| /* |
| * Copyright (c) 2015-2018, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include "msm8917-pinctrl.dtsi" |
| |
| &blsp1_uart2 { |
| status = "ok"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart_console_active>; |
| }; |
| |
| &sdhc_1 { |
| /* device core power supply */ |
| vdd-supply = <&pm8937_l8>; |
| qcom,vdd-voltage-level = <2900000 2900000>; |
| qcom,vdd-current-level = <200 570000>; |
| |
| /* device communication power supply */ |
| vdd-io-supply = <&pm8937_l5>; |
| qcom,vdd-io-always-on; |
| qcom,vdd-io-lpm-sup; |
| qcom,vdd-io-voltage-level = <1800000 1800000>; |
| qcom,vdd-io-current-level = <200 325000>; |
| |
| pinctrl-names = "active", "sleep"; |
| pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>; |
| pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>; |
| |
| qcom,clk-rates = <400000 20000000 25000000 50000000 100000000 192000000 |
| 384000000>; |
| qcom,nonremovable; |
| qcom,bus-speed-mode = "HS400_1p8v", "HS200_1p8v", "DDR_1p8v"; |
| |
| status = "ok"; |
| }; |
| |
| &sdhc_2 { |
| /* device core power supply */ |
| vdd-supply = <&pm8937_l11>; |
| qcom,vdd-voltage-level = <2950000 2950000>; |
| qcom,vdd-current-level = <15000 800000>; |
| |
| /* device communication power supply */ |
| vdd-io-supply = <&pm8937_l12>; |
| qcom,vdd-io-voltage-level = <1800000 2950000>; |
| qcom,vdd-io-current-level = <200 22000>; |
| |
| pinctrl-names = "active", "sleep"; |
| pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; |
| pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; |
| |
| cd-gpios = <&tlmm 67 0x1>; |
| |
| qcom,clk-rates = <400000 20000000 25000000 50000000 100000000 |
| 200000000>; |
| qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104"; |
| |
| status = "ok"; |
| }; |
| |
| &soc { |
| hbtp { |
| compatible = "qcom,hbtp-input"; |
| vcc_ana-supply = <&pm8937_l10>; |
| vcc_dig-supply = <&pm8937_l5>; |
| qcom,afe-load = <50000>; |
| qcom,afe-vtg-min = <2850000>; |
| qcom,afe-vtg-max = <2850000>; |
| qcom,dig-load = <15000>; |
| qcom,dig-vtg-min = <1800000>; |
| qcom,dig-vtg-max = <1800000>; |
| }; |
| }; |
| |
| #include "msm8937-mdss-panels.dtsi" |
| |
| &mdss_mdp { |
| qcom,mdss-pref-prim-intf = "dsi"; |
| }; |
| |
| &mdss_dsi { |
| hw-config = "single_dsi"; |
| }; |
| |
| &mdss_dsi0 { |
| qcom,dsi-pref-prim-pan = <&dsi_truly_720_vid>; |
| pinctrl-names = "mdss_default", "mdss_sleep"; |
| pinctrl-0 = <&mdss_dsi_active &mdss_te_active>; |
| pinctrl-1 = <&mdss_dsi_suspend &mdss_te_suspend>; |
| qcom,platform-te-gpio = <&tlmm 24 0>; |
| qcom,platform-reset-gpio = <&tlmm 60 0>; |
| qcom,platform-bklight-en-gpio = <&tlmm 98 0>; |
| }; |
| |
| &dsi_truly_720_vid { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
| qcom,mdss-dsi-pan-enable-dynamic-fps; |
| qcom,mdss-dsi-pan-fps-update = "dfps_immediate_porch_mode_vfp"; |
| }; |
| |
| &dsi_truly_720_cmd { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
| qcom,ulps-enabled; |
| qcom,partial-update-enabled; |
| qcom,panel-roi-alignment = <2 2 2 2 2 2>; |
| }; |