MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs.
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 224e548..705a7a9 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -80,6 +80,21 @@
help
Support for BCM47XX based boards
+config BCM63XX
+ bool "Broadcom BCM63XX based boards"
+ select CEVT_R4K
+ select CSRC_R4K
+ select DMA_NONCOHERENT
+ select IRQ_CPU
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_HAS_EARLY_PRINTK
+ select SWAP_IO_SPACE
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ Support for BCM63XX based boards
+
config MIPS_COBALT
bool "Cobalt Server"
select CEVT_R4K
@@ -645,6 +660,7 @@
source "arch/mips/alchemy/Kconfig"
source "arch/mips/basler/excite/Kconfig"
+source "arch/mips/bcm63xx/Kconfig"
source "arch/mips/jazz/Kconfig"
source "arch/mips/lasat/Kconfig"
source "arch/mips/pmc-sierra/Kconfig"
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 1efa9aa..c825b14 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -565,6 +565,13 @@
load-$(CONFIG_BCM47XX) := 0xffffffff80001000
#
+# Broadcom BCM63XX boards
+#
+core-$(CONFIG_BCM63XX) += arch/mips/bcm63xx/
+cflags-$(CONFIG_BCM63XX) += -I$(srctree)/arch/mips/include/asm/mach-bcm63xx/
+load-$(CONFIG_BCM63XX) := 0xffffffff80010000
+
+#
# SNI RM
#
core-$(CONFIG_SNI_RM) += arch/mips/sni/
diff --git a/arch/mips/bcm63xx/Kconfig b/arch/mips/bcm63xx/Kconfig
new file mode 100644
index 0000000..fb177d6
--- /dev/null
+++ b/arch/mips/bcm63xx/Kconfig
@@ -0,0 +1,25 @@
+menu "CPU support"
+ depends on BCM63XX
+
+config BCM63XX_CPU_6338
+ bool "support 6338 CPU"
+ select HW_HAS_PCI
+ select USB_ARCH_HAS_OHCI
+ select USB_OHCI_BIG_ENDIAN_DESC
+ select USB_OHCI_BIG_ENDIAN_MMIO
+
+config BCM63XX_CPU_6345
+ bool "support 6345 CPU"
+ select USB_OHCI_BIG_ENDIAN_DESC
+ select USB_OHCI_BIG_ENDIAN_MMIO
+
+config BCM63XX_CPU_6348
+ bool "support 6348 CPU"
+ select HW_HAS_PCI
+
+config BCM63XX_CPU_6358
+ bool "support 6358 CPU"
+ select HW_HAS_PCI
+endmenu
+
+source "arch/mips/bcm63xx/boards/Kconfig"
diff --git a/arch/mips/bcm63xx/Makefile b/arch/mips/bcm63xx/Makefile
new file mode 100644
index 0000000..99bbc87
--- /dev/null
+++ b/arch/mips/bcm63xx/Makefile
@@ -0,0 +1,7 @@
+obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
+ dev-dsp.o
+obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+
+obj-y += boards/
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/bcm63xx/boards/Kconfig b/arch/mips/bcm63xx/boards/Kconfig
new file mode 100644
index 0000000..c6aed33
--- /dev/null
+++ b/arch/mips/bcm63xx/boards/Kconfig
@@ -0,0 +1,11 @@
+choice
+ prompt "Board support"
+ depends on BCM63XX
+ default BOARD_BCM963XX
+
+config BOARD_BCM963XX
+ bool "Generic Broadcom 963xx boards"
+ select SSB
+ help
+
+endchoice
diff --git a/arch/mips/bcm63xx/boards/Makefile b/arch/mips/bcm63xx/boards/Makefile
new file mode 100644
index 0000000..e5cc86d
--- /dev/null
+++ b/arch/mips/bcm63xx/boards/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_BOARD_BCM963XX) += board_bcm963xx.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
new file mode 100644
index 0000000..fd77f54
--- /dev/null
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -0,0 +1,837 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/ssb/ssb.h>
+#include <asm/addrspace.h>
+#include <bcm63xx_board.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_board.h>
+#include <bcm63xx_dev_pci.h>
+#include <bcm63xx_dev_enet.h>
+#include <bcm63xx_dev_dsp.h>
+#include <board_bcm963xx.h>
+
+#define PFX "board_bcm963xx: "
+
+static struct bcm963xx_nvram nvram;
+static unsigned int mac_addr_used;
+static struct board_info board;
+
+/*
+ * known 6338 boards
+ */
+#ifdef CONFIG_BCM63XX_CPU_6338
+static struct board_info __initdata board_96338gw = {
+ .name = "96338GW",
+ .expected_cpu_id = 0x6338,
+
+ .has_enet0 = 1,
+ .enet0 = {
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+ .has_ohci0 = 1,
+
+ .leds = {
+ {
+ .name = "adsl",
+ .gpio = 3,
+ .active_low = 1,
+ },
+ {
+ .name = "ses",
+ .gpio = 5,
+ .active_low = 1,
+ },
+ {
+ .name = "ppp-fail",
+ .gpio = 4,
+ .active_low = 1,
+ },
+ {
+ .name = "power",
+ .gpio = 0,
+ .active_low = 1,
+ .default_trigger = "default-on",
+ },
+ {
+ .name = "stop",
+ .gpio = 1,
+ .active_low = 1,
+ }
+ },
+};
+
+static struct board_info __initdata board_96338w = {
+ .name = "96338W",
+ .expected_cpu_id = 0x6338,
+
+ .has_enet0 = 1,
+ .enet0 = {
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+ .leds = {
+ {
+ .name = "adsl",
+ .gpio = 3,
+ .active_low = 1,
+ },
+ {
+ .name = "ses",
+ .gpio = 5,
+ .active_low = 1,
+ },
+ {
+ .name = "ppp-fail",
+ .gpio = 4,
+ .active_low = 1,
+ },
+ {
+ .name = "power",
+ .gpio = 0,
+ .active_low = 1,
+ .default_trigger = "default-on",
+ },
+ {
+ .name = "stop",
+ .gpio = 1,
+ .active_low = 1,
+ },
+ },
+};
+#endif
+
+/*
+ * known 6345 boards
+ */
+#ifdef CONFIG_BCM63XX_CPU_6345
+static struct board_info __initdata board_96345gw2 = {
+ .name = "96345GW2",
+ .expected_cpu_id = 0x6345,
+};
+#endif
+
+/*
+ * known 6348 boards
+ */
+#ifdef CONFIG_BCM63XX_CPU_6348
+static struct board_info __initdata board_96348r = {
+ .name = "96348R",
+ .expected_cpu_id = 0x6348,
+
+ .has_enet0 = 1,
+ .has_pci = 1,
+
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+
+ .leds = {
+ {
+ .name = "adsl-fail",
+ .gpio = 2,
+ .active_low = 1,
+ },
+ {
+ .name = "ppp",
+ .gpio = 3,
+ .active_low = 1,
+ },
+ {
+ .name = "ppp-fail",
+ .gpio = 4,
+ .active_low = 1,
+ },
+ {
+ .name = "power",
+ .gpio = 0,
+ .active_low = 1,
+ .default_trigger = "default-on",
+
+ },
+ {
+ .name = "stop",
+ .gpio = 1,
+ .active_low = 1,
+ },
+ },
+};
+
+static struct board_info __initdata board_96348gw_10 = {
+ .name = "96348GW-10",
+ .expected_cpu_id = 0x6348,
+
+ .has_enet0 = 1,
+ .has_enet1 = 1,
+ .has_pci = 1,
+
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+ .enet1 = {
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+ .has_ohci0 = 1,
+ .has_pccard = 1,
+ .has_ehci0 = 1,
+
+ .has_dsp = 1,
+ .dsp = {
+ .gpio_rst = 6,
+ .gpio_int = 34,
+ .cs = 2,
+ .ext_irq = 2,
+ },
+
+ .leds = {
+ {
+ .name = "adsl-fail",
+ .gpio = 2,
+ .active_low = 1,
+ },
+ {
+ .name = "ppp",
+ .gpio = 3,
+ .active_low = 1,
+ },
+ {
+ .name = "ppp-fail",
+ .gpio = 4,
+ .active_low = 1,
+ },
+ {
+ .name = "power",
+ .gpio = 0,
+ .active_low = 1,
+ .default_trigger = "default-on",
+ },
+ {
+ .name = "stop",
+ .gpio = 1,
+ .active_low = 1,
+ },
+ },
+};
+
+static struct board_info __initdata board_96348gw_11 = {
+ .name = "96348GW-11",
+ .expected_cpu_id = 0x6348,
+
+ .has_enet0 = 1,
+ .has_enet1 = 1,
+ .has_pci = 1,
+
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+
+ .enet1 = {
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+
+ .has_ohci0 = 1,
+ .has_pccard = 1,
+ .has_ehci0 = 1,
+
+ .leds = {
+ {
+ .name = "adsl-fail",
+ .gpio = 2,
+ .active_low = 1,
+ },
+ {
+ .name = "ppp",
+ .gpio = 3,
+ .active_low = 1,
+ },
+ {
+ .name = "ppp-fail",
+ .gpio = 4,
+ .active_low = 1,
+ },
+ {
+ .name = "power",
+ .gpio = 0,
+ .active_low = 1,
+ .default_trigger = "default-on",
+ },
+ {
+ .name = "stop",
+ .gpio = 1,
+ .active_low = 1,
+ },
+ },
+};
+
+static struct board_info __initdata board_96348gw = {
+ .name = "96348GW",
+ .expected_cpu_id = 0x6348,
+
+ .has_enet0 = 1,
+ .has_enet1 = 1,
+ .has_pci = 1,
+
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+ .enet1 = {
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+ .has_ohci0 = 1,
+
+ .has_dsp = 1,
+ .dsp = {
+ .gpio_rst = 6,
+ .gpio_int = 34,
+ .ext_irq = 2,
+ .cs = 2,
+ },
+
+ .leds = {
+ {
+ .name = "adsl-fail",
+ .gpio = 2,
+ .active_low = 1,
+ },
+ {
+ .name = "ppp",
+ .gpio = 3,
+ .active_low = 1,
+ },
+ {
+ .name = "ppp-fail",
+ .gpio = 4,
+ .active_low = 1,
+ },
+ {
+ .name = "power",
+ .gpio = 0,
+ .active_low = 1,
+ .default_trigger = "default-on",
+ },
+ {
+ .name = "stop",
+ .gpio = 1,
+ .active_low = 1,
+ },
+ },
+};
+
+static struct board_info __initdata board_FAST2404 = {
+ .name = "F@ST2404",
+ .expected_cpu_id = 0x6348,
+
+ .has_enet0 = 1,
+ .has_enet1 = 1,
+ .has_pci = 1,
+
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+
+ .enet1 = {
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+
+ .has_ohci0 = 1,
+ .has_pccard = 1,
+ .has_ehci0 = 1,
+};
+
+static struct board_info __initdata board_DV201AMR = {
+ .name = "DV201AMR",
+ .expected_cpu_id = 0x6348,
+
+ .has_pci = 1,
+ .has_ohci0 = 1,
+
+ .has_enet0 = 1,
+ .has_enet1 = 1,
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+ .enet1 = {
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+};
+
+static struct board_info __initdata board_96348gw_a = {
+ .name = "96348GW-A",
+ .expected_cpu_id = 0x6348,
+
+ .has_enet0 = 1,
+ .has_enet1 = 1,
+ .has_pci = 1,
+
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+ .enet1 = {
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+ .has_ohci0 = 1,
+};
+#endif
+
+/*
+ * known 6358 boards
+ */
+#ifdef CONFIG_BCM63XX_CPU_6358
+static struct board_info __initdata board_96358vw = {
+ .name = "96358VW",
+ .expected_cpu_id = 0x6358,
+
+ .has_enet0 = 1,
+ .has_enet1 = 1,
+ .has_pci = 1,
+
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+
+ .enet1 = {
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+
+ .has_ohci0 = 1,
+ .has_pccard = 1,
+ .has_ehci0 = 1,
+
+ .leds = {
+ {
+ .name = "adsl-fail",
+ .gpio = 15,
+ .active_low = 1,
+ },
+ {
+ .name = "ppp",
+ .gpio = 22,
+ .active_low = 1,
+ },
+ {
+ .name = "ppp-fail",
+ .gpio = 23,
+ .active_low = 1,
+ },
+ {
+ .name = "power",
+ .gpio = 4,
+ .default_trigger = "default-on",
+ },
+ {
+ .name = "stop",
+ .gpio = 5,
+ },
+ },
+};
+
+static struct board_info __initdata board_96358vw2 = {
+ .name = "96358VW2",
+ .expected_cpu_id = 0x6358,
+
+ .has_enet0 = 1,
+ .has_enet1 = 1,
+ .has_pci = 1,
+
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+
+ .enet1 = {
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+
+ .has_ohci0 = 1,
+ .has_pccard = 1,
+ .has_ehci0 = 1,
+
+ .leds = {
+ {
+ .name = "adsl",
+ .gpio = 22,
+ .active_low = 1,
+ },
+ {
+ .name = "ppp-fail",
+ .gpio = 23,
+ },
+ {
+ .name = "power",
+ .gpio = 5,
+ .active_low = 1,
+ .default_trigger = "default-on",
+ },
+ {
+ .name = "stop",
+ .gpio = 4,
+ .active_low = 1,
+ },
+ },
+};
+
+static struct board_info __initdata board_AGPFS0 = {
+ .name = "AGPF-S0",
+ .expected_cpu_id = 0x6358,
+
+ .has_enet0 = 1,
+ .has_enet1 = 1,
+ .has_pci = 1,
+
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+
+ .enet1 = {
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+};
+#endif
+
+/*
+ * all boards
+ */
+static const struct board_info __initdata *bcm963xx_boards[] = {
+#ifdef CONFIG_BCM63XX_CPU_6338
+ &board_96338gw,
+ &board_96338w,
+#endif
+#ifdef CONFIG_BCM63XX_CPU_6345
+ &board_96345gw2,
+#endif
+#ifdef CONFIG_BCM63XX_CPU_6348
+ &board_96348r,
+ &board_96348gw,
+ &board_96348gw_10,
+ &board_96348gw_11,
+ &board_FAST2404,
+ &board_DV201AMR,
+ &board_96348gw_a,
+#endif
+
+#ifdef CONFIG_BCM63XX_CPU_6358
+ &board_96358vw,
+ &board_96358vw2,
+ &board_AGPFS0,
+#endif
+};
+
+/*
+ * early init callback, read nvram data from flash and checksum it
+ */
+void __init board_prom_init(void)
+{
+ unsigned int check_len, i;
+ u8 *boot_addr, *cfe, *p;
+ char cfe_version[32];
+ u32 val;
+
+ /* read base address of boot chip select (0)
+ * 6345 does not have MPI but boots from standard
+ * MIPS Flash address */
+ if (BCMCPU_IS_6345())
+ val = 0x1fc00000;
+ else {
+ val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+ val &= MPI_CSBASE_BASE_MASK;
+ }
+ boot_addr = (u8 *)KSEG1ADDR(val);
+
+ /* dump cfe version */
+ cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET;
+ if (!memcmp(cfe, "cfe-v", 5))
+ snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u",
+ cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]);
+ else
+ strcpy(cfe_version, "unknown");
+ printk(KERN_INFO PFX "CFE version: %s\n", cfe_version);
+
+ /* extract nvram data */
+ memcpy(&nvram, boot_addr + BCM963XX_NVRAM_OFFSET, sizeof(nvram));
+
+ /* check checksum before using data */
+ if (nvram.version <= 4)
+ check_len = offsetof(struct bcm963xx_nvram, checksum_old);
+ else
+ check_len = sizeof(nvram);
+ val = 0;
+ p = (u8 *)&nvram;
+ while (check_len--)
+ val += *p;
+ if (val) {
+ printk(KERN_ERR PFX "invalid nvram checksum\n");
+ return;
+ }
+
+ /* find board by name */
+ for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) {
+ if (strncmp(nvram.name, bcm963xx_boards[i]->name,
+ sizeof(nvram.name)))
+ continue;
+ /* copy, board desc array is marked initdata */
+ memcpy(&board, bcm963xx_boards[i], sizeof(board));
+ break;
+ }
+
+ /* bail out if board is not found, will complain later */
+ if (!board.name[0]) {
+ char name[17];
+ memcpy(name, nvram.name, 16);
+ name[16] = 0;
+ printk(KERN_ERR PFX "unknown bcm963xx board: %s\n",
+ name);
+ return;
+ }
+
+ /* setup pin multiplexing depending on board enabled device,
+ * this has to be done this early since PCI init is done
+ * inside arch_initcall */
+ val = 0;
+
+#ifdef CONFIG_PCI
+ if (board.has_pci) {
+ bcm63xx_pci_enabled = 1;
+ if (BCMCPU_IS_6348())
+ val |= GPIO_MODE_6348_G2_PCI;
+ }
+#endif
+
+ if (board.has_pccard) {
+ if (BCMCPU_IS_6348())
+ val |= GPIO_MODE_6348_G1_MII_PCCARD;
+ }
+
+ if (board.has_enet0 && !board.enet0.use_internal_phy) {
+ if (BCMCPU_IS_6348())
+ val |= GPIO_MODE_6348_G3_EXT_MII |
+ GPIO_MODE_6348_G0_EXT_MII;
+ }
+
+ if (board.has_enet1 && !board.enet1.use_internal_phy) {
+ if (BCMCPU_IS_6348())
+ val |= GPIO_MODE_6348_G3_EXT_MII |
+ GPIO_MODE_6348_G0_EXT_MII;
+ }
+
+ bcm_gpio_writel(val, GPIO_MODE_REG);
+}
+
+/*
+ * second stage init callback, good time to panic if we couldn't
+ * identify on which board we're running since early printk is working
+ */
+void __init board_setup(void)
+{
+ if (!board.name[0])
+ panic("unable to detect bcm963xx board");
+ printk(KERN_INFO PFX "board name: %s\n", board.name);
+
+ /* make sure we're running on expected cpu */
+ if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
+ panic("unexpected CPU for bcm963xx board");
+}
+
+/*
+ * return board name for /proc/cpuinfo
+ */
+const char *board_get_name(void)
+{
+ return board.name;
+}
+
+/*
+ * register & return a new board mac address
+ */
+static int board_get_mac_address(u8 *mac)
+{
+ u8 *p;
+ int count;
+
+ if (mac_addr_used >= nvram.mac_addr_count) {
+ printk(KERN_ERR PFX "not enough mac address\n");
+ return -ENODEV;
+ }
+
+ memcpy(mac, nvram.mac_addr_base, ETH_ALEN);
+ p = mac + ETH_ALEN - 1;
+ count = mac_addr_used;
+
+ while (count--) {
+ do {
+ (*p)++;
+ if (*p != 0)
+ break;
+ p--;
+ } while (p != mac);
+ }
+
+ if (p == mac) {
+ printk(KERN_ERR PFX "unable to fetch mac address\n");
+ return -ENODEV;
+ }
+
+ mac_addr_used++;
+ return 0;
+}
+
+static struct mtd_partition mtd_partitions[] = {
+ {
+ .name = "cfe",
+ .offset = 0x0,
+ .size = 0x40000,
+ }
+};
+
+static struct physmap_flash_data flash_data = {
+ .width = 2,
+ .nr_parts = ARRAY_SIZE(mtd_partitions),
+ .parts = mtd_partitions,
+};
+
+static struct resource mtd_resources[] = {
+ {
+ .start = 0, /* filled at runtime */
+ .end = 0, /* filled at runtime */
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device mtd_dev = {
+ .name = "physmap-flash",
+ .resource = mtd_resources,
+ .num_resources = ARRAY_SIZE(mtd_resources),
+ .dev = {
+ .platform_data = &flash_data,
+ },
+};
+
+/*
+ * Register a sane SPROMv2 to make the on-board
+ * bcm4318 WLAN work
+ */
+#ifdef CONFIG_SSB_PCIHOST
+static struct ssb_sprom bcm63xx_sprom = {
+ .revision = 0x02,
+ .board_rev = 0x17,
+ .country_code = 0x0,
+ .ant_available_bg = 0x3,
+ .pa0b0 = 0x15ae,
+ .pa0b1 = 0xfa85,
+ .pa0b2 = 0xfe8d,
+ .pa1b0 = 0xffff,
+ .pa1b1 = 0xffff,
+ .pa1b2 = 0xffff,
+ .gpio0 = 0xff,
+ .gpio1 = 0xff,
+ .gpio2 = 0xff,
+ .gpio3 = 0xff,
+ .maxpwr_bg = 0x004c,
+ .itssi_bg = 0x00,
+ .boardflags_lo = 0x2848,
+ .boardflags_hi = 0x0000,
+};
+#endif
+
+static struct gpio_led_platform_data bcm63xx_led_data;
+
+static struct platform_device bcm63xx_gpio_leds = {
+ .name = "leds-gpio",
+ .id = 0,
+ .dev.platform_data = &bcm63xx_led_data,
+};
+
+/*
+ * third stage init callback, register all board devices.
+ */
+int __init board_register_devices(void)
+{
+ u32 val;
+
+ if (board.has_enet0 &&
+ !board_get_mac_address(board.enet0.mac_addr))
+ bcm63xx_enet_register(0, &board.enet0);
+
+ if (board.has_enet1 &&
+ !board_get_mac_address(board.enet1.mac_addr))
+ bcm63xx_enet_register(1, &board.enet1);
+
+ if (board.has_dsp)
+ bcm63xx_dsp_register(&board.dsp);
+
+ /* Generate MAC address for WLAN and
+ * register our SPROM */
+#ifdef CONFIG_SSB_PCIHOST
+ if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
+ memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+ memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+ if (ssb_arch_set_fallback_sprom(&bcm63xx_sprom) < 0)
+ printk(KERN_ERR "failed to register fallback SPROM\n");
+ }
+#endif
+
+ /* read base address of boot chip select (0) */
+ if (BCMCPU_IS_6345())
+ val = 0x1fc00000;
+ else {
+ val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+ val &= MPI_CSBASE_BASE_MASK;
+ }
+ mtd_resources[0].start = val;
+ mtd_resources[0].end = 0x1FFFFFFF;
+
+ platform_device_register(&mtd_dev);
+
+ bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
+ bcm63xx_led_data.leds = board.leds;
+
+ platform_device_register(&bcm63xx_gpio_leds);
+
+ return 0;
+}
+
diff --git a/arch/mips/bcm63xx/clk.c b/arch/mips/bcm63xx/clk.c
new file mode 100644
index 0000000..2c68ee9
--- /dev/null
+++ b/arch/mips/bcm63xx/clk.c
@@ -0,0 +1,226 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_clk.h>
+
+static DEFINE_MUTEX(clocks_mutex);
+
+
+static void clk_enable_unlocked(struct clk *clk)
+{
+ if (clk->set && (clk->usage++) == 0)
+ clk->set(clk, 1);
+}
+
+static void clk_disable_unlocked(struct clk *clk)
+{
+ if (clk->set && (--clk->usage) == 0)
+ clk->set(clk, 0);
+}
+
+static void bcm_hwclock_set(u32 mask, int enable)
+{
+ u32 reg;
+
+ reg = bcm_perf_readl(PERF_CKCTL_REG);
+ if (enable)
+ reg |= mask;
+ else
+ reg &= ~mask;
+ bcm_perf_writel(reg, PERF_CKCTL_REG);
+}
+
+/*
+ * Ethernet MAC "misc" clock: dma clocks and main clock on 6348
+ */
+static void enet_misc_set(struct clk *clk, int enable)
+{
+ u32 mask;
+
+ if (BCMCPU_IS_6338())
+ mask = CKCTL_6338_ENET_EN;
+ else if (BCMCPU_IS_6345())
+ mask = CKCTL_6345_ENET_EN;
+ else if (BCMCPU_IS_6348())
+ mask = CKCTL_6348_ENET_EN;
+ else
+ /* BCMCPU_IS_6358 */
+ mask = CKCTL_6358_EMUSB_EN;
+ bcm_hwclock_set(mask, enable);
+}
+
+static struct clk clk_enet_misc = {
+ .set = enet_misc_set,
+};
+
+/*
+ * Ethernet MAC clocks: only revelant on 6358, silently enable misc
+ * clocks
+ */
+static void enetx_set(struct clk *clk, int enable)
+{
+ if (enable)
+ clk_enable_unlocked(&clk_enet_misc);
+ else
+ clk_disable_unlocked(&clk_enet_misc);
+
+ if (BCMCPU_IS_6358()) {
+ u32 mask;
+
+ if (clk->id == 0)
+ mask = CKCTL_6358_ENET0_EN;
+ else
+ mask = CKCTL_6358_ENET1_EN;
+ bcm_hwclock_set(mask, enable);
+ }
+}
+
+static struct clk clk_enet0 = {
+ .id = 0,
+ .set = enetx_set,
+};
+
+static struct clk clk_enet1 = {
+ .id = 1,
+ .set = enetx_set,
+};
+
+/*
+ * Ethernet PHY clock
+ */
+static void ephy_set(struct clk *clk, int enable)
+{
+ if (!BCMCPU_IS_6358())
+ return;
+ bcm_hwclock_set(CKCTL_6358_EPHY_EN, enable);
+}
+
+
+static struct clk clk_ephy = {
+ .set = ephy_set,
+};
+
+/*
+ * PCM clock
+ */
+static void pcm_set(struct clk *clk, int enable)
+{
+ if (!BCMCPU_IS_6358())
+ return;
+ bcm_hwclock_set(CKCTL_6358_PCM_EN, enable);
+}
+
+static struct clk clk_pcm = {
+ .set = pcm_set,
+};
+
+/*
+ * USB host clock
+ */
+static void usbh_set(struct clk *clk, int enable)
+{
+ if (!BCMCPU_IS_6348())
+ return;
+ bcm_hwclock_set(CKCTL_6348_USBH_EN, enable);
+}
+
+static struct clk clk_usbh = {
+ .set = usbh_set,
+};
+
+/*
+ * SPI clock
+ */
+static void spi_set(struct clk *clk, int enable)
+{
+ u32 mask;
+
+ if (BCMCPU_IS_6338())
+ mask = CKCTL_6338_SPI_EN;
+ else if (BCMCPU_IS_6348())
+ mask = CKCTL_6348_SPI_EN;
+ else
+ /* BCMCPU_IS_6358 */
+ mask = CKCTL_6358_SPI_EN;
+ bcm_hwclock_set(mask, enable);
+}
+
+static struct clk clk_spi = {
+ .set = spi_set,
+};
+
+/*
+ * Internal peripheral clock
+ */
+static struct clk clk_periph = {
+ .rate = (50 * 1000 * 1000),
+};
+
+
+/*
+ * Linux clock API implementation
+ */
+int clk_enable(struct clk *clk)
+{
+ mutex_lock(&clocks_mutex);
+ clk_enable_unlocked(clk);
+ mutex_unlock(&clocks_mutex);
+ return 0;
+}
+
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+ mutex_lock(&clocks_mutex);
+ clk_disable_unlocked(clk);
+ mutex_unlock(&clocks_mutex);
+}
+
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+
+EXPORT_SYMBOL(clk_get_rate);
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+ if (!strcmp(id, "enet0"))
+ return &clk_enet0;
+ if (!strcmp(id, "enet1"))
+ return &clk_enet1;
+ if (!strcmp(id, "ephy"))
+ return &clk_ephy;
+ if (!strcmp(id, "usbh"))
+ return &clk_usbh;
+ if (!strcmp(id, "spi"))
+ return &clk_spi;
+ if (!strcmp(id, "periph"))
+ return &clk_periph;
+ if (BCMCPU_IS_6358() && !strcmp(id, "pcm"))
+ return &clk_pcm;
+ return ERR_PTR(-ENOENT);
+}
+
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+}
+
+EXPORT_SYMBOL(clk_put);
diff --git a/arch/mips/bcm63xx/cpu.c b/arch/mips/bcm63xx/cpu.c
new file mode 100644
index 0000000..6dc43f0
--- /dev/null
+++ b/arch/mips/bcm63xx/cpu.c
@@ -0,0 +1,345 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/cpu.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_irq.h>
+
+const unsigned long *bcm63xx_regs_base;
+EXPORT_SYMBOL(bcm63xx_regs_base);
+
+const int *bcm63xx_irqs;
+EXPORT_SYMBOL(bcm63xx_irqs);
+
+static u16 bcm63xx_cpu_id;
+static u16 bcm63xx_cpu_rev;
+static unsigned int bcm63xx_cpu_freq;
+static unsigned int bcm63xx_memory_size;
+
+/*
+ * 6338 register sets and irqs
+ */
+static const unsigned long bcm96338_regs_base[] = {
+ [RSET_DSL_LMEM] = BCM_6338_DSL_LMEM_BASE,
+ [RSET_PERF] = BCM_6338_PERF_BASE,
+ [RSET_TIMER] = BCM_6338_TIMER_BASE,
+ [RSET_WDT] = BCM_6338_WDT_BASE,
+ [RSET_UART0] = BCM_6338_UART0_BASE,
+ [RSET_GPIO] = BCM_6338_GPIO_BASE,
+ [RSET_SPI] = BCM_6338_SPI_BASE,
+ [RSET_OHCI0] = BCM_6338_OHCI0_BASE,
+ [RSET_OHCI_PRIV] = BCM_6338_OHCI_PRIV_BASE,
+ [RSET_USBH_PRIV] = BCM_6338_USBH_PRIV_BASE,
+ [RSET_UDC0] = BCM_6338_UDC0_BASE,
+ [RSET_MPI] = BCM_6338_MPI_BASE,
+ [RSET_PCMCIA] = BCM_6338_PCMCIA_BASE,
+ [RSET_SDRAM] = BCM_6338_SDRAM_BASE,
+ [RSET_DSL] = BCM_6338_DSL_BASE,
+ [RSET_ENET0] = BCM_6338_ENET0_BASE,
+ [RSET_ENET1] = BCM_6338_ENET1_BASE,
+ [RSET_ENETDMA] = BCM_6338_ENETDMA_BASE,
+ [RSET_MEMC] = BCM_6338_MEMC_BASE,
+ [RSET_DDR] = BCM_6338_DDR_BASE,
+};
+
+static const int bcm96338_irqs[] = {
+ [IRQ_TIMER] = BCM_6338_TIMER_IRQ,
+ [IRQ_UART0] = BCM_6338_UART0_IRQ,
+ [IRQ_DSL] = BCM_6338_DSL_IRQ,
+ [IRQ_ENET0] = BCM_6338_ENET0_IRQ,
+ [IRQ_ENET_PHY] = BCM_6338_ENET_PHY_IRQ,
+ [IRQ_ENET0_RXDMA] = BCM_6338_ENET0_RXDMA_IRQ,
+ [IRQ_ENET0_TXDMA] = BCM_6338_ENET0_TXDMA_IRQ,
+};
+
+/*
+ * 6345 register sets and irqs
+ */
+static const unsigned long bcm96345_regs_base[] = {
+ [RSET_DSL_LMEM] = BCM_6345_DSL_LMEM_BASE,
+ [RSET_PERF] = BCM_6345_PERF_BASE,
+ [RSET_TIMER] = BCM_6345_TIMER_BASE,
+ [RSET_WDT] = BCM_6345_WDT_BASE,
+ [RSET_UART0] = BCM_6345_UART0_BASE,
+ [RSET_GPIO] = BCM_6345_GPIO_BASE,
+ [RSET_SPI] = BCM_6345_SPI_BASE,
+ [RSET_UDC0] = BCM_6345_UDC0_BASE,
+ [RSET_OHCI0] = BCM_6345_OHCI0_BASE,
+ [RSET_OHCI_PRIV] = BCM_6345_OHCI_PRIV_BASE,
+ [RSET_USBH_PRIV] = BCM_6345_USBH_PRIV_BASE,
+ [RSET_MPI] = BCM_6345_MPI_BASE,
+ [RSET_PCMCIA] = BCM_6345_PCMCIA_BASE,
+ [RSET_DSL] = BCM_6345_DSL_BASE,
+ [RSET_ENET0] = BCM_6345_ENET0_BASE,
+ [RSET_ENET1] = BCM_6345_ENET1_BASE,
+ [RSET_ENETDMA] = BCM_6345_ENETDMA_BASE,
+ [RSET_EHCI0] = BCM_6345_EHCI0_BASE,
+ [RSET_SDRAM] = BCM_6345_SDRAM_BASE,
+ [RSET_MEMC] = BCM_6345_MEMC_BASE,
+ [RSET_DDR] = BCM_6345_DDR_BASE,
+};
+
+static const int bcm96345_irqs[] = {
+ [IRQ_TIMER] = BCM_6345_TIMER_IRQ,
+ [IRQ_UART0] = BCM_6345_UART0_IRQ,
+ [IRQ_DSL] = BCM_6345_DSL_IRQ,
+ [IRQ_ENET0] = BCM_6345_ENET0_IRQ,
+ [IRQ_ENET_PHY] = BCM_6345_ENET_PHY_IRQ,
+ [IRQ_ENET0_RXDMA] = BCM_6345_ENET0_RXDMA_IRQ,
+ [IRQ_ENET0_TXDMA] = BCM_6345_ENET0_TXDMA_IRQ,
+};
+
+/*
+ * 6348 register sets and irqs
+ */
+static const unsigned long bcm96348_regs_base[] = {
+ [RSET_DSL_LMEM] = BCM_6348_DSL_LMEM_BASE,
+ [RSET_PERF] = BCM_6348_PERF_BASE,
+ [RSET_TIMER] = BCM_6348_TIMER_BASE,
+ [RSET_WDT] = BCM_6348_WDT_BASE,
+ [RSET_UART0] = BCM_6348_UART0_BASE,
+ [RSET_GPIO] = BCM_6348_GPIO_BASE,
+ [RSET_SPI] = BCM_6348_SPI_BASE,
+ [RSET_OHCI0] = BCM_6348_OHCI0_BASE,
+ [RSET_OHCI_PRIV] = BCM_6348_OHCI_PRIV_BASE,
+ [RSET_USBH_PRIV] = BCM_6348_USBH_PRIV_BASE,
+ [RSET_MPI] = BCM_6348_MPI_BASE,
+ [RSET_PCMCIA] = BCM_6348_PCMCIA_BASE,
+ [RSET_SDRAM] = BCM_6348_SDRAM_BASE,
+ [RSET_DSL] = BCM_6348_DSL_BASE,
+ [RSET_ENET0] = BCM_6348_ENET0_BASE,
+ [RSET_ENET1] = BCM_6348_ENET1_BASE,
+ [RSET_ENETDMA] = BCM_6348_ENETDMA_BASE,
+ [RSET_MEMC] = BCM_6348_MEMC_BASE,
+ [RSET_DDR] = BCM_6348_DDR_BASE,
+};
+
+static const int bcm96348_irqs[] = {
+ [IRQ_TIMER] = BCM_6348_TIMER_IRQ,
+ [IRQ_UART0] = BCM_6348_UART0_IRQ,
+ [IRQ_DSL] = BCM_6348_DSL_IRQ,
+ [IRQ_ENET0] = BCM_6348_ENET0_IRQ,
+ [IRQ_ENET1] = BCM_6348_ENET1_IRQ,
+ [IRQ_ENET_PHY] = BCM_6348_ENET_PHY_IRQ,
+ [IRQ_OHCI0] = BCM_6348_OHCI0_IRQ,
+ [IRQ_PCMCIA] = BCM_6348_PCMCIA_IRQ,
+ [IRQ_ENET0_RXDMA] = BCM_6348_ENET0_RXDMA_IRQ,
+ [IRQ_ENET0_TXDMA] = BCM_6348_ENET0_TXDMA_IRQ,
+ [IRQ_ENET1_RXDMA] = BCM_6348_ENET1_RXDMA_IRQ,
+ [IRQ_ENET1_TXDMA] = BCM_6348_ENET1_TXDMA_IRQ,
+ [IRQ_PCI] = BCM_6348_PCI_IRQ,
+};
+
+/*
+ * 6358 register sets and irqs
+ */
+static const unsigned long bcm96358_regs_base[] = {
+ [RSET_DSL_LMEM] = BCM_6358_DSL_LMEM_BASE,
+ [RSET_PERF] = BCM_6358_PERF_BASE,
+ [RSET_TIMER] = BCM_6358_TIMER_BASE,
+ [RSET_WDT] = BCM_6358_WDT_BASE,
+ [RSET_UART0] = BCM_6358_UART0_BASE,
+ [RSET_GPIO] = BCM_6358_GPIO_BASE,
+ [RSET_SPI] = BCM_6358_SPI_BASE,
+ [RSET_OHCI0] = BCM_6358_OHCI0_BASE,
+ [RSET_EHCI0] = BCM_6358_EHCI0_BASE,
+ [RSET_OHCI_PRIV] = BCM_6358_OHCI_PRIV_BASE,
+ [RSET_USBH_PRIV] = BCM_6358_USBH_PRIV_BASE,
+ [RSET_MPI] = BCM_6358_MPI_BASE,
+ [RSET_PCMCIA] = BCM_6358_PCMCIA_BASE,
+ [RSET_SDRAM] = BCM_6358_SDRAM_BASE,
+ [RSET_DSL] = BCM_6358_DSL_BASE,
+ [RSET_ENET0] = BCM_6358_ENET0_BASE,
+ [RSET_ENET1] = BCM_6358_ENET1_BASE,
+ [RSET_ENETDMA] = BCM_6358_ENETDMA_BASE,
+ [RSET_MEMC] = BCM_6358_MEMC_BASE,
+ [RSET_DDR] = BCM_6358_DDR_BASE,
+};
+
+static const int bcm96358_irqs[] = {
+ [IRQ_TIMER] = BCM_6358_TIMER_IRQ,
+ [IRQ_UART0] = BCM_6358_UART0_IRQ,
+ [IRQ_DSL] = BCM_6358_DSL_IRQ,
+ [IRQ_ENET0] = BCM_6358_ENET0_IRQ,
+ [IRQ_ENET1] = BCM_6358_ENET1_IRQ,
+ [IRQ_ENET_PHY] = BCM_6358_ENET_PHY_IRQ,
+ [IRQ_OHCI0] = BCM_6358_OHCI0_IRQ,
+ [IRQ_EHCI0] = BCM_6358_EHCI0_IRQ,
+ [IRQ_PCMCIA] = BCM_6358_PCMCIA_IRQ,
+ [IRQ_ENET0_RXDMA] = BCM_6358_ENET0_RXDMA_IRQ,
+ [IRQ_ENET0_TXDMA] = BCM_6358_ENET0_TXDMA_IRQ,
+ [IRQ_ENET1_RXDMA] = BCM_6358_ENET1_RXDMA_IRQ,
+ [IRQ_ENET1_TXDMA] = BCM_6358_ENET1_TXDMA_IRQ,
+ [IRQ_PCI] = BCM_6358_PCI_IRQ,
+};
+
+u16 __bcm63xx_get_cpu_id(void)
+{
+ return bcm63xx_cpu_id;
+}
+
+EXPORT_SYMBOL(__bcm63xx_get_cpu_id);
+
+u16 bcm63xx_get_cpu_rev(void)
+{
+ return bcm63xx_cpu_rev;
+}
+
+EXPORT_SYMBOL(bcm63xx_get_cpu_rev);
+
+unsigned int bcm63xx_get_cpu_freq(void)
+{
+ return bcm63xx_cpu_freq;
+}
+
+unsigned int bcm63xx_get_memory_size(void)
+{
+ return bcm63xx_memory_size;
+}
+
+static unsigned int detect_cpu_clock(void)
+{
+ unsigned int tmp, n1 = 0, n2 = 0, m1 = 0;
+
+ /* BCM6338 has a fixed 240 Mhz frequency */
+ if (BCMCPU_IS_6338())
+ return 240000000;
+
+ /* BCM6345 has a fixed 140Mhz frequency */
+ if (BCMCPU_IS_6345())
+ return 140000000;
+
+ /*
+ * frequency depends on PLL configuration:
+ */
+ if (BCMCPU_IS_6348()) {
+ /* 16MHz * (N1 + 1) * (N2 + 2) / (M1_CPU + 1) */
+ tmp = bcm_perf_readl(PERF_MIPSPLLCTL_REG);
+ n1 = (tmp & MIPSPLLCTL_N1_MASK) >> MIPSPLLCTL_N1_SHIFT;
+ n2 = (tmp & MIPSPLLCTL_N2_MASK) >> MIPSPLLCTL_N2_SHIFT;
+ m1 = (tmp & MIPSPLLCTL_M1CPU_MASK) >> MIPSPLLCTL_M1CPU_SHIFT;
+ n1 += 1;
+ n2 += 2;
+ m1 += 1;
+ }
+
+ if (BCMCPU_IS_6358()) {
+ /* 16MHz * N1 * N2 / M1_CPU */
+ tmp = bcm_ddr_readl(DDR_DMIPSPLLCFG_REG);
+ n1 = (tmp & DMIPSPLLCFG_N1_MASK) >> DMIPSPLLCFG_N1_SHIFT;
+ n2 = (tmp & DMIPSPLLCFG_N2_MASK) >> DMIPSPLLCFG_N2_SHIFT;
+ m1 = (tmp & DMIPSPLLCFG_M1_MASK) >> DMIPSPLLCFG_M1_SHIFT;
+ }
+
+ return (16 * 1000000 * n1 * n2) / m1;
+}
+
+/*
+ * attempt to detect the amount of memory installed
+ */
+static unsigned int detect_memory_size(void)
+{
+ unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
+ u32 val;
+
+ if (BCMCPU_IS_6345())
+ return (8 * 1024 * 1024);
+
+ if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) {
+ val = bcm_sdram_readl(SDRAM_CFG_REG);
+ rows = (val & SDRAM_CFG_ROW_MASK) >> SDRAM_CFG_ROW_SHIFT;
+ cols = (val & SDRAM_CFG_COL_MASK) >> SDRAM_CFG_COL_SHIFT;
+ is_32bits = (val & SDRAM_CFG_32B_MASK) ? 1 : 0;
+ banks = (val & SDRAM_CFG_BANK_MASK) ? 2 : 1;
+ }
+
+ if (BCMCPU_IS_6358()) {
+ val = bcm_memc_readl(MEMC_CFG_REG);
+ rows = (val & MEMC_CFG_ROW_MASK) >> MEMC_CFG_ROW_SHIFT;
+ cols = (val & MEMC_CFG_COL_MASK) >> MEMC_CFG_COL_SHIFT;
+ is_32bits = (val & MEMC_CFG_32B_MASK) ? 0 : 1;
+ banks = 2;
+ }
+
+ /* 0 => 11 address bits ... 2 => 13 address bits */
+ rows += 11;
+
+ /* 0 => 8 address bits ... 2 => 10 address bits */
+ cols += 8;
+
+ return 1 << (cols + rows + (is_32bits + 1) + banks);
+}
+
+void __init bcm63xx_cpu_init(void)
+{
+ unsigned int tmp, expected_cpu_id;
+ struct cpuinfo_mips *c = ¤t_cpu_data;
+
+ /* soc registers location depends on cpu type */
+ expected_cpu_id = 0;
+
+ switch (c->cputype) {
+ /*
+ * BCM6338 as the same PrId as BCM3302 see arch/mips/kernel/cpu-probe.c
+ */
+ case CPU_BCM3302:
+ expected_cpu_id = BCM6338_CPU_ID;
+ bcm63xx_regs_base = bcm96338_regs_base;
+ bcm63xx_irqs = bcm96338_irqs;
+ break;
+ case CPU_BCM6345:
+ expected_cpu_id = BCM6345_CPU_ID;
+ bcm63xx_regs_base = bcm96345_regs_base;
+ bcm63xx_irqs = bcm96345_irqs;
+ break;
+ case CPU_BCM6348:
+ expected_cpu_id = BCM6348_CPU_ID;
+ bcm63xx_regs_base = bcm96348_regs_base;
+ bcm63xx_irqs = bcm96348_irqs;
+ break;
+ case CPU_BCM6358:
+ expected_cpu_id = BCM6358_CPU_ID;
+ bcm63xx_regs_base = bcm96358_regs_base;
+ bcm63xx_irqs = bcm96358_irqs;
+ break;
+ }
+
+ /*
+ * really early to panic, but delaying panic would not help since we
+ * will never get any working console
+ */
+ if (!expected_cpu_id)
+ panic("unsupported Broadcom CPU");
+
+ /*
+ * bcm63xx_regs_base is set, we can access soc registers
+ */
+
+ /* double check CPU type */
+ tmp = bcm_perf_readl(PERF_REV_REG);
+ bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
+ bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
+
+ if (bcm63xx_cpu_id != expected_cpu_id)
+ panic("bcm63xx CPU id mismatch");
+
+ bcm63xx_cpu_freq = detect_cpu_clock();
+ bcm63xx_memory_size = detect_memory_size();
+
+ printk(KERN_INFO "Detected Broadcom 0x%04x CPU revision %02x\n",
+ bcm63xx_cpu_id, bcm63xx_cpu_rev);
+ printk(KERN_INFO "CPU frequency is %u MHz\n",
+ bcm63xx_cpu_freq / 1000000);
+ printk(KERN_INFO "%uMB of RAM installed\n",
+ bcm63xx_memory_size >> 20);
+}
diff --git a/arch/mips/bcm63xx/cs.c b/arch/mips/bcm63xx/cs.c
new file mode 100644
index 0000000..50d8190
--- /dev/null
+++ b/arch/mips/bcm63xx/cs.c
@@ -0,0 +1,144 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/log2.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_cs.h>
+
+static DEFINE_SPINLOCK(bcm63xx_cs_lock);
+
+/*
+ * check if given chip select exists
+ */
+static int is_valid_cs(unsigned int cs)
+{
+ if (cs > 6)
+ return 0;
+ return 1;
+}
+
+/*
+ * Configure chipselect base address and size (bytes).
+ * Size must be a power of two between 8k and 256M.
+ */
+int bcm63xx_set_cs_base(unsigned int cs, u32 base, unsigned int size)
+{
+ unsigned long flags;
+ u32 val;
+
+ if (!is_valid_cs(cs))
+ return -EINVAL;
+
+ /* sanity check on size */
+ if (size != roundup_pow_of_two(size))
+ return -EINVAL;
+
+ if (size < 8 * 1024 || size > 256 * 1024 * 1024)
+ return -EINVAL;
+
+ val = (base & MPI_CSBASE_BASE_MASK);
+ /* 8k => 0 - 256M => 15 */
+ val |= (ilog2(size) - ilog2(8 * 1024)) << MPI_CSBASE_SIZE_SHIFT;
+
+ spin_lock_irqsave(&bcm63xx_cs_lock, flags);
+ bcm_mpi_writel(val, MPI_CSBASE_REG(cs));
+ spin_unlock_irqrestore(&bcm63xx_cs_lock, flags);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(bcm63xx_set_cs_base);
+
+/*
+ * configure chipselect timing (ns)
+ */
+int bcm63xx_set_cs_timing(unsigned int cs, unsigned int wait,
+ unsigned int setup, unsigned int hold)
+{
+ unsigned long flags;
+ u32 val;
+
+ if (!is_valid_cs(cs))
+ return -EINVAL;
+
+ spin_lock_irqsave(&bcm63xx_cs_lock, flags);
+ val = bcm_mpi_readl(MPI_CSCTL_REG(cs));
+ val &= ~(MPI_CSCTL_WAIT_MASK);
+ val &= ~(MPI_CSCTL_SETUP_MASK);
+ val &= ~(MPI_CSCTL_HOLD_MASK);
+ val |= wait << MPI_CSCTL_WAIT_SHIFT;
+ val |= setup << MPI_CSCTL_SETUP_SHIFT;
+ val |= hold << MPI_CSCTL_HOLD_SHIFT;
+ bcm_mpi_writel(val, MPI_CSCTL_REG(cs));
+ spin_unlock_irqrestore(&bcm63xx_cs_lock, flags);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(bcm63xx_set_cs_timing);
+
+/*
+ * configure other chipselect parameter (data bus size, ...)
+ */
+int bcm63xx_set_cs_param(unsigned int cs, u32 params)
+{
+ unsigned long flags;
+ u32 val;
+
+ if (!is_valid_cs(cs))
+ return -EINVAL;
+
+ /* none of this fields apply to pcmcia */
+ if (cs == MPI_CS_PCMCIA_COMMON ||
+ cs == MPI_CS_PCMCIA_ATTR ||
+ cs == MPI_CS_PCMCIA_IO)
+ return -EINVAL;
+
+ spin_lock_irqsave(&bcm63xx_cs_lock, flags);
+ val = bcm_mpi_readl(MPI_CSCTL_REG(cs));
+ val &= ~(MPI_CSCTL_DATA16_MASK);
+ val &= ~(MPI_CSCTL_SYNCMODE_MASK);
+ val &= ~(MPI_CSCTL_TSIZE_MASK);
+ val &= ~(MPI_CSCTL_ENDIANSWAP_MASK);
+ val |= params;
+ bcm_mpi_writel(val, MPI_CSCTL_REG(cs));
+ spin_unlock_irqrestore(&bcm63xx_cs_lock, flags);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(bcm63xx_set_cs_param);
+
+/*
+ * set cs status (enable/disable)
+ */
+int bcm63xx_set_cs_status(unsigned int cs, int enable)
+{
+ unsigned long flags;
+ u32 val;
+
+ if (!is_valid_cs(cs))
+ return -EINVAL;
+
+ spin_lock_irqsave(&bcm63xx_cs_lock, flags);
+ val = bcm_mpi_readl(MPI_CSCTL_REG(cs));
+ if (enable)
+ val |= MPI_CSCTL_ENABLE_MASK;
+ else
+ val &= ~MPI_CSCTL_ENABLE_MASK;
+ bcm_mpi_writel(val, MPI_CSCTL_REG(cs));
+ spin_unlock_irqrestore(&bcm63xx_cs_lock, flags);
+ return 0;
+}
+
+EXPORT_SYMBOL(bcm63xx_set_cs_status);
diff --git a/arch/mips/bcm63xx/dev-dsp.c b/arch/mips/bcm63xx/dev-dsp.c
new file mode 100644
index 0000000..da46d1d
--- /dev/null
+++ b/arch/mips/bcm63xx/dev-dsp.c
@@ -0,0 +1,56 @@
+/*
+ * Broadcom BCM63xx VoIP DSP registration
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_dev_dsp.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_io.h>
+
+static struct resource voip_dsp_resources[] = {
+ {
+ .start = -1, /* filled at runtime */
+ .end = -1, /* filled at runtime */
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = -1, /* filled at runtime */
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bcm63xx_voip_dsp_device = {
+ .name = "bcm63xx-voip-dsp",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(voip_dsp_resources),
+ .resource = voip_dsp_resources,
+};
+
+int __init bcm63xx_dsp_register(const struct bcm63xx_dsp_platform_data *pd)
+{
+ struct bcm63xx_dsp_platform_data *dpd;
+ u32 val;
+
+ /* Get the memory window */
+ val = bcm_mpi_readl(MPI_CSBASE_REG(pd->cs - 1));
+ val &= MPI_CSBASE_BASE_MASK;
+ voip_dsp_resources[0].start = val;
+ voip_dsp_resources[0].end = val + 0xFFFFFFF;
+ voip_dsp_resources[1].start = pd->ext_irq;
+
+ /* copy given platform data */
+ dpd = bcm63xx_voip_dsp_device.dev.platform_data;
+ memcpy(dpd, pd, sizeof (*pd));
+
+ return platform_device_register(&bcm63xx_voip_dsp_device);
+}
diff --git a/arch/mips/bcm63xx/early_printk.c b/arch/mips/bcm63xx/early_printk.c
new file mode 100644
index 0000000..bf353c9
--- /dev/null
+++ b/arch/mips/bcm63xx/early_printk.c
@@ -0,0 +1,30 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/init.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_regs.h>
+
+static void __init wait_xfered(void)
+{
+ unsigned int val;
+
+ /* wait for any previous char to be transmitted */
+ do {
+ val = bcm_uart0_readl(UART_IR_REG);
+ if (val & UART_IR_STAT(UART_IR_TXEMPTY))
+ break;
+ } while (1);
+}
+
+void __init prom_putchar(char c)
+{
+ wait_xfered();
+ bcm_uart0_writel(c, UART_FIFO_REG);
+ wait_xfered();
+}
diff --git a/arch/mips/bcm63xx/gpio.c b/arch/mips/bcm63xx/gpio.c
new file mode 100644
index 0000000..87ca390
--- /dev/null
+++ b/arch/mips/bcm63xx/gpio.c
@@ -0,0 +1,134 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_gpio.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_regs.h>
+
+static DEFINE_SPINLOCK(bcm63xx_gpio_lock);
+static u32 gpio_out_low, gpio_out_high;
+
+static void bcm63xx_gpio_set(struct gpio_chip *chip,
+ unsigned gpio, int val)
+{
+ u32 reg;
+ u32 mask;
+ u32 *v;
+ unsigned long flags;
+
+ if (gpio >= chip->ngpio)
+ BUG();
+
+ if (gpio < 32) {
+ reg = GPIO_DATA_LO_REG;
+ mask = 1 << gpio;
+ v = &gpio_out_low;
+ } else {
+ reg = GPIO_DATA_HI_REG;
+ mask = 1 << (gpio - 32);
+ v = &gpio_out_high;
+ }
+
+ spin_lock_irqsave(&bcm63xx_gpio_lock, flags);
+ if (val)
+ *v |= mask;
+ else
+ *v &= ~mask;
+ bcm_gpio_writel(*v, reg);
+ spin_unlock_irqrestore(&bcm63xx_gpio_lock, flags);
+}
+
+static int bcm63xx_gpio_get(struct gpio_chip *chip, unsigned gpio)
+{
+ u32 reg;
+ u32 mask;
+
+ if (gpio >= chip->ngpio)
+ BUG();
+
+ if (gpio < 32) {
+ reg = GPIO_DATA_LO_REG;
+ mask = 1 << gpio;
+ } else {
+ reg = GPIO_DATA_HI_REG;
+ mask = 1 << (gpio - 32);
+ }
+
+ return !!(bcm_gpio_readl(reg) & mask);
+}
+
+static int bcm63xx_gpio_set_direction(struct gpio_chip *chip,
+ unsigned gpio, int dir)
+{
+ u32 reg;
+ u32 mask;
+ u32 tmp;
+ unsigned long flags;
+
+ if (gpio >= chip->ngpio)
+ BUG();
+
+ if (gpio < 32) {
+ reg = GPIO_CTL_LO_REG;
+ mask = 1 << gpio;
+ } else {
+ reg = GPIO_CTL_HI_REG;
+ mask = 1 << (gpio - 32);
+ }
+
+ spin_lock_irqsave(&bcm63xx_gpio_lock, flags);
+ tmp = bcm_gpio_readl(reg);
+ if (dir == GPIO_DIR_IN)
+ tmp &= ~mask;
+ else
+ tmp |= mask;
+ bcm_gpio_writel(tmp, reg);
+ spin_unlock_irqrestore(&bcm63xx_gpio_lock, flags);
+
+ return 0;
+}
+
+static int bcm63xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+ return bcm63xx_gpio_set_direction(chip, gpio, GPIO_DIR_IN);
+}
+
+static int bcm63xx_gpio_direction_output(struct gpio_chip *chip,
+ unsigned gpio, int value)
+{
+ bcm63xx_gpio_set(chip, gpio, value);
+ return bcm63xx_gpio_set_direction(chip, gpio, GPIO_DIR_OUT);
+}
+
+
+static struct gpio_chip bcm63xx_gpio_chip = {
+ .label = "bcm63xx-gpio",
+ .direction_input = bcm63xx_gpio_direction_input,
+ .direction_output = bcm63xx_gpio_direction_output,
+ .get = bcm63xx_gpio_get,
+ .set = bcm63xx_gpio_set,
+ .base = 0,
+};
+
+int __init bcm63xx_gpio_init(void)
+{
+ bcm63xx_gpio_chip.ngpio = bcm63xx_gpio_count();
+ pr_info("registering %d GPIOs\n", bcm63xx_gpio_chip.ngpio);
+
+ return gpiochip_add(&bcm63xx_gpio_chip);
+}
+
+arch_initcall(bcm63xx_gpio_init);
diff --git a/arch/mips/bcm63xx/irq.c b/arch/mips/bcm63xx/irq.c
new file mode 100644
index 0000000..a0c5cd1
--- /dev/null
+++ b/arch/mips/bcm63xx/irq.c
@@ -0,0 +1,253 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ * Copyright (C) 2008 Nicolas Schichan <nschichan@freebox.fr>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <asm/irq_cpu.h>
+#include <asm/mipsregs.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_irq.h>
+
+/*
+ * dispatch internal devices IRQ (uart, enet, watchdog, ...). do not
+ * prioritize any interrupt relatively to another. the static counter
+ * will resume the loop where it ended the last time we left this
+ * function.
+ */
+static void bcm63xx_irq_dispatch_internal(void)
+{
+ u32 pending;
+ static int i;
+
+ pending = bcm_perf_readl(PERF_IRQMASK_REG) &
+ bcm_perf_readl(PERF_IRQSTAT_REG);
+
+ if (!pending)
+ return ;
+
+ while (1) {
+ int to_call = i;
+
+ i = (i + 1) & 0x1f;
+ if (pending & (1 << to_call)) {
+ do_IRQ(to_call + IRQ_INTERNAL_BASE);
+ break;
+ }
+ }
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+ u32 cause;
+
+ do {
+ cause = read_c0_cause() & read_c0_status() & ST0_IM;
+
+ if (!cause)
+ break;
+
+ if (cause & CAUSEF_IP7)
+ do_IRQ(7);
+ if (cause & CAUSEF_IP2)
+ bcm63xx_irq_dispatch_internal();
+ if (cause & CAUSEF_IP3)
+ do_IRQ(IRQ_EXT_0);
+ if (cause & CAUSEF_IP4)
+ do_IRQ(IRQ_EXT_1);
+ if (cause & CAUSEF_IP5)
+ do_IRQ(IRQ_EXT_2);
+ if (cause & CAUSEF_IP6)
+ do_IRQ(IRQ_EXT_3);
+ } while (1);
+}
+
+/*
+ * internal IRQs operations: only mask/unmask on PERF irq mask
+ * register.
+ */
+static inline void bcm63xx_internal_irq_mask(unsigned int irq)
+{
+ u32 mask;
+
+ irq -= IRQ_INTERNAL_BASE;
+ mask = bcm_perf_readl(PERF_IRQMASK_REG);
+ mask &= ~(1 << irq);
+ bcm_perf_writel(mask, PERF_IRQMASK_REG);
+}
+
+static void bcm63xx_internal_irq_unmask(unsigned int irq)
+{
+ u32 mask;
+
+ irq -= IRQ_INTERNAL_BASE;
+ mask = bcm_perf_readl(PERF_IRQMASK_REG);
+ mask |= (1 << irq);
+ bcm_perf_writel(mask, PERF_IRQMASK_REG);
+}
+
+static unsigned int bcm63xx_internal_irq_startup(unsigned int irq)
+{
+ bcm63xx_internal_irq_unmask(irq);
+ return 0;
+}
+
+/*
+ * external IRQs operations: mask/unmask and clear on PERF external
+ * irq control register.
+ */
+static void bcm63xx_external_irq_mask(unsigned int irq)
+{
+ u32 reg;
+
+ irq -= IRQ_EXT_BASE;
+ reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG);
+ reg &= ~EXTIRQ_CFG_MASK(irq);
+ bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG);
+}
+
+static void bcm63xx_external_irq_unmask(unsigned int irq)
+{
+ u32 reg;
+
+ irq -= IRQ_EXT_BASE;
+ reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG);
+ reg |= EXTIRQ_CFG_MASK(irq);
+ bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG);
+}
+
+static void bcm63xx_external_irq_clear(unsigned int irq)
+{
+ u32 reg;
+
+ irq -= IRQ_EXT_BASE;
+ reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG);
+ reg |= EXTIRQ_CFG_CLEAR(irq);
+ bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG);
+}
+
+static unsigned int bcm63xx_external_irq_startup(unsigned int irq)
+{
+ set_c0_status(0x100 << (irq - IRQ_MIPS_BASE));
+ irq_enable_hazard();
+ bcm63xx_external_irq_unmask(irq);
+ return 0;
+}
+
+static void bcm63xx_external_irq_shutdown(unsigned int irq)
+{
+ bcm63xx_external_irq_mask(irq);
+ clear_c0_status(0x100 << (irq - IRQ_MIPS_BASE));
+ irq_disable_hazard();
+}
+
+static int bcm63xx_external_irq_set_type(unsigned int irq,
+ unsigned int flow_type)
+{
+ u32 reg;
+ struct irq_desc *desc = irq_desc + irq;
+
+ irq -= IRQ_EXT_BASE;
+
+ flow_type &= IRQ_TYPE_SENSE_MASK;
+
+ if (flow_type == IRQ_TYPE_NONE)
+ flow_type = IRQ_TYPE_LEVEL_LOW;
+
+ reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG);
+ switch (flow_type) {
+ case IRQ_TYPE_EDGE_BOTH:
+ reg &= ~EXTIRQ_CFG_LEVELSENSE(irq);
+ reg |= EXTIRQ_CFG_BOTHEDGE(irq);
+ break;
+
+ case IRQ_TYPE_EDGE_RISING:
+ reg &= ~EXTIRQ_CFG_LEVELSENSE(irq);
+ reg |= EXTIRQ_CFG_SENSE(irq);
+ reg &= ~EXTIRQ_CFG_BOTHEDGE(irq);
+ break;
+
+ case IRQ_TYPE_EDGE_FALLING:
+ reg &= ~EXTIRQ_CFG_LEVELSENSE(irq);
+ reg &= ~EXTIRQ_CFG_SENSE(irq);
+ reg &= ~EXTIRQ_CFG_BOTHEDGE(irq);
+ break;
+
+ case IRQ_TYPE_LEVEL_HIGH:
+ reg |= EXTIRQ_CFG_LEVELSENSE(irq);
+ reg |= EXTIRQ_CFG_SENSE(irq);
+ break;
+
+ case IRQ_TYPE_LEVEL_LOW:
+ reg |= EXTIRQ_CFG_LEVELSENSE(irq);
+ reg &= ~EXTIRQ_CFG_SENSE(irq);
+ break;
+
+ default:
+ printk(KERN_ERR "bogus flow type combination given !\n");
+ return -EINVAL;
+ }
+ bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG);
+
+ if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) {
+ desc->status |= IRQ_LEVEL;
+ desc->handle_irq = handle_level_irq;
+ } else {
+ desc->handle_irq = handle_edge_irq;
+ }
+
+ return 0;
+}
+
+static struct irq_chip bcm63xx_internal_irq_chip = {
+ .name = "bcm63xx_ipic",
+ .startup = bcm63xx_internal_irq_startup,
+ .shutdown = bcm63xx_internal_irq_mask,
+
+ .mask = bcm63xx_internal_irq_mask,
+ .mask_ack = bcm63xx_internal_irq_mask,
+ .unmask = bcm63xx_internal_irq_unmask,
+};
+
+static struct irq_chip bcm63xx_external_irq_chip = {
+ .name = "bcm63xx_epic",
+ .startup = bcm63xx_external_irq_startup,
+ .shutdown = bcm63xx_external_irq_shutdown,
+
+ .ack = bcm63xx_external_irq_clear,
+
+ .mask = bcm63xx_external_irq_mask,
+ .unmask = bcm63xx_external_irq_unmask,
+
+ .set_type = bcm63xx_external_irq_set_type,
+};
+
+static struct irqaction cpu_ip2_cascade_action = {
+ .handler = no_action,
+ .name = "cascade_ip2",
+};
+
+void __init arch_init_irq(void)
+{
+ int i;
+
+ mips_cpu_irq_init();
+ for (i = IRQ_INTERNAL_BASE; i < NR_IRQS; ++i)
+ set_irq_chip_and_handler(i, &bcm63xx_internal_irq_chip,
+ handle_level_irq);
+
+ for (i = IRQ_EXT_BASE; i < IRQ_EXT_BASE + 4; ++i)
+ set_irq_chip_and_handler(i, &bcm63xx_external_irq_chip,
+ handle_edge_irq);
+
+ setup_irq(IRQ_MIPS_BASE + 2, &cpu_ip2_cascade_action);
+}
diff --git a/arch/mips/bcm63xx/prom.c b/arch/mips/bcm63xx/prom.c
new file mode 100644
index 0000000..fb284fb
--- /dev/null
+++ b/arch/mips/bcm63xx/prom.c
@@ -0,0 +1,55 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <asm/bootinfo.h>
+#include <bcm63xx_board.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_gpio.h>
+
+void __init prom_init(void)
+{
+ u32 reg, mask;
+
+ bcm63xx_cpu_init();
+
+ /* stop any running watchdog */
+ bcm_wdt_writel(WDT_STOP_1, WDT_CTL_REG);
+ bcm_wdt_writel(WDT_STOP_2, WDT_CTL_REG);
+
+ /* disable all hardware blocks clock for now */
+ if (BCMCPU_IS_6338())
+ mask = CKCTL_6338_ALL_SAFE_EN;
+ else if (BCMCPU_IS_6345())
+ mask = CKCTL_6345_ALL_SAFE_EN;
+ else if (BCMCPU_IS_6348())
+ mask = CKCTL_6348_ALL_SAFE_EN;
+ else
+ /* BCMCPU_IS_6358() */
+ mask = CKCTL_6358_ALL_SAFE_EN;
+
+ reg = bcm_perf_readl(PERF_CKCTL_REG);
+ reg &= ~mask;
+ bcm_perf_writel(reg, PERF_CKCTL_REG);
+
+ /* assign command line from kernel config */
+ strcpy(arcs_cmdline, CONFIG_CMDLINE);
+
+ /* register gpiochip */
+ bcm63xx_gpio_init();
+
+ /* do low level board init */
+ board_prom_init();
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
diff --git a/arch/mips/bcm63xx/setup.c b/arch/mips/bcm63xx/setup.c
new file mode 100644
index 0000000..b18a0ca
--- /dev/null
+++ b/arch/mips/bcm63xx/setup.c
@@ -0,0 +1,125 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/bootmem.h>
+#include <linux/ioport.h>
+#include <linux/pm.h>
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+#include <asm/reboot.h>
+#include <asm/cacheflush.h>
+#include <bcm63xx_board.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_io.h>
+
+void bcm63xx_machine_halt(void)
+{
+ printk(KERN_INFO "System halted\n");
+ while (1)
+ ;
+}
+
+static void bcm6348_a1_reboot(void)
+{
+ u32 reg;
+
+ /* soft reset all blocks */
+ printk(KERN_INFO "soft-reseting all blocks ...\n");
+ reg = bcm_perf_readl(PERF_SOFTRESET_REG);
+ reg &= ~SOFTRESET_6348_ALL;
+ bcm_perf_writel(reg, PERF_SOFTRESET_REG);
+ mdelay(10);
+
+ reg = bcm_perf_readl(PERF_SOFTRESET_REG);
+ reg |= SOFTRESET_6348_ALL;
+ bcm_perf_writel(reg, PERF_SOFTRESET_REG);
+ mdelay(10);
+
+ /* Jump to the power on address. */
+ printk(KERN_INFO "jumping to reset vector.\n");
+ /* set high vectors (base at 0xbfc00000 */
+ set_c0_status(ST0_BEV | ST0_ERL);
+ /* run uncached in kseg0 */
+ change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
+ __flush_cache_all();
+ /* remove all wired TLB entries */
+ write_c0_wired(0);
+ __asm__ __volatile__(
+ "jr\t%0"
+ :
+ : "r" (0xbfc00000));
+ while (1)
+ ;
+}
+
+void bcm63xx_machine_reboot(void)
+{
+ u32 reg;
+
+ /* mask and clear all external irq */
+ reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG);
+ reg &= ~EXTIRQ_CFG_MASK_ALL;
+ reg |= EXTIRQ_CFG_CLEAR_ALL;
+ bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG);
+
+ if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() == 0xa1))
+ bcm6348_a1_reboot();
+
+ printk(KERN_INFO "triggering watchdog soft-reset...\n");
+ bcm_perf_writel(SYS_PLL_SOFT_RESET, PERF_SYS_PLL_CTL_REG);
+ while (1)
+ ;
+}
+
+static void __bcm63xx_machine_reboot(char *p)
+{
+ bcm63xx_machine_reboot();
+}
+
+/*
+ * return system type in /proc/cpuinfo
+ */
+const char *get_system_type(void)
+{
+ static char buf[128];
+ snprintf(buf, sizeof(buf), "bcm63xx/%s (0x%04x/0x%04X)",
+ board_get_name(),
+ bcm63xx_get_cpu_id(), bcm63xx_get_cpu_rev());
+ return buf;
+}
+
+void __init plat_time_init(void)
+{
+ mips_hpt_frequency = bcm63xx_get_cpu_freq() / 2;
+}
+
+void __init plat_mem_setup(void)
+{
+ add_memory_region(0, bcm63xx_get_memory_size(), BOOT_MEM_RAM);
+
+ _machine_halt = bcm63xx_machine_halt;
+ _machine_restart = __bcm63xx_machine_reboot;
+ pm_power_off = bcm63xx_machine_halt;
+
+ set_io_port_base(0);
+ ioport_resource.start = 0;
+ ioport_resource.end = ~0;
+
+ board_setup();
+}
+
+int __init bcm63xx_register_devices(void)
+{
+ return board_register_devices();
+}
+
+arch_initcall(bcm63xx_register_devices);
diff --git a/arch/mips/bcm63xx/timer.c b/arch/mips/bcm63xx/timer.c
new file mode 100644
index 0000000..ba522bd
--- /dev/null
+++ b/arch/mips/bcm63xx/timer.c
@@ -0,0 +1,205 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_timer.h>
+#include <bcm63xx_regs.h>
+
+static DEFINE_SPINLOCK(timer_reg_lock);
+static DEFINE_SPINLOCK(timer_data_lock);
+static struct clk *periph_clk;
+
+static struct timer_data {
+ void (*cb)(void *);
+ void *data;
+} timer_data[BCM63XX_TIMER_COUNT];
+
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+ u32 stat;
+ int i;
+
+ spin_lock(&timer_reg_lock);
+ stat = bcm_timer_readl(TIMER_IRQSTAT_REG);
+ bcm_timer_writel(stat, TIMER_IRQSTAT_REG);
+ spin_unlock(&timer_reg_lock);
+
+ for (i = 0; i < BCM63XX_TIMER_COUNT; i++) {
+ if (!(stat & TIMER_IRQSTAT_TIMER_CAUSE(i)))
+ continue;
+
+ spin_lock(&timer_data_lock);
+ if (!timer_data[i].cb) {
+ spin_unlock(&timer_data_lock);
+ continue;
+ }
+
+ timer_data[i].cb(timer_data[i].data);
+ spin_unlock(&timer_data_lock);
+ }
+
+ return IRQ_HANDLED;
+}
+
+int bcm63xx_timer_enable(int id)
+{
+ u32 reg;
+ unsigned long flags;
+
+ if (id >= BCM63XX_TIMER_COUNT)
+ return -EINVAL;
+
+ spin_lock_irqsave(&timer_reg_lock, flags);
+
+ reg = bcm_timer_readl(TIMER_CTLx_REG(id));
+ reg |= TIMER_CTL_ENABLE_MASK;
+ bcm_timer_writel(reg, TIMER_CTLx_REG(id));
+
+ reg = bcm_timer_readl(TIMER_IRQSTAT_REG);
+ reg |= TIMER_IRQSTAT_TIMER_IR_EN(id);
+ bcm_timer_writel(reg, TIMER_IRQSTAT_REG);
+
+ spin_unlock_irqrestore(&timer_reg_lock, flags);
+ return 0;
+}
+
+EXPORT_SYMBOL(bcm63xx_timer_enable);
+
+int bcm63xx_timer_disable(int id)
+{
+ u32 reg;
+ unsigned long flags;
+
+ if (id >= BCM63XX_TIMER_COUNT)
+ return -EINVAL;
+
+ spin_lock_irqsave(&timer_reg_lock, flags);
+
+ reg = bcm_timer_readl(TIMER_CTLx_REG(id));
+ reg &= ~TIMER_CTL_ENABLE_MASK;
+ bcm_timer_writel(reg, TIMER_CTLx_REG(id));
+
+ reg = bcm_timer_readl(TIMER_IRQSTAT_REG);
+ reg &= ~TIMER_IRQSTAT_TIMER_IR_EN(id);
+ bcm_timer_writel(reg, TIMER_IRQSTAT_REG);
+
+ spin_unlock_irqrestore(&timer_reg_lock, flags);
+ return 0;
+}
+
+EXPORT_SYMBOL(bcm63xx_timer_disable);
+
+int bcm63xx_timer_register(int id, void (*callback)(void *data), void *data)
+{
+ unsigned long flags;
+ int ret;
+
+ if (id >= BCM63XX_TIMER_COUNT || !callback)
+ return -EINVAL;
+
+ ret = 0;
+ spin_lock_irqsave(&timer_data_lock, flags);
+ if (timer_data[id].cb) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ timer_data[id].cb = callback;
+ timer_data[id].data = data;
+
+out:
+ spin_unlock_irqrestore(&timer_data_lock, flags);
+ return ret;
+}
+
+EXPORT_SYMBOL(bcm63xx_timer_register);
+
+void bcm63xx_timer_unregister(int id)
+{
+ unsigned long flags;
+
+ if (id >= BCM63XX_TIMER_COUNT)
+ return;
+
+ spin_lock_irqsave(&timer_data_lock, flags);
+ timer_data[id].cb = NULL;
+ spin_unlock_irqrestore(&timer_data_lock, flags);
+}
+
+EXPORT_SYMBOL(bcm63xx_timer_unregister);
+
+unsigned int bcm63xx_timer_countdown(unsigned int countdown_us)
+{
+ return (clk_get_rate(periph_clk) / (1000 * 1000)) * countdown_us;
+}
+
+EXPORT_SYMBOL(bcm63xx_timer_countdown);
+
+int bcm63xx_timer_set(int id, int monotonic, unsigned int countdown_us)
+{
+ u32 reg, countdown;
+ unsigned long flags;
+
+ if (id >= BCM63XX_TIMER_COUNT)
+ return -EINVAL;
+
+ countdown = bcm63xx_timer_countdown(countdown_us);
+ if (countdown & ~TIMER_CTL_COUNTDOWN_MASK)
+ return -EINVAL;
+
+ spin_lock_irqsave(&timer_reg_lock, flags);
+ reg = bcm_timer_readl(TIMER_CTLx_REG(id));
+
+ if (monotonic)
+ reg &= ~TIMER_CTL_MONOTONIC_MASK;
+ else
+ reg |= TIMER_CTL_MONOTONIC_MASK;
+
+ reg &= ~TIMER_CTL_COUNTDOWN_MASK;
+ reg |= countdown;
+ bcm_timer_writel(reg, TIMER_CTLx_REG(id));
+
+ spin_unlock_irqrestore(&timer_reg_lock, flags);
+ return 0;
+}
+
+EXPORT_SYMBOL(bcm63xx_timer_set);
+
+int bcm63xx_timer_init(void)
+{
+ int ret, irq;
+ u32 reg;
+
+ reg = bcm_timer_readl(TIMER_IRQSTAT_REG);
+ reg &= ~TIMER_IRQSTAT_TIMER0_IR_EN;
+ reg &= ~TIMER_IRQSTAT_TIMER1_IR_EN;
+ reg &= ~TIMER_IRQSTAT_TIMER2_IR_EN;
+ bcm_timer_writel(reg, TIMER_IRQSTAT_REG);
+
+ periph_clk = clk_get(NULL, "periph");
+ if (IS_ERR(periph_clk))
+ return -ENODEV;
+
+ irq = bcm63xx_get_irq_number(IRQ_TIMER);
+ ret = request_irq(irq, timer_interrupt, 0, "bcm63xx_timer", NULL);
+ if (ret) {
+ printk(KERN_ERR "bcm63xx_timer: failed to register irq\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+arch_initcall(bcm63xx_timer_init);
diff --git a/arch/mips/configs/bcm63xx_defconfig b/arch/mips/configs/bcm63xx_defconfig
new file mode 100644
index 0000000..ea00c18
--- /dev/null
+++ b/arch/mips/configs/bcm63xx_defconfig
@@ -0,0 +1,972 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc6
+# Sun May 31 20:17:18 2009
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
+CONFIG_BCM63XX=y
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+
+#
+# CPU support
+#
+CONFIG_BCM63XX_CPU_6348=y
+CONFIG_BCM63XX_CPU_6358=y
+CONFIG_BOARD_BCM963XX=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_CSRC_R4K=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
+CONFIG_CPU_BIG_ENDIAN=y
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+# CONFIG_CPU_LOONGSON2 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_48 is not set
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_128 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_SHMEM is not set
+# CONFIG_AIO is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_PCI_QUIRKS=y
+# CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_FREEZER is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+CONFIG_MMU=y
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+# CONFIG_YENTA is not set
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+CONFIG_PCMCIA_BCM63XX=y
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Power management options
+#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PM is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_CHAR is not set
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+CONFIG_BCM63XX_PHY=y
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
+CONFIG_BCM63XX_ENET=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_NET_PCMCIA is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_BCM63XX=y
+CONFIG_SERIAL_BCM63XX_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=y
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+# CONFIG_SSB_B43_PCI_BRIDGE is not set
+CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+# CONFIG_SSB_PCMCIAHOST is not set
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+# CONFIG_SSB_DRIVER_PCICORE is not set
+# CONFIG_SSB_DRIVER_MIPS is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_SSB is not set
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_CMDLINE="console=ttyS0,115200"
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/mips/include/asm/fixmap.h b/arch/mips/include/asm/fixmap.h
index 0f5caa1..efeddc8 100644
--- a/arch/mips/include/asm/fixmap.h
+++ b/arch/mips/include/asm/fixmap.h
@@ -67,11 +67,15 @@
* the start of the fixmap, and leave one page empty
* at the top of mem..
*/
+#ifdef CONFIG_BCM63XX
+#define FIXADDR_TOP ((unsigned long)(long)(int)0xff000000)
+#else
#if defined(CONFIG_CPU_TX39XX) || defined(CONFIG_CPU_TX49XX)
#define FIXADDR_TOP ((unsigned long)(long)(int)(0xff000000 - 0x20000))
#else
#define FIXADDR_TOP ((unsigned long)(long)(int)0xfffe0000)
#endif
+#endif
#define FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT)
#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE)
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h
new file mode 100644
index 0000000..fa3e7e6
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h
@@ -0,0 +1,12 @@
+#ifndef BCM63XX_BOARD_H_
+#define BCM63XX_BOARD_H_
+
+const char *board_get_name(void);
+
+void board_prom_init(void);
+
+void board_setup(void);
+
+int board_register_devices(void);
+
+#endif /* ! BCM63XX_BOARD_H_ */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_clk.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_clk.h
new file mode 100644
index 0000000..8fcf8df
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_clk.h
@@ -0,0 +1,11 @@
+#ifndef BCM63XX_CLK_H_
+#define BCM63XX_CLK_H_
+
+struct clk {
+ void (*set)(struct clk *, int);
+ unsigned int rate;
+ unsigned int usage;
+ int id;
+};
+
+#endif /* ! BCM63XX_CLK_H_ */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
new file mode 100644
index 0000000..b12c4ac
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
@@ -0,0 +1,538 @@
+#ifndef BCM63XX_CPU_H_
+#define BCM63XX_CPU_H_
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+/*
+ * Macro to fetch bcm63xx cpu id and revision, should be optimized at
+ * compile time if only one CPU support is enabled (idea stolen from
+ * arm mach-types)
+ */
+#define BCM6338_CPU_ID 0x6338
+#define BCM6345_CPU_ID 0x6345
+#define BCM6348_CPU_ID 0x6348
+#define BCM6358_CPU_ID 0x6358
+
+void __init bcm63xx_cpu_init(void);
+u16 __bcm63xx_get_cpu_id(void);
+u16 bcm63xx_get_cpu_rev(void);
+unsigned int bcm63xx_get_cpu_freq(void);
+
+#ifdef CONFIG_BCM63XX_CPU_6338
+# ifdef bcm63xx_get_cpu_id
+# undef bcm63xx_get_cpu_id
+# define bcm63xx_get_cpu_id() __bcm63xx_get_cpu_id()
+# define BCMCPU_RUNTIME_DETECT
+# else
+# define bcm63xx_get_cpu_id() BCM6338_CPU_ID
+# endif
+# define BCMCPU_IS_6338() (bcm63xx_get_cpu_id() == BCM6338_CPU_ID)
+#else
+# define BCMCPU_IS_6338() (0)
+#endif
+
+#ifdef CONFIG_BCM63XX_CPU_6345
+# ifdef bcm63xx_get_cpu_id
+# undef bcm63xx_get_cpu_id
+# define bcm63xx_get_cpu_id() __bcm63xx_get_cpu_id()
+# define BCMCPU_RUNTIME_DETECT
+# else
+# define bcm63xx_get_cpu_id() BCM6345_CPU_ID
+# endif
+# define BCMCPU_IS_6345() (bcm63xx_get_cpu_id() == BCM6345_CPU_ID)
+#else
+# define BCMCPU_IS_6345() (0)
+#endif
+
+#ifdef CONFIG_BCM63XX_CPU_6348
+# ifdef bcm63xx_get_cpu_id
+# undef bcm63xx_get_cpu_id
+# define bcm63xx_get_cpu_id() __bcm63xx_get_cpu_id()
+# define BCMCPU_RUNTIME_DETECT
+# else
+# define bcm63xx_get_cpu_id() BCM6348_CPU_ID
+# endif
+# define BCMCPU_IS_6348() (bcm63xx_get_cpu_id() == BCM6348_CPU_ID)
+#else
+# define BCMCPU_IS_6348() (0)
+#endif
+
+#ifdef CONFIG_BCM63XX_CPU_6358
+# ifdef bcm63xx_get_cpu_id
+# undef bcm63xx_get_cpu_id
+# define bcm63xx_get_cpu_id() __bcm63xx_get_cpu_id()
+# define BCMCPU_RUNTIME_DETECT
+# else
+# define bcm63xx_get_cpu_id() BCM6358_CPU_ID
+# endif
+# define BCMCPU_IS_6358() (bcm63xx_get_cpu_id() == BCM6358_CPU_ID)
+#else
+# define BCMCPU_IS_6358() (0)
+#endif
+
+#ifndef bcm63xx_get_cpu_id
+#error "No CPU support configured"
+#endif
+
+/*
+ * While registers sets are (mostly) the same across 63xx CPU, base
+ * address of these sets do change.
+ */
+enum bcm63xx_regs_set {
+ RSET_DSL_LMEM = 0,
+ RSET_PERF,
+ RSET_TIMER,
+ RSET_WDT,
+ RSET_UART0,
+ RSET_GPIO,
+ RSET_SPI,
+ RSET_UDC0,
+ RSET_OHCI0,
+ RSET_OHCI_PRIV,
+ RSET_USBH_PRIV,
+ RSET_MPI,
+ RSET_PCMCIA,
+ RSET_DSL,
+ RSET_ENET0,
+ RSET_ENET1,
+ RSET_ENETDMA,
+ RSET_EHCI0,
+ RSET_SDRAM,
+ RSET_MEMC,
+ RSET_DDR,
+};
+
+#define RSET_DSL_LMEM_SIZE (64 * 1024 * 4)
+#define RSET_DSL_SIZE 4096
+#define RSET_WDT_SIZE 12
+#define RSET_ENET_SIZE 2048
+#define RSET_ENETDMA_SIZE 2048
+#define RSET_UART_SIZE 24
+#define RSET_UDC_SIZE 256
+#define RSET_OHCI_SIZE 256
+#define RSET_EHCI_SIZE 256
+#define RSET_PCMCIA_SIZE 12
+
+/*
+ * 6338 register sets base address
+ */
+#define BCM_6338_DSL_LMEM_BASE (0xfff00000)
+#define BCM_6338_PERF_BASE (0xfffe0000)
+#define BCM_6338_BB_BASE (0xfffe0100)
+#define BCM_6338_TIMER_BASE (0xfffe0200)
+#define BCM_6338_WDT_BASE (0xfffe021c)
+#define BCM_6338_UART0_BASE (0xfffe0300)
+#define BCM_6338_GPIO_BASE (0xfffe0400)
+#define BCM_6338_SPI_BASE (0xfffe0c00)
+#define BCM_6338_UDC0_BASE (0xdeadbeef)
+#define BCM_6338_USBDMA_BASE (0xfffe2400)
+#define BCM_6338_OHCI0_BASE (0xdeadbeef)
+#define BCM_6338_OHCI_PRIV_BASE (0xfffe3000)
+#define BCM_6338_USBH_PRIV_BASE (0xdeadbeef)
+#define BCM_6338_MPI_BASE (0xfffe3160)
+#define BCM_6338_PCMCIA_BASE (0xdeadbeef)
+#define BCM_6338_SDRAM_REGS_BASE (0xfffe3100)
+#define BCM_6338_DSL_BASE (0xfffe1000)
+#define BCM_6338_SAR_BASE (0xfffe2000)
+#define BCM_6338_UBUS_BASE (0xdeadbeef)
+#define BCM_6338_ENET0_BASE (0xfffe2800)
+#define BCM_6338_ENET1_BASE (0xdeadbeef)
+#define BCM_6338_ENETDMA_BASE (0xfffe2400)
+#define BCM_6338_EHCI0_BASE (0xdeadbeef)
+#define BCM_6338_SDRAM_BASE (0xfffe3100)
+#define BCM_6338_MEMC_BASE (0xdeadbeef)
+#define BCM_6338_DDR_BASE (0xdeadbeef)
+
+/*
+ * 6345 register sets base address
+ */
+#define BCM_6345_DSL_LMEM_BASE (0xfff00000)
+#define BCM_6345_PERF_BASE (0xfffe0000)
+#define BCM_6345_BB_BASE (0xfffe0100)
+#define BCM_6345_TIMER_BASE (0xfffe0200)
+#define BCM_6345_WDT_BASE (0xfffe021c)
+#define BCM_6345_UART0_BASE (0xfffe0300)
+#define BCM_6345_GPIO_BASE (0xfffe0400)
+#define BCM_6345_SPI_BASE (0xdeadbeef)
+#define BCM_6345_UDC0_BASE (0xdeadbeef)
+#define BCM_6345_USBDMA_BASE (0xfffe2800)
+#define BCM_6345_ENET0_BASE (0xfffe1800)
+#define BCM_6345_ENETDMA_BASE (0xfffe2800)
+#define BCM_6345_PCMCIA_BASE (0xfffe2028)
+#define BCM_6345_MPI_BASE (0xdeadbeef)
+#define BCM_6345_OHCI0_BASE (0xfffe2100)
+#define BCM_6345_OHCI_PRIV_BASE (0xfffe2200)
+#define BCM_6345_USBH_PRIV_BASE (0xdeadbeef)
+#define BCM_6345_SDRAM_REGS_BASE (0xfffe2300)
+#define BCM_6345_DSL_BASE (0xdeadbeef)
+#define BCM_6345_SAR_BASE (0xdeadbeef)
+#define BCM_6345_UBUS_BASE (0xdeadbeef)
+#define BCM_6345_ENET1_BASE (0xdeadbeef)
+#define BCM_6345_EHCI0_BASE (0xdeadbeef)
+#define BCM_6345_SDRAM_BASE (0xfffe2300)
+#define BCM_6345_MEMC_BASE (0xdeadbeef)
+#define BCM_6345_DDR_BASE (0xdeadbeef)
+
+/*
+ * 6348 register sets base address
+ */
+#define BCM_6348_DSL_LMEM_BASE (0xfff00000)
+#define BCM_6348_PERF_BASE (0xfffe0000)
+#define BCM_6348_TIMER_BASE (0xfffe0200)
+#define BCM_6348_WDT_BASE (0xfffe021c)
+#define BCM_6348_UART0_BASE (0xfffe0300)
+#define BCM_6348_GPIO_BASE (0xfffe0400)
+#define BCM_6348_SPI_BASE (0xfffe0c00)
+#define BCM_6348_UDC0_BASE (0xfffe1000)
+#define BCM_6348_OHCI0_BASE (0xfffe1b00)
+#define BCM_6348_OHCI_PRIV_BASE (0xfffe1c00)
+#define BCM_6348_USBH_PRIV_BASE (0xdeadbeef)
+#define BCM_6348_MPI_BASE (0xfffe2000)
+#define BCM_6348_PCMCIA_BASE (0xfffe2054)
+#define BCM_6348_SDRAM_REGS_BASE (0xfffe2300)
+#define BCM_6348_DSL_BASE (0xfffe3000)
+#define BCM_6348_ENET0_BASE (0xfffe6000)
+#define BCM_6348_ENET1_BASE (0xfffe6800)
+#define BCM_6348_ENETDMA_BASE (0xfffe7000)
+#define BCM_6348_EHCI0_BASE (0xdeadbeef)
+#define BCM_6348_SDRAM_BASE (0xfffe2300)
+#define BCM_6348_MEMC_BASE (0xdeadbeef)
+#define BCM_6348_DDR_BASE (0xdeadbeef)
+
+/*
+ * 6358 register sets base address
+ */
+#define BCM_6358_DSL_LMEM_BASE (0xfff00000)
+#define BCM_6358_PERF_BASE (0xfffe0000)
+#define BCM_6358_TIMER_BASE (0xfffe0040)
+#define BCM_6358_WDT_BASE (0xfffe005c)
+#define BCM_6358_UART0_BASE (0xfffe0100)
+#define BCM_6358_GPIO_BASE (0xfffe0080)
+#define BCM_6358_SPI_BASE (0xdeadbeef)
+#define BCM_6358_UDC0_BASE (0xfffe0800)
+#define BCM_6358_OHCI0_BASE (0xfffe1400)
+#define BCM_6358_OHCI_PRIV_BASE (0xdeadbeef)
+#define BCM_6358_USBH_PRIV_BASE (0xfffe1500)
+#define BCM_6358_MPI_BASE (0xfffe1000)
+#define BCM_6358_PCMCIA_BASE (0xfffe1054)
+#define BCM_6358_SDRAM_REGS_BASE (0xfffe2300)
+#define BCM_6358_DSL_BASE (0xfffe3000)
+#define BCM_6358_ENET0_BASE (0xfffe4000)
+#define BCM_6358_ENET1_BASE (0xfffe4800)
+#define BCM_6358_ENETDMA_BASE (0xfffe5000)
+#define BCM_6358_EHCI0_BASE (0xfffe1300)
+#define BCM_6358_SDRAM_BASE (0xdeadbeef)
+#define BCM_6358_MEMC_BASE (0xfffe1200)
+#define BCM_6358_DDR_BASE (0xfffe12a0)
+
+
+extern const unsigned long *bcm63xx_regs_base;
+
+static inline unsigned long bcm63xx_regset_address(enum bcm63xx_regs_set set)
+{
+#ifdef BCMCPU_RUNTIME_DETECT
+ return bcm63xx_regs_base[set];
+#else
+#ifdef CONFIG_BCM63XX_CPU_6338
+ switch (set) {
+ case RSET_DSL_LMEM:
+ return BCM_6338_DSL_LMEM_BASE;
+ case RSET_PERF:
+ return BCM_6338_PERF_BASE;
+ case RSET_TIMER:
+ return BCM_6338_TIMER_BASE;
+ case RSET_WDT:
+ return BCM_6338_WDT_BASE;
+ case RSET_UART0:
+ return BCM_6338_UART0_BASE;
+ case RSET_GPIO:
+ return BCM_6338_GPIO_BASE;
+ case RSET_SPI:
+ return BCM_6338_SPI_BASE;
+ case RSET_UDC0:
+ return BCM_6338_UDC0_BASE;
+ case RSET_OHCI0:
+ return BCM_6338_OHCI0_BASE;
+ case RSET_OHCI_PRIV:
+ return BCM_6338_OHCI_PRIV_BASE;
+ case RSET_USBH_PRIV:
+ return BCM_6338_USBH_PRIV_BASE;
+ case RSET_MPI:
+ return BCM_6338_MPI_BASE;
+ case RSET_PCMCIA:
+ return BCM_6338_PCMCIA_BASE;
+ case RSET_DSL:
+ return BCM_6338_DSL_BASE;
+ case RSET_ENET0:
+ return BCM_6338_ENET0_BASE;
+ case RSET_ENET1:
+ return BCM_6338_ENET1_BASE;
+ case RSET_ENETDMA:
+ return BCM_6338_ENETDMA_BASE;
+ case RSET_EHCI0:
+ return BCM_6338_EHCI0_BASE;
+ case RSET_SDRAM:
+ return BCM_6338_SDRAM_BASE;
+ case RSET_MEMC:
+ return BCM_6338_MEMC_BASE;
+ case RSET_DDR:
+ return BCM_6338_DDR_BASE;
+ }
+#endif
+#ifdef CONFIG_BCM63XX_CPU_6345
+ switch (set) {
+ case RSET_DSL_LMEM:
+ return BCM_6345_DSL_LMEM_BASE;
+ case RSET_PERF:
+ return BCM_6345_PERF_BASE;
+ case RSET_TIMER:
+ return BCM_6345_TIMER_BASE;
+ case RSET_WDT:
+ return BCM_6345_WDT_BASE;
+ case RSET_UART0:
+ return BCM_6345_UART0_BASE;
+ case RSET_GPIO:
+ return BCM_6345_GPIO_BASE;
+ case RSET_SPI:
+ return BCM_6345_SPI_BASE;
+ case RSET_UDC0:
+ return BCM_6345_UDC0_BASE;
+ case RSET_OHCI0:
+ return BCM_6345_OHCI0_BASE;
+ case RSET_OHCI_PRIV:
+ return BCM_6345_OHCI_PRIV_BASE;
+ case RSET_USBH_PRIV:
+ return BCM_6345_USBH_PRIV_BASE;
+ case RSET_MPI:
+ return BCM_6345_MPI_BASE;
+ case RSET_PCMCIA:
+ return BCM_6345_PCMCIA_BASE;
+ case RSET_DSL:
+ return BCM_6345_DSL_BASE;
+ case RSET_ENET0:
+ return BCM_6345_ENET0_BASE;
+ case RSET_ENET1:
+ return BCM_6345_ENET1_BASE;
+ case RSET_ENETDMA:
+ return BCM_6345_ENETDMA_BASE;
+ case RSET_EHCI0:
+ return BCM_6345_EHCI0_BASE;
+ case RSET_SDRAM:
+ return BCM_6345_SDRAM_BASE;
+ case RSET_MEMC:
+ return BCM_6345_MEMC_BASE;
+ case RSET_DDR:
+ return BCM_6345_DDR_BASE;
+ }
+#endif
+#ifdef CONFIG_BCM63XX_CPU_6348
+ switch (set) {
+ case RSET_DSL_LMEM:
+ return BCM_6348_DSL_LMEM_BASE;
+ case RSET_PERF:
+ return BCM_6348_PERF_BASE;
+ case RSET_TIMER:
+ return BCM_6348_TIMER_BASE;
+ case RSET_WDT:
+ return BCM_6348_WDT_BASE;
+ case RSET_UART0:
+ return BCM_6348_UART0_BASE;
+ case RSET_GPIO:
+ return BCM_6348_GPIO_BASE;
+ case RSET_SPI:
+ return BCM_6348_SPI_BASE;
+ case RSET_UDC0:
+ return BCM_6348_UDC0_BASE;
+ case RSET_OHCI0:
+ return BCM_6348_OHCI0_BASE;
+ case RSET_OHCI_PRIV:
+ return BCM_6348_OHCI_PRIV_BASE;
+ case RSET_USBH_PRIV:
+ return BCM_6348_USBH_PRIV_BASE;
+ case RSET_MPI:
+ return BCM_6348_MPI_BASE;
+ case RSET_PCMCIA:
+ return BCM_6348_PCMCIA_BASE;
+ case RSET_DSL:
+ return BCM_6348_DSL_BASE;
+ case RSET_ENET0:
+ return BCM_6348_ENET0_BASE;
+ case RSET_ENET1:
+ return BCM_6348_ENET1_BASE;
+ case RSET_ENETDMA:
+ return BCM_6348_ENETDMA_BASE;
+ case RSET_EHCI0:
+ return BCM_6348_EHCI0_BASE;
+ case RSET_SDRAM:
+ return BCM_6348_SDRAM_BASE;
+ case RSET_MEMC:
+ return BCM_6348_MEMC_BASE;
+ case RSET_DDR:
+ return BCM_6348_DDR_BASE;
+ }
+#endif
+#ifdef CONFIG_BCM63XX_CPU_6358
+ switch (set) {
+ case RSET_DSL_LMEM:
+ return BCM_6358_DSL_LMEM_BASE;
+ case RSET_PERF:
+ return BCM_6358_PERF_BASE;
+ case RSET_TIMER:
+ return BCM_6358_TIMER_BASE;
+ case RSET_WDT:
+ return BCM_6358_WDT_BASE;
+ case RSET_UART0:
+ return BCM_6358_UART0_BASE;
+ case RSET_GPIO:
+ return BCM_6358_GPIO_BASE;
+ case RSET_SPI:
+ return BCM_6358_SPI_BASE;
+ case RSET_UDC0:
+ return BCM_6358_UDC0_BASE;
+ case RSET_OHCI0:
+ return BCM_6358_OHCI0_BASE;
+ case RSET_OHCI_PRIV:
+ return BCM_6358_OHCI_PRIV_BASE;
+ case RSET_USBH_PRIV:
+ return BCM_6358_USBH_PRIV_BASE;
+ case RSET_MPI:
+ return BCM_6358_MPI_BASE;
+ case RSET_PCMCIA:
+ return BCM_6358_PCMCIA_BASE;
+ case RSET_ENET0:
+ return BCM_6358_ENET0_BASE;
+ case RSET_ENET1:
+ return BCM_6358_ENET1_BASE;
+ case RSET_ENETDMA:
+ return BCM_6358_ENETDMA_BASE;
+ case RSET_DSL:
+ return BCM_6358_DSL_BASE;
+ case RSET_EHCI0:
+ return BCM_6358_EHCI0_BASE;
+ case RSET_SDRAM:
+ return BCM_6358_SDRAM_BASE;
+ case RSET_MEMC:
+ return BCM_6358_MEMC_BASE;
+ case RSET_DDR:
+ return BCM_6358_DDR_BASE;
+ }
+#endif
+#endif
+ /* unreached */
+ return 0;
+}
+
+/*
+ * IRQ number changes across CPU too
+ */
+enum bcm63xx_irq {
+ IRQ_TIMER = 0,
+ IRQ_UART0,
+ IRQ_DSL,
+ IRQ_ENET0,
+ IRQ_ENET1,
+ IRQ_ENET_PHY,
+ IRQ_OHCI0,
+ IRQ_EHCI0,
+ IRQ_PCMCIA0,
+ IRQ_ENET0_RXDMA,
+ IRQ_ENET0_TXDMA,
+ IRQ_ENET1_RXDMA,
+ IRQ_ENET1_TXDMA,
+ IRQ_PCI,
+ IRQ_PCMCIA,
+};
+
+/*
+ * 6338 irqs
+ */
+#define BCM_6338_TIMER_IRQ (IRQ_INTERNAL_BASE + 0)
+#define BCM_6338_SPI_IRQ (IRQ_INTERNAL_BASE + 1)
+#define BCM_6338_UART0_IRQ (IRQ_INTERNAL_BASE + 2)
+#define BCM_6338_DG_IRQ (IRQ_INTERNAL_BASE + 4)
+#define BCM_6338_DSL_IRQ (IRQ_INTERNAL_BASE + 5)
+#define BCM_6338_ATM_IRQ (IRQ_INTERNAL_BASE + 6)
+#define BCM_6338_UDC0_IRQ (IRQ_INTERNAL_BASE + 7)
+#define BCM_6338_ENET0_IRQ (IRQ_INTERNAL_BASE + 8)
+#define BCM_6338_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 9)
+#define BCM_6338_SDRAM_IRQ (IRQ_INTERNAL_BASE + 10)
+#define BCM_6338_USB_CNTL_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 11)
+#define BCM_6338_USB_CNTL_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 12)
+#define BCM_6338_USB_BULK_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 13)
+#define BCM_6338_USB_BULK_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 14)
+#define BCM_6338_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 15)
+#define BCM_6338_ENET0_TXDMA_IRQ (IRQ_INTERNAL_BASE + 16)
+#define BCM_6338_SDIO_IRQ (IRQ_INTERNAL_BASE + 17)
+
+/*
+ * 6345 irqs
+ */
+#define BCM_6345_TIMER_IRQ (IRQ_INTERNAL_BASE + 0)
+#define BCM_6345_UART0_IRQ (IRQ_INTERNAL_BASE + 2)
+#define BCM_6345_DSL_IRQ (IRQ_INTERNAL_BASE + 3)
+#define BCM_6345_ATM_IRQ (IRQ_INTERNAL_BASE + 4)
+#define BCM_6345_USB_IRQ (IRQ_INTERNAL_BASE + 5)
+#define BCM_6345_ENET0_IRQ (IRQ_INTERNAL_BASE + 8)
+#define BCM_6345_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 12)
+#define BCM_6345_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 13 + 1)
+#define BCM_6345_ENET0_TXDMA_IRQ (IRQ_INTERNAL_BASE + 13 + 2)
+#define BCM_6345_EBI_RX_IRQ (IRQ_INTERNAL_BASE + 13 + 5)
+#define BCM_6345_EBI_TX_IRQ (IRQ_INTERNAL_BASE + 13 + 6)
+#define BCM_6345_RESERVED_RX_IRQ (IRQ_INTERNAL_BASE + 13 + 9)
+#define BCM_6345_RESERVED_TX_IRQ (IRQ_INTERNAL_BASE + 13 + 10)
+#define BCM_6345_USB_BULK_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 13 + 13)
+#define BCM_6345_USB_BULK_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 13 + 14)
+#define BCM_6345_USB_CNTL_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 13 + 15)
+#define BCM_6345_USB_CNTL_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 13 + 16)
+#define BCM_6345_USB_ISO_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 13 + 17)
+#define BCM_6345_USB_ISO_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 13 + 18)
+
+/*
+ * 6348 irqs
+ */
+#define BCM_6348_TIMER_IRQ (IRQ_INTERNAL_BASE + 0)
+#define BCM_6348_UART0_IRQ (IRQ_INTERNAL_BASE + 2)
+#define BCM_6348_DSL_IRQ (IRQ_INTERNAL_BASE + 4)
+#define BCM_6348_ENET1_IRQ (IRQ_INTERNAL_BASE + 7)
+#define BCM_6348_ENET0_IRQ (IRQ_INTERNAL_BASE + 8)
+#define BCM_6348_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 9)
+#define BCM_6348_OHCI0_IRQ (IRQ_INTERNAL_BASE + 12)
+#define BCM_6348_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 20)
+#define BCM_6348_ENET0_TXDMA_IRQ (IRQ_INTERNAL_BASE + 21)
+#define BCM_6348_ENET1_RXDMA_IRQ (IRQ_INTERNAL_BASE + 22)
+#define BCM_6348_ENET1_TXDMA_IRQ (IRQ_INTERNAL_BASE + 23)
+#define BCM_6348_PCMCIA_IRQ (IRQ_INTERNAL_BASE + 24)
+#define BCM_6348_PCI_IRQ (IRQ_INTERNAL_BASE + 24)
+
+/*
+ * 6358 irqs
+ */
+#define BCM_6358_TIMER_IRQ (IRQ_INTERNAL_BASE + 0)
+#define BCM_6358_UART0_IRQ (IRQ_INTERNAL_BASE + 2)
+#define BCM_6358_OHCI0_IRQ (IRQ_INTERNAL_BASE + 5)
+#define BCM_6358_ENET1_IRQ (IRQ_INTERNAL_BASE + 6)
+#define BCM_6358_ENET0_IRQ (IRQ_INTERNAL_BASE + 8)
+#define BCM_6358_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 9)
+#define BCM_6358_EHCI0_IRQ (IRQ_INTERNAL_BASE + 10)
+#define BCM_6358_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 15)
+#define BCM_6358_ENET0_TXDMA_IRQ (IRQ_INTERNAL_BASE + 16)
+#define BCM_6358_ENET1_RXDMA_IRQ (IRQ_INTERNAL_BASE + 17)
+#define BCM_6358_ENET1_TXDMA_IRQ (IRQ_INTERNAL_BASE + 18)
+#define BCM_6358_DSL_IRQ (IRQ_INTERNAL_BASE + 29)
+#define BCM_6358_PCI_IRQ (IRQ_INTERNAL_BASE + 31)
+#define BCM_6358_PCMCIA_IRQ (IRQ_INTERNAL_BASE + 24)
+
+extern const int *bcm63xx_irqs;
+
+static inline int bcm63xx_get_irq_number(enum bcm63xx_irq irq)
+{
+ return bcm63xx_irqs[irq];
+}
+
+/*
+ * return installed memory size
+ */
+unsigned int bcm63xx_get_memory_size(void);
+
+#endif /* !BCM63XX_CPU_H_ */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cs.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cs.h
new file mode 100644
index 0000000..b1821c8
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cs.h
@@ -0,0 +1,10 @@
+#ifndef BCM63XX_CS_H
+#define BCM63XX_CS_H
+
+int bcm63xx_set_cs_base(unsigned int cs, u32 base, unsigned int size);
+int bcm63xx_set_cs_timing(unsigned int cs, unsigned int wait,
+ unsigned int setup, unsigned int hold);
+int bcm63xx_set_cs_param(unsigned int cs, u32 flags);
+int bcm63xx_set_cs_status(unsigned int cs, int enable);
+
+#endif /* !BCM63XX_CS_H */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_dsp.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_dsp.h
new file mode 100644
index 0000000..b587d45
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_dsp.h
@@ -0,0 +1,13 @@
+#ifndef __BCM63XX_DSP_H
+#define __BCM63XX_DSP_H
+
+struct bcm63xx_dsp_platform_data {
+ unsigned gpio_rst;
+ unsigned gpio_int;
+ unsigned cs;
+ unsigned ext_irq;
+};
+
+int __init bcm63xx_dsp_register(const struct bcm63xx_dsp_platform_data *pd);
+
+#endif /* __BCM63XX_DSP_H */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
new file mode 100644
index 0000000..d53f611
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
@@ -0,0 +1,45 @@
+#ifndef BCM63XX_DEV_ENET_H_
+#define BCM63XX_DEV_ENET_H_
+
+#include <linux/if_ether.h>
+#include <linux/init.h>
+
+/*
+ * on board ethernet platform data
+ */
+struct bcm63xx_enet_platform_data {
+ char mac_addr[ETH_ALEN];
+
+ int has_phy;
+
+ /* if has_phy, then set use_internal_phy */
+ int use_internal_phy;
+
+ /* or fill phy info to use an external one */
+ int phy_id;
+ int has_phy_interrupt;
+ int phy_interrupt;
+
+ /* if has_phy, use autonegociated pause parameters or force
+ * them */
+ int pause_auto;
+ int pause_rx;
+ int pause_tx;
+
+ /* if !has_phy, set desired forced speed/duplex */
+ int force_speed_100;
+ int force_duplex_full;
+
+ /* if !has_phy, set callback to perform mii device
+ * init/remove */
+ int (*mii_config)(struct net_device *dev, int probe,
+ int (*mii_read)(struct net_device *dev,
+ int phy_id, int reg),
+ void (*mii_write)(struct net_device *dev,
+ int phy_id, int reg, int val));
+};
+
+int __init bcm63xx_enet_register(int unit,
+ const struct bcm63xx_enet_platform_data *pd);
+
+#endif /* ! BCM63XX_DEV_ENET_H_ */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pci.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pci.h
new file mode 100644
index 0000000..c549344
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pci.h
@@ -0,0 +1,6 @@
+#ifndef BCM63XX_DEV_PCI_H_
+#define BCM63XX_DEV_PCI_H_
+
+extern int bcm63xx_pci_enabled;
+
+#endif /* BCM63XX_DEV_PCI_H_ */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
new file mode 100644
index 0000000..76a0b72
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
@@ -0,0 +1,22 @@
+#ifndef BCM63XX_GPIO_H
+#define BCM63XX_GPIO_H
+
+#include <linux/init.h>
+
+int __init bcm63xx_gpio_init(void);
+
+static inline unsigned long bcm63xx_gpio_count(void)
+{
+ switch (bcm63xx_get_cpu_id()) {
+ case BCM6358_CPU_ID:
+ return 40;
+ case BCM6348_CPU_ID:
+ default:
+ return 37;
+ }
+}
+
+#define GPIO_DIR_OUT 0x0
+#define GPIO_DIR_IN 0x1
+
+#endif /* !BCM63XX_GPIO_H */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
new file mode 100644
index 0000000..91180fa
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
@@ -0,0 +1,93 @@
+#ifndef BCM63XX_IO_H_
+#define BCM63XX_IO_H_
+
+#include "bcm63xx_cpu.h"
+
+/*
+ * Physical memory map, RAM is mapped at 0x0.
+ *
+ * Note that size MUST be a power of two.
+ */
+#define BCM_PCMCIA_COMMON_BASE_PA (0x20000000)
+#define BCM_PCMCIA_COMMON_SIZE (16 * 1024 * 1024)
+#define BCM_PCMCIA_COMMON_END_PA (BCM_PCMCIA_COMMON_BASE_PA + \
+ BCM_PCMCIA_COMMON_SIZE - 1)
+
+#define BCM_PCMCIA_ATTR_BASE_PA (0x21000000)
+#define BCM_PCMCIA_ATTR_SIZE (16 * 1024 * 1024)
+#define BCM_PCMCIA_ATTR_END_PA (BCM_PCMCIA_ATTR_BASE_PA + \
+ BCM_PCMCIA_ATTR_SIZE - 1)
+
+#define BCM_PCMCIA_IO_BASE_PA (0x22000000)
+#define BCM_PCMCIA_IO_SIZE (64 * 1024)
+#define BCM_PCMCIA_IO_END_PA (BCM_PCMCIA_IO_BASE_PA + \
+ BCM_PCMCIA_IO_SIZE - 1)
+
+#define BCM_PCI_MEM_BASE_PA (0x30000000)
+#define BCM_PCI_MEM_SIZE (128 * 1024 * 1024)
+#define BCM_PCI_MEM_END_PA (BCM_PCI_MEM_BASE_PA + \
+ BCM_PCI_MEM_SIZE - 1)
+
+#define BCM_PCI_IO_BASE_PA (0x08000000)
+#define BCM_PCI_IO_SIZE (64 * 1024)
+#define BCM_PCI_IO_END_PA (BCM_PCI_IO_BASE_PA + \
+ BCM_PCI_IO_SIZE - 1)
+#define BCM_PCI_IO_HALF_PA (BCM_PCI_IO_BASE_PA + \
+ (BCM_PCI_IO_SIZE / 2) - 1)
+
+#define BCM_CB_MEM_BASE_PA (0x38000000)
+#define BCM_CB_MEM_SIZE (128 * 1024 * 1024)
+#define BCM_CB_MEM_END_PA (BCM_CB_MEM_BASE_PA + \
+ BCM_CB_MEM_SIZE - 1)
+
+
+/*
+ * Internal registers are accessed through KSEG3
+ */
+#define BCM_REGS_VA(x) ((void __iomem *)(x))
+
+#define bcm_readb(a) (*(volatile unsigned char *) BCM_REGS_VA(a))
+#define bcm_readw(a) (*(volatile unsigned short *) BCM_REGS_VA(a))
+#define bcm_readl(a) (*(volatile unsigned int *) BCM_REGS_VA(a))
+#define bcm_writeb(v, a) (*(volatile unsigned char *) BCM_REGS_VA((a)) = (v))
+#define bcm_writew(v, a) (*(volatile unsigned short *) BCM_REGS_VA((a)) = (v))
+#define bcm_writel(v, a) (*(volatile unsigned int *) BCM_REGS_VA((a)) = (v))
+
+/*
+ * IO helpers to access register set for current CPU
+ */
+#define bcm_rset_readb(s, o) bcm_readb(bcm63xx_regset_address(s) + (o))
+#define bcm_rset_readw(s, o) bcm_readw(bcm63xx_regset_address(s) + (o))
+#define bcm_rset_readl(s, o) bcm_readl(bcm63xx_regset_address(s) + (o))
+#define bcm_rset_writeb(s, v, o) bcm_writeb((v), \
+ bcm63xx_regset_address(s) + (o))
+#define bcm_rset_writew(s, v, o) bcm_writew((v), \
+ bcm63xx_regset_address(s) + (o))
+#define bcm_rset_writel(s, v, o) bcm_writel((v), \
+ bcm63xx_regset_address(s) + (o))
+
+/*
+ * helpers for frequently used register sets
+ */
+#define bcm_perf_readl(o) bcm_rset_readl(RSET_PERF, (o))
+#define bcm_perf_writel(v, o) bcm_rset_writel(RSET_PERF, (v), (o))
+#define bcm_timer_readl(o) bcm_rset_readl(RSET_TIMER, (o))
+#define bcm_timer_writel(v, o) bcm_rset_writel(RSET_TIMER, (v), (o))
+#define bcm_wdt_readl(o) bcm_rset_readl(RSET_WDT, (o))
+#define bcm_wdt_writel(v, o) bcm_rset_writel(RSET_WDT, (v), (o))
+#define bcm_gpio_readl(o) bcm_rset_readl(RSET_GPIO, (o))
+#define bcm_gpio_writel(v, o) bcm_rset_writel(RSET_GPIO, (v), (o))
+#define bcm_uart0_readl(o) bcm_rset_readl(RSET_UART0, (o))
+#define bcm_uart0_writel(v, o) bcm_rset_writel(RSET_UART0, (v), (o))
+#define bcm_mpi_readl(o) bcm_rset_readl(RSET_MPI, (o))
+#define bcm_mpi_writel(v, o) bcm_rset_writel(RSET_MPI, (v), (o))
+#define bcm_pcmcia_readl(o) bcm_rset_readl(RSET_PCMCIA, (o))
+#define bcm_pcmcia_writel(v, o) bcm_rset_writel(RSET_PCMCIA, (v), (o))
+#define bcm_sdram_readl(o) bcm_rset_readl(RSET_SDRAM, (o))
+#define bcm_sdram_writel(v, o) bcm_rset_writel(RSET_SDRAM, (v), (o))
+#define bcm_memc_readl(o) bcm_rset_readl(RSET_MEMC, (o))
+#define bcm_memc_writel(v, o) bcm_rset_writel(RSET_MEMC, (v), (o))
+#define bcm_ddr_readl(o) bcm_rset_readl(RSET_DDR, (o))
+#define bcm_ddr_writel(v, o) bcm_rset_writel(RSET_DDR, (v), (o))
+
+#endif /* ! BCM63XX_IO_H_ */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h
new file mode 100644
index 0000000..5f95577
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h
@@ -0,0 +1,15 @@
+#ifndef BCM63XX_IRQ_H_
+#define BCM63XX_IRQ_H_
+
+#include <bcm63xx_cpu.h>
+
+#define IRQ_MIPS_BASE 0
+#define IRQ_INTERNAL_BASE 8
+
+#define IRQ_EXT_BASE (IRQ_MIPS_BASE + 3)
+#define IRQ_EXT_0 (IRQ_EXT_BASE + 0)
+#define IRQ_EXT_1 (IRQ_EXT_BASE + 1)
+#define IRQ_EXT_2 (IRQ_EXT_BASE + 2)
+#define IRQ_EXT_3 (IRQ_EXT_BASE + 3)
+
+#endif /* ! BCM63XX_IRQ_H_ */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
new file mode 100644
index 0000000..ed4ccec
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
@@ -0,0 +1,773 @@
+#ifndef BCM63XX_REGS_H_
+#define BCM63XX_REGS_H_
+
+/*************************************************************************
+ * _REG relative to RSET_PERF
+ *************************************************************************/
+
+/* Chip Identifier / Revision register */
+#define PERF_REV_REG 0x0
+#define REV_CHIPID_SHIFT 16
+#define REV_CHIPID_MASK (0xffff << REV_CHIPID_SHIFT)
+#define REV_REVID_SHIFT 0
+#define REV_REVID_MASK (0xffff << REV_REVID_SHIFT)
+
+/* Clock Control register */
+#define PERF_CKCTL_REG 0x4
+
+#define CKCTL_6338_ADSLPHY_EN (1 << 0)
+#define CKCTL_6338_MPI_EN (1 << 1)
+#define CKCTL_6338_DRAM_EN (1 << 2)
+#define CKCTL_6338_ENET_EN (1 << 4)
+#define CKCTL_6338_USBS_EN (1 << 4)
+#define CKCTL_6338_SAR_EN (1 << 5)
+#define CKCTL_6338_SPI_EN (1 << 9)
+
+#define CKCTL_6338_ALL_SAFE_EN (CKCTL_6338_ADSLPHY_EN | \
+ CKCTL_6338_MPI_EN | \
+ CKCTL_6338_ENET_EN | \
+ CKCTL_6338_SAR_EN | \
+ CKCTL_6338_SPI_EN)
+
+#define CKCTL_6345_CPU_EN (1 << 0)
+#define CKCTL_6345_BUS_EN (1 << 1)
+#define CKCTL_6345_EBI_EN (1 << 2)
+#define CKCTL_6345_UART_EN (1 << 3)
+#define CKCTL_6345_ADSLPHY_EN (1 << 4)
+#define CKCTL_6345_ENET_EN (1 << 7)
+#define CKCTL_6345_USBH_EN (1 << 8)
+
+#define CKCTL_6345_ALL_SAFE_EN (CKCTL_6345_ENET_EN | \
+ CKCTL_6345_USBH_EN | \
+ CKCTL_6345_ADSLPHY_EN)
+
+#define CKCTL_6348_ADSLPHY_EN (1 << 0)
+#define CKCTL_6348_MPI_EN (1 << 1)
+#define CKCTL_6348_SDRAM_EN (1 << 2)
+#define CKCTL_6348_M2M_EN (1 << 3)
+#define CKCTL_6348_ENET_EN (1 << 4)
+#define CKCTL_6348_SAR_EN (1 << 5)
+#define CKCTL_6348_USBS_EN (1 << 6)
+#define CKCTL_6348_USBH_EN (1 << 8)
+#define CKCTL_6348_SPI_EN (1 << 9)
+
+#define CKCTL_6348_ALL_SAFE_EN (CKCTL_6348_ADSLPHY_EN | \
+ CKCTL_6348_M2M_EN | \
+ CKCTL_6348_ENET_EN | \
+ CKCTL_6348_SAR_EN | \
+ CKCTL_6348_USBS_EN | \
+ CKCTL_6348_USBH_EN | \
+ CKCTL_6348_SPI_EN)
+
+#define CKCTL_6358_ENET_EN (1 << 4)
+#define CKCTL_6358_ADSLPHY_EN (1 << 5)
+#define CKCTL_6358_PCM_EN (1 << 8)
+#define CKCTL_6358_SPI_EN (1 << 9)
+#define CKCTL_6358_USBS_EN (1 << 10)
+#define CKCTL_6358_SAR_EN (1 << 11)
+#define CKCTL_6358_EMUSB_EN (1 << 17)
+#define CKCTL_6358_ENET0_EN (1 << 18)
+#define CKCTL_6358_ENET1_EN (1 << 19)
+#define CKCTL_6358_USBSU_EN (1 << 20)
+#define CKCTL_6358_EPHY_EN (1 << 21)
+
+#define CKCTL_6358_ALL_SAFE_EN (CKCTL_6358_ENET_EN | \
+ CKCTL_6358_ADSLPHY_EN | \
+ CKCTL_6358_PCM_EN | \
+ CKCTL_6358_SPI_EN | \
+ CKCTL_6358_USBS_EN | \
+ CKCTL_6358_SAR_EN | \
+ CKCTL_6358_EMUSB_EN | \
+ CKCTL_6358_ENET0_EN | \
+ CKCTL_6358_ENET1_EN | \
+ CKCTL_6358_USBSU_EN | \
+ CKCTL_6358_EPHY_EN)
+
+/* System PLL Control register */
+#define PERF_SYS_PLL_CTL_REG 0x8
+#define SYS_PLL_SOFT_RESET 0x1
+
+/* Interrupt Mask register */
+#define PERF_IRQMASK_REG 0xc
+#define PERF_IRQSTAT_REG 0x10
+
+/* Interrupt Status register */
+#define PERF_IRQSTAT_REG 0x10
+
+/* External Interrupt Configuration register */
+#define PERF_EXTIRQ_CFG_REG 0x14
+#define EXTIRQ_CFG_SENSE(x) (1 << (x))
+#define EXTIRQ_CFG_STAT(x) (1 << (x + 5))
+#define EXTIRQ_CFG_CLEAR(x) (1 << (x + 10))
+#define EXTIRQ_CFG_MASK(x) (1 << (x + 15))
+#define EXTIRQ_CFG_BOTHEDGE(x) (1 << (x + 20))
+#define EXTIRQ_CFG_LEVELSENSE(x) (1 << (x + 25))
+
+#define EXTIRQ_CFG_CLEAR_ALL (0xf << 10)
+#define EXTIRQ_CFG_MASK_ALL (0xf << 15)
+
+/* Soft Reset register */
+#define PERF_SOFTRESET_REG 0x28
+
+#define SOFTRESET_6338_SPI_MASK (1 << 0)
+#define SOFTRESET_6338_ENET_MASK (1 << 2)
+#define SOFTRESET_6338_USBH_MASK (1 << 3)
+#define SOFTRESET_6338_USBS_MASK (1 << 4)
+#define SOFTRESET_6338_ADSL_MASK (1 << 5)
+#define SOFTRESET_6338_DMAMEM_MASK (1 << 6)
+#define SOFTRESET_6338_SAR_MASK (1 << 7)
+#define SOFTRESET_6338_ACLC_MASK (1 << 8)
+#define SOFTRESET_6338_ADSLMIPSPLL_MASK (1 << 10)
+#define SOFTRESET_6338_ALL (SOFTRESET_6338_SPI_MASK | \
+ SOFTRESET_6338_ENET_MASK | \
+ SOFTRESET_6338_USBH_MASK | \
+ SOFTRESET_6338_USBS_MASK | \
+ SOFTRESET_6338_ADSL_MASK | \
+ SOFTRESET_6338_DMAMEM_MASK | \
+ SOFTRESET_6338_SAR_MASK | \
+ SOFTRESET_6338_ACLC_MASK | \
+ SOFTRESET_6338_ADSLMIPSPLL_MASK)
+
+#define SOFTRESET_6348_SPI_MASK (1 << 0)
+#define SOFTRESET_6348_ENET_MASK (1 << 2)
+#define SOFTRESET_6348_USBH_MASK (1 << 3)
+#define SOFTRESET_6348_USBS_MASK (1 << 4)
+#define SOFTRESET_6348_ADSL_MASK (1 << 5)
+#define SOFTRESET_6348_DMAMEM_MASK (1 << 6)
+#define SOFTRESET_6348_SAR_MASK (1 << 7)
+#define SOFTRESET_6348_ACLC_MASK (1 << 8)
+#define SOFTRESET_6348_ADSLMIPSPLL_MASK (1 << 10)
+
+#define SOFTRESET_6348_ALL (SOFTRESET_6348_SPI_MASK | \
+ SOFTRESET_6348_ENET_MASK | \
+ SOFTRESET_6348_USBH_MASK | \
+ SOFTRESET_6348_USBS_MASK | \
+ SOFTRESET_6348_ADSL_MASK | \
+ SOFTRESET_6348_DMAMEM_MASK | \
+ SOFTRESET_6348_SAR_MASK | \
+ SOFTRESET_6348_ACLC_MASK | \
+ SOFTRESET_6348_ADSLMIPSPLL_MASK)
+
+/* MIPS PLL control register */
+#define PERF_MIPSPLLCTL_REG 0x34
+#define MIPSPLLCTL_N1_SHIFT 20
+#define MIPSPLLCTL_N1_MASK (0x7 << MIPSPLLCTL_N1_SHIFT)
+#define MIPSPLLCTL_N2_SHIFT 15
+#define MIPSPLLCTL_N2_MASK (0x1f << MIPSPLLCTL_N2_SHIFT)
+#define MIPSPLLCTL_M1REF_SHIFT 12
+#define MIPSPLLCTL_M1REF_MASK (0x7 << MIPSPLLCTL_M1REF_SHIFT)
+#define MIPSPLLCTL_M2REF_SHIFT 9
+#define MIPSPLLCTL_M2REF_MASK (0x7 << MIPSPLLCTL_M2REF_SHIFT)
+#define MIPSPLLCTL_M1CPU_SHIFT 6
+#define MIPSPLLCTL_M1CPU_MASK (0x7 << MIPSPLLCTL_M1CPU_SHIFT)
+#define MIPSPLLCTL_M1BUS_SHIFT 3
+#define MIPSPLLCTL_M1BUS_MASK (0x7 << MIPSPLLCTL_M1BUS_SHIFT)
+#define MIPSPLLCTL_M2BUS_SHIFT 0
+#define MIPSPLLCTL_M2BUS_MASK (0x7 << MIPSPLLCTL_M2BUS_SHIFT)
+
+/* ADSL PHY PLL Control register */
+#define PERF_ADSLPLLCTL_REG 0x38
+#define ADSLPLLCTL_N1_SHIFT 20
+#define ADSLPLLCTL_N1_MASK (0x7 << ADSLPLLCTL_N1_SHIFT)
+#define ADSLPLLCTL_N2_SHIFT 15
+#define ADSLPLLCTL_N2_MASK (0x1f << ADSLPLLCTL_N2_SHIFT)
+#define ADSLPLLCTL_M1REF_SHIFT 12
+#define ADSLPLLCTL_M1REF_MASK (0x7 << ADSLPLLCTL_M1REF_SHIFT)
+#define ADSLPLLCTL_M2REF_SHIFT 9
+#define ADSLPLLCTL_M2REF_MASK (0x7 << ADSLPLLCTL_M2REF_SHIFT)
+#define ADSLPLLCTL_M1CPU_SHIFT 6
+#define ADSLPLLCTL_M1CPU_MASK (0x7 << ADSLPLLCTL_M1CPU_SHIFT)
+#define ADSLPLLCTL_M1BUS_SHIFT 3
+#define ADSLPLLCTL_M1BUS_MASK (0x7 << ADSLPLLCTL_M1BUS_SHIFT)
+#define ADSLPLLCTL_M2BUS_SHIFT 0
+#define ADSLPLLCTL_M2BUS_MASK (0x7 << ADSLPLLCTL_M2BUS_SHIFT)
+
+#define ADSLPLLCTL_VAL(n1, n2, m1ref, m2ref, m1cpu, m1bus, m2bus) \
+ (((n1) << ADSLPLLCTL_N1_SHIFT) | \
+ ((n2) << ADSLPLLCTL_N2_SHIFT) | \
+ ((m1ref) << ADSLPLLCTL_M1REF_SHIFT) | \
+ ((m2ref) << ADSLPLLCTL_M2REF_SHIFT) | \
+ ((m1cpu) << ADSLPLLCTL_M1CPU_SHIFT) | \
+ ((m1bus) << ADSLPLLCTL_M1BUS_SHIFT) | \
+ ((m2bus) << ADSLPLLCTL_M2BUS_SHIFT))
+
+
+/*************************************************************************
+ * _REG relative to RSET_TIMER
+ *************************************************************************/
+
+#define BCM63XX_TIMER_COUNT 4
+#define TIMER_T0_ID 0
+#define TIMER_T1_ID 1
+#define TIMER_T2_ID 2
+#define TIMER_WDT_ID 3
+
+/* Timer irqstat register */
+#define TIMER_IRQSTAT_REG 0
+#define TIMER_IRQSTAT_TIMER_CAUSE(x) (1 << (x))
+#define TIMER_IRQSTAT_TIMER0_CAUSE (1 << 0)
+#define TIMER_IRQSTAT_TIMER1_CAUSE (1 << 1)
+#define TIMER_IRQSTAT_TIMER2_CAUSE (1 << 2)
+#define TIMER_IRQSTAT_WDT_CAUSE (1 << 3)
+#define TIMER_IRQSTAT_TIMER_IR_EN(x) (1 << ((x) + 8))
+#define TIMER_IRQSTAT_TIMER0_IR_EN (1 << 8)
+#define TIMER_IRQSTAT_TIMER1_IR_EN (1 << 9)
+#define TIMER_IRQSTAT_TIMER2_IR_EN (1 << 10)
+
+/* Timer control register */
+#define TIMER_CTLx_REG(x) (0x4 + (x * 4))
+#define TIMER_CTL0_REG 0x4
+#define TIMER_CTL1_REG 0x8
+#define TIMER_CTL2_REG 0xC
+#define TIMER_CTL_COUNTDOWN_MASK (0x3fffffff)
+#define TIMER_CTL_MONOTONIC_MASK (1 << 30)
+#define TIMER_CTL_ENABLE_MASK (1 << 31)
+
+
+/*************************************************************************
+ * _REG relative to RSET_WDT
+ *************************************************************************/
+
+/* Watchdog default count register */
+#define WDT_DEFVAL_REG 0x0
+
+/* Watchdog control register */
+#define WDT_CTL_REG 0x4
+
+/* Watchdog control register constants */
+#define WDT_START_1 (0xff00)
+#define WDT_START_2 (0x00ff)
+#define WDT_STOP_1 (0xee00)
+#define WDT_STOP_2 (0x00ee)
+
+/* Watchdog reset length register */
+#define WDT_RSTLEN_REG 0x8
+
+
+/*************************************************************************
+ * _REG relative to RSET_UARTx
+ *************************************************************************/
+
+/* UART Control Register */
+#define UART_CTL_REG 0x0
+#define UART_CTL_RXTMOUTCNT_SHIFT 0
+#define UART_CTL_RXTMOUTCNT_MASK (0x1f << UART_CTL_RXTMOUTCNT_SHIFT)
+#define UART_CTL_RSTTXDN_SHIFT 5
+#define UART_CTL_RSTTXDN_MASK (1 << UART_CTL_RSTTXDN_SHIFT)
+#define UART_CTL_RSTRXFIFO_SHIFT 6
+#define UART_CTL_RSTRXFIFO_MASK (1 << UART_CTL_RSTRXFIFO_SHIFT)
+#define UART_CTL_RSTTXFIFO_SHIFT 7
+#define UART_CTL_RSTTXFIFO_MASK (1 << UART_CTL_RSTTXFIFO_SHIFT)
+#define UART_CTL_STOPBITS_SHIFT 8
+#define UART_CTL_STOPBITS_MASK (0xf << UART_CTL_STOPBITS_SHIFT)
+#define UART_CTL_STOPBITS_1 (0x7 << UART_CTL_STOPBITS_SHIFT)
+#define UART_CTL_STOPBITS_2 (0xf << UART_CTL_STOPBITS_SHIFT)
+#define UART_CTL_BITSPERSYM_SHIFT 12
+#define UART_CTL_BITSPERSYM_MASK (0x3 << UART_CTL_BITSPERSYM_SHIFT)
+#define UART_CTL_XMITBRK_SHIFT 14
+#define UART_CTL_XMITBRK_MASK (1 << UART_CTL_XMITBRK_SHIFT)
+#define UART_CTL_RSVD_SHIFT 15
+#define UART_CTL_RSVD_MASK (1 << UART_CTL_RSVD_SHIFT)
+#define UART_CTL_RXPAREVEN_SHIFT 16
+#define UART_CTL_RXPAREVEN_MASK (1 << UART_CTL_RXPAREVEN_SHIFT)
+#define UART_CTL_RXPAREN_SHIFT 17
+#define UART_CTL_RXPAREN_MASK (1 << UART_CTL_RXPAREN_SHIFT)
+#define UART_CTL_TXPAREVEN_SHIFT 18
+#define UART_CTL_TXPAREVEN_MASK (1 << UART_CTL_TXPAREVEN_SHIFT)
+#define UART_CTL_TXPAREN_SHIFT 18
+#define UART_CTL_TXPAREN_MASK (1 << UART_CTL_TXPAREN_SHIFT)
+#define UART_CTL_LOOPBACK_SHIFT 20
+#define UART_CTL_LOOPBACK_MASK (1 << UART_CTL_LOOPBACK_SHIFT)
+#define UART_CTL_RXEN_SHIFT 21
+#define UART_CTL_RXEN_MASK (1 << UART_CTL_RXEN_SHIFT)
+#define UART_CTL_TXEN_SHIFT 22
+#define UART_CTL_TXEN_MASK (1 << UART_CTL_TXEN_SHIFT)
+#define UART_CTL_BRGEN_SHIFT 23
+#define UART_CTL_BRGEN_MASK (1 << UART_CTL_BRGEN_SHIFT)
+
+/* UART Baudword register */
+#define UART_BAUD_REG 0x4
+
+/* UART Misc Control register */
+#define UART_MCTL_REG 0x8
+#define UART_MCTL_DTR_SHIFT 0
+#define UART_MCTL_DTR_MASK (1 << UART_MCTL_DTR_SHIFT)
+#define UART_MCTL_RTS_SHIFT 1
+#define UART_MCTL_RTS_MASK (1 << UART_MCTL_RTS_SHIFT)
+#define UART_MCTL_RXFIFOTHRESH_SHIFT 8
+#define UART_MCTL_RXFIFOTHRESH_MASK (0xf << UART_MCTL_RXFIFOTHRESH_SHIFT)
+#define UART_MCTL_TXFIFOTHRESH_SHIFT 12
+#define UART_MCTL_TXFIFOTHRESH_MASK (0xf << UART_MCTL_TXFIFOTHRESH_SHIFT)
+#define UART_MCTL_RXFIFOFILL_SHIFT 16
+#define UART_MCTL_RXFIFOFILL_MASK (0x1f << UART_MCTL_RXFIFOFILL_SHIFT)
+#define UART_MCTL_TXFIFOFILL_SHIFT 24
+#define UART_MCTL_TXFIFOFILL_MASK (0x1f << UART_MCTL_TXFIFOFILL_SHIFT)
+
+/* UART External Input Configuration register */
+#define UART_EXTINP_REG 0xc
+#define UART_EXTINP_RI_SHIFT 0
+#define UART_EXTINP_RI_MASK (1 << UART_EXTINP_RI_SHIFT)
+#define UART_EXTINP_CTS_SHIFT 1
+#define UART_EXTINP_CTS_MASK (1 << UART_EXTINP_CTS_SHIFT)
+#define UART_EXTINP_DCD_SHIFT 2
+#define UART_EXTINP_DCD_MASK (1 << UART_EXTINP_DCD_SHIFT)
+#define UART_EXTINP_DSR_SHIFT 3
+#define UART_EXTINP_DSR_MASK (1 << UART_EXTINP_DSR_SHIFT)
+#define UART_EXTINP_IRSTAT(x) (1 << (x + 4))
+#define UART_EXTINP_IRMASK(x) (1 << (x + 8))
+#define UART_EXTINP_IR_RI 0
+#define UART_EXTINP_IR_CTS 1
+#define UART_EXTINP_IR_DCD 2
+#define UART_EXTINP_IR_DSR 3
+#define UART_EXTINP_RI_NOSENSE_SHIFT 16
+#define UART_EXTINP_RI_NOSENSE_MASK (1 << UART_EXTINP_RI_NOSENSE_SHIFT)
+#define UART_EXTINP_CTS_NOSENSE_SHIFT 17
+#define UART_EXTINP_CTS_NOSENSE_MASK (1 << UART_EXTINP_CTS_NOSENSE_SHIFT)
+#define UART_EXTINP_DCD_NOSENSE_SHIFT 18
+#define UART_EXTINP_DCD_NOSENSE_MASK (1 << UART_EXTINP_DCD_NOSENSE_SHIFT)
+#define UART_EXTINP_DSR_NOSENSE_SHIFT 19
+#define UART_EXTINP_DSR_NOSENSE_MASK (1 << UART_EXTINP_DSR_NOSENSE_SHIFT)
+
+/* UART Interrupt register */
+#define UART_IR_REG 0x10
+#define UART_IR_MASK(x) (1 << (x + 16))
+#define UART_IR_STAT(x) (1 << (x))
+#define UART_IR_EXTIP 0
+#define UART_IR_TXUNDER 1
+#define UART_IR_TXOVER 2
+#define UART_IR_TXTRESH 3
+#define UART_IR_TXRDLATCH 4
+#define UART_IR_TXEMPTY 5
+#define UART_IR_RXUNDER 6
+#define UART_IR_RXOVER 7
+#define UART_IR_RXTIMEOUT 8
+#define UART_IR_RXFULL 9
+#define UART_IR_RXTHRESH 10
+#define UART_IR_RXNOTEMPTY 11
+#define UART_IR_RXFRAMEERR 12
+#define UART_IR_RXPARERR 13
+#define UART_IR_RXBRK 14
+#define UART_IR_TXDONE 15
+
+/* UART Fifo register */
+#define UART_FIFO_REG 0x14
+#define UART_FIFO_VALID_SHIFT 0
+#define UART_FIFO_VALID_MASK 0xff
+#define UART_FIFO_FRAMEERR_SHIFT 8
+#define UART_FIFO_FRAMEERR_MASK (1 << UART_FIFO_FRAMEERR_SHIFT)
+#define UART_FIFO_PARERR_SHIFT 9
+#define UART_FIFO_PARERR_MASK (1 << UART_FIFO_PARERR_SHIFT)
+#define UART_FIFO_BRKDET_SHIFT 10
+#define UART_FIFO_BRKDET_MASK (1 << UART_FIFO_BRKDET_SHIFT)
+#define UART_FIFO_ANYERR_MASK (UART_FIFO_FRAMEERR_MASK | \
+ UART_FIFO_PARERR_MASK | \
+ UART_FIFO_BRKDET_MASK)
+
+
+/*************************************************************************
+ * _REG relative to RSET_GPIO
+ *************************************************************************/
+
+/* GPIO registers */
+#define GPIO_CTL_HI_REG 0x0
+#define GPIO_CTL_LO_REG 0x4
+#define GPIO_DATA_HI_REG 0x8
+#define GPIO_DATA_LO_REG 0xC
+
+/* GPIO mux registers and constants */
+#define GPIO_MODE_REG 0x18
+
+#define GPIO_MODE_6348_G4_DIAG 0x00090000
+#define GPIO_MODE_6348_G4_UTOPIA 0x00080000
+#define GPIO_MODE_6348_G4_LEGACY_LED 0x00030000
+#define GPIO_MODE_6348_G4_MII_SNOOP 0x00020000
+#define GPIO_MODE_6348_G4_EXT_EPHY 0x00010000
+#define GPIO_MODE_6348_G3_DIAG 0x00009000
+#define GPIO_MODE_6348_G3_UTOPIA 0x00008000
+#define GPIO_MODE_6348_G3_EXT_MII 0x00007000
+#define GPIO_MODE_6348_G2_DIAG 0x00000900
+#define GPIO_MODE_6348_G2_PCI 0x00000500
+#define GPIO_MODE_6348_G1_DIAG 0x00000090
+#define GPIO_MODE_6348_G1_UTOPIA 0x00000080
+#define GPIO_MODE_6348_G1_SPI_UART 0x00000060
+#define GPIO_MODE_6348_G1_SPI_MASTER 0x00000060
+#define GPIO_MODE_6348_G1_MII_PCCARD 0x00000040
+#define GPIO_MODE_6348_G1_MII_SNOOP 0x00000020
+#define GPIO_MODE_6348_G1_EXT_EPHY 0x00000010
+#define GPIO_MODE_6348_G0_DIAG 0x00000009
+#define GPIO_MODE_6348_G0_EXT_MII 0x00000007
+
+#define GPIO_MODE_6358_EXTRACS (1 << 5)
+#define GPIO_MODE_6358_UART1 (1 << 6)
+#define GPIO_MODE_6358_EXTRA_SPI_SS (1 << 7)
+#define GPIO_MODE_6358_SERIAL_LED (1 << 10)
+#define GPIO_MODE_6358_UTOPIA (1 << 12)
+
+
+/*************************************************************************
+ * _REG relative to RSET_ENET
+ *************************************************************************/
+
+/* Receiver Configuration register */
+#define ENET_RXCFG_REG 0x0
+#define ENET_RXCFG_ALLMCAST_SHIFT 1
+#define ENET_RXCFG_ALLMCAST_MASK (1 << ENET_RXCFG_ALLMCAST_SHIFT)
+#define ENET_RXCFG_PROMISC_SHIFT 3
+#define ENET_RXCFG_PROMISC_MASK (1 << ENET_RXCFG_PROMISC_SHIFT)
+#define ENET_RXCFG_LOOPBACK_SHIFT 4
+#define ENET_RXCFG_LOOPBACK_MASK (1 << ENET_RXCFG_LOOPBACK_SHIFT)
+#define ENET_RXCFG_ENFLOW_SHIFT 5
+#define ENET_RXCFG_ENFLOW_MASK (1 << ENET_RXCFG_ENFLOW_SHIFT)
+
+/* Receive Maximum Length register */
+#define ENET_RXMAXLEN_REG 0x4
+#define ENET_RXMAXLEN_SHIFT 0
+#define ENET_RXMAXLEN_MASK (0x7ff << ENET_RXMAXLEN_SHIFT)
+
+/* Transmit Maximum Length register */
+#define ENET_TXMAXLEN_REG 0x8
+#define ENET_TXMAXLEN_SHIFT 0
+#define ENET_TXMAXLEN_MASK (0x7ff << ENET_TXMAXLEN_SHIFT)
+
+/* MII Status/Control register */
+#define ENET_MIISC_REG 0x10
+#define ENET_MIISC_MDCFREQDIV_SHIFT 0
+#define ENET_MIISC_MDCFREQDIV_MASK (0x7f << ENET_MIISC_MDCFREQDIV_SHIFT)
+#define ENET_MIISC_PREAMBLEEN_SHIFT 7
+#define ENET_MIISC_PREAMBLEEN_MASK (1 << ENET_MIISC_PREAMBLEEN_SHIFT)
+
+/* MII Data register */
+#define ENET_MIIDATA_REG 0x14
+#define ENET_MIIDATA_DATA_SHIFT 0
+#define ENET_MIIDATA_DATA_MASK (0xffff << ENET_MIIDATA_DATA_SHIFT)
+#define ENET_MIIDATA_TA_SHIFT 16
+#define ENET_MIIDATA_TA_MASK (0x3 << ENET_MIIDATA_TA_SHIFT)
+#define ENET_MIIDATA_REG_SHIFT 18
+#define ENET_MIIDATA_REG_MASK (0x1f << ENET_MIIDATA_REG_SHIFT)
+#define ENET_MIIDATA_PHYID_SHIFT 23
+#define ENET_MIIDATA_PHYID_MASK (0x1f << ENET_MIIDATA_PHYID_SHIFT)
+#define ENET_MIIDATA_OP_READ_MASK (0x6 << 28)
+#define ENET_MIIDATA_OP_WRITE_MASK (0x5 << 28)
+
+/* Ethernet Interrupt Mask register */
+#define ENET_IRMASK_REG 0x18
+
+/* Ethernet Interrupt register */
+#define ENET_IR_REG 0x1c
+#define ENET_IR_MII (1 << 0)
+#define ENET_IR_MIB (1 << 1)
+#define ENET_IR_FLOWC (1 << 2)
+
+/* Ethernet Control register */
+#define ENET_CTL_REG 0x2c
+#define ENET_CTL_ENABLE_SHIFT 0
+#define ENET_CTL_ENABLE_MASK (1 << ENET_CTL_ENABLE_SHIFT)
+#define ENET_CTL_DISABLE_SHIFT 1
+#define ENET_CTL_DISABLE_MASK (1 << ENET_CTL_DISABLE_SHIFT)
+#define ENET_CTL_SRESET_SHIFT 2
+#define ENET_CTL_SRESET_MASK (1 << ENET_CTL_SRESET_SHIFT)
+#define ENET_CTL_EPHYSEL_SHIFT 3
+#define ENET_CTL_EPHYSEL_MASK (1 << ENET_CTL_EPHYSEL_SHIFT)
+
+/* Transmit Control register */
+#define ENET_TXCTL_REG 0x30
+#define ENET_TXCTL_FD_SHIFT 0
+#define ENET_TXCTL_FD_MASK (1 << ENET_TXCTL_FD_SHIFT)
+
+/* Transmit Watermask register */
+#define ENET_TXWMARK_REG 0x34
+#define ENET_TXWMARK_WM_SHIFT 0
+#define ENET_TXWMARK_WM_MASK (0x3f << ENET_TXWMARK_WM_SHIFT)
+
+/* MIB Control register */
+#define ENET_MIBCTL_REG 0x38
+#define ENET_MIBCTL_RDCLEAR_SHIFT 0
+#define ENET_MIBCTL_RDCLEAR_MASK (1 << ENET_MIBCTL_RDCLEAR_SHIFT)
+
+/* Perfect Match Data Low register */
+#define ENET_PML_REG(x) (0x58 + (x) * 8)
+#define ENET_PMH_REG(x) (0x5c + (x) * 8)
+#define ENET_PMH_DATAVALID_SHIFT 16
+#define ENET_PMH_DATAVALID_MASK (1 << ENET_PMH_DATAVALID_SHIFT)
+
+/* MIB register */
+#define ENET_MIB_REG(x) (0x200 + (x) * 4)
+#define ENET_MIB_REG_COUNT 55
+
+
+/*************************************************************************
+ * _REG relative to RSET_ENETDMA
+ *************************************************************************/
+
+/* Controller Configuration Register */
+#define ENETDMA_CFG_REG (0x0)
+#define ENETDMA_CFG_EN_SHIFT 0
+#define ENETDMA_CFG_EN_MASK (1 << ENETDMA_CFG_EN_SHIFT)
+#define ENETDMA_CFG_FLOWCH_MASK(x) (1 << ((x >> 1) + 1))
+
+/* Flow Control Descriptor Low Threshold register */
+#define ENETDMA_FLOWCL_REG(x) (0x4 + (x) * 6)
+
+/* Flow Control Descriptor High Threshold register */
+#define ENETDMA_FLOWCH_REG(x) (0x8 + (x) * 6)
+
+/* Flow Control Descriptor Buffer Alloca Threshold register */
+#define ENETDMA_BUFALLOC_REG(x) (0xc + (x) * 6)
+#define ENETDMA_BUFALLOC_FORCE_SHIFT 31
+#define ENETDMA_BUFALLOC_FORCE_MASK (1 << ENETDMA_BUFALLOC_FORCE_SHIFT)
+
+/* Channel Configuration register */
+#define ENETDMA_CHANCFG_REG(x) (0x100 + (x) * 0x10)
+#define ENETDMA_CHANCFG_EN_SHIFT 0
+#define ENETDMA_CHANCFG_EN_MASK (1 << ENETDMA_CHANCFG_EN_SHIFT)
+#define ENETDMA_CHANCFG_PKTHALT_SHIFT 1
+#define ENETDMA_CHANCFG_PKTHALT_MASK (1 << ENETDMA_CHANCFG_PKTHALT_SHIFT)
+
+/* Interrupt Control/Status register */
+#define ENETDMA_IR_REG(x) (0x104 + (x) * 0x10)
+#define ENETDMA_IR_BUFDONE_MASK (1 << 0)
+#define ENETDMA_IR_PKTDONE_MASK (1 << 1)
+#define ENETDMA_IR_NOTOWNER_MASK (1 << 2)
+
+/* Interrupt Mask register */
+#define ENETDMA_IRMASK_REG(x) (0x108 + (x) * 0x10)
+
+/* Maximum Burst Length */
+#define ENETDMA_MAXBURST_REG(x) (0x10C + (x) * 0x10)
+
+/* Ring Start Address register */
+#define ENETDMA_RSTART_REG(x) (0x200 + (x) * 0x10)
+
+/* State Ram Word 2 */
+#define ENETDMA_SRAM2_REG(x) (0x204 + (x) * 0x10)
+
+/* State Ram Word 3 */
+#define ENETDMA_SRAM3_REG(x) (0x208 + (x) * 0x10)
+
+/* State Ram Word 4 */
+#define ENETDMA_SRAM4_REG(x) (0x20c + (x) * 0x10)
+
+
+/*************************************************************************
+ * _REG relative to RSET_OHCI_PRIV
+ *************************************************************************/
+
+#define OHCI_PRIV_REG 0x0
+#define OHCI_PRIV_PORT1_HOST_SHIFT 0
+#define OHCI_PRIV_PORT1_HOST_MASK (1 << OHCI_PRIV_PORT1_HOST_SHIFT)
+#define OHCI_PRIV_REG_SWAP_SHIFT 3
+#define OHCI_PRIV_REG_SWAP_MASK (1 << OHCI_PRIV_REG_SWAP_SHIFT)
+
+
+/*************************************************************************
+ * _REG relative to RSET_USBH_PRIV
+ *************************************************************************/
+
+#define USBH_PRIV_SWAP_REG 0x0
+#define USBH_PRIV_SWAP_EHCI_ENDN_SHIFT 4
+#define USBH_PRIV_SWAP_EHCI_ENDN_MASK (1 << USBH_PRIV_SWAP_EHCI_ENDN_SHIFT)
+#define USBH_PRIV_SWAP_EHCI_DATA_SHIFT 3
+#define USBH_PRIV_SWAP_EHCI_DATA_MASK (1 << USBH_PRIV_SWAP_EHCI_DATA_SHIFT)
+#define USBH_PRIV_SWAP_OHCI_ENDN_SHIFT 1
+#define USBH_PRIV_SWAP_OHCI_ENDN_MASK (1 << USBH_PRIV_SWAP_OHCI_ENDN_SHIFT)
+#define USBH_PRIV_SWAP_OHCI_DATA_SHIFT 0
+#define USBH_PRIV_SWAP_OHCI_DATA_MASK (1 << USBH_PRIV_SWAP_OHCI_DATA_SHIFT)
+
+#define USBH_PRIV_TEST_REG 0x24
+
+
+/*************************************************************************
+ * _REG relative to RSET_MPI
+ *************************************************************************/
+
+/* well known (hard wired) chip select */
+#define MPI_CS_PCMCIA_COMMON 4
+#define MPI_CS_PCMCIA_ATTR 5
+#define MPI_CS_PCMCIA_IO 6
+
+/* Chip select base register */
+#define MPI_CSBASE_REG(x) (0x0 + (x) * 8)
+#define MPI_CSBASE_BASE_SHIFT 13
+#define MPI_CSBASE_BASE_MASK (0x1ffff << MPI_CSBASE_BASE_SHIFT)
+#define MPI_CSBASE_SIZE_SHIFT 0
+#define MPI_CSBASE_SIZE_MASK (0xf << MPI_CSBASE_SIZE_SHIFT)
+
+#define MPI_CSBASE_SIZE_8K 0
+#define MPI_CSBASE_SIZE_16K 1
+#define MPI_CSBASE_SIZE_32K 2
+#define MPI_CSBASE_SIZE_64K 3
+#define MPI_CSBASE_SIZE_128K 4
+#define MPI_CSBASE_SIZE_256K 5
+#define MPI_CSBASE_SIZE_512K 6
+#define MPI_CSBASE_SIZE_1M 7
+#define MPI_CSBASE_SIZE_2M 8
+#define MPI_CSBASE_SIZE_4M 9
+#define MPI_CSBASE_SIZE_8M 10
+#define MPI_CSBASE_SIZE_16M 11
+#define MPI_CSBASE_SIZE_32M 12
+#define MPI_CSBASE_SIZE_64M 13
+#define MPI_CSBASE_SIZE_128M 14
+#define MPI_CSBASE_SIZE_256M 15
+
+/* Chip select control register */
+#define MPI_CSCTL_REG(x) (0x4 + (x) * 8)
+#define MPI_CSCTL_ENABLE_MASK (1 << 0)
+#define MPI_CSCTL_WAIT_SHIFT 1
+#define MPI_CSCTL_WAIT_MASK (0x7 << MPI_CSCTL_WAIT_SHIFT)
+#define MPI_CSCTL_DATA16_MASK (1 << 4)
+#define MPI_CSCTL_SYNCMODE_MASK (1 << 7)
+#define MPI_CSCTL_TSIZE_MASK (1 << 8)
+#define MPI_CSCTL_ENDIANSWAP_MASK (1 << 10)
+#define MPI_CSCTL_SETUP_SHIFT 16
+#define MPI_CSCTL_SETUP_MASK (0xf << MPI_CSCTL_SETUP_SHIFT)
+#define MPI_CSCTL_HOLD_SHIFT 20
+#define MPI_CSCTL_HOLD_MASK (0xf << MPI_CSCTL_HOLD_SHIFT)
+
+/* PCI registers */
+#define MPI_SP0_RANGE_REG 0x100
+#define MPI_SP0_REMAP_REG 0x104
+#define MPI_SP0_REMAP_ENABLE_MASK (1 << 0)
+#define MPI_SP1_RANGE_REG 0x10C
+#define MPI_SP1_REMAP_REG 0x110
+#define MPI_SP1_REMAP_ENABLE_MASK (1 << 0)
+
+#define MPI_L2PCFG_REG 0x11C
+#define MPI_L2PCFG_CFG_TYPE_SHIFT 0
+#define MPI_L2PCFG_CFG_TYPE_MASK (0x3 << MPI_L2PCFG_CFG_TYPE_SHIFT)
+#define MPI_L2PCFG_REG_SHIFT 2
+#define MPI_L2PCFG_REG_MASK (0x3f << MPI_L2PCFG_REG_SHIFT)
+#define MPI_L2PCFG_FUNC_SHIFT 8
+#define MPI_L2PCFG_FUNC_MASK (0x7 << MPI_L2PCFG_FUNC_SHIFT)
+#define MPI_L2PCFG_DEVNUM_SHIFT 11
+#define MPI_L2PCFG_DEVNUM_MASK (0x1f << MPI_L2PCFG_DEVNUM_SHIFT)
+#define MPI_L2PCFG_CFG_USEREG_MASK (1 << 30)
+#define MPI_L2PCFG_CFG_SEL_MASK (1 << 31)
+
+#define MPI_L2PMEMRANGE1_REG 0x120
+#define MPI_L2PMEMBASE1_REG 0x124
+#define MPI_L2PMEMREMAP1_REG 0x128
+#define MPI_L2PMEMRANGE2_REG 0x12C
+#define MPI_L2PMEMBASE2_REG 0x130
+#define MPI_L2PMEMREMAP2_REG 0x134
+#define MPI_L2PIORANGE_REG 0x138
+#define MPI_L2PIOBASE_REG 0x13C
+#define MPI_L2PIOREMAP_REG 0x140
+#define MPI_L2P_BASE_MASK (0xffff8000)
+#define MPI_L2PREMAP_ENABLED_MASK (1 << 0)
+#define MPI_L2PREMAP_IS_CARDBUS_MASK (1 << 2)
+
+#define MPI_PCIMODESEL_REG 0x144
+#define MPI_PCIMODESEL_BAR1_NOSWAP_MASK (1 << 0)
+#define MPI_PCIMODESEL_BAR2_NOSWAP_MASK (1 << 1)
+#define MPI_PCIMODESEL_EXT_ARB_MASK (1 << 2)
+#define MPI_PCIMODESEL_PREFETCH_SHIFT 4
+#define MPI_PCIMODESEL_PREFETCH_MASK (0xf << MPI_PCIMODESEL_PREFETCH_SHIFT)
+
+#define MPI_LOCBUSCTL_REG 0x14C
+#define MPI_LOCBUSCTL_EN_PCI_GPIO_MASK (1 << 0)
+#define MPI_LOCBUSCTL_U2P_NOSWAP_MASK (1 << 1)
+
+#define MPI_LOCINT_REG 0x150
+#define MPI_LOCINT_MASK(x) (1 << (x + 16))
+#define MPI_LOCINT_STAT(x) (1 << (x))
+#define MPI_LOCINT_DIR_FAILED 6
+#define MPI_LOCINT_EXT_PCI_INT 7
+#define MPI_LOCINT_SERR 8
+#define MPI_LOCINT_CSERR 9
+
+#define MPI_PCICFGCTL_REG 0x178
+#define MPI_PCICFGCTL_CFGADDR_SHIFT 2
+#define MPI_PCICFGCTL_CFGADDR_MASK (0x1f << MPI_PCICFGCTL_CFGADDR_SHIFT)
+#define MPI_PCICFGCTL_WRITEEN_MASK (1 << 7)
+
+#define MPI_PCICFGDATA_REG 0x17C
+
+/* PCI host bridge custom register */
+#define BCMPCI_REG_TIMERS 0x40
+#define REG_TIMER_TRDY_SHIFT 0
+#define REG_TIMER_TRDY_MASK (0xff << REG_TIMER_TRDY_SHIFT)
+#define REG_TIMER_RETRY_SHIFT 8
+#define REG_TIMER_RETRY_MASK (0xff << REG_TIMER_RETRY_SHIFT)
+
+
+/*************************************************************************
+ * _REG relative to RSET_PCMCIA
+ *************************************************************************/
+
+#define PCMCIA_C1_REG 0x0
+#define PCMCIA_C1_CD1_MASK (1 << 0)
+#define PCMCIA_C1_CD2_MASK (1 << 1)
+#define PCMCIA_C1_VS1_MASK (1 << 2)
+#define PCMCIA_C1_VS2_MASK (1 << 3)
+#define PCMCIA_C1_VS1OE_MASK (1 << 6)
+#define PCMCIA_C1_VS2OE_MASK (1 << 7)
+#define PCMCIA_C1_CBIDSEL_SHIFT (8)
+#define PCMCIA_C1_CBIDSEL_MASK (0x1f << PCMCIA_C1_CBIDSEL_SHIFT)
+#define PCMCIA_C1_EN_PCMCIA_GPIO_MASK (1 << 13)
+#define PCMCIA_C1_EN_PCMCIA_MASK (1 << 14)
+#define PCMCIA_C1_EN_CARDBUS_MASK (1 << 15)
+#define PCMCIA_C1_RESET_MASK (1 << 18)
+
+#define PCMCIA_C2_REG 0x8
+#define PCMCIA_C2_DATA16_MASK (1 << 0)
+#define PCMCIA_C2_BYTESWAP_MASK (1 << 1)
+#define PCMCIA_C2_RWCOUNT_SHIFT 2
+#define PCMCIA_C2_RWCOUNT_MASK (0x3f << PCMCIA_C2_RWCOUNT_SHIFT)
+#define PCMCIA_C2_INACTIVE_SHIFT 8
+#define PCMCIA_C2_INACTIVE_MASK (0x3f << PCMCIA_C2_INACTIVE_SHIFT)
+#define PCMCIA_C2_SETUP_SHIFT 16
+#define PCMCIA_C2_SETUP_MASK (0x3f << PCMCIA_C2_SETUP_SHIFT)
+#define PCMCIA_C2_HOLD_SHIFT 24
+#define PCMCIA_C2_HOLD_MASK (0x3f << PCMCIA_C2_HOLD_SHIFT)
+
+
+/*************************************************************************
+ * _REG relative to RSET_SDRAM
+ *************************************************************************/
+
+#define SDRAM_CFG_REG 0x0
+#define SDRAM_CFG_ROW_SHIFT 4
+#define SDRAM_CFG_ROW_MASK (0x3 << SDRAM_CFG_ROW_SHIFT)
+#define SDRAM_CFG_COL_SHIFT 6
+#define SDRAM_CFG_COL_MASK (0x3 << SDRAM_CFG_COL_SHIFT)
+#define SDRAM_CFG_32B_SHIFT 10
+#define SDRAM_CFG_32B_MASK (1 << SDRAM_CFG_32B_SHIFT)
+#define SDRAM_CFG_BANK_SHIFT 13
+#define SDRAM_CFG_BANK_MASK (1 << SDRAM_CFG_BANK_SHIFT)
+
+#define SDRAM_PRIO_REG 0x2C
+#define SDRAM_PRIO_MIPS_SHIFT 29
+#define SDRAM_PRIO_MIPS_MASK (1 << SDRAM_PRIO_MIPS_SHIFT)
+#define SDRAM_PRIO_ADSL_SHIFT 30
+#define SDRAM_PRIO_ADSL_MASK (1 << SDRAM_PRIO_ADSL_SHIFT)
+#define SDRAM_PRIO_EN_SHIFT 31
+#define SDRAM_PRIO_EN_MASK (1 << SDRAM_PRIO_EN_SHIFT)
+
+
+/*************************************************************************
+ * _REG relative to RSET_MEMC
+ *************************************************************************/
+
+#define MEMC_CFG_REG 0x4
+#define MEMC_CFG_32B_SHIFT 1
+#define MEMC_CFG_32B_MASK (1 << MEMC_CFG_32B_SHIFT)
+#define MEMC_CFG_COL_SHIFT 3
+#define MEMC_CFG_COL_MASK (0x3 << MEMC_CFG_COL_SHIFT)
+#define MEMC_CFG_ROW_SHIFT 6
+#define MEMC_CFG_ROW_MASK (0x3 << MEMC_CFG_ROW_SHIFT)
+
+
+/*************************************************************************
+ * _REG relative to RSET_DDR
+ *************************************************************************/
+
+#define DDR_DMIPSPLLCFG_REG 0x18
+#define DMIPSPLLCFG_M1_SHIFT 0
+#define DMIPSPLLCFG_M1_MASK (0xff << DMIPSPLLCFG_M1_SHIFT)
+#define DMIPSPLLCFG_N1_SHIFT 23
+#define DMIPSPLLCFG_N1_MASK (0x3f << DMIPSPLLCFG_N1_SHIFT)
+#define DMIPSPLLCFG_N2_SHIFT 29
+#define DMIPSPLLCFG_N2_MASK (0x7 << DMIPSPLLCFG_N2_SHIFT)
+
+#endif /* BCM63XX_REGS_H_ */
+
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_timer.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_timer.h
new file mode 100644
index 0000000..c0fce83
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_timer.h
@@ -0,0 +1,11 @@
+#ifndef BCM63XX_TIMER_H_
+#define BCM63XX_TIMER_H_
+
+int bcm63xx_timer_register(int id, void (*callback)(void *data), void *data);
+void bcm63xx_timer_unregister(int id);
+int bcm63xx_timer_set(int id, int monotonic, unsigned int countdown_us);
+int bcm63xx_timer_enable(int id);
+int bcm63xx_timer_disable(int id);
+unsigned int bcm63xx_timer_countdown(unsigned int countdown_us);
+
+#endif /* !BCM63XX_TIMER_H_ */
diff --git a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
new file mode 100644
index 0000000..6479090
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
@@ -0,0 +1,60 @@
+#ifndef BOARD_BCM963XX_H_
+#define BOARD_BCM963XX_H_
+
+#include <linux/types.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <bcm63xx_dev_enet.h>
+#include <bcm63xx_dev_dsp.h>
+
+/*
+ * flash mapping
+ */
+#define BCM963XX_CFE_VERSION_OFFSET 0x570
+#define BCM963XX_NVRAM_OFFSET 0x580
+
+/*
+ * nvram structure
+ */
+struct bcm963xx_nvram {
+ u32 version;
+ u8 reserved1[256];
+ u8 name[16];
+ u32 main_tp_number;
+ u32 psi_size;
+ u32 mac_addr_count;
+ u8 mac_addr_base[6];
+ u8 reserved2[2];
+ u32 checksum_old;
+ u8 reserved3[720];
+ u32 checksum_high;
+};
+
+/*
+ * board definition
+ */
+struct board_info {
+ u8 name[16];
+ unsigned int expected_cpu_id;
+
+ /* enabled feature/device */
+ unsigned int has_enet0:1;
+ unsigned int has_enet1:1;
+ unsigned int has_pci:1;
+ unsigned int has_pccard:1;
+ unsigned int has_ohci0:1;
+ unsigned int has_ehci0:1;
+ unsigned int has_dsp:1;
+
+ /* ethernet config */
+ struct bcm63xx_enet_platform_data enet0;
+ struct bcm63xx_enet_platform_data enet1;
+
+ /* DSP config */
+ struct bcm63xx_dsp_platform_data dsp;
+
+ /* GPIO LEDs */
+ struct gpio_led leds[5];
+};
+
+#endif /* ! BOARD_BCM963XX_H_ */
diff --git a/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h b/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h
new file mode 100644
index 0000000..71742bac
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h
@@ -0,0 +1,51 @@
+#ifndef __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H
+
+#include <bcm63xx_cpu.h>
+
+#define cpu_has_tlb 1
+#define cpu_has_4kex 1
+#define cpu_has_4k_cache 1
+#define cpu_has_fpu 0
+#define cpu_has_32fpr 0
+#define cpu_has_counter 1
+#define cpu_has_watch 0
+#define cpu_has_divec 1
+#define cpu_has_vce 0
+#define cpu_has_cache_cdex_p 0
+#define cpu_has_cache_cdex_s 0
+#define cpu_has_prefetch 1
+#define cpu_has_mcheck 1
+#define cpu_has_ejtag 1
+#define cpu_has_llsc 1
+#define cpu_has_mips16 0
+#define cpu_has_mdmx 0
+#define cpu_has_mips3d 0
+#define cpu_has_smartmips 0
+#define cpu_has_vtag_icache 0
+
+#if !defined(BCMCPU_RUNTIME_DETECT) && (defined(CONFIG_BCMCPU_IS_6348) || defined(CONFIG_CPU_IS_6338) || defined(CONFIG_CPU_IS_BCM6345))
+#define cpu_has_dc_aliases 0
+#endif
+
+#define cpu_has_ic_fills_f_dc 0
+#define cpu_has_pindexed_dcache 0
+
+#define cpu_has_mips32r1 1
+#define cpu_has_mips32r2 0
+#define cpu_has_mips64r1 0
+#define cpu_has_mips64r2 0
+
+#define cpu_has_dsp 0
+#define cpu_has_mipsmt 0
+#define cpu_has_userlocal 0
+
+#define cpu_has_nofpuex 0
+#define cpu_has_64bits 0
+#define cpu_has_64bit_zero_reg 0
+
+#define cpu_dcache_line_size() 16
+#define cpu_icache_line_size() 16
+#define cpu_scache_line_size() 0
+
+#endif /* __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-bcm63xx/gpio.h b/arch/mips/include/asm/mach-bcm63xx/gpio.h
new file mode 100644
index 0000000..7cda8c0
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/gpio.h
@@ -0,0 +1,15 @@
+#ifndef __ASM_MIPS_MACH_BCM63XX_GPIO_H
+#define __ASM_MIPS_MACH_BCM63XX_GPIO_H
+
+#include <bcm63xx_gpio.h>
+
+#define gpio_to_irq(gpio) NULL
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+
+#define gpio_cansleep __gpio_cansleep
+
+#include <asm-generic/gpio.h>
+
+#endif /* __ASM_MIPS_MACH_BCM63XX_GPIO_H */
diff --git a/arch/mips/include/asm/mach-bcm63xx/war.h b/arch/mips/include/asm/mach-bcm63xx/war.h
new file mode 100644
index 0000000..8e3f3fd
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_BCM63XX_WAR_H
+#define __ASM_MIPS_MACH_BCM63XX_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_BCM63XX_WAR_H */
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 0d4d5ea..91bfe73 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -16,6 +16,8 @@
obj-$(CONFIG_NEC_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o
obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o
+obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \
+ ops-bcm63xx.o
#
# These are still pretty much in the old state, watch, go blind.
diff --git a/arch/mips/pci/fixup-bcm63xx.c b/arch/mips/pci/fixup-bcm63xx.c
new file mode 100644
index 0000000..3408630
--- /dev/null
+++ b/arch/mips/pci/fixup-bcm63xx.c
@@ -0,0 +1,21 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <bcm63xx_cpu.h>
+
+int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ return bcm63xx_get_irq_number(IRQ_PCI);
+}
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}
diff --git a/arch/mips/pci/ops-bcm63xx.c b/arch/mips/pci/ops-bcm63xx.c
new file mode 100644
index 0000000..822ae17
--- /dev/null
+++ b/arch/mips/pci/ops-bcm63xx.c
@@ -0,0 +1,467 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include "pci-bcm63xx.h"
+
+/*
+ * swizzle 32bits data to return only the needed part
+ */
+static int postprocess_read(u32 data, int where, unsigned int size)
+{
+ u32 ret;
+
+ ret = 0;
+ switch (size) {
+ case 1:
+ ret = (data >> ((where & 3) << 3)) & 0xff;
+ break;
+ case 2:
+ ret = (data >> ((where & 3) << 3)) & 0xffff;
+ break;
+ case 4:
+ ret = data;
+ break;
+ }
+ return ret;
+}
+
+static int preprocess_write(u32 orig_data, u32 val, int where,
+ unsigned int size)
+{
+ u32 ret;
+
+ ret = 0;
+ switch (size) {
+ case 1:
+ ret = (orig_data & ~(0xff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ break;
+ case 2:
+ ret = (orig_data & ~(0xffff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ break;
+ case 4:
+ ret = val;
+ break;
+ }
+ return ret;
+}
+
+/*
+ * setup hardware for a configuration cycle with given parameters
+ */
+static int bcm63xx_setup_cfg_access(int type, unsigned int busn,
+ unsigned int devfn, int where)
+{
+ unsigned int slot, func, reg;
+ u32 val;
+
+ slot = PCI_SLOT(devfn);
+ func = PCI_FUNC(devfn);
+ reg = where >> 2;
+
+ /* sanity check */
+ if (slot > (MPI_L2PCFG_DEVNUM_MASK >> MPI_L2PCFG_DEVNUM_SHIFT))
+ return 1;
+
+ if (func > (MPI_L2PCFG_FUNC_MASK >> MPI_L2PCFG_FUNC_SHIFT))
+ return 1;
+
+ if (reg > (MPI_L2PCFG_REG_MASK >> MPI_L2PCFG_REG_SHIFT))
+ return 1;
+
+ /* ok, setup config access */
+ val = (reg << MPI_L2PCFG_REG_SHIFT);
+ val |= (func << MPI_L2PCFG_FUNC_SHIFT);
+ val |= (slot << MPI_L2PCFG_DEVNUM_SHIFT);
+ val |= MPI_L2PCFG_CFG_USEREG_MASK;
+ val |= MPI_L2PCFG_CFG_SEL_MASK;
+ /* type 0 cycle for local bus, type 1 cycle for anything else */
+ if (type != 0) {
+ /* FIXME: how to specify bus ??? */
+ val |= (1 << MPI_L2PCFG_CFG_TYPE_SHIFT);
+ }
+ bcm_mpi_writel(val, MPI_L2PCFG_REG);
+
+ return 0;
+}
+
+static int bcm63xx_do_cfg_read(int type, unsigned int busn,
+ unsigned int devfn, int where, int size,
+ u32 *val)
+{
+ u32 data;
+
+ /* two phase cycle, first we write address, then read data at
+ * another location, caller already has a spinlock so no need
+ * to add one here */
+ if (bcm63xx_setup_cfg_access(type, busn, devfn, where))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ iob();
+ data = le32_to_cpu(__raw_readl(pci_iospace_start));
+ /* restore IO space normal behaviour */
+ bcm_mpi_writel(0, MPI_L2PCFG_REG);
+
+ *val = postprocess_read(data, where, size);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int bcm63xx_do_cfg_write(int type, unsigned int busn,
+ unsigned int devfn, int where, int size,
+ u32 val)
+{
+ u32 data;
+
+ /* two phase cycle, first we write address, then write data to
+ * another location, caller already has a spinlock so no need
+ * to add one here */
+ if (bcm63xx_setup_cfg_access(type, busn, devfn, where))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ iob();
+
+ data = le32_to_cpu(__raw_readl(pci_iospace_start));
+ data = preprocess_write(data, val, where, size);
+
+ __raw_writel(cpu_to_le32(data), pci_iospace_start);
+ wmb();
+ /* no way to know the access is done, we have to wait */
+ udelay(500);
+ /* restore IO space normal behaviour */
+ bcm_mpi_writel(0, MPI_L2PCFG_REG);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int bcm63xx_pci_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ int type;
+
+ type = bus->parent ? 1 : 0;
+
+ if (type == 0 && PCI_SLOT(devfn) == CARDBUS_PCI_IDSEL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ return bcm63xx_do_cfg_read(type, bus->number, devfn,
+ where, size, val);
+}
+
+static int bcm63xx_pci_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ int type;
+
+ type = bus->parent ? 1 : 0;
+
+ if (type == 0 && PCI_SLOT(devfn) == CARDBUS_PCI_IDSEL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ return bcm63xx_do_cfg_write(type, bus->number, devfn,
+ where, size, val);
+}
+
+struct pci_ops bcm63xx_pci_ops = {
+ .read = bcm63xx_pci_read,
+ .write = bcm63xx_pci_write
+};
+
+#ifdef CONFIG_CARDBUS
+/*
+ * emulate configuration read access on a cardbus bridge
+ */
+#define FAKE_CB_BRIDGE_SLOT 0x1e
+
+static int fake_cb_bridge_bus_number = -1;
+
+static struct {
+ u16 pci_command;
+ u8 cb_latency;
+ u8 subordinate_busn;
+ u8 cardbus_busn;
+ u8 pci_busn;
+ int bus_assigned;
+ u16 bridge_control;
+
+ u32 mem_base0;
+ u32 mem_limit0;
+ u32 mem_base1;
+ u32 mem_limit1;
+
+ u32 io_base0;
+ u32 io_limit0;
+ u32 io_base1;
+ u32 io_limit1;
+} fake_cb_bridge_regs;
+
+static int fake_cb_bridge_read(int where, int size, u32 *val)
+{
+ unsigned int reg;
+ u32 data;
+
+ data = 0;
+ reg = where >> 2;
+ switch (reg) {
+ case (PCI_VENDOR_ID >> 2):
+ case (PCI_CB_SUBSYSTEM_VENDOR_ID >> 2):
+ /* create dummy vendor/device id from our cpu id */
+ data = (bcm63xx_get_cpu_id() << 16) | PCI_VENDOR_ID_BROADCOM;
+ break;
+
+ case (PCI_COMMAND >> 2):
+ data = (PCI_STATUS_DEVSEL_SLOW << 16);
+ data |= fake_cb_bridge_regs.pci_command;
+ break;
+
+ case (PCI_CLASS_REVISION >> 2):
+ data = (PCI_CLASS_BRIDGE_CARDBUS << 16);
+ break;
+
+ case (PCI_CACHE_LINE_SIZE >> 2):
+ data = (PCI_HEADER_TYPE_CARDBUS << 16);
+ break;
+
+ case (PCI_INTERRUPT_LINE >> 2):
+ /* bridge control */
+ data = (fake_cb_bridge_regs.bridge_control << 16);
+ /* pin:intA line:0xff */
+ data |= (0x1 << 8) | 0xff;
+ break;
+
+ case (PCI_CB_PRIMARY_BUS >> 2):
+ data = (fake_cb_bridge_regs.cb_latency << 24);
+ data |= (fake_cb_bridge_regs.subordinate_busn << 16);
+ data |= (fake_cb_bridge_regs.cardbus_busn << 8);
+ data |= fake_cb_bridge_regs.pci_busn;
+ break;
+
+ case (PCI_CB_MEMORY_BASE_0 >> 2):
+ data = fake_cb_bridge_regs.mem_base0;
+ break;
+
+ case (PCI_CB_MEMORY_LIMIT_0 >> 2):
+ data = fake_cb_bridge_regs.mem_limit0;
+ break;
+
+ case (PCI_CB_MEMORY_BASE_1 >> 2):
+ data = fake_cb_bridge_regs.mem_base1;
+ break;
+
+ case (PCI_CB_MEMORY_LIMIT_1 >> 2):
+ data = fake_cb_bridge_regs.mem_limit1;
+ break;
+
+ case (PCI_CB_IO_BASE_0 >> 2):
+ /* | 1 for 32bits io support */
+ data = fake_cb_bridge_regs.io_base0 | 0x1;
+ break;
+
+ case (PCI_CB_IO_LIMIT_0 >> 2):
+ data = fake_cb_bridge_regs.io_limit0;
+ break;
+
+ case (PCI_CB_IO_BASE_1 >> 2):
+ /* | 1 for 32bits io support */
+ data = fake_cb_bridge_regs.io_base1 | 0x1;
+ break;
+
+ case (PCI_CB_IO_LIMIT_1 >> 2):
+ data = fake_cb_bridge_regs.io_limit1;
+ break;
+ }
+
+ *val = postprocess_read(data, where, size);
+ return PCIBIOS_SUCCESSFUL;
+}
+
+/*
+ * emulate configuration write access on a cardbus bridge
+ */
+static int fake_cb_bridge_write(int where, int size, u32 val)
+{
+ unsigned int reg;
+ u32 data, tmp;
+ int ret;
+
+ ret = fake_cb_bridge_read((where & ~0x3), 4, &data);
+ if (ret != PCIBIOS_SUCCESSFUL)
+ return ret;
+
+ data = preprocess_write(data, val, where, size);
+
+ reg = where >> 2;
+ switch (reg) {
+ case (PCI_COMMAND >> 2):
+ fake_cb_bridge_regs.pci_command = (data & 0xffff);
+ break;
+
+ case (PCI_CB_PRIMARY_BUS >> 2):
+ fake_cb_bridge_regs.cb_latency = (data >> 24) & 0xff;
+ fake_cb_bridge_regs.subordinate_busn = (data >> 16) & 0xff;
+ fake_cb_bridge_regs.cardbus_busn = (data >> 8) & 0xff;
+ fake_cb_bridge_regs.pci_busn = data & 0xff;
+ if (fake_cb_bridge_regs.cardbus_busn)
+ fake_cb_bridge_regs.bus_assigned = 1;
+ break;
+
+ case (PCI_INTERRUPT_LINE >> 2):
+ tmp = (data >> 16) & 0xffff;
+ /* disable memory prefetch support */
+ tmp &= ~PCI_CB_BRIDGE_CTL_PREFETCH_MEM0;
+ tmp &= ~PCI_CB_BRIDGE_CTL_PREFETCH_MEM1;
+ fake_cb_bridge_regs.bridge_control = tmp;
+ break;
+
+ case (PCI_CB_MEMORY_BASE_0 >> 2):
+ fake_cb_bridge_regs.mem_base0 = data;
+ break;
+
+ case (PCI_CB_MEMORY_LIMIT_0 >> 2):
+ fake_cb_bridge_regs.mem_limit0 = data;
+ break;
+
+ case (PCI_CB_MEMORY_BASE_1 >> 2):
+ fake_cb_bridge_regs.mem_base1 = data;
+ break;
+
+ case (PCI_CB_MEMORY_LIMIT_1 >> 2):
+ fake_cb_bridge_regs.mem_limit1 = data;
+ break;
+
+ case (PCI_CB_IO_BASE_0 >> 2):
+ fake_cb_bridge_regs.io_base0 = data;
+ break;
+
+ case (PCI_CB_IO_LIMIT_0 >> 2):
+ fake_cb_bridge_regs.io_limit0 = data;
+ break;
+
+ case (PCI_CB_IO_BASE_1 >> 2):
+ fake_cb_bridge_regs.io_base1 = data;
+ break;
+
+ case (PCI_CB_IO_LIMIT_1 >> 2):
+ fake_cb_bridge_regs.io_limit1 = data;
+ break;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int bcm63xx_cb_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ /* snoop access to slot 0x1e on root bus, we fake a cardbus
+ * bridge at this location */
+ if (!bus->parent && PCI_SLOT(devfn) == FAKE_CB_BRIDGE_SLOT) {
+ fake_cb_bridge_bus_number = bus->number;
+ return fake_cb_bridge_read(where, size, val);
+ }
+
+ /* a configuration cycle for the device behind the cardbus
+ * bridge is actually done as a type 0 cycle on the primary
+ * bus. This means that only one device can be on the cardbus
+ * bus */
+ if (fake_cb_bridge_regs.bus_assigned &&
+ bus->number == fake_cb_bridge_regs.cardbus_busn &&
+ PCI_SLOT(devfn) == 0)
+ return bcm63xx_do_cfg_read(0, 0,
+ PCI_DEVFN(CARDBUS_PCI_IDSEL, 0),
+ where, size, val);
+
+ return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+static int bcm63xx_cb_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ if (!bus->parent && PCI_SLOT(devfn) == FAKE_CB_BRIDGE_SLOT) {
+ fake_cb_bridge_bus_number = bus->number;
+ return fake_cb_bridge_write(where, size, val);
+ }
+
+ if (fake_cb_bridge_regs.bus_assigned &&
+ bus->number == fake_cb_bridge_regs.cardbus_busn &&
+ PCI_SLOT(devfn) == 0)
+ return bcm63xx_do_cfg_write(0, 0,
+ PCI_DEVFN(CARDBUS_PCI_IDSEL, 0),
+ where, size, val);
+
+ return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+struct pci_ops bcm63xx_cb_ops = {
+ .read = bcm63xx_cb_read,
+ .write = bcm63xx_cb_write,
+};
+
+/*
+ * only one IO window, so it cannot be shared by PCI and cardbus, use
+ * fixup to choose and detect unhandled configuration
+ */
+static void bcm63xx_fixup(struct pci_dev *dev)
+{
+ static int io_window = -1;
+ int i, found, new_io_window;
+ u32 val;
+
+ /* look for any io resource */
+ found = 0;
+ for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+ if (pci_resource_flags(dev, i) & IORESOURCE_IO) {
+ found = 1;
+ break;
+ }
+ }
+
+ if (!found)
+ return;
+
+ /* skip our fake bus with only cardbus bridge on it */
+ if (dev->bus->number == fake_cb_bridge_bus_number)
+ return;
+
+ /* find on which bus the device is */
+ if (fake_cb_bridge_regs.bus_assigned &&
+ dev->bus->number == fake_cb_bridge_regs.cardbus_busn &&
+ PCI_SLOT(dev->devfn) == 0)
+ new_io_window = 1;
+ else
+ new_io_window = 0;
+
+ if (new_io_window == io_window)
+ return;
+
+ if (io_window != -1) {
+ printk(KERN_ERR "bcm63xx: both PCI and cardbus devices "
+ "need IO, which hardware cannot do\n");
+ return;
+ }
+
+ printk(KERN_INFO "bcm63xx: PCI IO window assigned to %s\n",
+ (new_io_window == 0) ? "PCI" : "cardbus");
+
+ val = bcm_mpi_readl(MPI_L2PIOREMAP_REG);
+ if (io_window)
+ val |= MPI_L2PREMAP_IS_CARDBUS_MASK;
+ else
+ val &= ~MPI_L2PREMAP_IS_CARDBUS_MASK;
+ bcm_mpi_writel(val, MPI_L2PIOREMAP_REG);
+
+ io_window = new_io_window;
+}
+
+DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, bcm63xx_fixup);
+#endif
diff --git a/arch/mips/pci/pci-bcm63xx.c b/arch/mips/pci/pci-bcm63xx.c
new file mode 100644
index 0000000..82e0fde
--- /dev/null
+++ b/arch/mips/pci/pci-bcm63xx.c
@@ -0,0 +1,224 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/bootinfo.h>
+
+#include "pci-bcm63xx.h"
+
+/*
+ * Allow PCI to be disabled at runtime depending on board nvram
+ * configuration
+ */
+int bcm63xx_pci_enabled;
+
+static struct resource bcm_pci_mem_resource = {
+ .name = "bcm63xx PCI memory space",
+ .start = BCM_PCI_MEM_BASE_PA,
+ .end = BCM_PCI_MEM_END_PA,
+ .flags = IORESOURCE_MEM
+};
+
+static struct resource bcm_pci_io_resource = {
+ .name = "bcm63xx PCI IO space",
+ .start = BCM_PCI_IO_BASE_PA,
+#ifdef CONFIG_CARDBUS
+ .end = BCM_PCI_IO_HALF_PA,
+#else
+ .end = BCM_PCI_IO_END_PA,
+#endif
+ .flags = IORESOURCE_IO
+};
+
+struct pci_controller bcm63xx_controller = {
+ .pci_ops = &bcm63xx_pci_ops,
+ .io_resource = &bcm_pci_io_resource,
+ .mem_resource = &bcm_pci_mem_resource,
+};
+
+/*
+ * We handle cardbus via a fake Cardbus bridge, memory and io spaces
+ * have to be clearly separated from PCI one since we have different
+ * memory decoder.
+ */
+#ifdef CONFIG_CARDBUS
+static struct resource bcm_cb_mem_resource = {
+ .name = "bcm63xx Cardbus memory space",
+ .start = BCM_CB_MEM_BASE_PA,
+ .end = BCM_CB_MEM_END_PA,
+ .flags = IORESOURCE_MEM
+};
+
+static struct resource bcm_cb_io_resource = {
+ .name = "bcm63xx Cardbus IO space",
+ .start = BCM_PCI_IO_HALF_PA + 1,
+ .end = BCM_PCI_IO_END_PA,
+ .flags = IORESOURCE_IO
+};
+
+struct pci_controller bcm63xx_cb_controller = {
+ .pci_ops = &bcm63xx_cb_ops,
+ .io_resource = &bcm_cb_io_resource,
+ .mem_resource = &bcm_cb_mem_resource,
+};
+#endif
+
+static u32 bcm63xx_int_cfg_readl(u32 reg)
+{
+ u32 tmp;
+
+ tmp = reg & MPI_PCICFGCTL_CFGADDR_MASK;
+ tmp |= MPI_PCICFGCTL_WRITEEN_MASK;
+ bcm_mpi_writel(tmp, MPI_PCICFGCTL_REG);
+ iob();
+ return bcm_mpi_readl(MPI_PCICFGDATA_REG);
+}
+
+static void bcm63xx_int_cfg_writel(u32 val, u32 reg)
+{
+ u32 tmp;
+
+ tmp = reg & MPI_PCICFGCTL_CFGADDR_MASK;
+ tmp |= MPI_PCICFGCTL_WRITEEN_MASK;
+ bcm_mpi_writel(tmp, MPI_PCICFGCTL_REG);
+ bcm_mpi_writel(val, MPI_PCICFGDATA_REG);
+}
+
+void __iomem *pci_iospace_start;
+
+static int __init bcm63xx_pci_init(void)
+{
+ unsigned int mem_size;
+ u32 val;
+
+ if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358())
+ return -ENODEV;
+
+ if (!bcm63xx_pci_enabled)
+ return -ENODEV;
+
+ /*
+ * configuration access are done through IO space, remap 4
+ * first bytes to access it from CPU.
+ *
+ * this means that no io access from CPU should happen while
+ * we do a configuration cycle, but there's no way we can add
+ * a spinlock for each io access, so this is currently kind of
+ * broken on SMP.
+ */
+ pci_iospace_start = ioremap_nocache(BCM_PCI_IO_BASE_PA, 4);
+ if (!pci_iospace_start)
+ return -ENOMEM;
+
+ /* setup local bus to PCI access (PCI memory) */
+ val = BCM_PCI_MEM_BASE_PA & MPI_L2P_BASE_MASK;
+ bcm_mpi_writel(val, MPI_L2PMEMBASE1_REG);
+ bcm_mpi_writel(~(BCM_PCI_MEM_SIZE - 1), MPI_L2PMEMRANGE1_REG);
+ bcm_mpi_writel(val | MPI_L2PREMAP_ENABLED_MASK, MPI_L2PMEMREMAP1_REG);
+
+ /* set Cardbus IDSEL (type 0 cfg access on primary bus for
+ * this IDSEL will be done on Cardbus instead) */
+ val = bcm_pcmcia_readl(PCMCIA_C1_REG);
+ val &= ~PCMCIA_C1_CBIDSEL_MASK;
+ val |= (CARDBUS_PCI_IDSEL << PCMCIA_C1_CBIDSEL_SHIFT);
+ bcm_pcmcia_writel(val, PCMCIA_C1_REG);
+
+#ifdef CONFIG_CARDBUS
+ /* setup local bus to PCI access (Cardbus memory) */
+ val = BCM_CB_MEM_BASE_PA & MPI_L2P_BASE_MASK;
+ bcm_mpi_writel(val, MPI_L2PMEMBASE2_REG);
+ bcm_mpi_writel(~(BCM_CB_MEM_SIZE - 1), MPI_L2PMEMRANGE2_REG);
+ val |= MPI_L2PREMAP_ENABLED_MASK | MPI_L2PREMAP_IS_CARDBUS_MASK;
+ bcm_mpi_writel(val, MPI_L2PMEMREMAP2_REG);
+#else
+ /* disable second access windows */
+ bcm_mpi_writel(0, MPI_L2PMEMREMAP2_REG);
+#endif
+
+ /* setup local bus to PCI access (IO memory), we have only 1
+ * IO window for both PCI and cardbus, but it cannot handle
+ * both at the same time, assume standard PCI for now, if
+ * cardbus card has IO zone, PCI fixup will change window to
+ * cardbus */
+ val = BCM_PCI_IO_BASE_PA & MPI_L2P_BASE_MASK;
+ bcm_mpi_writel(val, MPI_L2PIOBASE_REG);
+ bcm_mpi_writel(~(BCM_PCI_IO_SIZE - 1), MPI_L2PIORANGE_REG);
+ bcm_mpi_writel(val | MPI_L2PREMAP_ENABLED_MASK, MPI_L2PIOREMAP_REG);
+
+ /* enable PCI related GPIO pins */
+ bcm_mpi_writel(MPI_LOCBUSCTL_EN_PCI_GPIO_MASK, MPI_LOCBUSCTL_REG);
+
+ /* setup PCI to local bus access, used by PCI device to target
+ * local RAM while bus mastering */
+ bcm63xx_int_cfg_writel(0, PCI_BASE_ADDRESS_3);
+ if (BCMCPU_IS_6358())
+ val = MPI_SP0_REMAP_ENABLE_MASK;
+ else
+ val = 0;
+ bcm_mpi_writel(val, MPI_SP0_REMAP_REG);
+
+ bcm63xx_int_cfg_writel(0x0, PCI_BASE_ADDRESS_4);
+ bcm_mpi_writel(0, MPI_SP1_REMAP_REG);
+
+ mem_size = bcm63xx_get_memory_size();
+
+ /* 6348 before rev b0 exposes only 16 MB of RAM memory through
+ * PCI, throw a warning if we have more memory */
+ if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() & 0xf0) == 0xa0) {
+ if (mem_size > (16 * 1024 * 1024))
+ printk(KERN_WARNING "bcm63xx: this CPU "
+ "revision cannot handle more than 16MB "
+ "of RAM for PCI bus mastering\n");
+ } else {
+ /* setup sp0 range to local RAM size */
+ bcm_mpi_writel(~(mem_size - 1), MPI_SP0_RANGE_REG);
+ bcm_mpi_writel(0, MPI_SP1_RANGE_REG);
+ }
+
+ /* change host bridge retry counter to infinite number of
+ * retry, needed for some broadcom wifi cards with Silicon
+ * Backplane bus where access to srom seems very slow */
+ val = bcm63xx_int_cfg_readl(BCMPCI_REG_TIMERS);
+ val &= ~REG_TIMER_RETRY_MASK;
+ bcm63xx_int_cfg_writel(val, BCMPCI_REG_TIMERS);
+
+ /* enable memory decoder and bus mastering */
+ val = bcm63xx_int_cfg_readl(PCI_COMMAND);
+ val |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+ bcm63xx_int_cfg_writel(val, PCI_COMMAND);
+
+ /* enable read prefetching & disable byte swapping for bus
+ * mastering transfers */
+ val = bcm_mpi_readl(MPI_PCIMODESEL_REG);
+ val &= ~MPI_PCIMODESEL_BAR1_NOSWAP_MASK;
+ val &= ~MPI_PCIMODESEL_BAR2_NOSWAP_MASK;
+ val &= ~MPI_PCIMODESEL_PREFETCH_MASK;
+ val |= (8 << MPI_PCIMODESEL_PREFETCH_SHIFT);
+ bcm_mpi_writel(val, MPI_PCIMODESEL_REG);
+
+ /* enable pci interrupt */
+ val = bcm_mpi_readl(MPI_LOCINT_REG);
+ val |= MPI_LOCINT_MASK(MPI_LOCINT_EXT_PCI_INT);
+ bcm_mpi_writel(val, MPI_LOCINT_REG);
+
+ register_pci_controller(&bcm63xx_controller);
+
+#ifdef CONFIG_CARDBUS
+ register_pci_controller(&bcm63xx_cb_controller);
+#endif
+
+ /* mark memory space used for IO mapping as reserved */
+ request_mem_region(BCM_PCI_IO_BASE_PA, BCM_PCI_IO_SIZE,
+ "bcm63xx PCI IO space");
+ return 0;
+}
+
+arch_initcall(bcm63xx_pci_init);
diff --git a/arch/mips/pci/pci-bcm63xx.h b/arch/mips/pci/pci-bcm63xx.h
new file mode 100644
index 0000000..a6e594e
--- /dev/null
+++ b/arch/mips/pci/pci-bcm63xx.h
@@ -0,0 +1,27 @@
+#ifndef PCI_BCM63XX_H_
+#define PCI_BCM63XX_H_
+
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_dev_pci.h>
+
+/*
+ * Cardbus shares the PCI bus, but has no IDSEL, so a special id is
+ * reserved for it. If you have a standard PCI device at this id, you
+ * need to change the following definition.
+ */
+#define CARDBUS_PCI_IDSEL 0x8
+
+/*
+ * defined in ops-bcm63xx.c
+ */
+extern struct pci_ops bcm63xx_pci_ops;
+extern struct pci_ops bcm63xx_cb_ops;
+
+/*
+ * defined in pci-bcm63xx.c
+ */
+extern void __iomem *pci_iospace_start;
+
+#endif /* ! PCI_BCM63XX_H_ */