spi: spi-pxa2xx: SPI support for Intel Quark X1000
There are two SPI controllers exported by PCI subsystem for Intel Quark X1000.
The SPI memory mapped I/O registers supported by Quark are different from
the current implementation, and Quark only supports the registers of 'SSCR0',
'SSCR1', 'SSSR', 'SSDR', and 'DDS_RATE'. This patch is to enable the SPI for
Intel Quark X1000.
This piece of work is derived from Dan O'Donovan's initial work for Intel Quark
X1000 SPI enabling.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Weike Chen <alvin.chen@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c
index 6beee8c..fa7399e 100644
--- a/drivers/spi/spi-pxa2xx-pci.c
+++ b/drivers/spi/spi-pxa2xx-pci.c
@@ -19,6 +19,7 @@
PORT_BSW0,
PORT_BSW1,
PORT_BSW2,
+ PORT_QUARK_X1000,
};
struct pxa_spi_info {
@@ -92,6 +93,12 @@
.tx_param = &bsw2_tx_param,
.rx_param = &bsw2_rx_param,
},
+ [PORT_QUARK_X1000] = {
+ .type = QUARK_X1000_SSP,
+ .port_id = -1,
+ .num_chipselect = 1,
+ .max_clk_rate = 50000000,
+ },
};
static int pxa2xx_spi_pci_probe(struct pci_dev *dev,
@@ -191,6 +198,7 @@
static const struct pci_device_id pxa2xx_spi_pci_devices[] = {
{ PCI_VDEVICE(INTEL, 0x2e6a), PORT_CE4100 },
+ { PCI_VDEVICE(INTEL, 0x0935), PORT_QUARK_X1000 },
{ PCI_VDEVICE(INTEL, 0x0f0e), PORT_BYT },
{ PCI_VDEVICE(INTEL, 0x228e), PORT_BSW0 },
{ PCI_VDEVICE(INTEL, 0x2290), PORT_BSW1 },