arm64: Change memcpy in kernel to use the copy template file
This converts the memcpy.S to use the copy template file. The copy
template file was based originally on the memcpy.S
Signed-off-by: Feng Kan <fkan@apm.com>
Signed-off-by: Balamurugan Shanmugam <bshanmugam@apm.com>
[catalin.marinas@arm.com: removed tmp3(w) .req statements as they are not used]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
diff --git a/arch/arm64/lib/copy_template.S b/arch/arm64/lib/copy_template.S
new file mode 100644
index 0000000..410fbdb
--- /dev/null
+++ b/arch/arm64/lib/copy_template.S
@@ -0,0 +1,193 @@
+/*
+ * Copyright (C) 2013 ARM Ltd.
+ * Copyright (C) 2013 Linaro.
+ *
+ * This code is based on glibc cortex strings work originally authored by Linaro
+ * and re-licensed under GPLv2 for the Linux kernel. The original code can
+ * be found @
+ *
+ * http://bazaar.launchpad.net/~linaro-toolchain-dev/cortex-strings/trunk/
+ * files/head:/src/aarch64/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+/*
+ * Copy a buffer from src to dest (alignment handled by the hardware)
+ *
+ * Parameters:
+ * x0 - dest
+ * x1 - src
+ * x2 - n
+ * Returns:
+ * x0 - dest
+ */
+dstin .req x0
+src .req x1
+count .req x2
+tmp1 .req x3
+tmp1w .req w3
+tmp2 .req x4
+tmp2w .req w4
+dst .req x6
+
+A_l .req x7
+A_h .req x8
+B_l .req x9
+B_h .req x10
+C_l .req x11
+C_h .req x12
+D_l .req x13
+D_h .req x14
+
+ mov dst, dstin
+ cmp count, #16
+ /*When memory length is less than 16, the accessed are not aligned.*/
+ b.lo .Ltiny15
+
+ neg tmp2, src
+ ands tmp2, tmp2, #15/* Bytes to reach alignment. */
+ b.eq .LSrcAligned
+ sub count, count, tmp2
+ /*
+ * Copy the leading memory data from src to dst in an increasing
+ * address order.By this way,the risk of overwritting the source
+ * memory data is eliminated when the distance between src and
+ * dst is less than 16. The memory accesses here are alignment.
+ */
+ tbz tmp2, #0, 1f
+ ldrb1 tmp1w, src, #1
+ strb1 tmp1w, dst, #1
+1:
+ tbz tmp2, #1, 2f
+ ldrh1 tmp1w, src, #2
+ strh1 tmp1w, dst, #2
+2:
+ tbz tmp2, #2, 3f
+ ldr1 tmp1w, src, #4
+ str1 tmp1w, dst, #4
+3:
+ tbz tmp2, #3, .LSrcAligned
+ ldr1 tmp1, src, #8
+ str1 tmp1, dst, #8
+
+.LSrcAligned:
+ cmp count, #64
+ b.ge .Lcpy_over64
+ /*
+ * Deal with small copies quickly by dropping straight into the
+ * exit block.
+ */
+.Ltail63:
+ /*
+ * Copy up to 48 bytes of data. At this point we only need the
+ * bottom 6 bits of count to be accurate.
+ */
+ ands tmp1, count, #0x30
+ b.eq .Ltiny15
+ cmp tmp1w, #0x20
+ b.eq 1f
+ b.lt 2f
+ ldp1 A_l, A_h, src, #16
+ stp1 A_l, A_h, dst, #16
+1:
+ ldp1 A_l, A_h, src, #16
+ stp1 A_l, A_h, dst, #16
+2:
+ ldp1 A_l, A_h, src, #16
+ stp1 A_l, A_h, dst, #16
+.Ltiny15:
+ /*
+ * Prefer to break one ldp/stp into several load/store to access
+ * memory in an increasing address order,rather than to load/store 16
+ * bytes from (src-16) to (dst-16) and to backward the src to aligned
+ * address,which way is used in original cortex memcpy. If keeping
+ * the original memcpy process here, memmove need to satisfy the
+ * precondition that src address is at least 16 bytes bigger than dst
+ * address,otherwise some source data will be overwritten when memove
+ * call memcpy directly. To make memmove simpler and decouple the
+ * memcpy's dependency on memmove, withdrew the original process.
+ */
+ tbz count, #3, 1f
+ ldr1 tmp1, src, #8
+ str1 tmp1, dst, #8
+1:
+ tbz count, #2, 2f
+ ldr1 tmp1w, src, #4
+ str1 tmp1w, dst, #4
+2:
+ tbz count, #1, 3f
+ ldrh1 tmp1w, src, #2
+ strh1 tmp1w, dst, #2
+3:
+ tbz count, #0, .Lexitfunc
+ ldrb1 tmp1w, src, #1
+ strb1 tmp1w, dst, #1
+
+ b .Lexitfunc
+
+.Lcpy_over64:
+ subs count, count, #128
+ b.ge .Lcpy_body_large
+ /*
+ * Less than 128 bytes to copy, so handle 64 here and then jump
+ * to the tail.
+ */
+ ldp1 A_l, A_h, src, #16
+ stp1 A_l, A_h, dst, #16
+ ldp1 B_l, B_h, src, #16
+ ldp1 C_l, C_h, src, #16
+ stp1 B_l, B_h, dst, #16
+ stp1 C_l, C_h, dst, #16
+ ldp1 D_l, D_h, src, #16
+ stp1 D_l, D_h, dst, #16
+
+ tst count, #0x3f
+ b.ne .Ltail63
+ b .Lexitfunc
+
+ /*
+ * Critical loop. Start at a new cache line boundary. Assuming
+ * 64 bytes per line this ensures the entire loop is in one line.
+ */
+ .p2align L1_CACHE_SHIFT
+.Lcpy_body_large:
+ /* pre-get 64 bytes data. */
+ ldp1 A_l, A_h, src, #16
+ ldp1 B_l, B_h, src, #16
+ ldp1 C_l, C_h, src, #16
+ ldp1 D_l, D_h, src, #16
+1:
+ /*
+ * interlace the load of next 64 bytes data block with store of the last
+ * loaded 64 bytes data.
+ */
+ stp1 A_l, A_h, dst, #16
+ ldp1 A_l, A_h, src, #16
+ stp1 B_l, B_h, dst, #16
+ ldp1 B_l, B_h, src, #16
+ stp1 C_l, C_h, dst, #16
+ ldp1 C_l, C_h, src, #16
+ stp1 D_l, D_h, dst, #16
+ ldp1 D_l, D_h, src, #16
+ subs count, count, #64
+ b.ge 1b
+ stp1 A_l, A_h, dst, #16
+ stp1 B_l, B_h, dst, #16
+ stp1 C_l, C_h, dst, #16
+ stp1 D_l, D_h, dst, #16
+
+ tst count, #0x3f
+ b.ne .Ltail63
+.Lexitfunc: