| # |
| # IPv6 configuration |
| # |
| |
| # IPv6 as module will cause a CRASH if you try to unload it |
| menuconfig IPV6 |
| tristate "The IPv6 protocol" |
| default m |
| ---help--- |
| This is complemental support for the IP version 6. |
| You will still be able to do traditional IPv4 networking as well. |
| |
| For general information about IPv6, see |
| <http://playground.sun.com/pub/ipng/html/ipng-main.html>. |
| For Linux IPv6 development information, see <http://www.linux-ipv6.org>. |
| For specific information about IPv6 under Linux, read the HOWTO at |
| <http://www.bieringer.de/linux/IPv6/>. |
| |
| To compile this protocol support as a module, choose M here: the |
| module will be called ipv6. |
| |
| if IPV6 |
| |
| config IPV6_PRIVACY |
| bool "IPv6: Privacy Extensions (RFC 3041) support" |
| ---help--- |
| Privacy Extensions for Stateless Address Autoconfiguration in IPv6 |
| support. With this option, additional periodically-altered |
| pseudo-random global-scope unicast address(es) will be assigned to |
| your interface(s). |
| |
| We use our standard pseudo-random algorithm to generate the |
| randomized interface identifier, instead of one described in RFC 3041. |
| |
| By default the kernel does not generate temporary addresses. |
| To use temporary addresses, do |
| |
| echo 2 >/proc/sys/net/ipv6/conf/all/use_tempaddr |
| |
| See <file:Documentation/networking/ip-sysctl.txt> for details. |
| |
| config IPV6_ROUTER_PREF |
| bool "IPv6: Router Preference (RFC 4191) support" |
| ---help--- |
| Router Preference is an optional extension to the Router |
| Advertisement message which improves the ability of hosts |
| to pick an appropriate router, especially when the hosts |
| are placed in a multi-homed network. |
| |
| If unsure, say N. |
| |
| config IPV6_ROUTE_INFO |
| bool "IPv6: Route Information (RFC 4191) support (EXPERIMENTAL)" |
| depends on IPV6_ROUTER_PREF && EXPERIMENTAL |
| ---help--- |
| This is experimental support of Route Information. |
| |
| If unsure, say N. |
| |
| config IPV6_OPTIMISTIC_DAD |
| bool "IPv6: Enable RFC 4429 Optimistic DAD (EXPERIMENTAL)" |
| depends on EXPERIMENTAL |
| ---help--- |
| This is experimental support for optimistic Duplicate |
| Address Detection. It allows for autoconfigured addresses |
| to be used more quickly. |
| |
| If unsure, say N. |
| |
| config INET6_AH |
| tristate "IPv6: AH transformation" |
| select XFRM_ALGO |
| select CRYPTO |
| select CRYPTO_HMAC |
| select CRYPTO_MD5 |
| select CRYPTO_SHA1 |
| ---help--- |
| Support for IPsec AH. |
| |
| If unsure, say Y. |
| |
| config INET6_ESP |
| tristate "IPv6: ESP transformation" |
| select XFRM_ALGO |
| select CRYPTO |
| select CRYPTO_AUTHENC |
| select CRYPTO_HMAC |
| select CRYPTO_MD5 |
| select CRYPTO_CBC |
| select CRYPTO_SHA1 |
| select CRYPTO_DES |
| ---help--- |
| Support for IPsec ESP. |
| |
| If unsure, say Y. |
| |
| config INET6_IPCOMP |
| tristate "IPv6: IPComp transformation" |
| select INET6_XFRM_TUNNEL |
| select XFRM_IPCOMP |
| ---help--- |
| Support for IP Payload Compression Protocol (IPComp) (RFC3173), |
| typically needed for IPsec. |
| |
| If unsure, say Y. |
| |
| config IPV6_MIP6 |
| tristate "IPv6: Mobility (EXPERIMENTAL)" |
| depends on EXPERIMENTAL |
| select XFRM |
| ---help--- |
| Support for IPv6 Mobility described in RFC 3775. |
| |
| If unsure, say N. |
| |
| config INET6_XFRM_TUNNEL |
| tristate |
| select INET6_TUNNEL |
| default n |
| |
| config INET6_TUNNEL |
| tristate |
| default n |
| |
| config INET6_XFRM_MODE_TRANSPORT |
| tristate "IPv6: IPsec transport mode" |
| default IPV6 |
| select XFRM |
| ---help--- |
| Support for IPsec transport mode. |
| |
| If unsure, say Y. |
| |
| config INET6_XFRM_MODE_TUNNEL |
| tristate "IPv6: IPsec tunnel mode" |
| default IPV6 |
| select XFRM |
| ---help--- |
| Support for IPsec tunnel mode. |
| |
| If unsure, say Y. |
| |
| config INET6_XFRM_MODE_BEET |
| tristate "IPv6: IPsec BEET mode" |
| default IPV6 |
| select XFRM |
| ---help--- |
| Support for IPsec BEET mode. |
| |
| If unsure, say Y. |
| |
| config INET6_XFRM_MODE_ROUTEOPTIMIZATION |
| tristate "IPv6: MIPv6 route optimization mode (EXPERIMENTAL)" |
| depends on EXPERIMENTAL |
| select XFRM |
| ---help--- |
| Support for MIPv6 route optimization mode. |
| |
| config IPV6_SIT |
| tristate "IPv6: IPv6-in-IPv4 tunnel (SIT driver)" |
| select INET_TUNNEL |
| select IPV6_NDISC_NODETYPE |
| default y |
| ---help--- |
| Tunneling means encapsulating data of one protocol type within |
| another protocol and sending it over a channel that understands the |
| encapsulating protocol. This driver implements encapsulation of IPv6 |
| into IPv4 packets. This is useful if you want to connect two IPv6 |
| networks over an IPv4-only path. |
| |
| Saying M here will produce a module called sit. If unsure, say Y. |
| |
| config IPV6_SIT_6RD |
| bool "IPv6: IPv6 Rapid Deployment (6RD) (EXPERIMENTAL)" |
| depends on IPV6_SIT && EXPERIMENTAL |
| default n |
| ---help--- |
| IPv6 Rapid Deployment (6rd; draft-ietf-softwire-ipv6-6rd) builds upon |
| mechanisms of 6to4 (RFC3056) to enable a service provider to rapidly |
| deploy IPv6 unicast service to IPv4 sites to which it provides |
| customer premise equipment. Like 6to4, it utilizes stateless IPv6 in |
| IPv4 encapsulation in order to transit IPv4-only network |
| infrastructure. Unlike 6to4, a 6rd service provider uses an IPv6 |
| prefix of its own in place of the fixed 6to4 prefix. |
| |
| With this option enabled, the SIT driver offers 6rd functionality by |
| providing additional ioctl API to configure the IPv6 Prefix for in |
| stead of static 2002::/16 for 6to4. |
| |
| If unsure, say N. |
| |
| config IPV6_NDISC_NODETYPE |
| bool |
| |
| config IPV6_TUNNEL |
| tristate "IPv6: IP-in-IPv6 tunnel (RFC2473)" |
| select INET6_TUNNEL |
| ---help--- |
| Support for IPv6-in-IPv6 and IPv4-in-IPv6 tunnels described in |
| RFC 2473. |
| |
| If unsure, say N. |
| |
| config IPV6_GRE |
| tristate "IPv6: GRE tunnel" |
| select IPV6_TUNNEL |
| ---help--- |
| Tunneling means encapsulating data of one protocol type within |
| another protocol and sending it over a channel that understands the |
| encapsulating protocol. This particular tunneling driver implements |
| GRE (Generic Routing Encapsulation) and at this time allows |
| encapsulating of IPv4 or IPv6 over existing IPv6 infrastructure. |
| This driver is useful if the other endpoint is a Cisco router: Cisco |
| likes GRE much better than the other Linux tunneling driver ("IP |
| tunneling" above). In addition, GRE allows multicast redistribution |
| through the tunnel. |
| |
| Saying M here will produce a module called ip6_gre. If unsure, say N. |
| |
| config IPV6_MULTIPLE_TABLES |
| bool "IPv6: Multiple Routing Tables" |
| depends on EXPERIMENTAL |
| select FIB_RULES |
| ---help--- |
| Support multiple routing tables. |
| |
| config IPV6_SUBTREES |
| bool "IPv6: source address based routing" |
| depends on IPV6_MULTIPLE_TABLES |
| ---help--- |
| Enable routing by source address or prefix. |
| |
| The destination address is still the primary routing key, so mixing |
| normal and source prefix specific routes in the same routing table |
| may sometimes lead to unintended routing behavior. This can be |
| avoided by defining different routing tables for the normal and |
| source prefix specific routes. |
| |
| If unsure, say N. |
| |
| config IPV6_MROUTE |
| bool "IPv6: multicast routing (EXPERIMENTAL)" |
| depends on IPV6 && EXPERIMENTAL |
| ---help--- |
| Experimental support for IPv6 multicast forwarding. |
| If unsure, say N. |
| |
| config IPV6_MROUTE_MULTIPLE_TABLES |
| bool "IPv6: multicast policy routing" |
| depends on IPV6_MROUTE |
| select FIB_RULES |
| help |
| Normally, a multicast router runs a userspace daemon and decides |
| what to do with a multicast packet based on the source and |
| destination addresses. If you say Y here, the multicast router |
| will also be able to take interfaces and packet marks into |
| account and run multiple instances of userspace daemons |
| simultaneously, each one handling a single table. |
| |
| If unsure, say N. |
| |
| config IPV6_PIMSM_V2 |
| bool "IPv6: PIM-SM version 2 support (EXPERIMENTAL)" |
| depends on IPV6_MROUTE |
| ---help--- |
| Support for IPv6 PIM multicast routing protocol PIM-SMv2. |
| If unsure, say N. |
| |
| endif # IPV6 |