DRM/i915: Convert HPD interrupts to make use of HPD pin assignment in encoders (v2)
This allows to enable HPD interrupts for individual pins to only receive
hotplug events from lines which are connected and working.
v2: Restructured initailization of const arrays following a suggstion
by Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Egbert Eich <eich@suse.de>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v1)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 1a24744..ef9fce5 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -36,6 +36,59 @@
#include "i915_trace.h"
#include "intel_drv.h"
+static const u32 hpd_ibx[] = {
+ [HPD_CRT] = SDE_CRT_HOTPLUG,
+ [HPD_SDVO_B] = SDE_SDVOB_HOTPLUG,
+ [HPD_PORT_B] = SDE_PORTB_HOTPLUG,
+ [HPD_PORT_C] = SDE_PORTC_HOTPLUG,
+ [HPD_PORT_D] = SDE_PORTD_HOTPLUG
+};
+
+static const u32 hpd_cpt[] = {
+ [HPD_CRT] = SDE_CRT_HOTPLUG_CPT,
+ [HPD_PORT_B] = SDE_PORTB_HOTPLUG_CPT,
+ [HPD_PORT_C] = SDE_PORTC_HOTPLUG_CPT,
+ [HPD_PORT_D] = SDE_PORTD_HOTPLUG_CPT
+};
+
+static const u32 hpd_mask_i915[] = {
+ [HPD_CRT] = CRT_HOTPLUG_INT_EN,
+ [HPD_SDVO_B] = SDVOB_HOTPLUG_INT_EN,
+ [HPD_SDVO_C] = SDVOC_HOTPLUG_INT_EN,
+ [HPD_PORT_B] = PORTB_HOTPLUG_INT_EN,
+ [HPD_PORT_C] = PORTC_HOTPLUG_INT_EN,
+ [HPD_PORT_D] = PORTD_HOTPLUG_INT_EN
+};
+
+static const u32 hpd_status_gen4[] = {
+ [HPD_CRT] = CRT_HOTPLUG_INT_STATUS,
+ [HPD_SDVO_B] = SDVOB_HOTPLUG_INT_STATUS_G4X,
+ [HPD_SDVO_C] = SDVOC_HOTPLUG_INT_STATUS_G4X,
+ [HPD_PORT_B] = PORTB_HOTPLUG_INT_STATUS,
+ [HPD_PORT_C] = PORTC_HOTPLUG_INT_STATUS,
+ [HPD_PORT_D] = PORTD_HOTPLUG_INT_STATUS
+};
+
+static const u32 hpd_status_i965[] = {
+ [HPD_CRT] = CRT_HOTPLUG_INT_STATUS,
+ [HPD_SDVO_B] = SDVOB_HOTPLUG_INT_STATUS_I965,
+ [HPD_SDVO_C] = SDVOC_HOTPLUG_INT_STATUS_I965,
+ [HPD_PORT_B] = PORTB_HOTPLUG_INT_STATUS,
+ [HPD_PORT_C] = PORTC_HOTPLUG_INT_STATUS,
+ [HPD_PORT_D] = PORTD_HOTPLUG_INT_STATUS
+};
+
+static const u32 hpd_status_i915[] = { /* i915 and valleyview are the same */
+ [HPD_CRT] = CRT_HOTPLUG_INT_STATUS,
+ [HPD_SDVO_B] = SDVOB_HOTPLUG_INT_STATUS_I915,
+ [HPD_SDVO_C] = SDVOC_HOTPLUG_INT_STATUS_I915,
+ [HPD_PORT_B] = PORTB_HOTPLUG_INT_STATUS,
+ [HPD_PORT_C] = PORTC_HOTPLUG_INT_STATUS,
+ [HPD_PORT_D] = PORTD_HOTPLUG_INT_STATUS
+};
+
+
+
/* For display hotplug interrupt */
static void
ironlake_enable_display_irq(drm_i915_private_t *dev_priv, u32 mask)
@@ -599,7 +652,7 @@
DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",
hotplug_status);
- if (hotplug_status & dev_priv->hotplug_supported_mask)
+ if (hotplug_status & HOTPLUG_INT_STATUS_I915)
queue_work(dev_priv->wq,
&dev_priv->hotplug_work);
@@ -2034,17 +2087,21 @@
static void ibx_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 mask;
+ struct drm_mode_config *mode_config = &dev->mode_config;
+ struct intel_encoder *intel_encoder;
+ u32 mask = I915_READ(SDEIER);
- if (HAS_PCH_IBX(dev))
- mask = SDE_HOTPLUG_MASK |
- SDE_GMBUS |
- SDE_AUX_MASK;
- else
- mask = SDE_HOTPLUG_MASK_CPT |
- SDE_GMBUS_CPT |
- SDE_AUX_MASK_CPT;
-
+ if (HAS_PCH_IBX(dev)) {
+ mask &= ~SDE_HOTPLUG_MASK;
+ list_for_each_entry(intel_encoder, &mode_config->encoder_list, base.head)
+ mask |= hpd_ibx[intel_encoder->hpd_pin];
+ mask |= SDE_GMBUS | SDE_AUX_MASK;
+ } else {
+ mask &= ~SDE_HOTPLUG_MASK_CPT;
+ list_for_each_entry(intel_encoder, &mode_config->encoder_list, base.head)
+ mask |= hpd_cpt[intel_encoder->hpd_pin];
+ mask |= SDE_GMBUS_CPT | SDE_AUX_MASK_CPT;
+ }
I915_WRITE(SDEIIR, I915_READ(SDEIIR));
I915_WRITE(SDEIMR, ~mask);
I915_WRITE(SDEIER, mask);
@@ -2466,26 +2523,16 @@
static void i915_hpd_irq_setup(struct drm_device *dev)
{
- drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 hotplug_en;
-
if (I915_HAS_HOTPLUG(dev)) {
- hotplug_en = I915_READ(PORT_HOTPLUG_EN);
+ drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ struct drm_mode_config *mode_config = &dev->mode_config;
+ struct intel_encoder *encoder;
+ u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
- if (dev_priv->hotplug_supported_mask & PORTB_HOTPLUG_INT_STATUS)
- hotplug_en |= PORTB_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & PORTC_HOTPLUG_INT_STATUS)
- hotplug_en |= PORTC_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & PORTD_HOTPLUG_INT_STATUS)
- hotplug_en |= PORTD_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_I915)
- hotplug_en |= SDVOC_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_I915)
- hotplug_en |= SDVOB_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) {
- hotplug_en |= CRT_HOTPLUG_INT_EN;
- hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
- }
+ hotplug_en &= ~HOTPLUG_INT_EN_MASK;
+ list_for_each_entry(encoder, &mode_config->encoder_list, base.head)
+ hotplug_en |= hpd_mask_i915[encoder->hpd_pin];
+ hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
/* Ignore TV since it's buggy */
@@ -2576,7 +2623,7 @@
DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",
hotplug_status);
- if (hotplug_status & dev_priv->hotplug_supported_mask)
+ if (hotplug_status & HOTPLUG_INT_STATUS_I915)
queue_work(dev_priv->wq,
&dev_priv->hotplug_work);
@@ -2725,38 +2772,22 @@
static void i965_hpd_irq_setup(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ struct drm_mode_config *mode_config = &dev->mode_config;
+ struct intel_encoder *encoder;
u32 hotplug_en;
/* Note HDMI and DP share hotplug bits */
hotplug_en = 0;
- if (dev_priv->hotplug_supported_mask & PORTB_HOTPLUG_INT_STATUS)
- hotplug_en |= PORTB_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & PORTC_HOTPLUG_INT_STATUS)
- hotplug_en |= PORTC_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & PORTD_HOTPLUG_INT_STATUS)
- hotplug_en |= PORTD_HOTPLUG_INT_EN;
- if (IS_G4X(dev)) {
- if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_G4X)
- hotplug_en |= SDVOC_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_G4X)
- hotplug_en |= SDVOB_HOTPLUG_INT_EN;
- } else {
- if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_I965)
- hotplug_en |= SDVOC_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_I965)
- hotplug_en |= SDVOB_HOTPLUG_INT_EN;
- }
- if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) {
- hotplug_en |= CRT_HOTPLUG_INT_EN;
-
- /* Programming the CRT detection parameters tends
- to generate a spurious hotplug event about three
- seconds later. So just do it once.
- */
- if (IS_G4X(dev))
- hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
- hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
- }
+ list_for_each_entry(encoder, &mode_config->encoder_list, base.head)
+ /* enable bits are the same for all generations */
+ hotplug_en |= hpd_mask_i915[encoder->hpd_pin];
+ /* Programming the CRT detection parameters tends
+ to generate a spurious hotplug event about three
+ seconds later. So just do it once.
+ */
+ if (IS_G4X(dev))
+ hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
+ hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
/* Ignore TV since it's buggy */
@@ -2822,7 +2853,9 @@
DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",
hotplug_status);
- if (hotplug_status & dev_priv->hotplug_supported_mask)
+ if (hotplug_status & (IS_G4X(dev) ?
+ HOTPLUG_INT_STATUS_G4X :
+ HOTPLUG_INT_STATUS_I965))
queue_work(dev_priv->wq,
&dev_priv->hotplug_work);