Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
[PATCH] WE : Add missing auth compat-ioctl
[PATCH] softmac: Fix inability to associate with WEP networks
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index e477c9d..8a1b001 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -605,6 +605,13 @@
regs->ccr = 0;
regs->gpr[1] = sp;
+ /*
+ * We have just cleared all the nonvolatile GPRs, so make
+ * FULL_REGS(regs) return true. This is necessary to allow
+ * ptrace to examine the thread immediately after exec.
+ */
+ regs->trap &= ~1UL;
+
#ifdef CONFIG_PPC32
regs->mq = 0;
regs->nip = start;
diff --git a/drivers/char/mspec.c b/drivers/char/mspec.c
index 049a46cc9..04ac155 100644
--- a/drivers/char/mspec.c
+++ b/drivers/char/mspec.c
@@ -155,23 +155,22 @@
* mspec_close
*
* Called when unmapping a device mapping. Frees all mspec pages
- * belonging to the vma.
+ * belonging to all the vma's sharing this vma_data structure.
*/
static void
mspec_close(struct vm_area_struct *vma)
{
struct vma_data *vdata;
- int index, last_index, result;
+ int index, last_index;
unsigned long my_page;
vdata = vma->vm_private_data;
- BUG_ON(vma->vm_start < vdata->vm_start || vma->vm_end > vdata->vm_end);
+ if (!atomic_dec_and_test(&vdata->refcnt))
+ return;
- spin_lock(&vdata->lock);
- index = (vma->vm_start - vdata->vm_start) >> PAGE_SHIFT;
- last_index = (vma->vm_end - vdata->vm_start) >> PAGE_SHIFT;
- for (; index < last_index; index++) {
+ last_index = (vdata->vm_end - vdata->vm_start) >> PAGE_SHIFT;
+ for (index = 0; index < last_index; index++) {
if (vdata->maddr[index] == 0)
continue;
/*
@@ -180,20 +179,12 @@
*/
my_page = vdata->maddr[index];
vdata->maddr[index] = 0;
- spin_unlock(&vdata->lock);
- result = mspec_zero_block(my_page, PAGE_SIZE);
- if (!result)
+ if (!mspec_zero_block(my_page, PAGE_SIZE))
uncached_free_page(my_page);
else
printk(KERN_WARNING "mspec_close(): "
- "failed to zero page %i\n",
- result);
- spin_lock(&vdata->lock);
+ "failed to zero page %ld\n", my_page);
}
- spin_unlock(&vdata->lock);
-
- if (!atomic_dec_and_test(&vdata->refcnt))
- return;
if (vdata->flags & VMD_VMALLOCED)
vfree(vdata);
@@ -201,7 +192,6 @@
kfree(vdata);
}
-
/*
* mspec_nopfn
*
diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c
index 2bea1b2..a1804bf 100644
--- a/drivers/input/mouse/appletouch.c
+++ b/drivers/input/mouse/appletouch.c
@@ -328,6 +328,7 @@
{
int x, y, x_z, y_z, x_f, y_f;
int retval, i, j;
+ int key;
struct atp *dev = urb->context;
switch (urb->status) {
@@ -468,6 +469,7 @@
ATP_XFACT, &x_z, &x_f);
y = atp_calculate_abs(dev->xy_acc + ATP_XSENSORS, ATP_YSENSORS,
ATP_YFACT, &y_z, &y_f);
+ key = dev->data[dev->datalen - 1] & 1;
if (x && y) {
if (dev->x_old != -1) {
@@ -505,7 +507,7 @@
the first touch unless reinitialised. Do so if it's been
idle for a while in order to avoid waking the kernel up
several hundred times a second */
- if (atp_is_geyser_3(dev)) {
+ if (!key && atp_is_geyser_3(dev)) {
dev->idlecount++;
if (dev->idlecount == 10) {
dev->valid = 0;
@@ -514,7 +516,7 @@
}
}
- input_report_key(dev->input, BTN_LEFT, dev->data[dev->datalen - 1] & 1);
+ input_report_key(dev->input, BTN_LEFT, key);
input_sync(dev->input);
exit:
diff --git a/drivers/lguest/lguest_asm.S b/drivers/lguest/lguest_asm.S
index f182c6a..1ddcd5c 100644
--- a/drivers/lguest/lguest_asm.S
+++ b/drivers/lguest/lguest_asm.S
@@ -22,8 +22,9 @@
jmp lguest_init
/*G:055 We create a macro which puts the assembler code between lgstart_ and
- * lgend_ markers. These templates end up in the .init.text section, so they
- * are discarded after boot. */
+ * lgend_ markers. These templates are put in the .text section: they can't be
+ * discarded after boot as we may need to patch modules, too. */
+.text
#define LGUEST_PATCH(name, insns...) \
lgstart_##name: insns; lgend_##name:; \
.globl lgstart_##name; .globl lgend_##name
@@ -34,7 +35,6 @@
LGUEST_PATCH(pushf, movl lguest_data+LGUEST_DATA_irq_enabled, %eax)
/*:*/
-.text
/* These demark the EIP range where host should never deliver interrupts. */
.global lguest_noirq_start
.global lguest_noirq_end
diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c
index 6f56f87..4df21c9 100644
--- a/drivers/scsi/scsi_transport_spi.c
+++ b/drivers/scsi/scsi_transport_spi.c
@@ -787,10 +787,12 @@
struct scsi_target *starget = sdev->sdev_target;
struct Scsi_Host *shost = sdev->host;
int len = sdev->inquiry_len;
+ int min_period = spi_min_period(starget);
+ int max_width = spi_max_width(starget);
/* first set us up for narrow async */
DV_SET(offset, 0);
DV_SET(width, 0);
-
+
if (spi_dv_device_compare_inquiry(sdev, buffer, buffer, DV_LOOPS)
!= SPI_COMPARE_SUCCESS) {
starget_printk(KERN_ERR, starget, "Domain Validation Initial Inquiry Failed\n");
@@ -798,9 +800,13 @@
return;
}
+ if (!scsi_device_wide(sdev)) {
+ spi_max_width(starget) = 0;
+ max_width = 0;
+ }
+
/* test width */
- if (i->f->set_width && spi_max_width(starget) &&
- scsi_device_wide(sdev)) {
+ if (i->f->set_width && max_width) {
i->f->set_width(starget, 1);
if (spi_dv_device_compare_inquiry(sdev, buffer,
@@ -809,6 +815,11 @@
!= SPI_COMPARE_SUCCESS) {
starget_printk(KERN_ERR, starget, "Wide Transfers Fail\n");
i->f->set_width(starget, 0);
+ /* Make sure we don't force wide back on by asking
+ * for a transfer period that requires it */
+ max_width = 0;
+ if (min_period < 10)
+ min_period = 10;
}
}
@@ -828,7 +839,8 @@
/* now set up to the maximum */
DV_SET(offset, spi_max_offset(starget));
- DV_SET(period, spi_min_period(starget));
+ DV_SET(period, min_period);
+
/* try QAS requests; this should be harmless to set if the
* target supports it */
if (scsi_device_qas(sdev)) {
@@ -837,14 +849,14 @@
DV_SET(qas, 0);
}
- if (scsi_device_ius(sdev) && spi_min_period(starget) < 9) {
+ if (scsi_device_ius(sdev) && min_period < 9) {
/* This u320 (or u640). Set IU transfers */
DV_SET(iu, 1);
/* Then set the optional parameters */
DV_SET(rd_strm, 1);
DV_SET(wr_flow, 1);
DV_SET(rti, 1);
- if (spi_min_period(starget) == 8)
+ if (min_period == 8)
DV_SET(pcomp_en, 1);
} else {
DV_SET(iu, 0);
@@ -862,6 +874,10 @@
} else {
DV_SET(dt, 1);
}
+ /* set width last because it will pull all the other
+ * parameters down to required values */
+ DV_SET(width, max_width);
+
/* Do the read only INQUIRY tests */
spi_dv_retrain(sdev, buffer, buffer + sdev->inquiry_len,
spi_dv_device_compare_inquiry);
diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c
index 8d7ab74..a593f90 100644
--- a/drivers/w1/w1.c
+++ b/drivers/w1/w1.c
@@ -431,6 +431,7 @@
err = add_uevent_var(envp, num_envp, &cur_index, buffer, buffer_size,
&cur_len, "W1_SLAVE_ID=%024LX",
(unsigned long long)sl->reg_num.id);
+ envp[cur_index] = NULL;
if (err)
return err;
diff --git a/fs/ufs/super.c b/fs/ufs/super.c
index 73402c5..38eb0b7 100644
--- a/fs/ufs/super.c
+++ b/fs/ufs/super.c
@@ -894,7 +894,7 @@
goto again;
}
-
+ sbi->s_flags = flags;/*after that line some functions use s_flags*/
ufs_print_super_stuff(sb, usb1, usb2, usb3);
/*
@@ -1025,8 +1025,6 @@
UFS_MOUNT_UFSTYPE_44BSD)
uspi->s_maxsymlinklen =
fs32_to_cpu(sb, usb3->fs_un2.fs_44.fs_maxsymlinklen);
-
- sbi->s_flags = flags;
inode = iget(sb, UFS_ROOTINO);
if (!inode || is_bad_inode(inode))
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 50a94eee..495863a 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -284,7 +284,7 @@
select KALLSYMS_ALL
config LOCK_STAT
- bool "Lock usage statisitics"
+ bool "Lock usage statistics"
depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
select LOCKDEP
select DEBUG_SPINLOCK