drivers/usb/host/xhci-plat.c - kernel/msm-4.9 - Gitiles

 /*
  * xhci-plat.c - xHCI host controller driver platform Bus Glue.
  *
  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
  * Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
  *
  * A lot of code borrowed from the Linux xHCI driver.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * version 2 as published by the Free Software Foundation.
  */

 #include <linux/clk.h>
 #include <linux/dma-mapping.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/usb/xhci_pdriver.h>

 #include "xhci.h"
 #include "xhci-mvebu.h"
 #include "xhci-rcar.h"

 static struct hc_driver __read_mostly xhci_plat_hc_driver;

 static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
 {
 	/*
 	 * As of now platform drivers don't provide MSI support so we ensure
 	 * here that the generic code does not try to make a pci_dev from our
 	 * dev struct in order to setup MSI
 	 */
 	xhci->quirks |= XHCI_PLAT;
 }

 /* called during probe() after chip reset completes */
 static int xhci_plat_setup(struct usb_hcd *hcd)
 {
 	struct device_node *of_node = hcd->self.controller->of_node;
 	int ret;

 	if (of_device_is_compatible(of_node, "renesas,xhci-r8a7790") ||
 	    of_device_is_compatible(of_node, "renesas,xhci-r8a7791")) {
 		ret = xhci_rcar_init_quirk(hcd);
 		if (ret)
 			return ret;
 	}

 	return xhci_gen_setup(hcd, xhci_plat_quirks);
 }

 static int xhci_plat_start(struct usb_hcd *hcd)
 {
 	struct device_node *of_node = hcd->self.controller->of_node;

 	if (of_device_is_compatible(of_node, "renesas,xhci-r8a7790") ||
 	    of_device_is_compatible(of_node, "renesas,xhci-r8a7791"))
 		xhci_rcar_start(hcd);

 	return xhci_run(hcd);
 }

 static int xhci_plat_probe(struct platform_device *pdev)
 {
 	struct device_node	*node = pdev->dev.of_node;
 	struct usb_xhci_pdata	*pdata = dev_get_platdata(&pdev->dev);
 	const struct hc_driver	*driver;
 	struct xhci_hcd		*xhci;
 	struct resource         *res;
 	struct usb_hcd		*hcd;
 	struct clk              *clk;
 	int			ret;
 	int			irq;

 	if (usb_disabled())
 		return -ENODEV;

 	driver = &xhci_plat_hc_driver;

 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
 		return -ENODEV;

 	/* Initialize dma_mask and coherent_dma_mask to 32-bits */
 	ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
 	if (ret)
 		return ret;
 	if (!pdev->dev.dma_mask)
 		pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
 	else
 		dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));

 	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
 	if (!hcd)
 		return -ENOMEM;

 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	hcd->regs = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(hcd->regs)) {
 		ret = PTR_ERR(hcd->regs);
 		goto put_hcd;
 	}

 	hcd->rsrc_start = res->start;
 	hcd->rsrc_len = resource_size(res);

 	/*
 	 * Not all platforms have a clk so it is not an error if the
 	 * clock does not exists.
 	 */
 	clk = devm_clk_get(&pdev->dev, NULL);
 	if (!IS_ERR(clk)) {
 		ret = clk_prepare_enable(clk);
 		if (ret)
 			goto put_hcd;
 	}

 	if (of_device_is_compatible(pdev->dev.of_node,
 				    "marvell,armada-375-xhci") ||
 	    of_device_is_compatible(pdev->dev.of_node,
 				    "marvell,armada-380-xhci")) {
 		ret = xhci_mvebu_mbus_init_quirk(pdev);
 		if (ret)
 			goto disable_clk;
 	}

 	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (ret)
 		goto disable_clk;

 	device_wakeup_enable(hcd->self.controller);

 	/* USB 2.0 roothub is stored in the platform_device now. */
 	hcd = platform_get_drvdata(pdev);
 	xhci = hcd_to_xhci(hcd);
 	xhci->clk = clk;
 	xhci->shared_hcd = usb_create_shared_hcd(driver, &pdev->dev,
 			dev_name(&pdev->dev), hcd);
 	if (!xhci->shared_hcd) {
 		ret = -ENOMEM;
 		goto dealloc_usb2_hcd;
 	}

 	if ((node && of_property_read_bool(node, "usb3-lpm-capable")) ||
 			(pdata && pdata->usb3_lpm_capable))
 		xhci->quirks |= XHCI_LPM_SUPPORT;
 	/*
 	 * Set the xHCI pointer before xhci_plat_setup() (aka hcd_driver.reset)
 	 * is called by usb_add_hcd().
 	 */
 	*((struct xhci_hcd **) xhci->shared_hcd->hcd_priv) = xhci;

 	if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
 		xhci->shared_hcd->can_do_streams = 1;

 	ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
 	if (ret)
 		goto put_usb3_hcd;

 	return 0;

 put_usb3_hcd:
 	usb_put_hcd(xhci->shared_hcd);

 dealloc_usb2_hcd:
 	usb_remove_hcd(hcd);

 disable_clk:
 	if (!IS_ERR(clk))
 		clk_disable_unprepare(clk);

 put_hcd:
 	usb_put_hcd(hcd);

 	return ret;
 }

 static int xhci_plat_remove(struct platform_device *dev)
 {
 	struct usb_hcd	*hcd = platform_get_drvdata(dev);
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
 	struct clk *clk = xhci->clk;

 	usb_remove_hcd(xhci->shared_hcd);
 	usb_put_hcd(xhci->shared_hcd);

 	usb_remove_hcd(hcd);
 	if (!IS_ERR(clk))
 		clk_disable_unprepare(clk);
 	usb_put_hcd(hcd);
 	kfree(xhci);

 	return 0;
 }

 #ifdef CONFIG_PM_SLEEP
 static int xhci_plat_suspend(struct device *dev)
 {
 	struct usb_hcd	*hcd = dev_get_drvdata(dev);
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);

 	/*
 	 * xhci_suspend() needs `do_wakeup` to know whether host is allowed
 	 * to do wakeup during suspend. Since xhci_plat_suspend is currently
 	 * only designed for system suspend, device_may_wakeup() is enough
 	 * to dertermine whether host is allowed to do wakeup. Need to
 	 * reconsider this when xhci_plat_suspend enlarges its scope, e.g.,
 	 * also applies to runtime suspend.
 	 */
 	return xhci_suspend(xhci, device_may_wakeup(dev));
 }

 static int xhci_plat_resume(struct device *dev)
 {
 	struct usb_hcd	*hcd = dev_get_drvdata(dev);
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);

 	return xhci_resume(xhci, 0);
 }

 static const struct dev_pm_ops xhci_plat_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume)
 };
 #define DEV_PM_OPS	(&xhci_plat_pm_ops)
 #else
 #define DEV_PM_OPS	NULL
 #endif /* CONFIG_PM */

 #ifdef CONFIG_OF
 static const struct of_device_id usb_xhci_of_match[] = {
 	{ .compatible = "generic-xhci" },
 	{ .compatible = "xhci-platform" },
 	{ .compatible = "marvell,armada-375-xhci"},
 	{ .compatible = "marvell,armada-380-xhci"},
 	{ .compatible = "renesas,xhci-r8a7790"},
 	{ .compatible = "renesas,xhci-r8a7791"},
 	{ },
 };
 MODULE_DEVICE_TABLE(of, usb_xhci_of_match);
 #endif

 static struct platform_driver usb_xhci_driver = {
 	.probe	= xhci_plat_probe,
 	.remove	= xhci_plat_remove,
 	.driver	= {
 		.name = "xhci-hcd",
 		.pm = DEV_PM_OPS,
 		.of_match_table = of_match_ptr(usb_xhci_of_match),
 	},
 };
 MODULE_ALIAS("platform:xhci-hcd");

 static int __init xhci_plat_init(void)
 {
 	xhci_init_driver(&xhci_plat_hc_driver, xhci_plat_setup);
 	xhci_plat_hc_driver.start = xhci_plat_start;
 	return platform_driver_register(&usb_xhci_driver);
 }
 module_init(xhci_plat_init);

 static void __exit xhci_plat_exit(void)
 {
 	platform_driver_unregister(&usb_xhci_driver);
 }
 module_exit(xhci_plat_exit);

 MODULE_DESCRIPTION("xHCI Platform Host Controller Driver");
 MODULE_LICENSE("GPL");
	/*
	* xhci-plat.c - xHCI host controller driver platform Bus Glue.
	*
	* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
	* Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
	*
	* A lot of code borrowed from the Linux xHCI driver.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License
	* version 2 as published by the Free Software Foundation.
	*/

	#include <linux/clk.h>
	#include <linux/dma-mapping.h>
	#include <linux/module.h>
	#include <linux/of.h>
	#include <linux/platform_device.h>
	#include <linux/slab.h>
	#include <linux/usb/xhci_pdriver.h>

	#include "xhci.h"
	#include "xhci-mvebu.h"
	#include "xhci-rcar.h"

	static struct hc_driver __read_mostly xhci_plat_hc_driver;

	static void xhci_plat_quirks(struct device dev, struct xhci_hcd xhci)
	{
	/*
	* As of now platform drivers don't provide MSI support so we ensure
	* here that the generic code does not try to make a pci_dev from our
	* dev struct in order to setup MSI
	*/
	xhci->quirks \|= XHCI_PLAT;
	}

	/* called during probe() after chip reset completes */
	static int xhci_plat_setup(struct usb_hcd *hcd)
	{
	struct device_node *of_node = hcd->self.controller->of_node;
	int ret;

	if (of_device_is_compatible(of_node, "renesas,xhci-r8a7790") \|\|
	of_device_is_compatible(of_node, "renesas,xhci-r8a7791")) {
	ret = xhci_rcar_init_quirk(hcd);
	if (ret)
	return ret;
	}

	return xhci_gen_setup(hcd, xhci_plat_quirks);
	}

	static int xhci_plat_start(struct usb_hcd *hcd)
	{
	struct device_node *of_node = hcd->self.controller->of_node;

	if (of_device_is_compatible(of_node, "renesas,xhci-r8a7790") \|\|
	of_device_is_compatible(of_node, "renesas,xhci-r8a7791"))
	xhci_rcar_start(hcd);

	return xhci_run(hcd);
	}

	static int xhci_plat_probe(struct platform_device *pdev)
	{
	struct device_node *node = pdev->dev.of_node;
	struct usb_xhci_pdata *pdata = dev_get_platdata(&pdev->dev);
	const struct hc_driver *driver;
	struct xhci_hcd *xhci;
	struct resource *res;
	struct usb_hcd *hcd;
	struct clk *clk;
	int ret;
	int irq;

	if (usb_disabled())
	return -ENODEV;

	driver = &xhci_plat_hc_driver;

	irq = platform_get_irq(pdev, 0);
	if (irq < 0)
	return -ENODEV;

	/* Initialize dma_mask and coherent_dma_mask to 32-bits */
	ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
	if (ret)
	return ret;
	if (!pdev->dev.dma_mask)
	pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
	else
	dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));

	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
	if (!hcd)
	return -ENOMEM;

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	hcd->regs = devm_ioremap_resource(&pdev->dev, res);
	if (IS_ERR(hcd->regs)) {
	ret = PTR_ERR(hcd->regs);
	goto put_hcd;
	}

	hcd->rsrc_start = res->start;
	hcd->rsrc_len = resource_size(res);

	/*
	* Not all platforms have a clk so it is not an error if the
	* clock does not exists.
	*/
	clk = devm_clk_get(&pdev->dev, NULL);
	if (!IS_ERR(clk)) {
	ret = clk_prepare_enable(clk);
	if (ret)
	goto put_hcd;
	}

	if (of_device_is_compatible(pdev->dev.of_node,
	"marvell,armada-375-xhci") \|\|
	of_device_is_compatible(pdev->dev.of_node,
	"marvell,armada-380-xhci")) {
	ret = xhci_mvebu_mbus_init_quirk(pdev);
	if (ret)
	goto disable_clk;
	}

	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
	if (ret)
	goto disable_clk;

	device_wakeup_enable(hcd->self.controller);

	/* USB 2.0 roothub is stored in the platform_device now. */
	hcd = platform_get_drvdata(pdev);
	xhci = hcd_to_xhci(hcd);
	xhci->clk = clk;
	xhci->shared_hcd = usb_create_shared_hcd(driver, &pdev->dev,
	dev_name(&pdev->dev), hcd);
	if (!xhci->shared_hcd) {
	ret = -ENOMEM;
	goto dealloc_usb2_hcd;
	}

	if ((node && of_property_read_bool(node, "usb3-lpm-capable")) \|\|
	(pdata && pdata->usb3_lpm_capable))
	xhci->quirks \|= XHCI_LPM_SUPPORT;
	/*
	* Set the xHCI pointer before xhci_plat_setup() (aka hcd_driver.reset)
	* is called by usb_add_hcd().
	*/
	((struct xhci_hcd *) xhci->shared_hcd->hcd_priv) = xhci;

	if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
	xhci->shared_hcd->can_do_streams = 1;

	ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
	if (ret)
	goto put_usb3_hcd;

	return 0;

	put_usb3_hcd:
	usb_put_hcd(xhci->shared_hcd);

	dealloc_usb2_hcd:
	usb_remove_hcd(hcd);

	disable_clk:
	if (!IS_ERR(clk))
	clk_disable_unprepare(clk);

	put_hcd:
	usb_put_hcd(hcd);

	return ret;
	}

	static int xhci_plat_remove(struct platform_device *dev)
	{
	struct usb_hcd *hcd = platform_get_drvdata(dev);
	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
	struct clk *clk = xhci->clk;

	usb_remove_hcd(xhci->shared_hcd);
	usb_put_hcd(xhci->shared_hcd);

	usb_remove_hcd(hcd);
	if (!IS_ERR(clk))
	clk_disable_unprepare(clk);
	usb_put_hcd(hcd);
	kfree(xhci);

	return 0;
	}

	#ifdef CONFIG_PM_SLEEP
	static int xhci_plat_suspend(struct device *dev)
	{
	struct usb_hcd *hcd = dev_get_drvdata(dev);
	struct xhci_hcd *xhci = hcd_to_xhci(hcd);

	/*
	* xhci_suspend() needs `do_wakeup` to know whether host is allowed
	* to do wakeup during suspend. Since xhci_plat_suspend is currently
	* only designed for system suspend, device_may_wakeup() is enough
	* to dertermine whether host is allowed to do wakeup. Need to
	* reconsider this when xhci_plat_suspend enlarges its scope, e.g.,
	* also applies to runtime suspend.
	*/
	return xhci_suspend(xhci, device_may_wakeup(dev));
	}

	static int xhci_plat_resume(struct device *dev)
	{
	struct usb_hcd *hcd = dev_get_drvdata(dev);
	struct xhci_hcd *xhci = hcd_to_xhci(hcd);

	return xhci_resume(xhci, 0);
	}

	static const struct dev_pm_ops xhci_plat_pm_ops = {
	SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume)
	};
	#define DEV_PM_OPS (&xhci_plat_pm_ops)
	#else
	#define DEV_PM_OPS NULL
	#endif /* CONFIG_PM */

	#ifdef CONFIG_OF
	static const struct of_device_id usb_xhci_of_match[] = {
	{ .compatible = "generic-xhci" },
	{ .compatible = "xhci-platform" },
	{ .compatible = "marvell,armada-375-xhci"},
	{ .compatible = "marvell,armada-380-xhci"},
	{ .compatible = "renesas,xhci-r8a7790"},
	{ .compatible = "renesas,xhci-r8a7791"},
	{ },
	};
	MODULE_DEVICE_TABLE(of, usb_xhci_of_match);
	#endif

	static struct platform_driver usb_xhci_driver = {
	.probe = xhci_plat_probe,
	.remove = xhci_plat_remove,
	.driver = {
	.name = "xhci-hcd",
	.pm = DEV_PM_OPS,
	.of_match_table = of_match_ptr(usb_xhci_of_match),
	},
	};
	MODULE_ALIAS("platform:xhci-hcd");

	static int __init xhci_plat_init(void)
	{
	xhci_init_driver(&xhci_plat_hc_driver, xhci_plat_setup);
	xhci_plat_hc_driver.start = xhci_plat_start;
	return platform_driver_register(&usb_xhci_driver);
	}
	module_init(xhci_plat_init);

	static void __exit xhci_plat_exit(void)
	{
	platform_driver_unregister(&usb_xhci_driver);
	}
	module_exit(xhci_plat_exit);

	MODULE_DESCRIPTION("xHCI Platform Host Controller Driver");
	MODULE_LICENSE("GPL");