| /* |
| * Copyright (c) 2010 Broadcom Corporation |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY |
| * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION |
| * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN |
| * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| #include <linux/types.h> |
| #include <net/cfg80211.h> |
| #include <net/mac80211.h> |
| #include <net/regulatory.h> |
| |
| #include <defs.h> |
| #include "pub.h" |
| #include "phy/phy_hal.h" |
| #include "main.h" |
| #include "stf.h" |
| #include "channel.h" |
| #include "mac80211_if.h" |
| |
| /* QDB() macro takes a dB value and converts to a quarter dB value */ |
| #define QDB(n) ((n) * BRCMS_TXPWR_DB_FACTOR) |
| |
| #define LOCALE_MIMO_IDX_bn 0 |
| #define LOCALE_MIMO_IDX_11n 0 |
| |
| /* max of BAND_5G_PWR_LVLS and 14 for 2.4 GHz */ |
| #define BRCMS_MAXPWR_MIMO_TBL_SIZE 14 |
| |
| /* maxpwr mapping to 5GHz band channels: |
| * maxpwr[0] - channels [34-48] |
| * maxpwr[1] - channels [52-60] |
| * maxpwr[2] - channels [62-64] |
| * maxpwr[3] - channels [100-140] |
| * maxpwr[4] - channels [149-165] |
| */ |
| #define BAND_5G_PWR_LVLS 5 /* 5 power levels for 5G */ |
| |
| #define LC(id) LOCALE_MIMO_IDX_ ## id |
| |
| #define LOCALES(mimo2, mimo5) \ |
| {LC(mimo2), LC(mimo5)} |
| |
| /* macro to get 5 GHz channel group index for tx power */ |
| #define CHANNEL_POWER_IDX_5G(c) (((c) < 52) ? 0 : \ |
| (((c) < 62) ? 1 : \ |
| (((c) < 100) ? 2 : \ |
| (((c) < 149) ? 3 : 4)))) |
| |
| #define BRCM_2GHZ_2412_2462 REG_RULE(2412-10, 2462+10, 40, 0, 19, 0) |
| #define BRCM_2GHZ_2467_2472 REG_RULE(2467-10, 2472+10, 20, 0, 19, \ |
| NL80211_RRF_PASSIVE_SCAN | \ |
| NL80211_RRF_NO_IBSS) |
| |
| #define BRCM_5GHZ_5180_5240 REG_RULE(5180-10, 5240+10, 40, 0, 21, \ |
| NL80211_RRF_PASSIVE_SCAN | \ |
| NL80211_RRF_NO_IBSS) |
| #define BRCM_5GHZ_5260_5320 REG_RULE(5260-10, 5320+10, 40, 0, 21, \ |
| NL80211_RRF_PASSIVE_SCAN | \ |
| NL80211_RRF_DFS | \ |
| NL80211_RRF_NO_IBSS) |
| #define BRCM_5GHZ_5500_5700 REG_RULE(5500-10, 5700+10, 40, 0, 21, \ |
| NL80211_RRF_PASSIVE_SCAN | \ |
| NL80211_RRF_DFS | \ |
| NL80211_RRF_NO_IBSS) |
| #define BRCM_5GHZ_5745_5825 REG_RULE(5745-10, 5825+10, 40, 0, 21, \ |
| NL80211_RRF_PASSIVE_SCAN | \ |
| NL80211_RRF_NO_IBSS) |
| |
| static const struct ieee80211_regdomain brcms_regdom_x2 = { |
| .n_reg_rules = 6, |
| .alpha2 = "X2", |
| .reg_rules = { |
| BRCM_2GHZ_2412_2462, |
| BRCM_2GHZ_2467_2472, |
| BRCM_5GHZ_5180_5240, |
| BRCM_5GHZ_5260_5320, |
| BRCM_5GHZ_5500_5700, |
| BRCM_5GHZ_5745_5825, |
| } |
| }; |
| |
| /* locale per-channel tx power limits for MIMO frames |
| * maxpwr arrays are index by channel for 2.4 GHz limits, and |
| * by sub-band for 5 GHz limits using CHANNEL_POWER_IDX_5G(channel) |
| */ |
| struct locale_mimo_info { |
| /* tx 20 MHz power limits, qdBm units */ |
| s8 maxpwr20[BRCMS_MAXPWR_MIMO_TBL_SIZE]; |
| /* tx 40 MHz power limits, qdBm units */ |
| s8 maxpwr40[BRCMS_MAXPWR_MIMO_TBL_SIZE]; |
| }; |
| |
| /* Country names and abbreviations with locale defined from ISO 3166 */ |
| struct country_info { |
| const u8 locale_mimo_2G; /* 2.4G mimo info */ |
| const u8 locale_mimo_5G; /* 5G mimo info */ |
| }; |
| |
| struct brcms_regd { |
| struct country_info country; |
| const struct ieee80211_regdomain *regdomain; |
| }; |
| |
| struct brcms_cm_info { |
| struct brcms_pub *pub; |
| struct brcms_c_info *wlc; |
| const struct brcms_regd *world_regd; |
| }; |
| |
| /* |
| * MIMO Locale Definitions - 2.4 GHz |
| */ |
| static const struct locale_mimo_info locale_bn = { |
| {QDB(13), QDB(13), QDB(13), QDB(13), QDB(13), |
| QDB(13), QDB(13), QDB(13), QDB(13), QDB(13), |
| QDB(13), QDB(13), QDB(13)}, |
| {0, 0, QDB(13), QDB(13), QDB(13), |
| QDB(13), QDB(13), QDB(13), QDB(13), QDB(13), |
| QDB(13), 0, 0}, |
| }; |
| |
| static const struct locale_mimo_info *g_mimo_2g_table[] = { |
| &locale_bn |
| }; |
| |
| /* |
| * MIMO Locale Definitions - 5 GHz |
| */ |
| static const struct locale_mimo_info locale_11n = { |
| { /* 12.5 dBm */ 50, 50, 50, QDB(15), QDB(15)}, |
| {QDB(14), QDB(15), QDB(15), QDB(15), QDB(15)}, |
| }; |
| |
| static const struct locale_mimo_info *g_mimo_5g_table[] = { |
| &locale_11n |
| }; |
| |
| static const struct brcms_regd cntry_locales[] = { |
| /* Worldwide RoW 2, must always be at index 0 */ |
| { |
| .country = LOCALES(bn, 11n), |
| .regdomain = &brcms_regdom_x2, |
| }, |
| }; |
| |
| static const struct locale_mimo_info *brcms_c_get_mimo_2g(u8 locale_idx) |
| { |
| if (locale_idx >= ARRAY_SIZE(g_mimo_2g_table)) |
| return NULL; |
| |
| return g_mimo_2g_table[locale_idx]; |
| } |
| |
| static const struct locale_mimo_info *brcms_c_get_mimo_5g(u8 locale_idx) |
| { |
| if (locale_idx >= ARRAY_SIZE(g_mimo_5g_table)) |
| return NULL; |
| |
| return g_mimo_5g_table[locale_idx]; |
| } |
| |
| /* |
| * Indicates whether the country provided is valid to pass |
| * to cfg80211 or not. |
| * |
| * returns true if valid; false if not. |
| */ |
| static bool brcms_c_country_valid(const char *ccode) |
| { |
| /* |
| * only allow ascii alpha uppercase for the first 2 |
| * chars. |
| */ |
| if (!((0x80 & ccode[0]) == 0 && ccode[0] >= 0x41 && ccode[0] <= 0x5A && |
| (0x80 & ccode[1]) == 0 && ccode[1] >= 0x41 && ccode[1] <= 0x5A && |
| ccode[2] == '\0')) |
| return false; |
| |
| /* |
| * do not match ISO 3166-1 user assigned country codes |
| * that may be in the driver table |
| */ |
| if (!strcmp("AA", ccode) || /* AA */ |
| !strcmp("ZZ", ccode) || /* ZZ */ |
| ccode[0] == 'X' || /* XA - XZ */ |
| (ccode[0] == 'Q' && /* QM - QZ */ |
| (ccode[1] >= 'M' && ccode[1] <= 'Z'))) |
| return false; |
| |
| if (!strcmp("NA", ccode)) |
| return false; |
| |
| return true; |
| } |
| |
| static const struct brcms_regd *brcms_world_regd(const char *regdom, int len) |
| { |
| const struct brcms_regd *regd = NULL; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(cntry_locales); i++) { |
| if (!strncmp(regdom, cntry_locales[i].regdomain->alpha2, len)) { |
| regd = &cntry_locales[i]; |
| break; |
| } |
| } |
| |
| return regd; |
| } |
| |
| static const struct brcms_regd *brcms_default_world_regd(void) |
| { |
| return &cntry_locales[0]; |
| } |
| |
| /* JP, J1 - J10 are Japan ccodes */ |
| static bool brcms_c_japan_ccode(const char *ccode) |
| { |
| return (ccode[0] == 'J' && |
| (ccode[1] == 'P' || (ccode[1] >= '1' && ccode[1] <= '9'))); |
| } |
| |
| static void |
| brcms_c_channel_min_txpower_limits_with_local_constraint( |
| struct brcms_cm_info *wlc_cm, struct txpwr_limits *txpwr, |
| u8 local_constraint_qdbm) |
| { |
| int j; |
| |
| /* CCK Rates */ |
| for (j = 0; j < WL_TX_POWER_CCK_NUM; j++) |
| txpwr->cck[j] = min(txpwr->cck[j], local_constraint_qdbm); |
| |
| /* 20 MHz Legacy OFDM SISO */ |
| for (j = 0; j < WL_TX_POWER_OFDM_NUM; j++) |
| txpwr->ofdm[j] = min(txpwr->ofdm[j], local_constraint_qdbm); |
| |
| /* 20 MHz Legacy OFDM CDD */ |
| for (j = 0; j < BRCMS_NUM_RATES_OFDM; j++) |
| txpwr->ofdm_cdd[j] = |
| min(txpwr->ofdm_cdd[j], local_constraint_qdbm); |
| |
| /* 40 MHz Legacy OFDM SISO */ |
| for (j = 0; j < BRCMS_NUM_RATES_OFDM; j++) |
| txpwr->ofdm_40_siso[j] = |
| min(txpwr->ofdm_40_siso[j], local_constraint_qdbm); |
| |
| /* 40 MHz Legacy OFDM CDD */ |
| for (j = 0; j < BRCMS_NUM_RATES_OFDM; j++) |
| txpwr->ofdm_40_cdd[j] = |
| min(txpwr->ofdm_40_cdd[j], local_constraint_qdbm); |
| |
| /* 20MHz MCS 0-7 SISO */ |
| for (j = 0; j < BRCMS_NUM_RATES_MCS_1_STREAM; j++) |
| txpwr->mcs_20_siso[j] = |
| min(txpwr->mcs_20_siso[j], local_constraint_qdbm); |
| |
| /* 20MHz MCS 0-7 CDD */ |
| for (j = 0; j < BRCMS_NUM_RATES_MCS_1_STREAM; j++) |
| txpwr->mcs_20_cdd[j] = |
| min(txpwr->mcs_20_cdd[j], local_constraint_qdbm); |
| |
| /* 20MHz MCS 0-7 STBC */ |
| for (j = 0; j < BRCMS_NUM_RATES_MCS_1_STREAM; j++) |
| txpwr->mcs_20_stbc[j] = |
| min(txpwr->mcs_20_stbc[j], local_constraint_qdbm); |
| |
| /* 20MHz MCS 8-15 MIMO */ |
| for (j = 0; j < BRCMS_NUM_RATES_MCS_2_STREAM; j++) |
| txpwr->mcs_20_mimo[j] = |
| min(txpwr->mcs_20_mimo[j], local_constraint_qdbm); |
| |
| /* 40MHz MCS 0-7 SISO */ |
| for (j = 0; j < BRCMS_NUM_RATES_MCS_1_STREAM; j++) |
| txpwr->mcs_40_siso[j] = |
| min(txpwr->mcs_40_siso[j], local_constraint_qdbm); |
| |
| /* 40MHz MCS 0-7 CDD */ |
| for (j = 0; j < BRCMS_NUM_RATES_MCS_1_STREAM; j++) |
| txpwr->mcs_40_cdd[j] = |
| min(txpwr->mcs_40_cdd[j], local_constraint_qdbm); |
| |
| /* 40MHz MCS 0-7 STBC */ |
| for (j = 0; j < BRCMS_NUM_RATES_MCS_1_STREAM; j++) |
| txpwr->mcs_40_stbc[j] = |
| min(txpwr->mcs_40_stbc[j], local_constraint_qdbm); |
| |
| /* 40MHz MCS 8-15 MIMO */ |
| for (j = 0; j < BRCMS_NUM_RATES_MCS_2_STREAM; j++) |
| txpwr->mcs_40_mimo[j] = |
| min(txpwr->mcs_40_mimo[j], local_constraint_qdbm); |
| |
| /* 40MHz MCS 32 */ |
| txpwr->mcs32 = min(txpwr->mcs32, local_constraint_qdbm); |
| |
| } |
| |
| /* |
| * set the driver's current country and regulatory information |
| * using a country code as the source. Look up built in country |
| * information found with the country code. |
| */ |
| static void |
| brcms_c_set_country(struct brcms_cm_info *wlc_cm, |
| const struct brcms_regd *regd) |
| { |
| struct brcms_c_info *wlc = wlc_cm->wlc; |
| |
| if ((wlc->pub->_n_enab & SUPPORT_11N) != |
| wlc->protection->nmode_user) |
| brcms_c_set_nmode(wlc); |
| |
| brcms_c_stf_ss_update(wlc, wlc->bandstate[BAND_2G_INDEX]); |
| brcms_c_stf_ss_update(wlc, wlc->bandstate[BAND_5G_INDEX]); |
| |
| brcms_c_set_gmode(wlc, wlc->protection->gmode_user, false); |
| |
| return; |
| } |
| |
| struct brcms_cm_info *brcms_c_channel_mgr_attach(struct brcms_c_info *wlc) |
| { |
| struct brcms_cm_info *wlc_cm; |
| struct brcms_pub *pub = wlc->pub; |
| struct ssb_sprom *sprom = &wlc->hw->d11core->bus->sprom; |
| const char *ccode = sprom->alpha2; |
| int ccode_len = sizeof(sprom->alpha2); |
| |
| BCMMSG(wlc->wiphy, "wl%d\n", wlc->pub->unit); |
| |
| wlc_cm = kzalloc(sizeof(struct brcms_cm_info), GFP_ATOMIC); |
| if (wlc_cm == NULL) |
| return NULL; |
| wlc_cm->pub = pub; |
| wlc_cm->wlc = wlc; |
| wlc->cmi = wlc_cm; |
| |
| /* store the country code for passing up as a regulatory hint */ |
| wlc_cm->world_regd = brcms_world_regd(ccode, ccode_len); |
| if (brcms_c_country_valid(ccode)) |
| strncpy(wlc->pub->srom_ccode, ccode, ccode_len); |
| |
| /* |
| * If no custom world domain is found in the SROM, use the |
| * default "X2" domain. |
| */ |
| if (!wlc_cm->world_regd) { |
| wlc_cm->world_regd = brcms_default_world_regd(); |
| ccode = wlc_cm->world_regd->regdomain->alpha2; |
| ccode_len = BRCM_CNTRY_BUF_SZ - 1; |
| } |
| |
| /* save default country for exiting 11d regulatory mode */ |
| strncpy(wlc->country_default, ccode, ccode_len); |
| |
| /* initialize autocountry_default to driver default */ |
| strncpy(wlc->autocountry_default, ccode, ccode_len); |
| |
| brcms_c_set_country(wlc_cm, wlc_cm->world_regd); |
| |
| return wlc_cm; |
| } |
| |
| void brcms_c_channel_mgr_detach(struct brcms_cm_info *wlc_cm) |
| { |
| kfree(wlc_cm); |
| } |
| |
| void |
| brcms_c_channel_set_chanspec(struct brcms_cm_info *wlc_cm, u16 chanspec, |
| u8 local_constraint_qdbm) |
| { |
| struct brcms_c_info *wlc = wlc_cm->wlc; |
| struct ieee80211_channel *ch = wlc->pub->ieee_hw->conf.channel; |
| struct txpwr_limits txpwr; |
| |
| brcms_c_channel_reg_limits(wlc_cm, chanspec, &txpwr); |
| |
| brcms_c_channel_min_txpower_limits_with_local_constraint( |
| wlc_cm, &txpwr, local_constraint_qdbm |
| ); |
| |
| /* set or restore gmode as required by regulatory */ |
| if (ch->flags & IEEE80211_CHAN_NO_OFDM) |
| brcms_c_set_gmode(wlc, GMODE_LEGACY_B, false); |
| else |
| brcms_c_set_gmode(wlc, wlc->protection->gmode_user, false); |
| |
| brcms_b_set_chanspec(wlc->hw, chanspec, |
| !!(ch->flags & IEEE80211_CHAN_PASSIVE_SCAN), |
| &txpwr); |
| } |
| |
| void |
| brcms_c_channel_reg_limits(struct brcms_cm_info *wlc_cm, u16 chanspec, |
| struct txpwr_limits *txpwr) |
| { |
| struct brcms_c_info *wlc = wlc_cm->wlc; |
| struct ieee80211_channel *ch = wlc->pub->ieee_hw->conf.channel; |
| uint i; |
| uint chan; |
| int maxpwr; |
| int delta; |
| const struct country_info *country; |
| struct brcms_band *band; |
| int conducted_max = BRCMS_TXPWR_MAX; |
| const struct locale_mimo_info *li_mimo; |
| int maxpwr20, maxpwr40; |
| int maxpwr_idx; |
| uint j; |
| |
| memset(txpwr, 0, sizeof(struct txpwr_limits)); |
| |
| if (WARN_ON(!ch)) |
| return; |
| |
| country = &wlc_cm->world_regd->country; |
| |
| chan = CHSPEC_CHANNEL(chanspec); |
| band = wlc->bandstate[chspec_bandunit(chanspec)]; |
| li_mimo = (band->bandtype == BRCM_BAND_5G) ? |
| brcms_c_get_mimo_5g(country->locale_mimo_5G) : |
| brcms_c_get_mimo_2g(country->locale_mimo_2G); |
| |
| delta = band->antgain; |
| |
| if (band->bandtype == BRCM_BAND_2G) |
| conducted_max = QDB(22); |
| |
| maxpwr = QDB(ch->max_power) - delta; |
| maxpwr = max(maxpwr, 0); |
| maxpwr = min(maxpwr, conducted_max); |
| |
| /* CCK txpwr limits for 2.4G band */ |
| if (band->bandtype == BRCM_BAND_2G) { |
| for (i = 0; i < BRCMS_NUM_RATES_CCK; i++) |
| txpwr->cck[i] = (u8) maxpwr; |
| } |
| |
| for (i = 0; i < BRCMS_NUM_RATES_OFDM; i++) { |
| txpwr->ofdm[i] = (u8) maxpwr; |
| |
| /* |
| * OFDM 40 MHz SISO has the same power as the corresponding |
| * MCS0-7 rate unless overriden by the locale specific code. |
| * We set this value to 0 as a flag (presumably 0 dBm isn't |
| * a possibility) and then copy the MCS0-7 value to the 40 MHz |
| * value if it wasn't explicitly set. |
| */ |
| txpwr->ofdm_40_siso[i] = 0; |
| |
| txpwr->ofdm_cdd[i] = (u8) maxpwr; |
| |
| txpwr->ofdm_40_cdd[i] = 0; |
| } |
| |
| delta = 0; |
| if (band->antgain > QDB(6)) |
| delta = band->antgain - QDB(6); /* Excess over 6 dB */ |
| |
| if (band->bandtype == BRCM_BAND_2G) |
| maxpwr_idx = (chan - 1); |
| else |
| maxpwr_idx = CHANNEL_POWER_IDX_5G(chan); |
| |
| maxpwr20 = li_mimo->maxpwr20[maxpwr_idx]; |
| maxpwr40 = li_mimo->maxpwr40[maxpwr_idx]; |
| |
| maxpwr20 = maxpwr20 - delta; |
| maxpwr20 = max(maxpwr20, 0); |
| maxpwr40 = maxpwr40 - delta; |
| maxpwr40 = max(maxpwr40, 0); |
| |
| /* Fill in the MCS 0-7 (SISO) rates */ |
| for (i = 0; i < BRCMS_NUM_RATES_MCS_1_STREAM; i++) { |
| |
| /* |
| * 20 MHz has the same power as the corresponding OFDM rate |
| * unless overriden by the locale specific code. |
| */ |
| txpwr->mcs_20_siso[i] = txpwr->ofdm[i]; |
| txpwr->mcs_40_siso[i] = 0; |
| } |
| |
| /* Fill in the MCS 0-7 CDD rates */ |
| for (i = 0; i < BRCMS_NUM_RATES_MCS_1_STREAM; i++) { |
| txpwr->mcs_20_cdd[i] = (u8) maxpwr20; |
| txpwr->mcs_40_cdd[i] = (u8) maxpwr40; |
| } |
| |
| /* |
| * These locales have SISO expressed in the |
| * table and override CDD later |
| */ |
| if (li_mimo == &locale_bn) { |
| if (li_mimo == &locale_bn) { |
| maxpwr20 = QDB(16); |
| maxpwr40 = 0; |
| |
| if (chan >= 3 && chan <= 11) |
| maxpwr40 = QDB(16); |
| } |
| |
| for (i = 0; i < BRCMS_NUM_RATES_MCS_1_STREAM; i++) { |
| txpwr->mcs_20_siso[i] = (u8) maxpwr20; |
| txpwr->mcs_40_siso[i] = (u8) maxpwr40; |
| } |
| } |
| |
| /* Fill in the MCS 0-7 STBC rates */ |
| for (i = 0; i < BRCMS_NUM_RATES_MCS_1_STREAM; i++) { |
| txpwr->mcs_20_stbc[i] = 0; |
| txpwr->mcs_40_stbc[i] = 0; |
| } |
| |
| /* Fill in the MCS 8-15 SDM rates */ |
| for (i = 0; i < BRCMS_NUM_RATES_MCS_2_STREAM; i++) { |
| txpwr->mcs_20_mimo[i] = (u8) maxpwr20; |
| txpwr->mcs_40_mimo[i] = (u8) maxpwr40; |
| } |
| |
| /* Fill in MCS32 */ |
| txpwr->mcs32 = (u8) maxpwr40; |
| |
| for (i = 0, j = 0; i < BRCMS_NUM_RATES_OFDM; i++, j++) { |
| if (txpwr->ofdm_40_cdd[i] == 0) |
| txpwr->ofdm_40_cdd[i] = txpwr->mcs_40_cdd[j]; |
| if (i == 0) { |
| i = i + 1; |
| if (txpwr->ofdm_40_cdd[i] == 0) |
| txpwr->ofdm_40_cdd[i] = txpwr->mcs_40_cdd[j]; |
| } |
| } |
| |
| /* |
| * Copy the 40 MHZ MCS 0-7 CDD value to the 40 MHZ MCS 0-7 SISO |
| * value if it wasn't provided explicitly. |
| */ |
| for (i = 0; i < BRCMS_NUM_RATES_MCS_1_STREAM; i++) { |
| if (txpwr->mcs_40_siso[i] == 0) |
| txpwr->mcs_40_siso[i] = txpwr->mcs_40_cdd[i]; |
| } |
| |
| for (i = 0, j = 0; i < BRCMS_NUM_RATES_OFDM; i++, j++) { |
| if (txpwr->ofdm_40_siso[i] == 0) |
| txpwr->ofdm_40_siso[i] = txpwr->mcs_40_siso[j]; |
| if (i == 0) { |
| i = i + 1; |
| if (txpwr->ofdm_40_siso[i] == 0) |
| txpwr->ofdm_40_siso[i] = txpwr->mcs_40_siso[j]; |
| } |
| } |
| |
| /* |
| * Copy the 20 and 40 MHz MCS0-7 CDD values to the corresponding |
| * STBC values if they weren't provided explicitly. |
| */ |
| for (i = 0; i < BRCMS_NUM_RATES_MCS_1_STREAM; i++) { |
| if (txpwr->mcs_20_stbc[i] == 0) |
| txpwr->mcs_20_stbc[i] = txpwr->mcs_20_cdd[i]; |
| |
| if (txpwr->mcs_40_stbc[i] == 0) |
| txpwr->mcs_40_stbc[i] = txpwr->mcs_40_cdd[i]; |
| } |
| |
| return; |
| } |
| |
| /* |
| * Verify the chanspec is using a legal set of parameters, i.e. that the |
| * chanspec specified a band, bw, ctl_sb and channel and that the |
| * combination could be legal given any set of circumstances. |
| * RETURNS: true is the chanspec is malformed, false if it looks good. |
| */ |
| static bool brcms_c_chspec_malformed(u16 chanspec) |
| { |
| /* must be 2G or 5G band */ |
| if (!CHSPEC_IS5G(chanspec) && !CHSPEC_IS2G(chanspec)) |
| return true; |
| /* must be 20 or 40 bandwidth */ |
| if (!CHSPEC_IS40(chanspec) && !CHSPEC_IS20(chanspec)) |
| return true; |
| |
| /* 20MHZ b/w must have no ctl sb, 40 must have a ctl sb */ |
| if (CHSPEC_IS20(chanspec)) { |
| if (!CHSPEC_SB_NONE(chanspec)) |
| return true; |
| } else if (!CHSPEC_SB_UPPER(chanspec) && !CHSPEC_SB_LOWER(chanspec)) { |
| return true; |
| } |
| |
| return false; |
| } |
| |
| /* |
| * Validate the chanspec for this locale, for 40MHZ we need to also |
| * check that the sidebands are valid 20MZH channels in this locale |
| * and they are also a legal HT combination |
| */ |
| static bool |
| brcms_c_valid_chanspec_ext(struct brcms_cm_info *wlc_cm, u16 chspec) |
| { |
| struct brcms_c_info *wlc = wlc_cm->wlc; |
| u8 channel = CHSPEC_CHANNEL(chspec); |
| |
| /* check the chanspec */ |
| if (brcms_c_chspec_malformed(chspec)) { |
| wiphy_err(wlc->wiphy, "wl%d: malformed chanspec 0x%x\n", |
| wlc->pub->unit, chspec); |
| return false; |
| } |
| |
| if (CHANNEL_BANDUNIT(wlc_cm->wlc, channel) != |
| chspec_bandunit(chspec)) |
| return false; |
| |
| return true; |
| } |
| |
| bool brcms_c_valid_chanspec_db(struct brcms_cm_info *wlc_cm, u16 chspec) |
| { |
| return brcms_c_valid_chanspec_ext(wlc_cm, chspec); |
| } |
| |
| static bool brcms_is_radar_freq(u16 center_freq) |
| { |
| return center_freq >= 5260 && center_freq <= 5700; |
| } |
| |
| static void brcms_reg_apply_radar_flags(struct wiphy *wiphy) |
| { |
| struct ieee80211_supported_band *sband; |
| struct ieee80211_channel *ch; |
| int i; |
| |
| sband = wiphy->bands[IEEE80211_BAND_5GHZ]; |
| if (!sband) |
| return; |
| |
| for (i = 0; i < sband->n_channels; i++) { |
| ch = &sband->channels[i]; |
| |
| if (!brcms_is_radar_freq(ch->center_freq)) |
| continue; |
| |
| /* |
| * All channels in this range should be passive and have |
| * DFS enabled. |
| */ |
| if (!(ch->flags & IEEE80211_CHAN_DISABLED)) |
| ch->flags |= IEEE80211_CHAN_RADAR | |
| IEEE80211_CHAN_NO_IBSS | |
| IEEE80211_CHAN_PASSIVE_SCAN; |
| } |
| } |
| |
| static void |
| brcms_reg_apply_beaconing_flags(struct wiphy *wiphy, |
| enum nl80211_reg_initiator initiator) |
| { |
| struct ieee80211_supported_band *sband; |
| struct ieee80211_channel *ch; |
| const struct ieee80211_reg_rule *rule; |
| int band, i, ret; |
| |
| for (band = 0; band < IEEE80211_NUM_BANDS; band++) { |
| sband = wiphy->bands[band]; |
| if (!sband) |
| continue; |
| |
| for (i = 0; i < sband->n_channels; i++) { |
| ch = &sband->channels[i]; |
| |
| if (ch->flags & |
| (IEEE80211_CHAN_DISABLED | IEEE80211_CHAN_RADAR)) |
| continue; |
| |
| if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) { |
| ret = freq_reg_info(wiphy, ch->center_freq, |
| 0, &rule); |
| if (ret) |
| continue; |
| |
| if (!(rule->flags & NL80211_RRF_NO_IBSS)) |
| ch->flags &= ~IEEE80211_CHAN_NO_IBSS; |
| if (!(rule->flags & NL80211_RRF_PASSIVE_SCAN)) |
| ch->flags &= |
| ~IEEE80211_CHAN_PASSIVE_SCAN; |
| } else if (ch->beacon_found) { |
| ch->flags &= ~(IEEE80211_CHAN_NO_IBSS | |
| IEEE80211_CHAN_PASSIVE_SCAN); |
| } |
| } |
| } |
| } |
| |
| static int brcms_reg_notifier(struct wiphy *wiphy, |
| struct regulatory_request *request) |
| { |
| struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy); |
| struct brcms_info *wl = hw->priv; |
| struct brcms_c_info *wlc = wl->wlc; |
| struct ieee80211_supported_band *sband; |
| struct ieee80211_channel *ch; |
| int band, i; |
| bool ch_found = false; |
| |
| brcms_reg_apply_radar_flags(wiphy); |
| |
| if (request->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) |
| brcms_reg_apply_beaconing_flags(wiphy, request->initiator); |
| |
| /* Disable radio if all channels disallowed by regulatory */ |
| for (band = 0; !ch_found && band < IEEE80211_NUM_BANDS; band++) { |
| sband = wiphy->bands[band]; |
| if (!sband) |
| continue; |
| |
| for (i = 0; !ch_found && i < sband->n_channels; i++) { |
| ch = &sband->channels[i]; |
| |
| if (!(ch->flags & IEEE80211_CHAN_DISABLED)) |
| ch_found = true; |
| } |
| } |
| |
| if (ch_found) { |
| mboolclr(wlc->pub->radio_disabled, WL_RADIO_COUNTRY_DISABLE); |
| } else { |
| mboolset(wlc->pub->radio_disabled, WL_RADIO_COUNTRY_DISABLE); |
| wiphy_err(wlc->wiphy, "wl%d: %s: no valid channel for \"%s\"\n", |
| wlc->pub->unit, __func__, request->alpha2); |
| } |
| |
| if (wlc->pub->_nbands > 1 || wlc->band->bandtype == BRCM_BAND_2G) |
| wlc_phy_chanspec_ch14_widefilter_set(wlc->band->pi, |
| brcms_c_japan_ccode(request->alpha2)); |
| |
| return 0; |
| } |
| |
| void brcms_c_regd_init(struct brcms_c_info *wlc) |
| { |
| struct wiphy *wiphy = wlc->wiphy; |
| const struct brcms_regd *regd = wlc->cmi->world_regd; |
| struct ieee80211_supported_band *sband; |
| struct ieee80211_channel *ch; |
| struct brcms_chanvec sup_chan; |
| struct brcms_band *band; |
| int band_idx, i; |
| |
| /* Disable any channels not supported by the phy */ |
| for (band_idx = 0; band_idx < wlc->pub->_nbands; band_idx++) { |
| band = wlc->bandstate[band_idx]; |
| |
| wlc_phy_chanspec_band_validch(band->pi, band->bandtype, |
| &sup_chan); |
| |
| if (band_idx == BAND_2G_INDEX) |
| sband = wiphy->bands[IEEE80211_BAND_2GHZ]; |
| else |
| sband = wiphy->bands[IEEE80211_BAND_5GHZ]; |
| |
| for (i = 0; i < sband->n_channels; i++) { |
| ch = &sband->channels[i]; |
| if (!isset(sup_chan.vec, ch->hw_value)) |
| ch->flags |= IEEE80211_CHAN_DISABLED; |
| } |
| } |
| |
| wlc->wiphy->reg_notifier = brcms_reg_notifier; |
| wlc->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY | |
| WIPHY_FLAG_STRICT_REGULATORY; |
| wiphy_apply_custom_regulatory(wlc->wiphy, regd->regdomain); |
| brcms_reg_apply_beaconing_flags(wiphy, NL80211_REGDOM_SET_BY_DRIVER); |
| } |