| /* |
| * Copyright (C) 2000-2001 Deep Blue Solutions |
| * Copyright (C) 2002 Shane Nay (shane@minirl.com) |
| * Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com) |
| * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) |
| * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, |
| * MA 02110-1301, USA. |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/clockchips.h> |
| #include <linux/clk.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/of_irq.h> |
| #include <linux/stmp_device.h> |
| #include <linux/sched_clock.h> |
| |
| /* |
| * There are 2 versions of the timrot on Freescale MXS-based SoCs. |
| * The v1 on MX23 only gets 16 bits counter, while v2 on MX28 |
| * extends the counter to 32 bits. |
| * |
| * The implementation uses two timers, one for clock_event and |
| * another for clocksource. MX28 uses timrot 0 and 1, while MX23 |
| * uses 0 and 2. |
| */ |
| |
| #define MX23_TIMROT_VERSION_OFFSET 0x0a0 |
| #define MX28_TIMROT_VERSION_OFFSET 0x120 |
| #define BP_TIMROT_MAJOR_VERSION 24 |
| #define BV_TIMROT_VERSION_1 0x01 |
| #define BV_TIMROT_VERSION_2 0x02 |
| #define timrot_is_v1() (timrot_major_version == BV_TIMROT_VERSION_1) |
| |
| /* |
| * There are 4 registers for each timrotv2 instance, and 2 registers |
| * for each timrotv1. So address step 0x40 in macros below strides |
| * one instance of timrotv2 while two instances of timrotv1. |
| * |
| * As the result, HW_TIMROT_XXXn(1) defines the address of timrot1 |
| * on MX28 while timrot2 on MX23. |
| */ |
| /* common between v1 and v2 */ |
| #define HW_TIMROT_ROTCTRL 0x00 |
| #define HW_TIMROT_TIMCTRLn(n) (0x20 + (n) * 0x40) |
| /* v1 only */ |
| #define HW_TIMROT_TIMCOUNTn(n) (0x30 + (n) * 0x40) |
| /* v2 only */ |
| #define HW_TIMROT_RUNNING_COUNTn(n) (0x30 + (n) * 0x40) |
| #define HW_TIMROT_FIXED_COUNTn(n) (0x40 + (n) * 0x40) |
| |
| #define BM_TIMROT_TIMCTRLn_RELOAD (1 << 6) |
| #define BM_TIMROT_TIMCTRLn_UPDATE (1 << 7) |
| #define BM_TIMROT_TIMCTRLn_IRQ_EN (1 << 14) |
| #define BM_TIMROT_TIMCTRLn_IRQ (1 << 15) |
| #define BP_TIMROT_TIMCTRLn_SELECT 0 |
| #define BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL 0x8 |
| #define BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL 0xb |
| #define BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS 0xf |
| |
| static struct clock_event_device mxs_clockevent_device; |
| |
| static void __iomem *mxs_timrot_base; |
| static u32 timrot_major_version; |
| |
| static inline void timrot_irq_disable(void) |
| { |
| __raw_writel(BM_TIMROT_TIMCTRLn_IRQ_EN, mxs_timrot_base + |
| HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_CLR); |
| } |
| |
| static inline void timrot_irq_enable(void) |
| { |
| __raw_writel(BM_TIMROT_TIMCTRLn_IRQ_EN, mxs_timrot_base + |
| HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_SET); |
| } |
| |
| static void timrot_irq_acknowledge(void) |
| { |
| __raw_writel(BM_TIMROT_TIMCTRLn_IRQ, mxs_timrot_base + |
| HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_CLR); |
| } |
| |
| static cycle_t timrotv1_get_cycles(struct clocksource *cs) |
| { |
| return ~((__raw_readl(mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1)) |
| & 0xffff0000) >> 16); |
| } |
| |
| static int timrotv1_set_next_event(unsigned long evt, |
| struct clock_event_device *dev) |
| { |
| /* timrot decrements the count */ |
| __raw_writel(evt, mxs_timrot_base + HW_TIMROT_TIMCOUNTn(0)); |
| |
| return 0; |
| } |
| |
| static int timrotv2_set_next_event(unsigned long evt, |
| struct clock_event_device *dev) |
| { |
| /* timrot decrements the count */ |
| __raw_writel(evt, mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(0)); |
| |
| return 0; |
| } |
| |
| static irqreturn_t mxs_timer_interrupt(int irq, void *dev_id) |
| { |
| struct clock_event_device *evt = dev_id; |
| |
| timrot_irq_acknowledge(); |
| evt->event_handler(evt); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static struct irqaction mxs_timer_irq = { |
| .name = "MXS Timer Tick", |
| .dev_id = &mxs_clockevent_device, |
| .flags = IRQF_TIMER | IRQF_IRQPOLL, |
| .handler = mxs_timer_interrupt, |
| }; |
| |
| static void mxs_irq_clear(char *state) |
| { |
| /* Disable interrupt in timer module */ |
| timrot_irq_disable(); |
| |
| /* Set event time into the furthest future */ |
| if (timrot_is_v1()) |
| __raw_writel(0xffff, mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1)); |
| else |
| __raw_writel(0xffffffff, |
| mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1)); |
| |
| /* Clear pending interrupt */ |
| timrot_irq_acknowledge(); |
| pr_debug("%s: changing mode to %s\n", __func__, state); |
| } |
| |
| static int mxs_shutdown(struct clock_event_device *evt) |
| { |
| mxs_irq_clear("shutdown"); |
| |
| return 0; |
| } |
| |
| static int mxs_set_oneshot(struct clock_event_device *evt) |
| { |
| if (clockevent_state_oneshot(evt)) |
| mxs_irq_clear("oneshot"); |
| timrot_irq_enable(); |
| return 0; |
| } |
| |
| static struct clock_event_device mxs_clockevent_device = { |
| .name = "mxs_timrot", |
| .features = CLOCK_EVT_FEAT_ONESHOT, |
| .set_state_shutdown = mxs_shutdown, |
| .set_state_oneshot = mxs_set_oneshot, |
| .tick_resume = mxs_shutdown, |
| .set_next_event = timrotv2_set_next_event, |
| .rating = 200, |
| }; |
| |
| static int __init mxs_clockevent_init(struct clk *timer_clk) |
| { |
| if (timrot_is_v1()) |
| mxs_clockevent_device.set_next_event = timrotv1_set_next_event; |
| mxs_clockevent_device.cpumask = cpumask_of(0); |
| clockevents_config_and_register(&mxs_clockevent_device, |
| clk_get_rate(timer_clk), |
| timrot_is_v1() ? 0xf : 0x2, |
| timrot_is_v1() ? 0xfffe : 0xfffffffe); |
| |
| return 0; |
| } |
| |
| static struct clocksource clocksource_mxs = { |
| .name = "mxs_timer", |
| .rating = 200, |
| .read = timrotv1_get_cycles, |
| .mask = CLOCKSOURCE_MASK(16), |
| .flags = CLOCK_SOURCE_IS_CONTINUOUS, |
| }; |
| |
| static u64 notrace mxs_read_sched_clock_v2(void) |
| { |
| return ~readl_relaxed(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1)); |
| } |
| |
| static int __init mxs_clocksource_init(struct clk *timer_clk) |
| { |
| unsigned int c = clk_get_rate(timer_clk); |
| |
| if (timrot_is_v1()) |
| clocksource_register_hz(&clocksource_mxs, c); |
| else { |
| clocksource_mmio_init(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1), |
| "mxs_timer", c, 200, 32, clocksource_mmio_readl_down); |
| sched_clock_register(mxs_read_sched_clock_v2, 32, c); |
| } |
| |
| return 0; |
| } |
| |
| static int __init mxs_timer_init(struct device_node *np) |
| { |
| struct clk *timer_clk; |
| int irq, ret; |
| |
| mxs_timrot_base = of_iomap(np, 0); |
| WARN_ON(!mxs_timrot_base); |
| |
| timer_clk = of_clk_get(np, 0); |
| if (IS_ERR(timer_clk)) { |
| pr_err("%s: failed to get clk\n", __func__); |
| return PTR_ERR(timer_clk); |
| } |
| |
| ret = clk_prepare_enable(timer_clk); |
| if (ret) |
| return ret; |
| |
| /* |
| * Initialize timers to a known state |
| */ |
| stmp_reset_block(mxs_timrot_base + HW_TIMROT_ROTCTRL); |
| |
| /* get timrot version */ |
| timrot_major_version = __raw_readl(mxs_timrot_base + |
| (of_device_is_compatible(np, "fsl,imx23-timrot") ? |
| MX23_TIMROT_VERSION_OFFSET : |
| MX28_TIMROT_VERSION_OFFSET)); |
| timrot_major_version >>= BP_TIMROT_MAJOR_VERSION; |
| |
| /* one for clock_event */ |
| __raw_writel((timrot_is_v1() ? |
| BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL : |
| BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS) | |
| BM_TIMROT_TIMCTRLn_UPDATE | |
| BM_TIMROT_TIMCTRLn_IRQ_EN, |
| mxs_timrot_base + HW_TIMROT_TIMCTRLn(0)); |
| |
| /* another for clocksource */ |
| __raw_writel((timrot_is_v1() ? |
| BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL : |
| BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS) | |
| BM_TIMROT_TIMCTRLn_RELOAD, |
| mxs_timrot_base + HW_TIMROT_TIMCTRLn(1)); |
| |
| /* set clocksource timer fixed count to the maximum */ |
| if (timrot_is_v1()) |
| __raw_writel(0xffff, |
| mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1)); |
| else |
| __raw_writel(0xffffffff, |
| mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1)); |
| |
| /* init and register the timer to the framework */ |
| ret = mxs_clocksource_init(timer_clk); |
| if (ret) |
| return ret; |
| |
| ret = mxs_clockevent_init(timer_clk); |
| if (ret) |
| return ret; |
| |
| /* Make irqs happen */ |
| irq = irq_of_parse_and_map(np, 0); |
| if (irq <= 0) |
| return -EINVAL; |
| |
| return setup_irq(irq, &mxs_timer_irq); |
| } |
| CLOCKSOURCE_OF_DECLARE(mxs, "fsl,timrot", mxs_timer_init); |