| /* |
| * Samsung's Exynos4 SoC series common device tree source |
| * |
| * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. |
| * http://www.samsung.com |
| * Copyright (c) 2010-2011 Linaro Ltd. |
| * www.linaro.org |
| * |
| * Samsung's Exynos4 SoC series device nodes are listed in this file. Particular |
| * SoCs from Exynos4 series can include this file and provide values for SoCs |
| * specfic bindings. |
| * |
| * Note: This file does not include device nodes for all the controllers in |
| * Exynos4 SoCs. As device tree coverage for Exynos4 increases, additional |
| * nodes can be added to this file. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <dt-bindings/clock/exynos4.h> |
| #include <dt-bindings/clock/exynos-audss-clk.h> |
| #include "skeleton.dtsi" |
| |
| / { |
| interrupt-parent = <&gic>; |
| |
| aliases { |
| spi0 = &spi_0; |
| spi1 = &spi_1; |
| spi2 = &spi_2; |
| i2c0 = &i2c_0; |
| i2c1 = &i2c_1; |
| i2c2 = &i2c_2; |
| i2c3 = &i2c_3; |
| i2c4 = &i2c_4; |
| i2c5 = &i2c_5; |
| i2c6 = &i2c_6; |
| i2c7 = &i2c_7; |
| csis0 = &csis_0; |
| csis1 = &csis_1; |
| fimc0 = &fimc_0; |
| fimc1 = &fimc_1; |
| fimc2 = &fimc_2; |
| fimc3 = &fimc_3; |
| serial0 = &serial_0; |
| serial1 = &serial_1; |
| serial2 = &serial_2; |
| serial3 = &serial_3; |
| }; |
| |
| clock_audss: clock-controller@03810000 { |
| compatible = "samsung,exynos4210-audss-clock"; |
| reg = <0x03810000 0x0C>; |
| #clock-cells = <1>; |
| }; |
| |
| i2s0: i2s@03830000 { |
| compatible = "samsung,s5pv210-i2s"; |
| reg = <0x03830000 0x100>; |
| clocks = <&clock_audss EXYNOS_I2S_BUS>; |
| clock-names = "iis"; |
| dmas = <&pdma0 12>, <&pdma0 11>, <&pdma0 10>; |
| dma-names = "tx", "rx", "tx-sec"; |
| samsung,idma-addr = <0x03000000>; |
| status = "disabled"; |
| }; |
| |
| chipid@10000000 { |
| compatible = "samsung,exynos4210-chipid"; |
| reg = <0x10000000 0x100>; |
| }; |
| |
| mipi_phy: video-phy@10020710 { |
| compatible = "samsung,s5pv210-mipi-video-phy"; |
| reg = <0x10020710 8>; |
| #phy-cells = <1>; |
| }; |
| |
| pd_mfc: mfc-power-domain@10023C40 { |
| compatible = "samsung,exynos4210-pd"; |
| reg = <0x10023C40 0x20>; |
| }; |
| |
| pd_g3d: g3d-power-domain@10023C60 { |
| compatible = "samsung,exynos4210-pd"; |
| reg = <0x10023C60 0x20>; |
| }; |
| |
| pd_lcd0: lcd0-power-domain@10023C80 { |
| compatible = "samsung,exynos4210-pd"; |
| reg = <0x10023C80 0x20>; |
| }; |
| |
| pd_tv: tv-power-domain@10023C20 { |
| compatible = "samsung,exynos4210-pd"; |
| reg = <0x10023C20 0x20>; |
| }; |
| |
| pd_cam: cam-power-domain@10023C00 { |
| compatible = "samsung,exynos4210-pd"; |
| reg = <0x10023C00 0x20>; |
| }; |
| |
| pd_gps: gps-power-domain@10023CE0 { |
| compatible = "samsung,exynos4210-pd"; |
| reg = <0x10023CE0 0x20>; |
| }; |
| |
| pd_gps_alive: gps-alive-power-domain@10023D00 { |
| compatible = "samsung,exynos4210-pd"; |
| reg = <0x10023D00 0x20>; |
| }; |
| |
| gic: interrupt-controller@10490000 { |
| compatible = "arm,cortex-a9-gic"; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| reg = <0x10490000 0x10000>, <0x10480000 0x10000>; |
| }; |
| |
| combiner: interrupt-controller@10440000 { |
| compatible = "samsung,exynos4210-combiner"; |
| #interrupt-cells = <2>; |
| interrupt-controller; |
| reg = <0x10440000 0x1000>; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a9-pmu"; |
| interrupt-parent = <&combiner>; |
| interrupts = <2 2>, <3 2>; |
| }; |
| |
| sys_reg: syscon@10010000 { |
| compatible = "samsung,exynos4-sysreg", "syscon"; |
| reg = <0x10010000 0x400>; |
| }; |
| |
| pmu_system_controller: system-controller@10020000 { |
| compatible = "samsung,exynos4210-pmu", "syscon"; |
| reg = <0x10020000 0x4000>; |
| }; |
| |
| dsi_0: dsi@11C80000 { |
| compatible = "samsung,exynos4210-mipi-dsi"; |
| reg = <0x11C80000 0x10000>; |
| interrupts = <0 79 0>; |
| samsung,power-domain = <&pd_lcd0>; |
| phys = <&mipi_phy 1>; |
| phy-names = "dsim"; |
| clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI0>; |
| clock-names = "bus_clk", "pll_clk"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| camera { |
| compatible = "samsung,fimc", "simple-bus"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| #clock-cells = <1>; |
| clock-output-names = "cam_a_clkout", "cam_b_clkout"; |
| ranges; |
| |
| fimc_0: fimc@11800000 { |
| compatible = "samsung,exynos4210-fimc"; |
| reg = <0x11800000 0x1000>; |
| interrupts = <0 84 0>; |
| clocks = <&clock CLK_FIMC0>, <&clock CLK_SCLK_FIMC0>; |
| clock-names = "fimc", "sclk_fimc"; |
| samsung,power-domain = <&pd_cam>; |
| samsung,sysreg = <&sys_reg>; |
| status = "disabled"; |
| }; |
| |
| fimc_1: fimc@11810000 { |
| compatible = "samsung,exynos4210-fimc"; |
| reg = <0x11810000 0x1000>; |
| interrupts = <0 85 0>; |
| clocks = <&clock CLK_FIMC1>, <&clock CLK_SCLK_FIMC1>; |
| clock-names = "fimc", "sclk_fimc"; |
| samsung,power-domain = <&pd_cam>; |
| samsung,sysreg = <&sys_reg>; |
| status = "disabled"; |
| }; |
| |
| fimc_2: fimc@11820000 { |
| compatible = "samsung,exynos4210-fimc"; |
| reg = <0x11820000 0x1000>; |
| interrupts = <0 86 0>; |
| clocks = <&clock CLK_FIMC2>, <&clock CLK_SCLK_FIMC2>; |
| clock-names = "fimc", "sclk_fimc"; |
| samsung,power-domain = <&pd_cam>; |
| samsung,sysreg = <&sys_reg>; |
| status = "disabled"; |
| }; |
| |
| fimc_3: fimc@11830000 { |
| compatible = "samsung,exynos4210-fimc"; |
| reg = <0x11830000 0x1000>; |
| interrupts = <0 87 0>; |
| clocks = <&clock CLK_FIMC3>, <&clock CLK_SCLK_FIMC3>; |
| clock-names = "fimc", "sclk_fimc"; |
| samsung,power-domain = <&pd_cam>; |
| samsung,sysreg = <&sys_reg>; |
| status = "disabled"; |
| }; |
| |
| csis_0: csis@11880000 { |
| compatible = "samsung,exynos4210-csis"; |
| reg = <0x11880000 0x4000>; |
| interrupts = <0 78 0>; |
| clocks = <&clock CLK_CSIS0>, <&clock CLK_SCLK_CSIS0>; |
| clock-names = "csis", "sclk_csis"; |
| bus-width = <4>; |
| samsung,power-domain = <&pd_cam>; |
| phys = <&mipi_phy 0>; |
| phy-names = "csis"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| csis_1: csis@11890000 { |
| compatible = "samsung,exynos4210-csis"; |
| reg = <0x11890000 0x4000>; |
| interrupts = <0 80 0>; |
| clocks = <&clock CLK_CSIS1>, <&clock CLK_SCLK_CSIS1>; |
| clock-names = "csis", "sclk_csis"; |
| bus-width = <2>; |
| samsung,power-domain = <&pd_cam>; |
| phys = <&mipi_phy 2>; |
| phy-names = "csis"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| }; |
| |
| watchdog@10060000 { |
| compatible = "samsung,s3c2410-wdt"; |
| reg = <0x10060000 0x100>; |
| interrupts = <0 43 0>; |
| clocks = <&clock CLK_WDT>; |
| clock-names = "watchdog"; |
| status = "disabled"; |
| }; |
| |
| rtc@10070000 { |
| compatible = "samsung,s3c6410-rtc"; |
| reg = <0x10070000 0x100>; |
| interrupts = <0 44 0>, <0 45 0>; |
| clocks = <&clock CLK_RTC>; |
| clock-names = "rtc"; |
| status = "disabled"; |
| }; |
| |
| keypad@100A0000 { |
| compatible = "samsung,s5pv210-keypad"; |
| reg = <0x100A0000 0x100>; |
| interrupts = <0 109 0>; |
| clocks = <&clock CLK_KEYIF>; |
| clock-names = "keypad"; |
| status = "disabled"; |
| }; |
| |
| sdhci@12510000 { |
| compatible = "samsung,exynos4210-sdhci"; |
| reg = <0x12510000 0x100>; |
| interrupts = <0 73 0>; |
| clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>; |
| clock-names = "hsmmc", "mmc_busclk.2"; |
| status = "disabled"; |
| }; |
| |
| sdhci@12520000 { |
| compatible = "samsung,exynos4210-sdhci"; |
| reg = <0x12520000 0x100>; |
| interrupts = <0 74 0>; |
| clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>; |
| clock-names = "hsmmc", "mmc_busclk.2"; |
| status = "disabled"; |
| }; |
| |
| sdhci@12530000 { |
| compatible = "samsung,exynos4210-sdhci"; |
| reg = <0x12530000 0x100>; |
| interrupts = <0 75 0>; |
| clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>; |
| clock-names = "hsmmc", "mmc_busclk.2"; |
| status = "disabled"; |
| }; |
| |
| sdhci@12540000 { |
| compatible = "samsung,exynos4210-sdhci"; |
| reg = <0x12540000 0x100>; |
| interrupts = <0 76 0>; |
| clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>; |
| clock-names = "hsmmc", "mmc_busclk.2"; |
| status = "disabled"; |
| }; |
| |
| exynos_usbphy: exynos-usbphy@125B0000 { |
| compatible = "samsung,exynos4210-usb2-phy"; |
| reg = <0x125B0000 0x100>; |
| samsung,pmureg-phandle = <&pmu_system_controller>; |
| clocks = <&clock CLK_USB_DEVICE>, <&clock CLK_XUSBXTI>; |
| clock-names = "phy", "ref"; |
| #phy-cells = <1>; |
| status = "disabled"; |
| }; |
| |
| hsotg@12480000 { |
| compatible = "samsung,s3c6400-hsotg"; |
| reg = <0x12480000 0x20000>; |
| interrupts = <0 71 0>; |
| clocks = <&clock CLK_USB_DEVICE>; |
| clock-names = "otg"; |
| phys = <&exynos_usbphy 0>; |
| phy-names = "usb2-phy"; |
| status = "disabled"; |
| }; |
| |
| ehci@12580000 { |
| compatible = "samsung,exynos4210-ehci"; |
| reg = <0x12580000 0x100>; |
| interrupts = <0 70 0>; |
| clocks = <&clock CLK_USB_HOST>; |
| clock-names = "usbhost"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| port@0 { |
| reg = <0>; |
| phys = <&exynos_usbphy 1>; |
| status = "disabled"; |
| }; |
| port@1 { |
| reg = <1>; |
| phys = <&exynos_usbphy 2>; |
| status = "disabled"; |
| }; |
| port@2 { |
| reg = <2>; |
| phys = <&exynos_usbphy 3>; |
| status = "disabled"; |
| }; |
| }; |
| |
| ohci@12590000 { |
| compatible = "samsung,exynos4210-ohci"; |
| reg = <0x12590000 0x100>; |
| interrupts = <0 70 0>; |
| clocks = <&clock CLK_USB_HOST>; |
| clock-names = "usbhost"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| port@0 { |
| reg = <0>; |
| phys = <&exynos_usbphy 1>; |
| status = "disabled"; |
| }; |
| }; |
| |
| i2s1: i2s@13960000 { |
| compatible = "samsung,s5pv210-i2s"; |
| reg = <0x13960000 0x100>; |
| clocks = <&clock CLK_I2S1>; |
| clock-names = "iis"; |
| dmas = <&pdma1 12>, <&pdma1 11>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| i2s2: i2s@13970000 { |
| compatible = "samsung,s5pv210-i2s"; |
| reg = <0x13970000 0x100>; |
| clocks = <&clock CLK_I2S2>; |
| clock-names = "iis"; |
| dmas = <&pdma0 14>, <&pdma0 13>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| mfc: codec@13400000 { |
| compatible = "samsung,mfc-v5"; |
| reg = <0x13400000 0x10000>; |
| interrupts = <0 94 0>; |
| samsung,power-domain = <&pd_mfc>; |
| clocks = <&clock CLK_MFC>, <&clock CLK_SCLK_MFC>; |
| clock-names = "mfc", "sclk_mfc"; |
| status = "disabled"; |
| }; |
| |
| serial_0: serial@13800000 { |
| compatible = "samsung,exynos4210-uart"; |
| reg = <0x13800000 0x100>; |
| interrupts = <0 52 0>; |
| clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; |
| clock-names = "uart", "clk_uart_baud0"; |
| status = "disabled"; |
| }; |
| |
| serial_1: serial@13810000 { |
| compatible = "samsung,exynos4210-uart"; |
| reg = <0x13810000 0x100>; |
| interrupts = <0 53 0>; |
| clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; |
| clock-names = "uart", "clk_uart_baud0"; |
| status = "disabled"; |
| }; |
| |
| serial_2: serial@13820000 { |
| compatible = "samsung,exynos4210-uart"; |
| reg = <0x13820000 0x100>; |
| interrupts = <0 54 0>; |
| clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; |
| clock-names = "uart", "clk_uart_baud0"; |
| status = "disabled"; |
| }; |
| |
| serial_3: serial@13830000 { |
| compatible = "samsung,exynos4210-uart"; |
| reg = <0x13830000 0x100>; |
| interrupts = <0 55 0>; |
| clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; |
| clock-names = "uart", "clk_uart_baud0"; |
| status = "disabled"; |
| }; |
| |
| i2c_0: i2c@13860000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "samsung,s3c2440-i2c"; |
| reg = <0x13860000 0x100>; |
| interrupts = <0 58 0>; |
| clocks = <&clock CLK_I2C0>; |
| clock-names = "i2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c0_bus>; |
| status = "disabled"; |
| }; |
| |
| i2c_1: i2c@13870000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "samsung,s3c2440-i2c"; |
| reg = <0x13870000 0x100>; |
| interrupts = <0 59 0>; |
| clocks = <&clock CLK_I2C1>; |
| clock-names = "i2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c1_bus>; |
| status = "disabled"; |
| }; |
| |
| i2c_2: i2c@13880000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "samsung,s3c2440-i2c"; |
| reg = <0x13880000 0x100>; |
| interrupts = <0 60 0>; |
| clocks = <&clock CLK_I2C2>; |
| clock-names = "i2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c2_bus>; |
| status = "disabled"; |
| }; |
| |
| i2c_3: i2c@13890000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "samsung,s3c2440-i2c"; |
| reg = <0x13890000 0x100>; |
| interrupts = <0 61 0>; |
| clocks = <&clock CLK_I2C3>; |
| clock-names = "i2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c3_bus>; |
| status = "disabled"; |
| }; |
| |
| i2c_4: i2c@138A0000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "samsung,s3c2440-i2c"; |
| reg = <0x138A0000 0x100>; |
| interrupts = <0 62 0>; |
| clocks = <&clock CLK_I2C4>; |
| clock-names = "i2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c4_bus>; |
| status = "disabled"; |
| }; |
| |
| i2c_5: i2c@138B0000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "samsung,s3c2440-i2c"; |
| reg = <0x138B0000 0x100>; |
| interrupts = <0 63 0>; |
| clocks = <&clock CLK_I2C5>; |
| clock-names = "i2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c5_bus>; |
| status = "disabled"; |
| }; |
| |
| i2c_6: i2c@138C0000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "samsung,s3c2440-i2c"; |
| reg = <0x138C0000 0x100>; |
| interrupts = <0 64 0>; |
| clocks = <&clock CLK_I2C6>; |
| clock-names = "i2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c6_bus>; |
| status = "disabled"; |
| }; |
| |
| i2c_7: i2c@138D0000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "samsung,s3c2440-i2c"; |
| reg = <0x138D0000 0x100>; |
| interrupts = <0 65 0>; |
| clocks = <&clock CLK_I2C7>; |
| clock-names = "i2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c7_bus>; |
| status = "disabled"; |
| }; |
| |
| spi_0: spi@13920000 { |
| compatible = "samsung,exynos4210-spi"; |
| reg = <0x13920000 0x100>; |
| interrupts = <0 66 0>; |
| dmas = <&pdma0 7>, <&pdma0 6>; |
| dma-names = "tx", "rx"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>; |
| clock-names = "spi", "spi_busclk0"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi0_bus>; |
| status = "disabled"; |
| }; |
| |
| spi_1: spi@13930000 { |
| compatible = "samsung,exynos4210-spi"; |
| reg = <0x13930000 0x100>; |
| interrupts = <0 67 0>; |
| dmas = <&pdma1 7>, <&pdma1 6>; |
| dma-names = "tx", "rx"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>; |
| clock-names = "spi", "spi_busclk0"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi1_bus>; |
| status = "disabled"; |
| }; |
| |
| spi_2: spi@13940000 { |
| compatible = "samsung,exynos4210-spi"; |
| reg = <0x13940000 0x100>; |
| interrupts = <0 68 0>; |
| dmas = <&pdma0 9>, <&pdma0 8>; |
| dma-names = "tx", "rx"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>; |
| clock-names = "spi", "spi_busclk0"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi2_bus>; |
| status = "disabled"; |
| }; |
| |
| pwm@139D0000 { |
| compatible = "samsung,exynos4210-pwm"; |
| reg = <0x139D0000 0x1000>; |
| interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>; |
| clocks = <&clock CLK_PWM>; |
| clock-names = "timers"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| amba { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "arm,amba-bus"; |
| interrupt-parent = <&gic>; |
| ranges; |
| |
| pdma0: pdma@12680000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x12680000 0x1000>; |
| interrupts = <0 35 0>; |
| clocks = <&clock CLK_PDMA0>; |
| clock-names = "apb_pclk"; |
| #dma-cells = <1>; |
| #dma-channels = <8>; |
| #dma-requests = <32>; |
| }; |
| |
| pdma1: pdma@12690000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x12690000 0x1000>; |
| interrupts = <0 36 0>; |
| clocks = <&clock CLK_PDMA1>; |
| clock-names = "apb_pclk"; |
| #dma-cells = <1>; |
| #dma-channels = <8>; |
| #dma-requests = <32>; |
| }; |
| |
| mdma1: mdma@12850000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x12850000 0x1000>; |
| interrupts = <0 34 0>; |
| clocks = <&clock CLK_MDMA>; |
| clock-names = "apb_pclk"; |
| #dma-cells = <1>; |
| #dma-channels = <8>; |
| #dma-requests = <1>; |
| }; |
| }; |
| |
| fimd: fimd@11c00000 { |
| compatible = "samsung,exynos4210-fimd"; |
| interrupt-parent = <&combiner>; |
| reg = <0x11c00000 0x20000>; |
| interrupt-names = "fifo", "vsync", "lcd_sys"; |
| interrupts = <11 0>, <11 1>, <11 2>; |
| clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>; |
| clock-names = "sclk_fimd", "fimd"; |
| samsung,power-domain = <&pd_lcd0>; |
| samsung,sysreg = <&sys_reg>; |
| status = "disabled"; |
| }; |
| }; |