[POWERPC] Add arch/powerpc driver for UIC, PPC4xx interrupt controller
This patch adds a driver to arch/powerpc/sysdev for the UIC, the
on-chip interrupt controller from IBM/AMCC 4xx chips. It uses the new
irq host mapping infrastructure.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 83fbbfc..e96ca96 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -21,6 +21,7 @@
ifeq ($(CONFIG_PPC_MERGE),y)
obj-$(CONFIG_PPC_I8259) += i8259.o
obj-$(CONFIG_PPC_83xx) += ipic.o
+obj-$(CONFIG_4xx) += uic.o
endif
# Temporary hack until we have migrated to asm-powerpc
diff --git a/arch/powerpc/sysdev/uic.c b/arch/powerpc/sysdev/uic.c
new file mode 100644
index 0000000..cdbe684
--- /dev/null
+++ b/arch/powerpc/sysdev/uic.c
@@ -0,0 +1,342 @@
+/*
+ * arch/powerpc/sysdev/uic.c
+ *
+ * IBM PowerPC 4xx Universal Interrupt Controller
+ *
+ * Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/sysdev.h>
+#include <linux/device.h>
+#include <linux/bootmem.h>
+#include <linux/spinlock.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/dcr.h>
+
+#define NR_UIC_INTS 32
+
+#define UIC_SR 0x0
+#define UIC_ER 0x2
+#define UIC_CR 0x3
+#define UIC_PR 0x4
+#define UIC_TR 0x5
+#define UIC_MSR 0x6
+#define UIC_VR 0x7
+#define UIC_VCR 0x8
+
+#define uic_irq_to_hw(virq) (irq_map[virq].hwirq)
+
+struct uic *primary_uic;
+
+struct uic {
+ int index;
+ int dcrbase;
+
+ spinlock_t lock;
+
+ /* The remapper for this UIC */
+ struct irq_host *irqhost;
+
+ /* For secondary UICs, the cascade interrupt's irqaction */
+ struct irqaction cascade;
+
+ /* The device node of the interrupt controller */
+ struct device_node *of_node;
+};
+
+static void uic_unmask_irq(unsigned int virq)
+{
+ struct uic *uic = get_irq_chip_data(virq);
+ unsigned int src = uic_irq_to_hw(virq);
+ unsigned long flags;
+ u32 er;
+
+ spin_lock_irqsave(&uic->lock, flags);
+ er = mfdcr(uic->dcrbase + UIC_ER);
+ er |= 1 << (31 - src);
+ mtdcr(uic->dcrbase + UIC_ER, er);
+ spin_unlock_irqrestore(&uic->lock, flags);
+}
+
+static void uic_mask_irq(unsigned int virq)
+{
+ struct uic *uic = get_irq_chip_data(virq);
+ unsigned int src = uic_irq_to_hw(virq);
+ unsigned long flags;
+ u32 er;
+
+ spin_lock_irqsave(&uic->lock, flags);
+ er = mfdcr(uic->dcrbase + UIC_ER);
+ er &= ~(1 << (31 - src));
+ mtdcr(uic->dcrbase + UIC_ER, er);
+ spin_unlock_irqrestore(&uic->lock, flags);
+}
+
+static void uic_ack_irq(unsigned int virq)
+{
+ struct uic *uic = get_irq_chip_data(virq);
+ unsigned int src = uic_irq_to_hw(virq);
+ unsigned long flags;
+
+ spin_lock_irqsave(&uic->lock, flags);
+ mtdcr(uic->dcrbase + UIC_SR, 1 << (31-src));
+ spin_unlock_irqrestore(&uic->lock, flags);
+}
+
+static int uic_set_irq_type(unsigned int virq, unsigned int flow_type)
+{
+ struct uic *uic = get_irq_chip_data(virq);
+ unsigned int src = uic_irq_to_hw(virq);
+ struct irq_desc *desc = get_irq_desc(virq);
+ unsigned long flags;
+ int trigger, polarity;
+ u32 tr, pr, mask;
+
+ switch (flow_type & IRQ_TYPE_SENSE_MASK) {
+ case IRQ_TYPE_NONE:
+ uic_mask_irq(virq);
+ return 0;
+
+ case IRQ_TYPE_EDGE_RISING:
+ trigger = 1; polarity = 1;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ trigger = 1; polarity = 0;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ trigger = 0; polarity = 1;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ trigger = 0; polarity = 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ mask = ~(1 << (31 - src));
+
+ spin_lock_irqsave(&uic->lock, flags);
+ tr = mfdcr(uic->dcrbase + UIC_TR);
+ pr = mfdcr(uic->dcrbase + UIC_PR);
+ tr = (tr & mask) | (trigger << (31-src));
+ pr = (pr & mask) | (polarity << (31-src));
+
+ mtdcr(uic->dcrbase + UIC_PR, pr);
+ mtdcr(uic->dcrbase + UIC_TR, tr);
+
+ desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
+ desc->status |= flow_type & IRQ_TYPE_SENSE_MASK;
+ if (trigger)
+ desc->status |= IRQ_LEVEL;
+
+ spin_unlock_irqrestore(&uic->lock, flags);
+
+ return 0;
+}
+
+static struct irq_chip uic_irq_chip = {
+ .typename = " UIC ",
+ .unmask = uic_unmask_irq,
+ .mask = uic_mask_irq,
+/* .mask_ack = uic_mask_irq_and_ack, */
+ .ack = uic_ack_irq,
+ .set_type = uic_set_irq_type,
+};
+
+static int uic_host_match(struct irq_host *h, struct device_node *node)
+{
+ struct uic *uic = h->host_data;
+ return uic->of_node == node;
+}
+
+static int uic_host_map(struct irq_host *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ struct uic *uic = h->host_data;
+
+ set_irq_chip_data(virq, uic);
+ /* Despite the name, handle_level_irq() works for both level
+ * and edge irqs on UIC. FIXME: check this is correct */
+ set_irq_chip_and_handler(virq, &uic_irq_chip, handle_level_irq);
+
+ /* Set default irq type */
+ set_irq_type(virq, IRQ_TYPE_NONE);
+
+ return 0;
+}
+
+static int uic_host_xlate(struct irq_host *h, struct device_node *ct,
+ u32 *intspec, unsigned int intsize,
+ irq_hw_number_t *out_hwirq, unsigned int *out_type)
+
+{
+ /* UIC intspecs must have 2 cells */
+ BUG_ON(intsize != 2);
+ *out_hwirq = intspec[0];
+ *out_type = intspec[1];
+ return 0;
+}
+
+static struct irq_host_ops uic_host_ops = {
+ .match = uic_host_match,
+ .map = uic_host_map,
+ .xlate = uic_host_xlate,
+};
+
+irqreturn_t uic_cascade(int virq, void *data)
+{
+ struct uic *uic = data;
+ u32 msr;
+ int src;
+ int subvirq;
+
+ msr = mfdcr(uic->dcrbase + UIC_MSR);
+ src = 32 - ffs(msr);
+
+ subvirq = irq_linear_revmap(uic->irqhost, src);
+ generic_handle_irq(subvirq);
+
+ return IRQ_HANDLED;
+}
+
+static struct uic * __init uic_init_one(struct device_node *node)
+{
+ struct uic *uic;
+ const u32 *indexp, *dcrreg;
+ int len;
+
+ BUG_ON(! device_is_compatible(node, "ibm,uic"));
+
+ uic = alloc_bootmem(sizeof(*uic));
+ if (! uic)
+ return NULL; /* FIXME: panic? */
+
+ memset(uic, 0, sizeof(*uic));
+ spin_lock_init(&uic->lock);
+ uic->of_node = of_node_get(node);
+ indexp = get_property(node, "cell-index", &len);
+ if (!indexp || (len != sizeof(u32))) {
+ printk(KERN_ERR "uic: Device node %s has missing or invalid "
+ "cell-index property\n", node->full_name);
+ return NULL;
+ }
+ uic->index = *indexp;
+
+ dcrreg = get_property(node, "dcr-reg", &len);
+ if (!dcrreg || (len != 2*sizeof(u32))) {
+ printk(KERN_ERR "uic: Device node %s has missing or invalid "
+ "dcr-reg property\n", node->full_name);
+ return NULL;
+ }
+ uic->dcrbase = *dcrreg;
+
+ uic->irqhost = irq_alloc_host(IRQ_HOST_MAP_LINEAR, NR_UIC_INTS,
+ &uic_host_ops, -1);
+ if (! uic->irqhost) {
+ of_node_put(node);
+ return NULL; /* FIXME: panic? */
+ }
+
+ uic->irqhost->host_data = uic;
+
+ /* Start with all interrupts disabled, level and non-critical */
+ mtdcr(uic->dcrbase + UIC_ER, 0);
+ mtdcr(uic->dcrbase + UIC_CR, 0);
+ mtdcr(uic->dcrbase + UIC_TR, 0);
+ /* Clear any pending interrupts, in case the firmware left some */
+ mtdcr(uic->dcrbase + UIC_SR, 0xffffffff);
+
+ printk ("UIC%d (%d IRQ sources) at DCR 0x%x\n", uic->index,
+ NR_UIC_INTS, uic->dcrbase);
+
+ return uic;
+}
+
+void __init uic_init_tree(void)
+{
+ struct device_node *np;
+ struct uic *uic;
+ const u32 *interrupts;
+
+ /* First locate and initialize the top-level UIC */
+
+ np = of_find_compatible_node(NULL, NULL, "ibm,uic");
+ while (np) {
+ interrupts = get_property(np, "interrupts", NULL);
+ if (! interrupts)
+ break;
+
+ np = of_find_compatible_node(np, NULL, "ibm,uic");
+ }
+
+ BUG_ON(!np); /* uic_init_tree() assumes there's a UIC as the
+ * top-level interrupt controller */
+ primary_uic = uic_init_one(np);
+ if (! primary_uic)
+ panic("Unable to initialize primary UIC %s\n", np->full_name);
+
+ irq_set_default_host(primary_uic->irqhost);
+ of_node_put(np);
+
+ /* The scan again for cascaded UICs */
+ np = of_find_compatible_node(NULL, NULL, "ibm,uic");
+ while (np) {
+ interrupts = get_property(np, "interrupts", NULL);
+ if (interrupts) {
+ /* Secondary UIC */
+ int cascade_virq;
+ int ret;
+
+ uic = uic_init_one(np);
+ if (! uic)
+ panic("Unable to initialize a secondary UIC %s\n",
+ np->full_name);
+
+ cascade_virq = irq_of_parse_and_map(np, 0);
+
+ uic->cascade.handler = uic_cascade;
+ uic->cascade.name = "UIC cascade";
+ uic->cascade.dev_id = uic;
+
+ ret = setup_irq(cascade_virq, &uic->cascade);
+ if (ret)
+ printk(KERN_ERR "Failed to setup_irq(%d) for "
+ "UIC%d cascade\n", cascade_virq,
+ uic->index);
+
+ /* FIXME: setup critical cascade?? */
+ }
+
+ np = of_find_compatible_node(np, NULL, "ibm,uic");
+ }
+}
+
+/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
+unsigned int uic_get_irq(void)
+{
+ u32 msr;
+ int src;
+
+ BUG_ON(! primary_uic);
+
+ msr = mfdcr(primary_uic->dcrbase + UIC_MSR);
+ src = 32 - ffs(msr);
+
+ return irq_linear_revmap(primary_uic->irqhost, src);
+}
diff --git a/include/asm-powerpc/uic.h b/include/asm-powerpc/uic.h
new file mode 100644
index 0000000..970eb7e
--- /dev/null
+++ b/include/asm-powerpc/uic.h
@@ -0,0 +1,23 @@
+/*
+ * include/asm-powerpc/uic.h
+ *
+ * IBM PPC4xx UIC external definitions and structure.
+ *
+ * Maintainer: David Gibson <dwg@au1.ibm.com>
+ * Copyright 2007 IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_POWERPC_UIC_H
+#define _ASM_POWERPC_UIC_H
+
+#ifdef __KERNEL__
+
+extern void __init uic_init_tree(void);
+extern unsigned int uic_get_irq(void);
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_UIC_H */