net: bcmgenet: request and enable main clock earlier
bcmgenet_set_hw_params() will read the hardware version and compare it
with the one we are getting from Device Tree. Due to the clock being
enabled too late, bcmgenet_set_hw_params() will cause bus errors since
the GENET hardware block is still gated off by the time
bcmgenet_set_hw_params() is called, this will also make us fail the
version check since we will read the value 0 from the hardware.
Fix this by requesting the clock before the first piece of code that
needs to access hardware register.
Fixes: 1c1008c793fa4 ("net: bcmgenet: add main driver file")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index ce455ae..7a3661c 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -2533,6 +2533,13 @@
priv->pdev = pdev;
priv->version = (enum bcmgenet_version)of_id->data;
+ priv->clk = devm_clk_get(&priv->pdev->dev, "enet");
+ if (IS_ERR(priv->clk))
+ dev_warn(&priv->pdev->dev, "failed to get enet clock\n");
+
+ if (!IS_ERR(priv->clk))
+ clk_prepare_enable(priv->clk);
+
bcmgenet_set_hw_params(priv);
/* Mii wait queue */
@@ -2541,17 +2548,10 @@
priv->rx_buf_len = RX_BUF_LENGTH;
INIT_WORK(&priv->bcmgenet_irq_work, bcmgenet_irq_task);
- priv->clk = devm_clk_get(&priv->pdev->dev, "enet");
- if (IS_ERR(priv->clk))
- dev_warn(&priv->pdev->dev, "failed to get enet clock\n");
-
priv->clk_wol = devm_clk_get(&priv->pdev->dev, "enet-wol");
if (IS_ERR(priv->clk_wol))
dev_warn(&priv->pdev->dev, "failed to get enet-wol clock\n");
- if (!IS_ERR(priv->clk))
- clk_prepare_enable(priv->clk);
-
err = reset_umac(priv);
if (err)
goto err_clk_disable;