[NET] smc91x: Make smc91x use IRQ resource trigger flags
smc91x is shared between many different platforms. Each platform needs
to specify the interrupt type, and in some cases the irq type depends
on more than just the build configuration - it depends on runtime
checks.
Rather than throwing this code into the SMC_IRQ_FLAGS definition, provide
a way for these flags to be passed via the IRQ resource itself.
Note that IRQF_TRIGGER_* constants are intentionally defined to correspond
with the IORESOURCE_IRQ_* interrupt type flags, in much the same way that
the low bits of PCI iomem resources correspond with the BAR flag bits.
Also provide a way to configure smc91x to read the IRQ flags from the
resource. Once all platforms have been converted over (signified
by all definitions of SMC_IRQ_FLAGS being -1) SMC_IRQ_FLAGS should
be removed.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Nicolas Pitre <nico@cam.org>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 07b7f71..1d97eae 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -54,6 +54,7 @@
#define SMC_outw(v, a, r) writew(v, (a) + (r))
#define SMC_insw(a, r, p, l) readsw((a) + (r), p, l)
#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l)
+#define SMC_IRQ_FLAGS (-1) /* from resource */
#elif defined(CONFIG_BLACKFIN)
@@ -158,7 +159,7 @@
#define SMC_outw(v, a, r) writew(v, (a) + (r))
#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l)
-#define SMC_IRQ_FLAGS (0)
+#define SMC_IRQ_FLAGS (-1)
#elif defined(CONFIG_SA1100_ASSABET)
@@ -177,6 +178,7 @@
#define SMC_outb(v, a, r) writeb(v, (a) + (r))
#define SMC_insb(a, r, p, l) readsb((a) + (r), p, (l))
#define SMC_outsb(a, r, p, l) writesb((a) + (r), p, (l))
+#define SMC_IRQ_FLAGS (-1) /* from resource */
#elif defined(CONFIG_MACH_LOGICPD_PXA270)
@@ -210,6 +212,7 @@
#define SMC_outl(v, a, r) writel(v, (a) + (r))
#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l)
#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l)
+#define SMC_IRQ_FLAGS (-1) /* from resource */
/* We actually can't write halfwords properly if not word aligned */
static inline void
@@ -238,6 +241,7 @@
#define SMC_outsw(a, r, p, l) outsw((a) + (r), p, l)
#define SMC_outb(v, a, r) writeb(v, (a) + (r))
#define SMC_outw(v, a, r) writew(v, (a) + (r))
+#define SMC_IRQ_FLAGS (-1) /* from resource */
#elif defined(CONFIG_ARCH_OMAP)
@@ -252,17 +256,7 @@
#define SMC_outw(v, a, r) writew(v, (a) + (r))
#define SMC_insw(a, r, p, l) readsw((a) + (r), p, l)
#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l)
-
-#include <asm/mach-types.h>
-#include <asm/arch/cpu.h>
-
-#define SMC_IRQ_FLAGS (( \
- machine_is_omap_h2() \
- || machine_is_omap_h3() \
- || machine_is_omap_h4() \
- || (machine_is_omap_innovator() && !cpu_is_omap1510()) \
- ) ? IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING)
-
+#define SMC_IRQ_FLAGS (-1) /* from resource */
#elif defined(CONFIG_SH_SH4202_MICRODEV)
@@ -453,8 +447,7 @@
#define SMC_outl(v, a, r) writel(v, (a) + (r))
#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l)
#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l)
-
-#define SMC_IRQ_FLAGS (0)
+#define SMC_IRQ_FLAGS (-1) /* from resource */
#else