supply", name); |
| if (!of_parse_phandle(dev->of_node, prop_name, 0)) { |
| dev_dbg(dev, "No vreg data found for %s\n", prop_name); |
| return optional ? err : -ENODATA; |
| } |
| } |
| |
| vreg->name = kstrdup(name, GFP_KERNEL); |
| if (!vreg->name) { |
| err = -ENOMEM; |
| goto out; |
| } |
| |
| vreg->reg = devm_regulator_get(dev, name); |
| if (IS_ERR(vreg->reg)) { |
| err = PTR_ERR(vreg->reg); |
| vreg->reg = NULL; |
| if (!optional) |
| dev_err(dev, "failed to get %s, %d\n", name, err); |
| goto out; |
| } |
| |
| if (dev->of_node) { |
| snprintf(prop_name, MAX_PROP_NAME, "%s-max-microamp", name); |
| err = of_property_read_u32(dev->of_node, |
| prop_name, &vreg->max_uA); |
| if (err && err != -EINVAL) { |
| dev_err(dev, "%s: failed to read %s\n", |
| __func__, prop_name); |
| goto out; |
| } else if (err == -EINVAL || !vreg->max_uA) { |
| if (regulator_count_voltages(vreg->reg) > 0) { |
| dev_err(dev, "%s: %s is mandatory\n", |
| __func__, prop_name); |
| goto out; |
| } |
| err = 0; |
| } |
| snprintf(prop_name, MAX_PROP_NAME, "%s-always-on", name); |
| vreg->is_always_on = of_property_read_bool(dev->of_node, |
| prop_name); |
| } |
| |
| if (!strcmp(name, "vdda-pll")) { |
| vreg->max_uV = VDDA_PLL_MAX_UV; |
| vreg->min_uV = VDDA_PLL_MIN_UV; |
| } else if (!strcmp(name, "vdda-phy")) { |
| vreg->max_uV = VDDA_PHY_MAX_UV; |
| vreg->min_uV = VDDA_PHY_MIN_UV; |
| } else if (!strcmp(name, "vddp-ref-clk")) { |
| vreg->max_uV = VDDP_REF_CLK_MAX_UV; |
| vreg->min_uV = VDDP_REF_CLK_MIN_UV; |
| } |
| |
| out: |
| if (err) |
| kfree(vreg->name); |
| return err; |
| } |
| |
| static int ufs_qcom_phy_init_vreg(struct phy *phy, |
| struct ufs_qcom_phy_vreg *vreg, const char *name) |
| { |
| return __ufs_qcom_phy_init_vreg(phy, vreg, name, false); |
| } |
| |
| static |
| int ufs_qcom_phy_cfg_vreg(struct phy *phy, |
| struct ufs_qcom_phy_vreg *vreg, bool on) |
| { |
| int ret = 0; |
| struct regulator *reg = vreg->reg; |
| const char *name = vreg->name; |
| int min_uV; |
| int uA_load; |
| struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy); |
| struct device *dev = ufs_qcom_phy->dev; |
| |
| BUG_ON(!vreg); |
| |
| if (regulator_count_voltages(reg) > 0) { |
| min_uV = on ? vreg->min_uV : 0; |
| ret = regulator_set_voltage(reg, min_uV, vreg->max_uV); |
| if (ret) { |
| dev_err(dev, "%s: %s set voltage failed, err=%d\n", |
| __func__, name, ret); |
| goto out; |
| } |
| uA_load = on ? vreg->max_uA : 0; |
| ret = regulator_set_load(reg, uA_load); |
| if (ret >= 0) { |
| /* |
| * regulator_set_load() returns new regulator |
| * mode upon success. |
| */ |
| ret = 0; |
| } else { |
| dev_err(dev, "%s: %s set optimum mode(uA_load=%d) failed, err=%d\n", |
| __func__, name, uA_load, ret); |
| goto out; |
| } |
| } |
| out: |
| return ret; |
| } |
| |
| static |
| int ufs_qcom_phy_enable_vreg(struct phy *phy, |
| struct ufs_qcom_phy_vreg *vreg) |
| { |
| struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy); |
| struct device *dev = ufs_qcom_phy->dev; |
| int ret = 0; |
| |
| if (!vreg || vreg->enabled) |
| goto out; |
| |
| ret = ufs_qcom_phy_cfg_vreg(phy, vreg, true); |
| if (ret) { |
| dev_err(dev, "%s: ufs_qcom_phy_cfg_vreg() failed, err=%d\n", |
| __func__, ret); |
| goto out; |
| } |
| |
| ret = regulator_enable(vreg->reg); |
| if (ret) { |
| dev_err(dev, "%s: enable failed, err=%d\n", |
| __func__, ret); |
| goto out; |
| } |
| |
| vreg->enabled = true; |
| out: |
| return ret; |
| } |
| |
| int ufs_qcom_phy_enable_ref_clk(struct phy *generic_phy) |
| { |
| int ret = 0; |
| struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy); |
| |
| if (phy->is_ref_clk_enabled) |
| goto out; |
| |
| /* |
| * reference clock is propagated in a daisy-chained manner from |
| * source to phy, so ungate them at each stage. |
| */ |
| ret = clk_prepare_enable(phy->ref_clk_src); |
| if (ret) { |
| dev_err(phy->dev, "%s: ref_clk_src enable failed %d\n", |
| __func__, ret); |
| goto out; |
| } |
| |
| /* |
| * "ref_clk_parent" is optional clock hence make sure that clk reference |
| * is available before trying to enable the clock. |
| */ |
| if (phy->ref_clk_parent) { |
| ret = clk_prepare_enable(phy->ref_clk_parent); |
| if (ret) { |
| dev_err(phy->dev, "%s: ref_clk_parent enable failed %d\n", |
| __func__, ret); |
| goto out_disable_src; |
| } |
| } |
| |
| ret = clk_prepare_enable(phy->ref_clk); |
| if (ret) { |
| dev_err(phy->dev, "%s: ref_clk enable failed %d\n", |
| __func__, ret); |
| goto out_disable_parent; |
| } |
| |
| /* |
| * "ref_aux_clk" is optional clock and only supported by certain |
| * phy versions, hence make sure that clk reference is available |
| * before trying to enable the clock. |
| */ |
| if (phy->ref_aux_clk) { |
| ret = clk_prepare_enable(phy->ref_aux_clk); |
| if (ret) { |
| dev_err(phy->dev, "%s: ref_aux_clk enable failed %d\n", |
| __func__, ret); |
| goto out_disable_ref; |
| } |
| } |
| |
| phy->is_ref_clk_enabled = true; |
| goto out; |
| |
| out_disable_ref: |
| if (phy->ref_clk) |
| clk_disable_unprepare(phy->ref_clk); |
| out_disable_parent: |
| if (phy->ref_clk_parent) |
| clk_disable_unprepare(phy->ref_clk_parent); |
| out_disable_src: |
| clk_disable_unprepare(phy->ref_clk_src); |
| out: |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(ufs_qcom_phy_enable_ref_clk); |
| |
| static |
| int ufs_qcom_phy_disable_vreg(struct phy *phy, |
| struct ufs_qcom_phy_vreg *vreg) |
| { |
| struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy); |
| struct device *dev = ufs_qcom_phy->dev; |
| int ret = 0; |
| |
| if (!vreg || !vreg->enabled) |
| goto out; |
| |
| if (vreg->is_always_on) { |
| /* voting 0 uA load will keep regulator in LPM mode */ |
| ret = regulator_set_load(vreg->reg, 0); |
| if (ret >= 0) { |
| /* |
| * regulator_set_load() returns new regulator |
| * mode upon success |
| */ |
| ret = 0; |
| } else { |
| dev_err(dev, "%s: %s set optimum mode(uA_load=0) failed, err=%d\n", |
| __func__, vreg->name, ret); |
| } |
| goto out; |
| } |
| |
| ret = regulator_disable(vreg->reg); |
| |
| if (!ret) { |
| /* ignore errors on applying disable config */ |
| ufs_qcom_phy_cfg_vreg(phy, vreg, false); |
| vreg->enabled = false; |
| } else { |
| dev_err(dev, "%s: %s disable failed, err=%d\n", |
| __func__, vreg->name, ret); |
| } |
| out: |
| return ret; |
| } |
| |
| void ufs_qcom_phy_disable_ref_clk(struct phy *generic_phy) |
| { |
| struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy); |
| |
| if (phy->is_ref_clk_enabled) { |
| /* |
| * "ref_aux_clk" is optional clock and only supported by |
| * certain phy versions, hence make sure that clk reference |
| * is available before trying to disable the clock. |
| */ |
| if (phy->ref_aux_clk) |
| clk_disable_unprepare(phy->ref_aux_clk); |
| clk_disable_unprepare(phy->ref_clk); |
| /* |
| * "ref_clk_parent" is optional clock hence make sure that clk |
| * reference is available before trying to disable the clock. |
| */ |
| if (phy->ref_clk_parent) |
| clk_disable_unprepare(phy->ref_clk_parent); |
| clk_disable_unprepare(phy->ref_clk_src); |
| phy->is_ref_clk_enabled = false; |
| } |
| } |
| EXPORT_SYMBOL_GPL(ufs_qcom_phy_disable_ref_clk); |
| |
| /* Turn ON M-PHY RMMI interface clocks */ |
| int ufs_qcom_phy_enable_iface_clk(struct phy *generic_phy) |
| { |
| struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy); |
| int ret = 0; |
| |
| if (phy->is_iface_clk_enabled) |
| goto out; |
| |
| if (!phy->tx_iface_clk) |
| goto out; |
| |
| ret = clk_prepare_enable(phy->tx_iface_clk); |
| if (ret) { |
| dev_err(phy->dev, "%s: tx_iface_clk enable failed %d\n", |
| __func__, ret); |
| goto out; |
| } |
| ret = clk_prepare_enable(phy->rx_iface_clk); |
| if (ret) { |
| clk_disable_unprepare(phy->tx_iface_clk); |
| dev_err(phy->dev, "%s: rx_iface_clk enable failed %d. disabling also tx_iface_clk\n", |
| __func__, ret); |
| goto out; |
| } |
| phy->is_iface_clk_enabled = true; |
| |
| out: |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(ufs_qcom_phy_enable_iface_clk); |
| |
| /* Turn OFF M-PHY RMMI interface clocks */ |
| void ufs_qcom_phy_disable_iface_clk(struct phy *generic_phy) |
| { |
| struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy); |
| |
| if (!phy->tx_iface_clk) |
| return; |
| |
| if (phy->is_iface_clk_enabled) { |
| clk_disable_unprepare(phy->tx_iface_clk); |
| clk_disable_unprepare(phy->rx_iface_clk); |
| phy->is_iface_clk_enabled = false; |
| } |
| } |
| EXPORT_SYMBOL_GPL(ufs_qcom_phy_disable_iface_clk); |
| |
| int ufs_qcom_phy_start_serdes(struct phy *generic_phy) |
| { |
| struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); |
| int ret = 0; |
| |
| if (!ufs_qcom_phy->phy_spec_ops->start_serdes) { |
| dev_err(ufs_qcom_phy->dev, "%s: start_serdes() callback is not supported\n", |
| __func__); |
| ret = -ENOTSUPP; |
| } else { |
| ufs_qcom_phy->phy_spec_ops->start_serdes(ufs_qcom_phy); |
| } |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(ufs_qcom_phy_start_serdes); |
| |
| int ufs_qcom_phy_set_tx_lane_enable(struct phy *generic_phy, u32 tx_lanes) |
| { |
| struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); |
| int ret = 0; |
| |
| if (ufs_qcom_phy->phy_spec_ops->set_tx_lane_enable) |
| ufs_qcom_phy->phy_spec_ops->set_tx_lane_enable(ufs_qcom_phy, |
| tx_lanes); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(ufs_qcom_phy_set_tx_lane_enable); |
| |
| int ufs_qcom_phy_ctrl_rx_linecfg(struct phy *generic_phy, bool ctrl) |
| { |
| struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); |
| int ret = 0; |
| |
| if (ufs_qcom_phy->phy_spec_ops->ctrl_rx_linecfg) |
| ufs_qcom_phy->phy_spec_ops->ctrl_rx_linecfg(ufs_qcom_phy, ctrl); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(ufs_qcom_phy_ctrl_rx_linecfg); |
| |
| void ufs_qcom_phy_save_controller_version(struct phy *generic_phy, |
| u8 major, u16 minor, u16 step) |
| { |
| struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); |
| |
| ufs_qcom_phy->host_ctrl_rev_major = major; |
| ufs_qcom_phy->host_ctrl_rev_minor = minor; |
| ufs_qcom_phy->host_ctrl_rev_step = step; |
| } |
| EXPORT_SYMBOL_GPL(ufs_qcom_phy_save_controller_version); |
| |
| int ufs_qcom_phy_calibrate_phy(struct phy *generic_phy, bool is_rate_B) |
| { |
| struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); |
| int ret = 0; |
| |
| if (!ufs_qcom_phy->phy_spec_ops->calibrate_phy) { |
| dev_err(ufs_qcom_phy->dev, "%s: calibrate_phy() callback is not supported\n", |
| __func__); |
| ret = -ENOTSUPP; |
| } else { |
| ret = ufs_qcom_phy->phy_spec_ops-> |
| calibrate_phy(ufs_qcom_phy, is_rate_B); |
| if (ret) |
| dev_err(ufs_qcom_phy->dev, "%s: calibrate_phy() failed %d\n", |
| __func__, ret); |
| } |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(ufs_qcom_phy_calibrate_phy); |
| |
| const char *ufs_qcom_phy_name(struct phy *phy) |
| { |
| struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy); |
| |
| return ufs_qcom_phy->name; |
| } |
| EXPORT_SYMBOL(ufs_qcom_phy_name); |
| |
| int ufs_qcom_phy_remove(struct phy *generic_phy, |
| struct ufs_qcom_phy *ufs_qcom_phy) |
| { |
| phy_power_off(generic_phy); |
| |
| kfree(ufs_qcom_phy->vdda_pll.name); |
| kfree(ufs_qcom_phy->vdda_phy.name); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(ufs_qcom_phy_remove); |
| |
| int ufs_qcom_phy_exit(struct phy *generic_phy) |
| { |
| struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); |
| |
| if (ufs_qcom_phy->is_powered_on) |
| phy_power_off(generic_phy); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(ufs_qcom_phy_exit); |
| |
| int ufs_qcom_phy_is_pcs_ready(struct phy *generic_phy) |
| { |
| struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); |
| |
| if (!ufs_qcom_phy->phy_spec_ops->is_physical_coding_sublayer_ready) { |
| dev_err(ufs_qcom_phy->dev, "%s: is_physical_coding_sublayer_ready() callback is not supported\n", |
| __func__); |
| return -ENOTSUPP; |
| } |
| |
| return ufs_qcom_phy->phy_spec_ops-> |
| is_physical_coding_sublayer_ready(ufs_qcom_phy); |
| } |
| EXPORT_SYMBOL_GPL(ufs_qcom_phy_is_pcs_ready); |
| |
| int ufs_qcom_phy_power_on(struct phy *generic_phy) |
| { |
| struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy); |
| struct device *dev = phy_common->dev; |
| int err; |
| |
| err = ufs_qcom_phy_enable_vreg(generic_phy, &phy_common->vdda_phy); |
| if (err) { |
| dev_err(dev, "%s enable vdda_phy failed, err=%d\n", |
| __func__, err); |
| goto out; |
| } |
| |
| phy_common->phy_spec_ops->power_control(phy_common, true); |
| |
| /* vdda_pll also enables ref clock LDOs so enable it first */ |
| err = ufs_qcom_phy_enable_vreg(generic_phy, &phy_common->vdda_pll); |
| if (err) { |
| dev_err(dev, "%s enable vdda_pll failed, err=%d\n", |
| __func__, err); |
| goto out_disable_phy; |
| } |
| |
| err = ufs_qcom_phy_enable_ref_clk(generic_phy); |
| if (err) { |
| dev_err(dev, "%s enable phy ref clock failed, err=%d\n", |
| __func__, err); |
| goto out_disable_pll; |
| } |
| |
| /* enable device PHY ref_clk pad rail */ |
| if (phy_common->vddp_ref_clk.reg) { |
| err = ufs_qcom_phy_enable_vreg(generic_phy, |
| &phy_common->vddp_ref_clk); |
| if (err) { |
| dev_err(dev, "%s enable vddp_ref_clk failed, err=%d\n", |
| __func__, err); |
| goto out_disable_ref_clk; |
| } |
| } |
| |
| phy_common->is_powered_on = true; |
| goto out; |
| |
| out_disable_ref_clk: |
| ufs_qcom_phy_disable_ref_clk(generic_phy); |
| out_disable_pll: |
| ufs_qcom_phy_disable_vreg(generic_phy, &phy_common->vdda_pll); |
| out_disable_phy: |
| ufs_qcom_phy_disable_vreg(generic_phy, &phy_common->vdda_phy); |
| out: |
| return err; |
| } |
| EXPORT_SYMBOL_GPL(ufs_qcom_phy_power_on); |
| |
| int ufs_qcom_phy_power_off(struct phy *generic_phy) |
| { |
| struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy); |
| |
| phy_common->phy_spec_ops->power_control(phy_common, false); |
| |
| if (phy_common->vddp_ref_clk.reg) |
| ufs_qcom_phy_disable_vreg(generic_phy, |
| &phy_common->vddp_ref_clk); |
| ufs_qcom_phy_disable_ref_clk(generic_phy); |
| |
| ufs_qcom_phy_disable_vreg(generic_phy, &phy_common->vdda_pll); |
| ufs_qcom_phy_disable_vreg(generic_phy, &phy_common->vdda_phy); |
| phy_common->is_powered_on = false; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(ufs_qcom_phy_power_off); |
| |
| int ufs_qcom_phy_configure_lpm(struct phy *generic_phy, bool enable) |
| { |
| struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); |
| int ret = 0; |
| |
| if (ufs_qcom_phy->phy_spec_ops->configure_lpm) { |
| ret = ufs_qcom_phy->phy_spec_ops-> |
| configure_lpm(ufs_qcom_phy, enable); |
| if (ret) |
| dev_err(ufs_qcom_phy->dev, |
| "%s: configure_lpm(%s) failed %d\n", |
| __func__, enable ? "enable" : "disable", ret); |
| } |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(ufs_qcom_phy_configure_lpm); |
| |
| void ufs_qcom_phy_dump_regs(struct ufs_qcom_phy *phy, int offset, |
| int len, char *prefix) |
| { |
| print_hex_dump(KERN_ERR, prefix, |
| len > 4 ? DUMP_PREFIX_OFFSET : DUMP_PREFIX_NONE, |
| 16, 4, phy->mmio + offset, len, false); |
| } |
| EXPORT_SYMBOL(ufs_qcom_phy_dump_regs); |
| |
| void ufs_qcom_phy_dbg_register_dump(struct phy *generic_phy) |
| { |
| struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); |
| |
| if (ufs_qcom_phy->phy_spec_ops->dbg_register_dump) |
| ufs_qcom_phy->phy_spec_ops->dbg_register_dump(ufs_qcom_phy); |
| } |
| EXPORT_SYMBOL(ufs_qcom_phy_dbg_register_dump); |