| /* |
| * LP5562 LED driver |
| * |
| * Copyright (C) 2013 Texas Instruments |
| * |
| * Author: Milo(Woogyom) Kim <milo.kim@ti.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/firmware.h> |
| #include <linux/i2c.h> |
| #include <linux/init.h> |
| #include <linux/leds.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/platform_data/leds-lp55xx.h> |
| #include <linux/slab.h> |
| |
| #include "leds-lp55xx-common.h" |
| |
| #define LP5562_PROGRAM_LENGTH 32 |
| #define LP5562_MAX_LEDS 4 |
| |
| /* ENABLE Register 00h */ |
| #define LP5562_REG_ENABLE 0x00 |
| #define LP5562_EXEC_ENG1_M 0x30 |
| #define LP5562_EXEC_ENG2_M 0x0C |
| #define LP5562_EXEC_ENG3_M 0x03 |
| #define LP5562_EXEC_M 0x3F |
| #define LP5562_MASTER_ENABLE 0x40 /* Chip master enable */ |
| #define LP5562_LOGARITHMIC_PWM 0x80 /* Logarithmic PWM adjustment */ |
| #define LP5562_EXEC_RUN 0x2A |
| #define LP5562_ENABLE_DEFAULT \ |
| (LP5562_MASTER_ENABLE | LP5562_LOGARITHMIC_PWM) |
| #define LP5562_ENABLE_RUN_PROGRAM \ |
| (LP5562_ENABLE_DEFAULT | LP5562_EXEC_RUN) |
| |
| /* OPMODE Register 01h */ |
| #define LP5562_REG_OP_MODE 0x01 |
| #define LP5562_MODE_ENG1_M 0x30 |
| #define LP5562_MODE_ENG2_M 0x0C |
| #define LP5562_MODE_ENG3_M 0x03 |
| #define LP5562_LOAD_ENG1 0x10 |
| #define LP5562_LOAD_ENG2 0x04 |
| #define LP5562_LOAD_ENG3 0x01 |
| #define LP5562_RUN_ENG1 0x20 |
| #define LP5562_RUN_ENG2 0x08 |
| #define LP5562_RUN_ENG3 0x02 |
| #define LP5562_ENG1_IS_LOADING(mode) \ |
| ((mode & LP5562_MODE_ENG1_M) == LP5562_LOAD_ENG1) |
| #define LP5562_ENG2_IS_LOADING(mode) \ |
| ((mode & LP5562_MODE_ENG2_M) == LP5562_LOAD_ENG2) |
| #define LP5562_ENG3_IS_LOADING(mode) \ |
| ((mode & LP5562_MODE_ENG3_M) == LP5562_LOAD_ENG3) |
| |
| /* BRIGHTNESS Registers */ |
| #define LP5562_REG_R_PWM 0x04 |
| #define LP5562_REG_G_PWM 0x03 |
| #define LP5562_REG_B_PWM 0x02 |
| #define LP5562_REG_W_PWM 0x0E |
| |
| /* CURRENT Registers */ |
| #define LP5562_REG_R_CURRENT 0x07 |
| #define LP5562_REG_G_CURRENT 0x06 |
| #define LP5562_REG_B_CURRENT 0x05 |
| #define LP5562_REG_W_CURRENT 0x0F |
| |
| /* CONFIG Register 08h */ |
| #define LP5562_REG_CONFIG 0x08 |
| #define LP5562_PWM_HF 0x40 |
| #define LP5562_PWRSAVE_EN 0x20 |
| #define LP5562_CLK_INT 0x01 /* Internal clock */ |
| #define LP5562_DEFAULT_CFG (LP5562_PWM_HF | LP5562_PWRSAVE_EN) |
| |
| /* RESET Register 0Dh */ |
| #define LP5562_REG_RESET 0x0D |
| #define LP5562_RESET 0xFF |
| |
| /* PROGRAM ENGINE Registers */ |
| #define LP5562_REG_PROG_MEM_ENG1 0x10 |
| #define LP5562_REG_PROG_MEM_ENG2 0x30 |
| #define LP5562_REG_PROG_MEM_ENG3 0x50 |
| |
| /* LEDMAP Register 70h */ |
| #define LP5562_REG_ENG_SEL 0x70 |
| #define LP5562_ENG_SEL_PWM 0 |
| #define LP5562_ENG_FOR_RGB_M 0x3F |
| #define LP5562_ENG_SEL_RGB 0x1B /* R:ENG1, G:ENG2, B:ENG3 */ |
| #define LP5562_ENG_FOR_W_M 0xC0 |
| #define LP5562_ENG1_FOR_W 0x40 /* W:ENG1 */ |
| #define LP5562_ENG2_FOR_W 0x80 /* W:ENG2 */ |
| #define LP5562_ENG3_FOR_W 0xC0 /* W:ENG3 */ |
| |
| /* Program Commands */ |
| #define LP5562_CMD_DISABLE 0x00 |
| #define LP5562_CMD_LOAD 0x15 |
| #define LP5562_CMD_RUN 0x2A |
| #define LP5562_CMD_DIRECT 0x3F |
| #define LP5562_PATTERN_OFF 0 |
| |
| static inline void lp5562_wait_opmode_done(void) |
| { |
| /* operation mode change needs to be longer than 153 us */ |
| usleep_range(200, 300); |
| } |
| |
| static inline void lp5562_wait_enable_done(void) |
| { |
| /* it takes more 488 us to update ENABLE register */ |
| usleep_range(500, 600); |
| } |
| |
| static void lp5562_set_led_current(struct lp55xx_led *led, u8 led_current) |
| { |
| u8 addr[] = { |
| LP5562_REG_R_CURRENT, |
| LP5562_REG_G_CURRENT, |
| LP5562_REG_B_CURRENT, |
| LP5562_REG_W_CURRENT, |
| }; |
| |
| led->led_current = led_current; |
| lp55xx_write(led->chip, addr[led->chan_nr], led_current); |
| } |
| |
| static void lp5562_load_engine(struct lp55xx_chip *chip) |
| { |
| enum lp55xx_engine_index idx = chip->engine_idx; |
| u8 mask[] = { |
| [LP55XX_ENGINE_1] = LP5562_MODE_ENG1_M, |
| [LP55XX_ENGINE_2] = LP5562_MODE_ENG2_M, |
| [LP55XX_ENGINE_3] = LP5562_MODE_ENG3_M, |
| }; |
| |
| u8 val[] = { |
| [LP55XX_ENGINE_1] = LP5562_LOAD_ENG1, |
| [LP55XX_ENGINE_2] = LP5562_LOAD_ENG2, |
| [LP55XX_ENGINE_3] = LP5562_LOAD_ENG3, |
| }; |
| |
| lp55xx_update_bits(chip, LP5562_REG_OP_MODE, mask[idx], val[idx]); |
| |
| lp5562_wait_opmode_done(); |
| } |
| |
| static void lp5562_stop_engine(struct lp55xx_chip *chip) |
| { |
| lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DISABLE); |
| lp5562_wait_opmode_done(); |
| } |
| |
| static void lp5562_run_engine(struct lp55xx_chip *chip, bool start) |
| { |
| int ret; |
| u8 mode; |
| u8 exec; |
| |
| /* stop engine */ |
| if (!start) { |
| lp55xx_write(chip, LP5562_REG_ENABLE, LP5562_ENABLE_DEFAULT); |
| lp5562_wait_enable_done(); |
| lp5562_stop_engine(chip); |
| lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_PWM); |
| lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DIRECT); |
| lp5562_wait_opmode_done(); |
| return; |
| } |
| |
| /* |
| * To run the engine, |
| * operation mode and enable register should updated at the same time |
| */ |
| |
| ret = lp55xx_read(chip, LP5562_REG_OP_MODE, &mode); |
| if (ret) |
| return; |
| |
| ret = lp55xx_read(chip, LP5562_REG_ENABLE, &exec); |
| if (ret) |
| return; |
| |
| /* change operation mode to RUN only when each engine is loading */ |
| if (LP5562_ENG1_IS_LOADING(mode)) { |
| mode = (mode & ~LP5562_MODE_ENG1_M) | LP5562_RUN_ENG1; |
| exec = (exec & ~LP5562_EXEC_ENG1_M) | LP5562_RUN_ENG1; |
| } |
| |
| if (LP5562_ENG2_IS_LOADING(mode)) { |
| mode = (mode & ~LP5562_MODE_ENG2_M) | LP5562_RUN_ENG2; |
| exec = (exec & ~LP5562_EXEC_ENG2_M) | LP5562_RUN_ENG2; |
| } |
| |
| if (LP5562_ENG3_IS_LOADING(mode)) { |
| mode = (mode & ~LP5562_MODE_ENG3_M) | LP5562_RUN_ENG3; |
| exec = (exec & ~LP5562_EXEC_ENG3_M) | LP5562_RUN_ENG3; |
| } |
| |
| lp55xx_write(chip, LP5562_REG_OP_MODE, mode); |
| lp5562_wait_opmode_done(); |
| |
| lp55xx_update_bits(chip, LP5562_REG_ENABLE, LP5562_EXEC_M, exec); |
| lp5562_wait_enable_done(); |
| } |
| |
| static int lp5562_update_firmware(struct lp55xx_chip *chip, |
| const u8 *data, size_t size) |
| { |
| enum lp55xx_engine_index idx = chip->engine_idx; |
| u8 pattern[LP5562_PROGRAM_LENGTH] = {0}; |
| u8 addr[] = { |
| [LP55XX_ENGINE_1] = LP5562_REG_PROG_MEM_ENG1, |
| [LP55XX_ENGINE_2] = LP5562_REG_PROG_MEM_ENG2, |
| [LP55XX_ENGINE_3] = LP5562_REG_PROG_MEM_ENG3, |
| }; |
| unsigned cmd; |
| char c[3]; |
| int program_size; |
| int nrchars; |
| int offset = 0; |
| int ret; |
| int i; |
| |
| /* clear program memory before updating */ |
| for (i = 0; i < LP5562_PROGRAM_LENGTH; i++) |
| lp55xx_write(chip, addr[idx] + i, 0); |
| |
| i = 0; |
| while ((offset < size - 1) && (i < LP5562_PROGRAM_LENGTH)) { |
| /* separate sscanfs because length is working only for %s */ |
| ret = sscanf(data + offset, "%2s%n ", c, &nrchars); |
| if (ret != 1) |
| goto err; |
| |
| ret = sscanf(c, "%2x", &cmd); |
| if (ret != 1) |
| goto err; |
| |
| pattern[i] = (u8)cmd; |
| offset += nrchars; |
| i++; |
| } |
| |
| /* Each instruction is 16bit long. Check that length is even */ |
| if (i % 2) |
| goto err; |
| |
| program_size = i; |
| for (i = 0; i < program_size; i++) |
| lp55xx_write(chip, addr[idx] + i, pattern[i]); |
| |
| return 0; |
| |
| err: |
| dev_err(&chip->cl->dev, "wrong pattern format\n"); |
| return -EINVAL; |
| } |
| |
| static void lp5562_firmware_loaded(struct lp55xx_chip *chip) |
| { |
| const struct firmware *fw = chip->fw; |
| |
| if (fw->size > LP5562_PROGRAM_LENGTH) { |
| dev_err(&chip->cl->dev, "firmware data size overflow: %zu\n", |
| fw->size); |
| return; |
| } |
| |
| /* |
| * Program momery sequence |
| * 1) set engine mode to "LOAD" |
| * 2) write firmware data into program memory |
| */ |
| |
| lp5562_load_engine(chip); |
| lp5562_update_firmware(chip, fw->data, fw->size); |
| } |
| |
| static int lp5562_post_init_device(struct lp55xx_chip *chip) |
| { |
| int ret; |
| u8 cfg = LP5562_DEFAULT_CFG; |
| |
| /* Set all PWMs to direct control mode */ |
| ret = lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DIRECT); |
| if (ret) |
| return ret; |
| |
| lp5562_wait_opmode_done(); |
| |
| /* Update configuration for the clock setting */ |
| if (!lp55xx_is_extclk_used(chip)) |
| cfg |= LP5562_CLK_INT; |
| |
| ret = lp55xx_write(chip, LP5562_REG_CONFIG, cfg); |
| if (ret) |
| return ret; |
| |
| /* Initialize all channels PWM to zero -> leds off */ |
| lp55xx_write(chip, LP5562_REG_R_PWM, 0); |
| lp55xx_write(chip, LP5562_REG_G_PWM, 0); |
| lp55xx_write(chip, LP5562_REG_B_PWM, 0); |
| lp55xx_write(chip, LP5562_REG_W_PWM, 0); |
| |
| /* Set LED map as register PWM by default */ |
| lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_PWM); |
| |
| return 0; |
| } |
| |
| static void lp5562_led_brightness_work(struct work_struct *work) |
| { |
| struct lp55xx_led *led = container_of(work, struct lp55xx_led, |
| brightness_work); |
| struct lp55xx_chip *chip = led->chip; |
| u8 addr[] = { |
| LP5562_REG_R_PWM, |
| LP5562_REG_G_PWM, |
| LP5562_REG_B_PWM, |
| LP5562_REG_W_PWM, |
| }; |
| |
| mutex_lock(&chip->lock); |
| lp55xx_write(chip, addr[led->chan_nr], led->brightness); |
| mutex_unlock(&chip->lock); |
| } |
| |
| static void lp5562_write_program_memory(struct lp55xx_chip *chip, |
| u8 base, const u8 *rgb, int size) |
| { |
| int i; |
| |
| if (!rgb || size <= 0) |
| return; |
| |
| for (i = 0; i < size; i++) |
| lp55xx_write(chip, base + i, *(rgb + i)); |
| |
| lp55xx_write(chip, base + i, 0); |
| lp55xx_write(chip, base + i + 1, 0); |
| } |
| |
| /* check the size of program count */ |
| static inline bool _is_pc_overflow(struct lp55xx_predef_pattern *ptn) |
| { |
| return (ptn->size_r >= LP5562_PROGRAM_LENGTH || |
| ptn->size_g >= LP5562_PROGRAM_LENGTH || |
| ptn->size_b >= LP5562_PROGRAM_LENGTH); |
| } |
| |
| static int lp5562_run_predef_led_pattern(struct lp55xx_chip *chip, int mode) |
| { |
| struct lp55xx_predef_pattern *ptn; |
| int i; |
| |
| if (mode == LP5562_PATTERN_OFF) { |
| lp5562_run_engine(chip, false); |
| return 0; |
| } |
| |
| ptn = chip->pdata->patterns + (mode - 1); |
| if (!ptn || _is_pc_overflow(ptn)) { |
| dev_err(&chip->cl->dev, "invalid pattern data\n"); |
| return -EINVAL; |
| } |
| |
| lp5562_stop_engine(chip); |
| |
| /* Set LED map as RGB */ |
| lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_RGB); |
| |
| /* Load engines */ |
| for (i = LP55XX_ENGINE_1; i <= LP55XX_ENGINE_3; i++) { |
| chip->engine_idx = i; |
| lp5562_load_engine(chip); |
| } |
| |
| /* Clear program registers */ |
| lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG1, 0); |
| lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG1 + 1, 0); |
| lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG2, 0); |
| lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG2 + 1, 0); |
| lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG3, 0); |
| lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG3 + 1, 0); |
| |
| /* Program engines */ |
| lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG1, |
| ptn->r, ptn->size_r); |
| lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG2, |
| ptn->g, ptn->size_g); |
| lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG3, |
| ptn->b, ptn->size_b); |
| |
| /* Run engines */ |
| lp5562_run_engine(chip, true); |
| |
| return 0; |
| } |
| |
| static ssize_t lp5562_store_pattern(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t len) |
| { |
| struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); |
| struct lp55xx_chip *chip = led->chip; |
| struct lp55xx_predef_pattern *ptn = chip->pdata->patterns; |
| int num_patterns = chip->pdata->num_patterns; |
| unsigned long mode; |
| int ret; |
| |
| ret = kstrtoul(buf, 0, &mode); |
| if (ret) |
| return ret; |
| |
| if (mode > num_patterns || !ptn) |
| return -EINVAL; |
| |
| mutex_lock(&chip->lock); |
| ret = lp5562_run_predef_led_pattern(chip, mode); |
| mutex_unlock(&chip->lock); |
| |
| if (ret) |
| return ret; |
| |
| return len; |
| } |
| |
| static ssize_t lp5562_store_engine_mux(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t len) |
| { |
| struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); |
| struct lp55xx_chip *chip = led->chip; |
| u8 mask; |
| u8 val; |
| |
| /* LED map |
| * R ... Engine 1 (fixed) |
| * G ... Engine 2 (fixed) |
| * B ... Engine 3 (fixed) |
| * W ... Engine 1 or 2 or 3 |
| */ |
| |
| if (sysfs_streq(buf, "RGB")) { |
| mask = LP5562_ENG_FOR_RGB_M; |
| val = LP5562_ENG_SEL_RGB; |
| } else if (sysfs_streq(buf, "W")) { |
| enum lp55xx_engine_index idx = chip->engine_idx; |
| |
| mask = LP5562_ENG_FOR_W_M; |
| switch (idx) { |
| case LP55XX_ENGINE_1: |
| val = LP5562_ENG1_FOR_W; |
| break; |
| case LP55XX_ENGINE_2: |
| val = LP5562_ENG2_FOR_W; |
| break; |
| case LP55XX_ENGINE_3: |
| val = LP5562_ENG3_FOR_W; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| } else { |
| dev_err(dev, "choose RGB or W\n"); |
| return -EINVAL; |
| } |
| |
| mutex_lock(&chip->lock); |
| lp55xx_update_bits(chip, LP5562_REG_ENG_SEL, mask, val); |
| mutex_unlock(&chip->lock); |
| |
| return len; |
| } |
| |
| static DEVICE_ATTR(led_pattern, S_IWUSR, NULL, lp5562_store_pattern); |
| static DEVICE_ATTR(engine_mux, S_IWUSR, NULL, lp5562_store_engine_mux); |
| |
| static struct attribute *lp5562_attributes[] = { |
| &dev_attr_led_pattern.attr, |
| &dev_attr_engine_mux.attr, |
| NULL, |
| }; |
| |
| static const struct attribute_group lp5562_group = { |
| .attrs = lp5562_attributes, |
| }; |
| |
| /* Chip specific configurations */ |
| static struct lp55xx_device_config lp5562_cfg = { |
| .max_channel = LP5562_MAX_LEDS, |
| .reset = { |
| .addr = LP5562_REG_RESET, |
| .val = LP5562_RESET, |
| }, |
| .enable = { |
| .addr = LP5562_REG_ENABLE, |
| .val = LP5562_ENABLE_DEFAULT, |
| }, |
| .post_init_device = lp5562_post_init_device, |
| .set_led_current = lp5562_set_led_current, |
| .brightness_work_fn = lp5562_led_brightness_work, |
| .run_engine = lp5562_run_engine, |
| .firmware_cb = lp5562_firmware_loaded, |
| .dev_attr_group = &lp5562_group, |
| }; |
| |
| static int lp5562_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| int ret; |
| struct lp55xx_chip *chip; |
| struct lp55xx_led *led; |
| struct lp55xx_platform_data *pdata; |
| struct device_node *np = client->dev.of_node; |
| |
| if (!client->dev.platform_data) { |
| if (np) { |
| ret = lp55xx_of_populate_pdata(&client->dev, np); |
| if (ret < 0) |
| return ret; |
| } else { |
| dev_err(&client->dev, "no platform data\n"); |
| return -EINVAL; |
| } |
| } |
| pdata = client->dev.platform_data; |
| |
| chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); |
| if (!chip) |
| return -ENOMEM; |
| |
| led = devm_kzalloc(&client->dev, |
| sizeof(*led) * pdata->num_channels, GFP_KERNEL); |
| if (!led) |
| return -ENOMEM; |
| |
| chip->cl = client; |
| chip->pdata = pdata; |
| chip->cfg = &lp5562_cfg; |
| |
| mutex_init(&chip->lock); |
| |
| i2c_set_clientdata(client, led); |
| |
| ret = lp55xx_init_device(chip); |
| if (ret) |
| goto err_init; |
| |
| ret = lp55xx_register_leds(led, chip); |
| if (ret) |
| goto err_register_leds; |
| |
| ret = lp55xx_register_sysfs(chip); |
| if (ret) { |
| dev_err(&client->dev, "registering sysfs failed\n"); |
| goto err_register_sysfs; |
| } |
| |
| return 0; |
| |
| err_register_sysfs: |
| lp55xx_unregister_leds(led, chip); |
| err_register_leds: |
| lp55xx_deinit_device(chip); |
| err_init: |
| return ret; |
| } |
| |
| static int lp5562_remove(struct i2c_client *client) |
| { |
| struct lp55xx_led *led = i2c_get_clientdata(client); |
| struct lp55xx_chip *chip = led->chip; |
| |
| lp5562_stop_engine(chip); |
| |
| lp55xx_unregister_sysfs(chip); |
| lp55xx_unregister_leds(led, chip); |
| lp55xx_deinit_device(chip); |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id lp5562_id[] = { |
| { "lp5562", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, lp5562_id); |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id of_lp5562_leds_match[] = { |
| { .compatible = "ti,lp5562", }, |
| {}, |
| }; |
| |
| MODULE_DEVICE_TABLE(of, of_lp5562_leds_match); |
| #endif |
| |
| static struct i2c_driver lp5562_driver = { |
| .driver = { |
| .name = "lp5562", |
| .of_match_table = of_match_ptr(of_lp5562_leds_match), |
| }, |
| .probe = lp5562_probe, |
| .remove = lp5562_remove, |
| .id_table = lp5562_id, |
| }; |
| |
| module_i2c_driver(lp5562_driver); |
| |
| MODULE_DESCRIPTION("Texas Instruments LP5562 LED Driver"); |
| MODULE_AUTHOR("Milo Kim"); |
| MODULE_LICENSE("GPL"); |