mac80211: split off channel switch parsing function
The channel switch parsing function can be re-used for the IBSS code,
put the common part into an extra function.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
[also move/rename chandef_downgrade]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index d353c64..7f0e6da 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1480,6 +1480,29 @@
void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata,
struct ieee80211_mgmt *mgmt,
size_t len);
+/**
+ * ieee80211_parse_ch_switch_ie - parses channel switch IEs
+ * @sdata: the sdata of the interface which has received the frame
+ * @elems: parsed 802.11 elements received with the frame
+ * @beacon: indicates if the frame was a beacon or probe response
+ * @current_band: indicates the current band
+ * @sta_flags: contains information about own capabilities and restrictions
+ * to decide which channel switch announcements can be accepted. Only the
+ * following subset of &enum ieee80211_sta_flags are evaluated:
+ * %IEEE80211_STA_DISABLE_HT, %IEEE80211_STA_DISABLE_VHT,
+ * %IEEE80211_STA_DISABLE_40MHZ, %IEEE80211_STA_DISABLE_80P80MHZ,
+ * %IEEE80211_STA_DISABLE_160MHZ.
+ * @count: to be filled with the counter until the switch (on success only)
+ * @bssid: the currently connected bssid (for reporting)
+ * @mode: to be filled with CSA mode (on success only)
+ * @new_chandef: to be filled with destination chandef (on success only)
+ * Return: 0 on success, <0 on error and >0 if there is nothing to parse.
+ */
+int ieee80211_parse_ch_switch_ie(struct ieee80211_sub_if_data *sdata,
+ struct ieee802_11_elems *elems, bool beacon,
+ enum ieee80211_band current_band,
+ u32 sta_flags, u8 *bssid, u8 *count, u8 *mode,
+ struct cfg80211_chan_def *new_chandef);
/* Suspend/resume and hw reconfiguration */
int ieee80211_reconfig(struct ieee80211_local *local);
@@ -1653,6 +1676,7 @@
void ieee80211_ht_oper_to_chandef(struct ieee80211_channel *control_chan,
const struct ieee80211_ht_operation *ht_oper,
struct cfg80211_chan_def *chandef);
+u32 ieee80211_chandef_downgrade(struct cfg80211_chan_def *c);
int __must_check
ieee80211_vif_use_channel(struct ieee80211_sub_if_data *sdata,
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index e396a2a..9fce0f49 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -145,66 +145,6 @@
return (1 << ecw) - 1;
}
-static u32 chandef_downgrade(struct cfg80211_chan_def *c)
-{
- u32 ret;
- int tmp;
-
- switch (c->width) {
- case NL80211_CHAN_WIDTH_20:
- c->width = NL80211_CHAN_WIDTH_20_NOHT;
- ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
- break;
- case NL80211_CHAN_WIDTH_40:
- c->width = NL80211_CHAN_WIDTH_20;
- c->center_freq1 = c->chan->center_freq;
- ret = IEEE80211_STA_DISABLE_40MHZ |
- IEEE80211_STA_DISABLE_VHT;
- break;
- case NL80211_CHAN_WIDTH_80:
- tmp = (30 + c->chan->center_freq - c->center_freq1)/20;
- /* n_P40 */
- tmp /= 2;
- /* freq_P40 */
- c->center_freq1 = c->center_freq1 - 20 + 40 * tmp;
- c->width = NL80211_CHAN_WIDTH_40;
- ret = IEEE80211_STA_DISABLE_VHT;
- break;
- case NL80211_CHAN_WIDTH_80P80:
- c->center_freq2 = 0;
- c->width = NL80211_CHAN_WIDTH_80;
- ret = IEEE80211_STA_DISABLE_80P80MHZ |
- IEEE80211_STA_DISABLE_160MHZ;
- break;
- case NL80211_CHAN_WIDTH_160:
- /* n_P20 */
- tmp = (70 + c->chan->center_freq - c->center_freq1)/20;
- /* n_P80 */
- tmp /= 4;
- c->center_freq1 = c->center_freq1 - 40 + 80 * tmp;
- c->width = NL80211_CHAN_WIDTH_80;
- ret = IEEE80211_STA_DISABLE_80P80MHZ |
- IEEE80211_STA_DISABLE_160MHZ;
- break;
- default:
- case NL80211_CHAN_WIDTH_20_NOHT:
- WARN_ON_ONCE(1);
- c->width = NL80211_CHAN_WIDTH_20_NOHT;
- ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
- break;
- case NL80211_CHAN_WIDTH_5:
- case NL80211_CHAN_WIDTH_10:
- WARN_ON_ONCE(1);
- /* keep c->width */
- ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
- break;
- }
-
- WARN_ON_ONCE(!cfg80211_chandef_valid(c));
-
- return ret;
-}
-
static u32
ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
struct ieee80211_supported_band *sband,
@@ -352,7 +292,7 @@
break;
}
- ret |= chandef_downgrade(chandef);
+ ret |= ieee80211_chandef_downgrade(chandef);
}
if (chandef->width != vht_chandef.width && !tracking)
@@ -406,13 +346,13 @@
*/
if (ifmgd->flags & IEEE80211_STA_DISABLE_80P80MHZ &&
chandef.width == NL80211_CHAN_WIDTH_80P80)
- flags |= chandef_downgrade(&chandef);
+ flags |= ieee80211_chandef_downgrade(&chandef);
if (ifmgd->flags & IEEE80211_STA_DISABLE_160MHZ &&
chandef.width == NL80211_CHAN_WIDTH_160)
- flags |= chandef_downgrade(&chandef);
+ flags |= ieee80211_chandef_downgrade(&chandef);
if (ifmgd->flags & IEEE80211_STA_DISABLE_40MHZ &&
chandef.width > NL80211_CHAN_WIDTH_20)
- flags |= chandef_downgrade(&chandef);
+ flags |= ieee80211_chandef_downgrade(&chandef);
if (cfg80211_chandef_identical(&chandef, &sdata->vif.bss_conf.chandef))
return 0;
@@ -999,20 +939,12 @@
struct ieee80211_local *local = sdata->local;
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
struct cfg80211_bss *cbss = ifmgd->associated;
- struct ieee80211_bss *bss;
struct ieee80211_chanctx *chanctx;
- enum ieee80211_band new_band;
- int new_freq;
- u8 new_chan_no;
+ enum ieee80211_band current_band;
u8 count;
u8 mode;
- struct ieee80211_channel *new_chan;
struct cfg80211_chan_def new_chandef = {};
- struct cfg80211_chan_def new_vht_chandef = {};
- const struct ieee80211_sec_chan_offs_ie *sec_chan_offs;
- const struct ieee80211_wide_bw_chansw_ie *wide_bw_chansw_ie;
- const struct ieee80211_ht_operation *ht_oper;
- int secondary_channel_offset = -1;
+ int res;
sdata_assert_lock(sdata);
@@ -1026,162 +958,23 @@
if (ifmgd->flags & IEEE80211_STA_CSA_RECEIVED)
return;
- sec_chan_offs = elems->sec_chan_offs;
- wide_bw_chansw_ie = elems->wide_bw_chansw_ie;
- ht_oper = elems->ht_operation;
-
- if (ifmgd->flags & (IEEE80211_STA_DISABLE_HT |
- IEEE80211_STA_DISABLE_40MHZ)) {
- sec_chan_offs = NULL;
- wide_bw_chansw_ie = NULL;
- /* only used for bandwidth here */
- ht_oper = NULL;
- }
-
- if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT)
- wide_bw_chansw_ie = NULL;
-
- if (elems->ext_chansw_ie) {
- if (!ieee80211_operating_class_to_band(
- elems->ext_chansw_ie->new_operating_class,
- &new_band)) {
- sdata_info(sdata,
- "cannot understand ECSA IE operating class %d, disconnecting\n",
- elems->ext_chansw_ie->new_operating_class);
- ieee80211_queue_work(&local->hw,
- &ifmgd->csa_connection_drop_work);
- }
- new_chan_no = elems->ext_chansw_ie->new_ch_num;
- count = elems->ext_chansw_ie->count;
- mode = elems->ext_chansw_ie->mode;
- } else if (elems->ch_switch_ie) {
- new_band = cbss->channel->band;
- new_chan_no = elems->ch_switch_ie->new_ch_num;
- count = elems->ch_switch_ie->count;
- mode = elems->ch_switch_ie->mode;
- } else {
- /* nothing here we understand */
- return;
- }
-
- bss = (void *)cbss->priv;
-
- new_freq = ieee80211_channel_to_frequency(new_chan_no, new_band);
- new_chan = ieee80211_get_channel(sdata->local->hw.wiphy, new_freq);
- if (!new_chan || new_chan->flags & IEEE80211_CHAN_DISABLED) {
- sdata_info(sdata,
- "AP %pM switches to unsupported channel (%d MHz), disconnecting\n",
- ifmgd->associated->bssid, new_freq);
+ current_band = cbss->channel->band;
+ res = ieee80211_parse_ch_switch_ie(sdata, elems, beacon, current_band,
+ ifmgd->flags,
+ ifmgd->associated->bssid, &count,
+ &mode, &new_chandef);
+ if (res < 0)
ieee80211_queue_work(&local->hw,
&ifmgd->csa_connection_drop_work);
+ if (res)
return;
- }
-
- if (!beacon && sec_chan_offs) {
- secondary_channel_offset = sec_chan_offs->sec_chan_offs;
- } else if (beacon && ht_oper) {
- secondary_channel_offset =
- ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET;
- } else if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) {
- /*
- * If it's not a beacon, HT is enabled and the IE not present,
- * it's 20 MHz, 802.11-2012 8.5.2.6:
- * This element [the Secondary Channel Offset Element] is
- * present when switching to a 40 MHz channel. It may be
- * present when switching to a 20 MHz channel (in which
- * case the secondary channel offset is set to SCN).
- */
- secondary_channel_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE;
- }
-
- switch (secondary_channel_offset) {
- default:
- /* secondary_channel_offset was present but is invalid */
- case IEEE80211_HT_PARAM_CHA_SEC_NONE:
- cfg80211_chandef_create(&new_chandef, new_chan,
- NL80211_CHAN_HT20);
- break;
- case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
- cfg80211_chandef_create(&new_chandef, new_chan,
- NL80211_CHAN_HT40PLUS);
- break;
- case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
- cfg80211_chandef_create(&new_chandef, new_chan,
- NL80211_CHAN_HT40MINUS);
- break;
- case -1:
- cfg80211_chandef_create(&new_chandef, new_chan,
- NL80211_CHAN_NO_HT);
- /* keep width for 5/10 MHz channels */
- switch (sdata->vif.bss_conf.chandef.width) {
- case NL80211_CHAN_WIDTH_5:
- case NL80211_CHAN_WIDTH_10:
- new_chandef.width = sdata->vif.bss_conf.chandef.width;
- break;
- default:
- break;
- }
- break;
- }
-
- if (wide_bw_chansw_ie) {
- new_vht_chandef.chan = new_chan;
- new_vht_chandef.center_freq1 =
- ieee80211_channel_to_frequency(
- wide_bw_chansw_ie->new_center_freq_seg0,
- new_band);
-
- switch (wide_bw_chansw_ie->new_channel_width) {
- default:
- /* hmmm, ignore VHT and use HT if present */
- case IEEE80211_VHT_CHANWIDTH_USE_HT:
- new_vht_chandef.chan = NULL;
- break;
- case IEEE80211_VHT_CHANWIDTH_80MHZ:
- new_vht_chandef.width = NL80211_CHAN_WIDTH_80;
- break;
- case IEEE80211_VHT_CHANWIDTH_160MHZ:
- new_vht_chandef.width = NL80211_CHAN_WIDTH_160;
- break;
- case IEEE80211_VHT_CHANWIDTH_80P80MHZ:
- /* field is otherwise reserved */
- new_vht_chandef.center_freq2 =
- ieee80211_channel_to_frequency(
- wide_bw_chansw_ie->new_center_freq_seg1,
- new_band);
- new_vht_chandef.width = NL80211_CHAN_WIDTH_80P80;
- break;
- }
- if (ifmgd->flags & IEEE80211_STA_DISABLE_80P80MHZ &&
- new_vht_chandef.width == NL80211_CHAN_WIDTH_80P80)
- chandef_downgrade(&new_vht_chandef);
- if (ifmgd->flags & IEEE80211_STA_DISABLE_160MHZ &&
- new_vht_chandef.width == NL80211_CHAN_WIDTH_160)
- chandef_downgrade(&new_vht_chandef);
- if (ifmgd->flags & IEEE80211_STA_DISABLE_40MHZ &&
- new_vht_chandef.width > NL80211_CHAN_WIDTH_20)
- chandef_downgrade(&new_vht_chandef);
- }
-
- /* if VHT data is there validate & use it */
- if (new_vht_chandef.chan) {
- if (!cfg80211_chandef_compatible(&new_vht_chandef,
- &new_chandef)) {
- sdata_info(sdata,
- "AP %pM CSA has inconsistent channel data, disconnecting\n",
- ifmgd->associated->bssid);
- ieee80211_queue_work(&local->hw,
- &ifmgd->csa_connection_drop_work);
- return;
- }
- new_chandef = new_vht_chandef;
- }
if (!cfg80211_chandef_usable(local->hw.wiphy, &new_chandef,
IEEE80211_CHAN_DISABLED)) {
sdata_info(sdata,
"AP %pM switches to unsupported channel (%d MHz, width:%d, CF1/2: %d/%d MHz), disconnecting\n",
- ifmgd->associated->bssid, new_freq,
+ ifmgd->associated->bssid,
+ new_chandef.chan->center_freq,
new_chandef.width, new_chandef.center_freq1,
new_chandef.center_freq2);
ieee80211_queue_work(&local->hw,
@@ -3856,7 +3649,7 @@
return ret;
while (ret && chandef.width != NL80211_CHAN_WIDTH_20_NOHT) {
- ifmgd->flags |= chandef_downgrade(&chandef);
+ ifmgd->flags |= ieee80211_chandef_downgrade(&chandef);
ret = ieee80211_vif_use_channel(sdata, &chandef,
IEEE80211_CHANCTX_SHARED);
}
diff --git a/net/mac80211/spectmgmt.c b/net/mac80211/spectmgmt.c
index 578eea3..921597e 100644
--- a/net/mac80211/spectmgmt.c
+++ b/net/mac80211/spectmgmt.c
@@ -21,6 +21,168 @@
#include "sta_info.h"
#include "wme.h"
+int ieee80211_parse_ch_switch_ie(struct ieee80211_sub_if_data *sdata,
+ struct ieee802_11_elems *elems, bool beacon,
+ enum ieee80211_band current_band,
+ u32 sta_flags, u8 *bssid, u8 *count, u8 *mode,
+ struct cfg80211_chan_def *new_chandef)
+{
+ enum ieee80211_band new_band;
+ int new_freq;
+ u8 new_chan_no;
+ struct ieee80211_channel *new_chan;
+ struct cfg80211_chan_def new_vht_chandef = {};
+ const struct ieee80211_sec_chan_offs_ie *sec_chan_offs;
+ const struct ieee80211_wide_bw_chansw_ie *wide_bw_chansw_ie;
+ const struct ieee80211_ht_operation *ht_oper;
+ int secondary_channel_offset = -1;
+
+ sec_chan_offs = elems->sec_chan_offs;
+ wide_bw_chansw_ie = elems->wide_bw_chansw_ie;
+ ht_oper = elems->ht_operation;
+
+ if (sta_flags & (IEEE80211_STA_DISABLE_HT |
+ IEEE80211_STA_DISABLE_40MHZ)) {
+ sec_chan_offs = NULL;
+ wide_bw_chansw_ie = NULL;
+ /* only used for bandwidth here */
+ ht_oper = NULL;
+ }
+
+ if (sta_flags & IEEE80211_STA_DISABLE_VHT)
+ wide_bw_chansw_ie = NULL;
+
+ if (elems->ext_chansw_ie) {
+ if (!ieee80211_operating_class_to_band(
+ elems->ext_chansw_ie->new_operating_class,
+ &new_band)) {
+ sdata_info(sdata,
+ "cannot understand ECSA IE operating class %d, disconnecting\n",
+ elems->ext_chansw_ie->new_operating_class);
+ return -EINVAL;
+ }
+ new_chan_no = elems->ext_chansw_ie->new_ch_num;
+ *count = elems->ext_chansw_ie->count;
+ *mode = elems->ext_chansw_ie->mode;
+ } else if (elems->ch_switch_ie) {
+ new_band = current_band;
+ new_chan_no = elems->ch_switch_ie->new_ch_num;
+ *count = elems->ch_switch_ie->count;
+ *mode = elems->ch_switch_ie->mode;
+ } else {
+ /* nothing here we understand */
+ return 1;
+ }
+
+ new_freq = ieee80211_channel_to_frequency(new_chan_no, new_band);
+ new_chan = ieee80211_get_channel(sdata->local->hw.wiphy, new_freq);
+ if (!new_chan || new_chan->flags & IEEE80211_CHAN_DISABLED) {
+ sdata_info(sdata,
+ "BSS %pM switches to unsupported channel (%d MHz), disconnecting\n",
+ bssid, new_freq);
+ return -EINVAL;
+ }
+
+ if (!beacon && sec_chan_offs) {
+ secondary_channel_offset = sec_chan_offs->sec_chan_offs;
+ } else if (beacon && ht_oper) {
+ secondary_channel_offset =
+ ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET;
+ } else if (!(sta_flags & IEEE80211_STA_DISABLE_HT)) {
+ /* If it's not a beacon, HT is enabled and the IE not present,
+ * it's 20 MHz, 802.11-2012 8.5.2.6:
+ * This element [the Secondary Channel Offset Element] is
+ * present when switching to a 40 MHz channel. It may be
+ * present when switching to a 20 MHz channel (in which
+ * case the secondary channel offset is set to SCN).
+ */
+ secondary_channel_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE;
+ }
+
+ switch (secondary_channel_offset) {
+ default:
+ /* secondary_channel_offset was present but is invalid */
+ case IEEE80211_HT_PARAM_CHA_SEC_NONE:
+ cfg80211_chandef_create(new_chandef, new_chan,
+ NL80211_CHAN_HT20);
+ break;
+ case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
+ cfg80211_chandef_create(new_chandef, new_chan,
+ NL80211_CHAN_HT40PLUS);
+ break;
+ case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
+ cfg80211_chandef_create(new_chandef, new_chan,
+ NL80211_CHAN_HT40MINUS);
+ break;
+ case -1:
+ cfg80211_chandef_create(new_chandef, new_chan,
+ NL80211_CHAN_NO_HT);
+ /* keep width for 5/10 MHz channels */
+ switch (sdata->vif.bss_conf.chandef.width) {
+ case NL80211_CHAN_WIDTH_5:
+ case NL80211_CHAN_WIDTH_10:
+ new_chandef->width = sdata->vif.bss_conf.chandef.width;
+ break;
+ default:
+ break;
+ }
+ break;
+ }
+
+ if (wide_bw_chansw_ie) {
+ new_vht_chandef.chan = new_chan;
+ new_vht_chandef.center_freq1 =
+ ieee80211_channel_to_frequency(
+ wide_bw_chansw_ie->new_center_freq_seg0,
+ new_band);
+
+ switch (wide_bw_chansw_ie->new_channel_width) {
+ default:
+ /* hmmm, ignore VHT and use HT if present */
+ case IEEE80211_VHT_CHANWIDTH_USE_HT:
+ new_vht_chandef.chan = NULL;
+ break;
+ case IEEE80211_VHT_CHANWIDTH_80MHZ:
+ new_vht_chandef.width = NL80211_CHAN_WIDTH_80;
+ break;
+ case IEEE80211_VHT_CHANWIDTH_160MHZ:
+ new_vht_chandef.width = NL80211_CHAN_WIDTH_160;
+ break;
+ case IEEE80211_VHT_CHANWIDTH_80P80MHZ:
+ /* field is otherwise reserved */
+ new_vht_chandef.center_freq2 =
+ ieee80211_channel_to_frequency(
+ wide_bw_chansw_ie->new_center_freq_seg1,
+ new_band);
+ new_vht_chandef.width = NL80211_CHAN_WIDTH_80P80;
+ break;
+ }
+ if (sta_flags & IEEE80211_STA_DISABLE_80P80MHZ &&
+ new_vht_chandef.width == NL80211_CHAN_WIDTH_80P80)
+ ieee80211_chandef_downgrade(&new_vht_chandef);
+ if (sta_flags & IEEE80211_STA_DISABLE_160MHZ &&
+ new_vht_chandef.width == NL80211_CHAN_WIDTH_160)
+ ieee80211_chandef_downgrade(&new_vht_chandef);
+ if (sta_flags & IEEE80211_STA_DISABLE_40MHZ &&
+ new_vht_chandef.width > NL80211_CHAN_WIDTH_20)
+ ieee80211_chandef_downgrade(&new_vht_chandef);
+ }
+
+ /* if VHT data is there validate & use it */
+ if (new_vht_chandef.chan) {
+ if (!cfg80211_chandef_compatible(&new_vht_chandef,
+ new_chandef)) {
+ sdata_info(sdata,
+ "BSS %pM: CSA has inconsistent channel data, disconnecting\n",
+ bssid);
+ return -EINVAL;
+ }
+ *new_chandef = new_vht_chandef;
+ }
+
+ return 0;
+}
+
static void ieee80211_send_refuse_measurement_request(struct ieee80211_sub_if_data *sdata,
struct ieee80211_msrment_ie *request_ie,
const u8 *da, const u8 *bssid,
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 75a1685..3c8283b 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -2292,3 +2292,63 @@
ieee80211_queue_work(hw, &local->radar_detected_work);
}
EXPORT_SYMBOL(ieee80211_radar_detected);
+
+u32 ieee80211_chandef_downgrade(struct cfg80211_chan_def *c)
+{
+ u32 ret;
+ int tmp;
+
+ switch (c->width) {
+ case NL80211_CHAN_WIDTH_20:
+ c->width = NL80211_CHAN_WIDTH_20_NOHT;
+ ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
+ break;
+ case NL80211_CHAN_WIDTH_40:
+ c->width = NL80211_CHAN_WIDTH_20;
+ c->center_freq1 = c->chan->center_freq;
+ ret = IEEE80211_STA_DISABLE_40MHZ |
+ IEEE80211_STA_DISABLE_VHT;
+ break;
+ case NL80211_CHAN_WIDTH_80:
+ tmp = (30 + c->chan->center_freq - c->center_freq1)/20;
+ /* n_P40 */
+ tmp /= 2;
+ /* freq_P40 */
+ c->center_freq1 = c->center_freq1 - 20 + 40 * tmp;
+ c->width = NL80211_CHAN_WIDTH_40;
+ ret = IEEE80211_STA_DISABLE_VHT;
+ break;
+ case NL80211_CHAN_WIDTH_80P80:
+ c->center_freq2 = 0;
+ c->width = NL80211_CHAN_WIDTH_80;
+ ret = IEEE80211_STA_DISABLE_80P80MHZ |
+ IEEE80211_STA_DISABLE_160MHZ;
+ break;
+ case NL80211_CHAN_WIDTH_160:
+ /* n_P20 */
+ tmp = (70 + c->chan->center_freq - c->center_freq1)/20;
+ /* n_P80 */
+ tmp /= 4;
+ c->center_freq1 = c->center_freq1 - 40 + 80 * tmp;
+ c->width = NL80211_CHAN_WIDTH_80;
+ ret = IEEE80211_STA_DISABLE_80P80MHZ |
+ IEEE80211_STA_DISABLE_160MHZ;
+ break;
+ default:
+ case NL80211_CHAN_WIDTH_20_NOHT:
+ WARN_ON_ONCE(1);
+ c->width = NL80211_CHAN_WIDTH_20_NOHT;
+ ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
+ break;
+ case NL80211_CHAN_WIDTH_5:
+ case NL80211_CHAN_WIDTH_10:
+ WARN_ON_ONCE(1);
+ /* keep c->width */
+ ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
+ break;
+ }
+
+ WARN_ON_ONCE(!cfg80211_chandef_valid(c));
+
+ return ret;
+}