arch/s390/Kconfig - kernel/msm-4.9 - Gitiles

 #
 # For a description of the syntax of this configuration file,
 # see Documentation/kbuild/kconfig-language.txt.
 #

 config SCHED_MC
 	def_bool y
 	depends on SMP

 config MMU
 	def_bool y

 config ZONE_DMA
 	def_bool y
 	depends on 64BIT

 config LOCKDEP_SUPPORT
 	def_bool y

 config STACKTRACE_SUPPORT
 	def_bool y

 config HAVE_LATENCYTOP_SUPPORT
 	def_bool y

 config RWSEM_GENERIC_SPINLOCK
 	bool

 config RWSEM_XCHGADD_ALGORITHM
 	def_bool y

 config ARCH_HAS_ILOG2_U32
 	bool
 	default n

 config ARCH_HAS_ILOG2_U64
 	bool
 	default n

 config GENERIC_HWEIGHT
 	def_bool y

 config GENERIC_TIME
 	def_bool y

 config GENERIC_CLOCKEVENTS
 	def_bool y

 config GENERIC_BUG
 	bool
 	depends on BUG
 	default y

 config NO_IOMEM
 	def_bool y

 config NO_DMA
 	def_bool y

 config GENERIC_LOCKBREAK
 	bool
 	default y
 	depends on SMP && PREEMPT

 config PGSTE
 	bool
 	default y if KVM

 mainmenu "Linux Kernel Configuration"

 config S390
 	def_bool y
 	select HAVE_OPROFILE
 	select HAVE_KPROBES
 	select HAVE_KRETPROBES
 	select HAVE_KVM if 64BIT

 source "init/Kconfig"

 menu "Base setup"

 comment "Processor type and features"

 source "kernel/time/Kconfig"

 config 64BIT
 	bool "64 bit kernel"
 	help
 	  Select this option if you have a 64 bit IBM zSeries machine
 	  and want to use the 64 bit addressing mode.

 config 32BIT
 	bool
 	default y if !64BIT

 config SMP
 	bool "Symmetric multi-processing support"
 	---help---
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
 	  you have a system with more than one CPU, say Y.

 	  If you say N here, the kernel will run on single and multiprocessor
 	  machines, but will use only one CPU of a multiprocessor machine. If
 	  you say Y here, the kernel will run on many, but not all,
 	  singleprocessor machines. On a singleprocessor machine, the kernel
 	  will run faster if you say N here.

 	  See also the SMP-HOWTO available at
 	  <http://www.tldp.org/docs.html#howto>.

 	  Even if you don't know what to do here, say Y.

 config NR_CPUS
 	int "Maximum number of CPUs (2-64)"
 	range 2 64
 	depends on SMP
 	default "32" if !64BIT
 	default "64" if 64BIT
 	help
 	  This allows you to specify the maximum number of CPUs which this
 	  kernel will support.  The maximum supported value is 64 and the
 	  minimum value which makes sense is 2.

 	  This is purely to save memory - each supported CPU adds
 	  approximately sixteen kilobytes to the kernel image.

 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs"
 	depends on SMP
 	select HOTPLUG
 	default n
 	help
 	  Say Y here to be able to turn CPUs off and on. CPUs
 	  can be controlled through /sys/devices/system/cpu/cpu#.
 	  Say N if you want to disable CPU hotplug.

 config MATHEMU
 	bool "IEEE FPU emulation"
 	depends on MARCH_G5
 	help
 	  This option is required for IEEE compliant floating point arithmetic
 	  on older S/390 machines. Say Y unless you know your machine doesn't
 	  need this.

 config COMPAT
 	bool "Kernel support for 31 bit emulation"
 	depends on 64BIT
 	help
 	  Select this option if you want to enable your system kernel to
 	  handle system-calls from ELF binaries for 31 bit ESA.  This option
 	  (and some other stuff like libraries and such) is needed for
 	  executing 31 bit applications.  It is safe to say "Y".

 config SYSVIPC_COMPAT
 	bool
 	depends on COMPAT && SYSVIPC
 	default y

 config AUDIT_ARCH
 	bool
 	default y

 config S390_SWITCH_AMODE
 	bool "Switch kernel/user addressing modes"
 	help
 	  This option allows to switch the addressing modes of kernel and user
 	  space. The kernel parameter switch_amode=on will enable this feature,
 	  default is disabled. Enabling this (via kernel parameter) on machines
 	  earlier than IBM System z9-109 EC/BC will reduce system performance.

 	  Note that this option will also be selected by selecting the execute
 	  protection option below. Enabling the execute protection via the
 	  noexec kernel parameter will also switch the addressing modes,
 	  independent of the switch_amode kernel parameter.


 config S390_EXEC_PROTECT
 	bool "Data execute protection"
 	select S390_SWITCH_AMODE
 	help
 	  This option allows to enable a buffer overflow protection for user
 	  space programs and it also selects the addressing mode option above.
 	  The kernel parameter noexec=on will enable this feature and also
 	  switch the addressing modes, default is disabled. Enabling this (via
 	  kernel parameter) on machines earlier than IBM System z9-109 EC/BC
 	  will reduce system performance.

 comment "Code generation options"

 choice
 	prompt "Processor type"
 	default MARCH_G5

 config MARCH_G5
 	bool "S/390 model G5 and G6"
 	depends on !64BIT
 	help
 	  Select this to build a 31 bit kernel that works
 	  on all S/390 and zSeries machines.

 config MARCH_Z900
 	bool "IBM eServer zSeries model z800 and z900"
 	help
 	  Select this to optimize for zSeries machines. This
 	  will enable some optimizations that are not available
 	  on older 31 bit only CPUs.

 config MARCH_Z990
 	bool "IBM eServer zSeries model z890 and z990"
 	help
 	  Select this enable optimizations for model z890/z990.
 	  This will be slightly faster but does not work on
 	  older machines such as the z900.

 config MARCH_Z9_109
 	bool "IBM System z9"
 	help
 	  Select this to enable optimizations for IBM System z9-109, IBM
 	  System z9 Enterprise Class (z9 EC), and IBM System z9 Business
 	  Class (z9 BC). The kernel will be slightly faster but will not
 	  work on older machines such as the z990, z890, z900, and z800.

 endchoice

 config PACK_STACK
 	bool "Pack kernel stack"
 	help
 	  This option enables the compiler option -mkernel-backchain if it
 	  is available. If the option is available the compiler supports
 	  the new stack layout which dramatically reduces the minimum stack
 	  frame size. With an old compiler a non-leaf function needs a
 	  minimum of 96 bytes on 31 bit and 160 bytes on 64 bit. With
 	  -mkernel-backchain the minimum size drops to 16 byte on 31 bit
 	  and 24 byte on 64 bit.

 	  Say Y if you are unsure.

 config SMALL_STACK
 	bool "Use 4kb/8kb for kernel stack instead of 8kb/16kb"
 	depends on PACK_STACK && !LOCKDEP
 	help
 	  If you say Y here and the compiler supports the -mkernel-backchain
 	  option the kernel will use a smaller kernel stack size. For 31 bit
 	  the reduced size is 4kb instead of 8kb and for 64 bit it is 8kb
 	  instead of 16kb. This allows to run more thread on a system and
 	  reduces the pressure on the memory management for higher order
 	  page allocations.

 	  Say N if you are unsure.


 config CHECK_STACK
 	bool "Detect kernel stack overflow"
 	help
 	  This option enables the compiler option -mstack-guard and
 	  -mstack-size if they are available. If the compiler supports them
 	  it will emit additional code to each function prolog to trigger
 	  an illegal operation if the kernel stack is about to overflow.

 	  Say N if you are unsure.

 config STACK_GUARD
 	int "Size of the guard area (128-1024)"
 	range 128 1024
 	depends on CHECK_STACK
 	default "256"
 	help
 	  This allows you to specify the size of the guard area at the lower
 	  end of the kernel stack. If the kernel stack points into the guard
 	  area on function entry an illegal operation is triggered. The size
 	  needs to be a power of 2. Please keep in mind that the size of an
 	  interrupt frame is 184 bytes for 31 bit and 328 bytes on 64 bit.
 	  The minimum size for the stack guard should be 256 for 31 bit and
 	  512 for 64 bit.

 config WARN_STACK
 	bool "Emit compiler warnings for function with broken stack usage"
 	help
 	  This option enables the compiler options -mwarn-framesize and
 	  -mwarn-dynamicstack. If the compiler supports these options it
 	  will generate warnings for function which either use alloca or
 	  create a stack frame bigger then CONFIG_WARN_STACK_SIZE.

 	  Say N if you are unsure.

 config WARN_STACK_SIZE
 	int "Maximum frame size considered safe (128-2048)"
 	range 128 2048
 	depends on WARN_STACK
 	default "256"
 	help
 	  This allows you to specify the maximum frame size a function may
 	  have without the compiler complaining about it.

 config ARCH_POPULATES_NODE_MAP
 	def_bool y

 comment "Kernel preemption"

 source "kernel/Kconfig.preempt"

 config ARCH_SPARSEMEM_ENABLE
 	def_bool y
 	select SPARSEMEM_VMEMMAP_ENABLE
 	select SPARSEMEM_VMEMMAP

 config ARCH_SPARSEMEM_DEFAULT
 	def_bool y

 config ARCH_SELECT_MEMORY_MODEL
        def_bool y

 source "mm/Kconfig"

 comment "I/O subsystem configuration"

 config MACHCHK_WARNING
 	bool "Process warning machine checks"
 	help
 	  Select this option if you want the machine check handler on IBM S/390 or
 	  zSeries to process warning machine checks (e.g. on power failures).
 	  If unsure, say "Y".

 config QDIO
 	tristate "QDIO support"
 	---help---
 	  This driver provides the Queued Direct I/O base support for
 	  IBM System z.

 	  To compile this driver as a module, choose M here: the
 	  module will be called qdio.

 	  If unsure, say Y.

 config QDIO_DEBUG
 	bool "Extended debugging information"
 	depends on QDIO
 	help
 	  Say Y here to get extended debugging output in
 	    /sys/kernel/debug/s390dbf/qdio...
 	  Warning: this option reduces the performance of the QDIO module.

 	  If unsure, say N.

 comment "Misc"

 config IPL
 	bool "Builtin IPL record support"
 	help
 	  If you want to use the produced kernel to IPL directly from a
 	  device, you have to merge a bootsector specific to the device
 	  into the first bytes of the kernel. You will have to select the
 	  IPL device.

 choice
 	prompt "IPL method generated into head.S"
 	depends on IPL
 	default IPL_TAPE
 	help
 	  Select "tape" if you want to IPL the image from a Tape.

 	  Select "vm_reader" if you are running under VM/ESA and want
 	  to IPL the image from the emulated card reader.

 config IPL_TAPE
 	bool "tape"

 config IPL_VM
 	bool "vm_reader"

 endchoice

 source "fs/Kconfig.binfmt"

 config FORCE_MAX_ZONEORDER
 	int
 	default "9"

 config PROCESS_DEBUG
 	bool "Show crashed user process info"
 	help
 	  Say Y to print all process fault locations to the console.  This is
 	  a debugging option; you probably do not want to set it unless you
 	  are an S390 port maintainer.

 config PFAULT
 	bool "Pseudo page fault support"
 	help
 	  Select this option, if you want to use PFAULT pseudo page fault
 	  handling under VM. If running native or in LPAR, this option
 	  has no effect. If your VM does not support PFAULT, PAGEEX
 	  pseudo page fault handling will be used.
 	  Note that VM 4.2 supports PFAULT but has a bug in its
 	  implementation that causes some problems.
 	  Everybody who wants to run Linux under VM != VM4.2 should select
 	  this option.

 config SHARED_KERNEL
 	bool "VM shared kernel support"
 	help
 	  Select this option, if you want to share the text segment of the
 	  Linux kernel between different VM guests. This reduces memory
 	  usage with lots of guests but greatly increases kernel size.
 	  Also if a kernel was IPL'ed from a shared segment the kexec system
 	  call will not work.
 	  You should only select this option if you know what you are
 	  doing and want to exploit this feature.

 config CMM
 	tristate "Cooperative memory management"
 	help
 	  Select this option, if you want to enable the kernel interface
 	  to reduce the memory size of the system. This is accomplished
 	  by allocating pages of memory and put them "on hold". This only
 	  makes sense for a system running under VM where the unused pages
 	  will be reused by VM for other guest systems. The interface
 	  allows an external monitor to balance memory of many systems.
 	  Everybody who wants to run Linux under VM should select this
 	  option.

 config CMM_PROC
 	bool "/proc interface to cooperative memory management"
 	depends on CMM
 	help
 	  Select this option to enable the /proc interface to the
 	  cooperative memory management.

 config CMM_IUCV
 	bool "IUCV special message interface to cooperative memory management"
 	depends on CMM && (SMSGIUCV=y || CMM=SMSGIUCV)
 	help
 	  Select this option to enable the special message interface to
 	  the cooperative memory management.

 config PAGE_STATES
 	bool "Unused page notification"
 	help
 	  This enables the notification of unused pages to the
 	  hypervisor. The ESSA instruction is used to do the states
 	  changes between a page that has content and the unused state.

 config VIRT_TIMER
 	bool "Virtual CPU timer support"
 	help
 	  This provides a kernel interface for virtual CPU timers.
 	  Default is disabled.

 config VIRT_CPU_ACCOUNTING
 	bool "Base user process accounting on virtual cpu timer"
 	depends on VIRT_TIMER
 	help
 	  Select this option to use CPU timer deltas to do user
 	  process accounting.

 config APPLDATA_BASE
 	bool "Linux - VM Monitor Stream, base infrastructure"
 	depends on PROC_FS && VIRT_TIMER=y
 	help
 	  This provides a kernel interface for creating and updating z/VM APPLDATA
 	  monitor records. The monitor records are updated at certain time
 	  intervals, once the timer is started.
 	  Writing 1 or 0 to /proc/appldata/timer starts(1) or stops(0) the timer,
 	  i.e. enables or disables monitoring on the Linux side.
 	  A custom interval value (in seconds) can be written to
 	  /proc/appldata/interval.

 	  Defaults are 60 seconds interval and timer off.
 	  The /proc entries can also be read from, showing the current settings.

 config APPLDATA_MEM
 	tristate "Monitor memory management statistics"
 	depends on APPLDATA_BASE && VM_EVENT_COUNTERS
 	help
 	  This provides memory management related data to the Linux - VM Monitor
 	  Stream, like paging/swapping rate, memory utilisation, etc.
 	  Writing 1 or 0 to /proc/appldata/memory creates(1) or removes(0) a z/VM
 	  APPLDATA monitor record, i.e. enables or disables monitoring this record
 	  on the z/VM side.

 	  Default is disabled.
 	  The /proc entry can also be read from, showing the current settings.

 	  This can also be compiled as a module, which will be called
 	  appldata_mem.o.

 config APPLDATA_OS
 	tristate "Monitor OS statistics"
 	depends on APPLDATA_BASE
 	help
 	  This provides OS related data to the Linux - VM Monitor Stream, like
 	  CPU utilisation, etc.
 	  Writing 1 or 0 to /proc/appldata/os creates(1) or removes(0) a z/VM
 	  APPLDATA monitor record, i.e. enables or disables monitoring this record
 	  on the z/VM side.

 	  Default is disabled.
 	  This can also be compiled as a module, which will be called
 	  appldata_os.o.

 config APPLDATA_NET_SUM
 	tristate "Monitor overall network statistics"
 	depends on APPLDATA_BASE
 	help
 	  This provides network related data to the Linux - VM Monitor Stream,
 	  currently there is only a total sum of network I/O statistics, no
 	  per-interface data.
 	  Writing 1 or 0 to /proc/appldata/net_sum creates(1) or removes(0) a z/VM
 	  APPLDATA monitor record, i.e. enables or disables monitoring this record
 	  on the z/VM side.

 	  Default is disabled.
 	  This can also be compiled as a module, which will be called
 	  appldata_net_sum.o.

 source kernel/Kconfig.hz

 config S390_HYPFS_FS
 	bool "s390 hypervisor file system support"
 	select SYS_HYPERVISOR
 	default y
 	help
 	  This is a virtual file system intended to provide accounting
 	  information in an s390 hypervisor environment.

 config KEXEC
 	bool "kexec system call"
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot
 	  but is independent of hardware/microcode support.

 config ZFCPDUMP
 	tristate "zfcpdump support"
 	select SMP
 	default n
 	help
 	  Select this option if you want to build an zfcpdump enabled kernel.
 	  Refer to <file:Documentation/s390/zfcpdump.txt> for more details on this.

 config S390_GUEST
 bool "s390 guest support (EXPERIMENTAL)"
 	depends on 64BIT && EXPERIMENTAL
 	select VIRTIO
 	select VIRTIO_RING
 	help
 	  Select this option if you want to run the kernel under s390 linux
 endmenu

 source "net/Kconfig"

 config PCMCIA
 	def_bool n

 config CCW
 	def_bool y

 source "drivers/Kconfig"

 source "fs/Kconfig"

 source "arch/s390/Kconfig.debug"

 source "security/Kconfig"

 source "crypto/Kconfig"

 source "lib/Kconfig"

 source "arch/s390/kvm/Kconfig"
	#
	# For a description of the syntax of this configuration file,
	# see Documentation/kbuild/kconfig-language.txt.
	#

	config SCHED_MC
	def_bool y
	depends on SMP

	config MMU
	def_bool y

	config ZONE_DMA
	def_bool y
	depends on 64BIT

	config LOCKDEP_SUPPORT
	def_bool y

	config STACKTRACE_SUPPORT
	def_bool y

	config HAVE_LATENCYTOP_SUPPORT
	def_bool y

	config RWSEM_GENERIC_SPINLOCK
	bool

	config RWSEM_XCHGADD_ALGORITHM
	def_bool y

	config ARCH_HAS_ILOG2_U32
	bool
	default n

	config ARCH_HAS_ILOG2_U64
	bool
	default n

	config GENERIC_HWEIGHT
	def_bool y

	config GENERIC_TIME
	def_bool y

	config GENERIC_CLOCKEVENTS
	def_bool y

	config GENERIC_BUG
	bool
	depends on BUG
	default y

	config NO_IOMEM
	def_bool y

	config NO_DMA
	def_bool y

	config GENERIC_LOCKBREAK
	bool
	default y
	depends on SMP && PREEMPT

	config PGSTE
	bool
	default y if KVM

	mainmenu "Linux Kernel Configuration"

	config S390
	def_bool y
	select HAVE_OPROFILE
	select HAVE_KPROBES
	select HAVE_KRETPROBES
	select HAVE_KVM if 64BIT

	source "init/Kconfig"

	menu "Base setup"

	comment "Processor type and features"

	source "kernel/time/Kconfig"

	config 64BIT
	bool "64 bit kernel"
	help
	Select this option if you have a 64 bit IBM zSeries machine
	and want to use the 64 bit addressing mode.

	config 32BIT
	bool
	default y if !64BIT

	config SMP
	bool "Symmetric multi-processing support"
	---help---
	This enables support for systems with more than one CPU. If you have
	a system with only one CPU, like most personal computers, say N. If
	you have a system with more than one CPU, say Y.

	If you say N here, the kernel will run on single and multiprocessor
	machines, but will use only one CPU of a multiprocessor machine. If
	you say Y here, the kernel will run on many, but not all,
	singleprocessor machines. On a singleprocessor machine, the kernel
	will run faster if you say N here.

	See also the SMP-HOWTO available at
	<http://www.tldp.org/docs.html#howto>.

	Even if you don't know what to do here, say Y.

	config NR_CPUS
	int "Maximum number of CPUs (2-64)"
	range 2 64
	depends on SMP
	default "32" if !64BIT
	default "64" if 64BIT
	help
	This allows you to specify the maximum number of CPUs which this
	kernel will support. The maximum supported value is 64 and the
	minimum value which makes sense is 2.

	This is purely to save memory - each supported CPU adds
	approximately sixteen kilobytes to the kernel image.

	config HOTPLUG_CPU
	bool "Support for hot-pluggable CPUs"
	depends on SMP
	select HOTPLUG
	default n
	help
	Say Y here to be able to turn CPUs off and on. CPUs
	can be controlled through /sys/devices/system/cpu/cpu#.
	Say N if you want to disable CPU hotplug.

	config MATHEMU
	bool "IEEE FPU emulation"
	depends on MARCH_G5
	help
	This option is required for IEEE compliant floating point arithmetic
	on older S/390 machines. Say Y unless you know your machine doesn't
	need this.

	config COMPAT
	bool "Kernel support for 31 bit emulation"
	depends on 64BIT
	help
	Select this option if you want to enable your system kernel to
	handle system-calls from ELF binaries for 31 bit ESA. This option
	(and some other stuff like libraries and such) is needed for
	executing 31 bit applications. It is safe to say "Y".

	config SYSVIPC_COMPAT
	bool
	depends on COMPAT && SYSVIPC
	default y

	config AUDIT_ARCH
	bool
	default y

	config S390_SWITCH_AMODE
	bool "Switch kernel/user addressing modes"
	help
	This option allows to switch the addressing modes of kernel and user
	space. The kernel parameter switch_amode=on will enable this feature,
	default is disabled. Enabling this (via kernel parameter) on machines
	earlier than IBM System z9-109 EC/BC will reduce system performance.

	Note that this option will also be selected by selecting the execute
	protection option below. Enabling the execute protection via the
	noexec kernel parameter will also switch the addressing modes,
	independent of the switch_amode kernel parameter.


	config S390_EXEC_PROTECT
	bool "Data execute protection"
	select S390_SWITCH_AMODE
	help
	This option allows to enable a buffer overflow protection for user
	space programs and it also selects the addressing mode option above.
	The kernel parameter noexec=on will enable this feature and also
	switch the addressing modes, default is disabled. Enabling this (via
	kernel parameter) on machines earlier than IBM System z9-109 EC/BC
	will reduce system performance.

	comment "Code generation options"

	choice
	prompt "Processor type"
	default MARCH_G5

	config MARCH_G5
	bool "S/390 model G5 and G6"
	depends on !64BIT
	help
	Select this to build a 31 bit kernel that works
	on all S/390 and zSeries machines.

	config MARCH_Z900
	bool "IBM eServer zSeries model z800 and z900"
	help
	Select this to optimize for zSeries machines. This
	will enable some optimizations that are not available
	on older 31 bit only CPUs.

	config MARCH_Z990
	bool "IBM eServer zSeries model z890 and z990"
	help
	Select this enable optimizations for model z890/z990.
	This will be slightly faster but does not work on
	older machines such as the z900.

	config MARCH_Z9_109
	bool "IBM System z9"
	help
	Select this to enable optimizations for IBM System z9-109, IBM
	System z9 Enterprise Class (z9 EC), and IBM System z9 Business
	Class (z9 BC). The kernel will be slightly faster but will not
	work on older machines such as the z990, z890, z900, and z800.

	endchoice

	config PACK_STACK
	bool "Pack kernel stack"
	help
	This option enables the compiler option -mkernel-backchain if it
	is available. If the option is available the compiler supports
	the new stack layout which dramatically reduces the minimum stack
	frame size. With an old compiler a non-leaf function needs a
	minimum of 96 bytes on 31 bit and 160 bytes on 64 bit. With
	-mkernel-backchain the minimum size drops to 16 byte on 31 bit
	and 24 byte on 64 bit.

	Say Y if you are unsure.

	config SMALL_STACK
	bool "Use 4kb/8kb for kernel stack instead of 8kb/16kb"
	depends on PACK_STACK && !LOCKDEP
	help
	If you say Y here and the compiler supports the -mkernel-backchain
	option the kernel will use a smaller kernel stack size. For 31 bit
	the reduced size is 4kb instead of 8kb and for 64 bit it is 8kb
	instead of 16kb. This allows to run more thread on a system and
	reduces the pressure on the memory management for higher order
	page allocations.

	Say N if you are unsure.


	config CHECK_STACK
	bool "Detect kernel stack overflow"
	help
	This option enables the compiler option -mstack-guard and
	-mstack-size if they are available. If the compiler supports them
	it will emit additional code to each function prolog to trigger
	an illegal operation if the kernel stack is about to overflow.

	Say N if you are unsure.

	config STACK_GUARD
	int "Size of the guard area (128-1024)"
	range 128 1024
	depends on CHECK_STACK
	default "256"
	help
	This allows you to specify the size of the guard area at the lower
	end of the kernel stack. If the kernel stack points into the guard
	area on function entry an illegal operation is triggered. The size
	needs to be a power of 2. Please keep in mind that the size of an
	interrupt frame is 184 bytes for 31 bit and 328 bytes on 64 bit.
	The minimum size for the stack guard should be 256 for 31 bit and
	512 for 64 bit.

	config WARN_STACK
	bool "Emit compiler warnings for function with broken stack usage"
	help
	This option enables the compiler options -mwarn-framesize and
	-mwarn-dynamicstack. If the compiler supports these options it
	will generate warnings for function which either use alloca or
	create a stack frame bigger then CONFIG_WARN_STACK_SIZE.

	Say N if you are unsure.

	config WARN_STACK_SIZE
	int "Maximum frame size considered safe (128-2048)"
	range 128 2048
	depends on WARN_STACK
	default "256"
	help
	This allows you to specify the maximum frame size a function may
	have without the compiler complaining about it.

	config ARCH_POPULATES_NODE_MAP
	def_bool y

	comment "Kernel preemption"

	source "kernel/Kconfig.preempt"

	config ARCH_SPARSEMEM_ENABLE
	def_bool y
	select SPARSEMEM_VMEMMAP_ENABLE
	select SPARSEMEM_VMEMMAP

	config ARCH_SPARSEMEM_DEFAULT
	def_bool y

	config ARCH_SELECT_MEMORY_MODEL
	def_bool y

	source "mm/Kconfig"

	comment "I/O subsystem configuration"

	config MACHCHK_WARNING
	bool "Process warning machine checks"
	help
	Select this option if you want the machine check handler on IBM S/390 or
	zSeries to process warning machine checks (e.g. on power failures).
	If unsure, say "Y".

	config QDIO
	tristate "QDIO support"
	---help---
	This driver provides the Queued Direct I/O base support for
	IBM System z.

	To compile this driver as a module, choose M here: the
	module will be called qdio.

	If unsure, say Y.

	config QDIO_DEBUG
	bool "Extended debugging information"
	depends on QDIO
	help
	Say Y here to get extended debugging output in
	/sys/kernel/debug/s390dbf/qdio...
	Warning: this option reduces the performance of the QDIO module.

	If unsure, say N.

	comment "Misc"

	config IPL
	bool "Builtin IPL record support"
	help
	If you want to use the produced kernel to IPL directly from a
	device, you have to merge a bootsector specific to the device
	into the first bytes of the kernel. You will have to select the
	IPL device.

	choice
	prompt "IPL method generated into head.S"
	depends on IPL
	default IPL_TAPE
	help
	Select "tape" if you want to IPL the image from a Tape.

	Select "vm_reader" if you are running under VM/ESA and want
	to IPL the image from the emulated card reader.

	config IPL_TAPE
	bool "tape"

	config IPL_VM
	bool "vm_reader"

	endchoice

	source "fs/Kconfig.binfmt"

	config FORCE_MAX_ZONEORDER
	int
	default "9"

	config PROCESS_DEBUG
	bool "Show crashed user process info"
	help
	Say Y to print all process fault locations to the console. This is
	a debugging option; you probably do not want to set it unless you
	are an S390 port maintainer.

	config PFAULT
	bool "Pseudo page fault support"
	help
	Select this option, if you want to use PFAULT pseudo page fault
	handling under VM. If running native or in LPAR, this option
	has no effect. If your VM does not support PFAULT, PAGEEX
	pseudo page fault handling will be used.
	Note that VM 4.2 supports PFAULT but has a bug in its
	implementation that causes some problems.
	Everybody who wants to run Linux under VM != VM4.2 should select
	this option.

	config SHARED_KERNEL
	bool "VM shared kernel support"
	help
	Select this option, if you want to share the text segment of the
	Linux kernel between different VM guests. This reduces memory
	usage with lots of guests but greatly increases kernel size.
	Also if a kernel was IPL'ed from a shared segment the kexec system
	call will not work.
	You should only select this option if you know what you are
	doing and want to exploit this feature.

	config CMM
	tristate "Cooperative memory management"
	help
	Select this option, if you want to enable the kernel interface
	to reduce the memory size of the system. This is accomplished
	by allocating pages of memory and put them "on hold". This only
	makes sense for a system running under VM where the unused pages
	will be reused by VM for other guest systems. The interface
	allows an external monitor to balance memory of many systems.
	Everybody who wants to run Linux under VM should select this
	option.

	config CMM_PROC
	bool "/proc interface to cooperative memory management"
	depends on CMM
	help
	Select this option to enable the /proc interface to the
	cooperative memory management.

	config CMM_IUCV
	bool "IUCV special message interface to cooperative memory management"
	depends on CMM && (SMSGIUCV=y \|\| CMM=SMSGIUCV)
	help
	Select this option to enable the special message interface to
	the cooperative memory management.

	config PAGE_STATES
	bool "Unused page notification"
	help
	This enables the notification of unused pages to the
	hypervisor. The ESSA instruction is used to do the states
	changes between a page that has content and the unused state.

	config VIRT_TIMER
	bool "Virtual CPU timer support"
	help
	This provides a kernel interface for virtual CPU timers.
	Default is disabled.

	config VIRT_CPU_ACCOUNTING
	bool "Base user process accounting on virtual cpu timer"
	depends on VIRT_TIMER
	help
	Select this option to use CPU timer deltas to do user
	process accounting.

	config APPLDATA_BASE
	bool "Linux - VM Monitor Stream, base infrastructure"
	depends on PROC_FS && VIRT_TIMER=y
	help
	This provides a kernel interface for creating and updating z/VM APPLDATA
	monitor records. The monitor records are updated at certain time
	intervals, once the timer is started.
	Writing 1 or 0 to /proc/appldata/timer starts(1) or stops(0) the timer,
	i.e. enables or disables monitoring on the Linux side.
	A custom interval value (in seconds) can be written to
	/proc/appldata/interval.

	Defaults are 60 seconds interval and timer off.
	The /proc entries can also be read from, showing the current settings.

	config APPLDATA_MEM
	tristate "Monitor memory management statistics"
	depends on APPLDATA_BASE && VM_EVENT_COUNTERS
	help
	This provides memory management related data to the Linux - VM Monitor
	Stream, like paging/swapping rate, memory utilisation, etc.
	Writing 1 or 0 to /proc/appldata/memory creates(1) or removes(0) a z/VM
	APPLDATA monitor record, i.e. enables or disables monitoring this record
	on the z/VM side.

	Default is disabled.
	The /proc entry can also be read from, showing the current settings.

	This can also be compiled as a module, which will be called
	appldata_mem.o.

	config APPLDATA_OS
	tristate "Monitor OS statistics"
	depends on APPLDATA_BASE
	help
	This provides OS related data to the Linux - VM Monitor Stream, like
	CPU utilisation, etc.
	Writing 1 or 0 to /proc/appldata/os creates(1) or removes(0) a z/VM
	APPLDATA monitor record, i.e. enables or disables monitoring this record
	on the z/VM side.

	Default is disabled.
	This can also be compiled as a module, which will be called
	appldata_os.o.

	config APPLDATA_NET_SUM
	tristate "Monitor overall network statistics"
	depends on APPLDATA_BASE
	help
	This provides network related data to the Linux - VM Monitor Stream,
	currently there is only a total sum of network I/O statistics, no
	per-interface data.
	Writing 1 or 0 to /proc/appldata/net_sum creates(1) or removes(0) a z/VM
	APPLDATA monitor record, i.e. enables or disables monitoring this record
	on the z/VM side.

	Default is disabled.
	This can also be compiled as a module, which will be called
	appldata_net_sum.o.

	source kernel/Kconfig.hz

	config S390_HYPFS_FS
	bool "s390 hypervisor file system support"
	select SYS_HYPERVISOR
	default y
	help
	This is a virtual file system intended to provide accounting
	information in an s390 hypervisor environment.

	config KEXEC
	bool "kexec system call"
	help
	kexec is a system call that implements the ability to shutdown your
	current kernel, and to start another kernel. It is like a reboot
	but is independent of hardware/microcode support.

	config ZFCPDUMP
	tristate "zfcpdump support"
	select SMP
	default n
	help
	Select this option if you want to build an zfcpdump enabled kernel.
	Refer to <file:Documentation/s390/zfcpdump.txt> for more details on this.

	config S390_GUEST
	bool "s390 guest support (EXPERIMENTAL)"
	depends on 64BIT && EXPERIMENTAL
	select VIRTIO
	select VIRTIO_RING
	help
	Select this option if you want to run the kernel under s390 linux
	endmenu

	source "net/Kconfig"

	config PCMCIA
	def_bool n

	config CCW
	def_bool y

	source "drivers/Kconfig"

	source "fs/Kconfig"

	source "arch/s390/Kconfig.debug"

	source "security/Kconfig"

	source "crypto/Kconfig"

	source "lib/Kconfig"

	source "arch/s390/kvm/Kconfig"