| /* |
| * MIPI DSI Bus |
| * |
| * Copyright (C) 2012-2013, Samsung Electronics, Co., Ltd. |
| * Andrzej Hajda <a.hajda@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #ifndef __DRM_MIPI_DSI_H__ |
| #define __DRM_MIPI_DSI_H__ |
| |
| #include <linux/device.h> |
| |
| struct mipi_dsi_host; |
| struct mipi_dsi_device; |
| |
| /* request ACK from peripheral */ |
| #define MIPI_DSI_MSG_REQ_ACK BIT(0) |
| /* use Low Power Mode to transmit message */ |
| #define MIPI_DSI_MSG_USE_LPM BIT(1) |
| |
| /** |
| * struct mipi_dsi_msg - read/write DSI buffer |
| * @channel: virtual channel id |
| * @type: payload data type |
| * @flags: flags controlling this message transmission |
| * @tx_len: length of @tx_buf |
| * @tx_buf: data to be written |
| * @rx_len: length of @rx_buf |
| * @rx_buf: data to be read, or NULL |
| */ |
| struct mipi_dsi_msg { |
| u8 channel; |
| u8 type; |
| u16 flags; |
| |
| size_t tx_len; |
| const void *tx_buf; |
| |
| size_t rx_len; |
| void *rx_buf; |
| }; |
| |
| bool mipi_dsi_packet_format_is_short(u8 type); |
| bool mipi_dsi_packet_format_is_long(u8 type); |
| |
| /** |
| * struct mipi_dsi_packet - represents a MIPI DSI packet in protocol format |
| * @size: size (in bytes) of the packet |
| * @header: the four bytes that make up the header (Data ID, Word Count or |
| * Packet Data, and ECC) |
| * @payload_length: number of bytes in the payload |
| * @payload: a pointer to a buffer containing the payload, if any |
| */ |
| struct mipi_dsi_packet { |
| size_t size; |
| u8 header[4]; |
| size_t payload_length; |
| const u8 *payload; |
| }; |
| |
| int mipi_dsi_create_packet(struct mipi_dsi_packet *packet, |
| const struct mipi_dsi_msg *msg); |
| |
| /** |
| * struct mipi_dsi_host_ops - DSI bus operations |
| * @attach: attach DSI device to DSI host |
| * @detach: detach DSI device from DSI host |
| * @transfer: transmit a DSI packet |
| * |
| * DSI packets transmitted by .transfer() are passed in as mipi_dsi_msg |
| * structures. This structure contains information about the type of packet |
| * being transmitted as well as the transmit and receive buffers. When an |
| * error is encountered during transmission, this function will return a |
| * negative error code. On success it shall return the number of bytes |
| * transmitted for write packets or the number of bytes received for read |
| * packets. |
| * |
| * Note that typically DSI packet transmission is atomic, so the .transfer() |
| * function will seldomly return anything other than the number of bytes |
| * contained in the transmit buffer on success. |
| */ |
| struct mipi_dsi_host_ops { |
| int (*attach)(struct mipi_dsi_host *host, |
| struct mipi_dsi_device *dsi); |
| int (*detach)(struct mipi_dsi_host *host, |
| struct mipi_dsi_device *dsi); |
| ssize_t (*transfer)(struct mipi_dsi_host *host, |
| const struct mipi_dsi_msg *msg); |
| }; |
| |
| /** |
| * struct mipi_dsi_host - DSI host device |
| * @dev: driver model device node for this DSI host |
| * @ops: DSI host operations |
| */ |
| struct mipi_dsi_host { |
| struct device *dev; |
| const struct mipi_dsi_host_ops *ops; |
| }; |
| |
| int mipi_dsi_host_register(struct mipi_dsi_host *host); |
| void mipi_dsi_host_unregister(struct mipi_dsi_host *host); |
| |
| /* DSI mode flags */ |
| |
| /* video mode */ |
| #define MIPI_DSI_MODE_VIDEO BIT(0) |
| /* video burst mode */ |
| #define MIPI_DSI_MODE_VIDEO_BURST BIT(1) |
| /* video pulse mode */ |
| #define MIPI_DSI_MODE_VIDEO_SYNC_PULSE BIT(2) |
| /* enable auto vertical count mode */ |
| #define MIPI_DSI_MODE_VIDEO_AUTO_VERT BIT(3) |
| /* enable hsync-end packets in vsync-pulse and v-porch area */ |
| #define MIPI_DSI_MODE_VIDEO_HSE BIT(4) |
| /* disable hfront-porch area */ |
| #define MIPI_DSI_MODE_VIDEO_HFP BIT(5) |
| /* disable hback-porch area */ |
| #define MIPI_DSI_MODE_VIDEO_HBP BIT(6) |
| /* disable hsync-active area */ |
| #define MIPI_DSI_MODE_VIDEO_HSA BIT(7) |
| /* flush display FIFO on vsync pulse */ |
| #define MIPI_DSI_MODE_VSYNC_FLUSH BIT(8) |
| /* disable EoT packets in HS mode */ |
| #define MIPI_DSI_MODE_EOT_PACKET BIT(9) |
| /* device supports non-continuous clock behavior (DSI spec 5.6.1) */ |
| #define MIPI_DSI_CLOCK_NON_CONTINUOUS BIT(10) |
| /* transmit data in low power */ |
| #define MIPI_DSI_MODE_LPM BIT(11) |
| |
| enum mipi_dsi_pixel_format { |
| MIPI_DSI_FMT_RGB888, |
| MIPI_DSI_FMT_RGB666, |
| MIPI_DSI_FMT_RGB666_PACKED, |
| MIPI_DSI_FMT_RGB565, |
| }; |
| |
| /** |
| * struct mipi_dsi_device - DSI peripheral device |
| * @host: DSI host for this peripheral |
| * @dev: driver model device node for this peripheral |
| * @channel: virtual channel assigned to the peripheral |
| * @format: pixel format for video mode |
| * @lanes: number of active data lanes |
| * @mode_flags: DSI operation mode related flags |
| */ |
| struct mipi_dsi_device { |
| struct mipi_dsi_host *host; |
| struct device dev; |
| |
| unsigned int channel; |
| unsigned int lanes; |
| enum mipi_dsi_pixel_format format; |
| unsigned long mode_flags; |
| }; |
| |
| static inline struct mipi_dsi_device *to_mipi_dsi_device(struct device *dev) |
| { |
| return container_of(dev, struct mipi_dsi_device, dev); |
| } |
| |
| /** |
| * mipi_dsi_pixel_format_to_bpp - obtain the number of bits per pixel for any |
| * given pixel format defined by the MIPI DSI |
| * specification |
| * @fmt: MIPI DSI pixel format |
| * |
| * Returns: The number of bits per pixel of the given pixel format. |
| */ |
| static inline int mipi_dsi_pixel_format_to_bpp(enum mipi_dsi_pixel_format fmt) |
| { |
| switch (fmt) { |
| case MIPI_DSI_FMT_RGB888: |
| case MIPI_DSI_FMT_RGB666: |
| return 24; |
| |
| case MIPI_DSI_FMT_RGB666_PACKED: |
| return 18; |
| |
| case MIPI_DSI_FMT_RGB565: |
| return 16; |
| } |
| |
| return -EINVAL; |
| } |
| |
| struct mipi_dsi_device *of_find_mipi_dsi_device_by_node(struct device_node *np); |
| int mipi_dsi_attach(struct mipi_dsi_device *dsi); |
| int mipi_dsi_detach(struct mipi_dsi_device *dsi); |
| int mipi_dsi_shutdown_peripheral(struct mipi_dsi_device *dsi); |
| int mipi_dsi_turn_on_peripheral(struct mipi_dsi_device *dsi); |
| int mipi_dsi_set_maximum_return_packet_size(struct mipi_dsi_device *dsi, |
| u16 value); |
| |
| ssize_t mipi_dsi_generic_write(struct mipi_dsi_device *dsi, const void *payload, |
| size_t size); |
| ssize_t mipi_dsi_generic_read(struct mipi_dsi_device *dsi, const void *params, |
| size_t num_params, void *data, size_t size); |
| |
| /** |
| * enum mipi_dsi_dcs_tear_mode - Tearing Effect Output Line mode |
| * @MIPI_DSI_DCS_TEAR_MODE_VBLANK: the TE output line consists of V-Blanking |
| * information only |
| * @MIPI_DSI_DCS_TEAR_MODE_VHBLANK : the TE output line consists of both |
| * V-Blanking and H-Blanking information |
| */ |
| enum mipi_dsi_dcs_tear_mode { |
| MIPI_DSI_DCS_TEAR_MODE_VBLANK, |
| MIPI_DSI_DCS_TEAR_MODE_VHBLANK, |
| }; |
| |
| #define MIPI_DSI_DCS_POWER_MODE_DISPLAY (1 << 2) |
| #define MIPI_DSI_DCS_POWER_MODE_NORMAL (1 << 3) |
| #define MIPI_DSI_DCS_POWER_MODE_SLEEP (1 << 4) |
| #define MIPI_DSI_DCS_POWER_MODE_PARTIAL (1 << 5) |
| #define MIPI_DSI_DCS_POWER_MODE_IDLE (1 << 6) |
| |
| ssize_t mipi_dsi_dcs_write_buffer(struct mipi_dsi_device *dsi, |
| const void *data, size_t len); |
| ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, u8 cmd, |
| const void *data, size_t len); |
| ssize_t mipi_dsi_dcs_read(struct mipi_dsi_device *dsi, u8 cmd, void *data, |
| size_t len); |
| int mipi_dsi_dcs_nop(struct mipi_dsi_device *dsi); |
| int mipi_dsi_dcs_soft_reset(struct mipi_dsi_device *dsi); |
| int mipi_dsi_dcs_get_power_mode(struct mipi_dsi_device *dsi, u8 *mode); |
| int mipi_dsi_dcs_get_pixel_format(struct mipi_dsi_device *dsi, u8 *format); |
| int mipi_dsi_dcs_enter_sleep_mode(struct mipi_dsi_device *dsi); |
| int mipi_dsi_dcs_exit_sleep_mode(struct mipi_dsi_device *dsi); |
| int mipi_dsi_dcs_set_display_off(struct mipi_dsi_device *dsi); |
| int mipi_dsi_dcs_set_display_on(struct mipi_dsi_device *dsi); |
| int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start, |
| u16 end); |
| int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start, |
| u16 end); |
| int mipi_dsi_dcs_set_tear_off(struct mipi_dsi_device *dsi); |
| int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi, |
| enum mipi_dsi_dcs_tear_mode mode); |
| int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format); |
| |
| /** |
| * struct mipi_dsi_driver - DSI driver |
| * @driver: device driver model driver |
| * @probe: callback for device binding |
| * @remove: callback for device unbinding |
| * @shutdown: called at shutdown time to quiesce the device |
| */ |
| struct mipi_dsi_driver { |
| struct device_driver driver; |
| int(*probe)(struct mipi_dsi_device *dsi); |
| int(*remove)(struct mipi_dsi_device *dsi); |
| void (*shutdown)(struct mipi_dsi_device *dsi); |
| }; |
| |
| static inline struct mipi_dsi_driver * |
| to_mipi_dsi_driver(struct device_driver *driver) |
| { |
| return container_of(driver, struct mipi_dsi_driver, driver); |
| } |
| |
| static inline void *mipi_dsi_get_drvdata(const struct mipi_dsi_device *dsi) |
| { |
| return dev_get_drvdata(&dsi->dev); |
| } |
| |
| static inline void mipi_dsi_set_drvdata(struct mipi_dsi_device *dsi, void *data) |
| { |
| dev_set_drvdata(&dsi->dev, data); |
| } |
| |
| int mipi_dsi_driver_register_full(struct mipi_dsi_driver *driver, |
| struct module *owner); |
| void mipi_dsi_driver_unregister(struct mipi_dsi_driver *driver); |
| |
| #define mipi_dsi_driver_register(driver) \ |
| mipi_dsi_driver_register_full(driver, THIS_MODULE) |
| |
| #define module_mipi_dsi_driver(__mipi_dsi_driver) \ |
| module_driver(__mipi_dsi_driver, mipi_dsi_driver_register, \ |
| mipi_dsi_driver_unregister) |
| |
| #endif /* __DRM_MIPI_DSI__ */ |