ARM: Realview/Versatile/Integrator: remove unused definitions from platform.h
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/mach-integrator/include/mach/platform.h b/arch/arm/mach-integrator/include/mach/platform.h
index 0e172e4..5e6ea5c 100644
--- a/arch/arm/mach-integrator/include/mach/platform.h
+++ b/arch/arm/mach-integrator/include/mach/platform.h
@@ -23,9 +23,6 @@
*
* Integrator address map
*
- * NOTE: This is a multi-hosted header file for use with uHAL and
- * supported debuggers.
- *
* ***********************************************************************/
#ifndef __address_h
@@ -330,20 +327,6 @@
*/
#define PHYS_PCI_V3_BASE 0x62000000
-#define PCI_DRAMSIZE INTEGRATOR_SSRAM_SIZE
-
-/* 'export' these to UHAL */
-#define UHAL_PCI_IO PCI_IO_BASE
-#define UHAL_PCI_MEM PCI_MEM_BASE
-#define UHAL_PCI_ALLOC_IO_BASE 0x00004000
-#define UHAL_PCI_ALLOC_MEM_BASE PCI_MEM_BASE
-#define UHAL_PCI_MAX_SLOT 20
-
-/* ========================================================================
- * Start of uHAL definitions
- * ========================================================================
- */
-
/* ------------------------------------------------------------------------
* Integrator Interrupt Controllers
* ------------------------------------------------------------------------
@@ -391,7 +374,7 @@
*/
/* ------------------------------------------------------------------------
- * LED's - The header LED is not accessible via the uHAL API
+ * LED's
* ------------------------------------------------------------------------
*
*/
@@ -404,34 +387,18 @@
#define LED_BANK INTEGRATOR_DBG_LEDS
/*
- * Memory definitions - run uHAL out of SSRAM.
- *
- */
-#define uHAL_MEMORY_SIZE INTEGRATOR_SSRAM_SIZE
-
-/*
- * Clean base - dummy
- *
- */
-#define CLEAN_BASE INTEGRATOR_BOOT_ROM_HI
-
-/*
* Timer definitions
*
* Only use timer 1 & 2
* (both run at 24MHz and will need the clock divider set to 16).
*
- * Timer 0 runs at bus frequency and therefore could vary and currently
- * uHAL can't handle that.
- *
+ * Timer 0 runs at bus frequency
*/
#define INTEGRATOR_TIMER0_BASE INTEGRATOR_CT_BASE
#define INTEGRATOR_TIMER1_BASE (INTEGRATOR_CT_BASE + 0x100)
#define INTEGRATOR_TIMER2_BASE (INTEGRATOR_CT_BASE + 0x200)
-#define MAX_TIMER 2
-#define MAX_PERIOD 699050
#define TICKS_PER_uSEC 24
/*
@@ -439,14 +406,9 @@
*
*/
#define mSEC_1 1000
-#define mSEC_5 (mSEC_1 * 5)
#define mSEC_10 (mSEC_1 * 10)
-#define mSEC_25 (mSEC_1 * 25)
-#define SEC_1 (mSEC_1 * 1000)
#define INTEGRATOR_CSR_BASE 0x10000000
#define INTEGRATOR_CSR_SIZE 0x10000000
#endif
-
-/* END */
diff --git a/arch/arm/mach-realview/include/mach/platform.h b/arch/arm/mach-realview/include/mach/platform.h
index 86c0c44..1b77a27 100644
--- a/arch/arm/mach-realview/include/mach/platform.h
+++ b/arch/arm/mach-realview/include/mach/platform.h
@@ -231,12 +231,6 @@
#define REALVIEW_INTREG_OFFSET 0x8 /* Interrupt control */
#define REALVIEW_DECODE_OFFSET 0xC /* Fitted logic modules */
-/*
- * Clean base - dummy
- *
- */
-#define CLEAN_BASE REALVIEW_BOOT_ROM_HI
-
/*
* System controller bit assignment
*/
@@ -249,20 +243,6 @@
#define REALVIEW_TIMER4_EnSel 21
-#define MAX_TIMER 2
-#define MAX_PERIOD 699050
-#define TICKS_PER_uSEC 1
-
-/*
- * These are useconds NOT ticks.
- *
- */
-#define mSEC_1 1000
-#define mSEC_5 (mSEC_1 * 5)
-#define mSEC_10 (mSEC_1 * 10)
-#define mSEC_25 (mSEC_1 * 25)
-#define SEC_1 (mSEC_1 * 1000)
-
#define REALVIEW_CSR_BASE 0x10000000
#define REALVIEW_CSR_SIZE 0x10000000
diff --git a/arch/arm/mach-versatile/include/mach/platform.h b/arch/arm/mach-versatile/include/mach/platform.h
index 8320739..ec08740 100644
--- a/arch/arm/mach-versatile/include/mach/platform.h
+++ b/arch/arm/mach-versatile/include/mach/platform.h
@@ -205,7 +205,7 @@
#define VERSATILE_CLCD_BASE 0x10120000 /* CLCD */
#define VERSATILE_DMAC_BASE 0x10130000 /* DMA controller */
#define VERSATILE_VIC_BASE 0x10140000 /* Vectored interrupt controller */
-#define VERSATILE_PERIPH_BASE 0x10150000 /* off-chip peripherals alias from */
+#define VERSATILE_PERIPH_BASE 0x10150000 /* off-chip peripherals alias from */
/* 0x10000000 - 0x100FFFFF */
#define VERSATILE_AHBM_BASE 0x101D0000 /* AHB monitor */
#define VERSATILE_SCTL_BASE 0x101E0000 /* System controller */
@@ -213,7 +213,7 @@
#define VERSATILE_TIMER0_1_BASE 0x101E2000 /* Timer 0 and 1 */
#define VERSATILE_TIMER2_3_BASE 0x101E3000 /* Timer 2 and 3 */
#define VERSATILE_GPIO0_BASE 0x101E4000 /* GPIO port 0 */
-#define VERSATILE_GPIO1_BASE 0x101E5000 /* GPIO port 1 */
+#define VERSATILE_GPIO1_BASE 0x101E5000 /* GPIO port 1 */
#define VERSATILE_GPIO2_BASE 0x101E6000 /* GPIO port 2 */
#define VERSATILE_GPIO3_BASE 0x101E7000 /* GPIO port 3 */
#define VERSATILE_RTC_BASE 0x101E8000 /* Real Time Clock */
@@ -379,12 +379,6 @@
#define SIC_INT_PCI3 30
-/*
- * Clean base - dummy
- *
- */
-#define CLEAN_BASE VERSATILE_BOOT_ROM_HI
-
/*
* System controller bit assignment
*/
@@ -397,20 +391,6 @@
#define VERSATILE_TIMER4_EnSel 21
-#define MAX_TIMER 2
-#define MAX_PERIOD 699050
-#define TICKS_PER_uSEC 1
-
-/*
- * These are useconds NOT ticks.
- *
- */
-#define mSEC_1 1000
-#define mSEC_5 (mSEC_1 * 5)
-#define mSEC_10 (mSEC_1 * 10)
-#define mSEC_25 (mSEC_1 * 25)
-#define SEC_1 (mSEC_1 * 1000)
-
#define VERSATILE_CSR_BASE 0x10000000
#define VERSATILE_CSR_SIZE 0x10000000
@@ -432,5 +412,3 @@
#endif
#endif
-
-/* END */