| /* linux/arch/arm/plat-s3c24xx/pwm-clock.c |
| * |
| * Copyright (c) 2007 Simtec Electronics |
| * Copyright (c) 2007, 2008 Ben Dooks |
| * Ben Dooks <ben-linux@fluff.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/list.h> |
| #include <linux/errno.h> |
| #include <linux/clk.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| |
| #include <mach/hardware.h> |
| #include <asm/irq.h> |
| |
| #include <mach/regs-clock.h> |
| #include <mach/regs-gpio.h> |
| |
| #include <plat/clock.h> |
| #include <plat/cpu.h> |
| |
| #include <plat/regs-timer.h> |
| |
| /* Each of the timers 0 through 5 go through the following |
| * clock tree, with the inputs depending on the timers. |
| * |
| * pclk ---- [ prescaler 0 ] -+---> timer 0 |
| * +---> timer 1 |
| * |
| * pclk ---- [ prescaler 1 ] -+---> timer 2 |
| * +---> timer 3 |
| * \---> timer 4 |
| * |
| * Which are fed into the timers as so: |
| * |
| * prescaled 0 ---- [ div 2,4,8,16 ] ---\ |
| * [mux] -> timer 0 |
| * tclk 0 ------------------------------/ |
| * |
| * prescaled 0 ---- [ div 2,4,8,16 ] ---\ |
| * [mux] -> timer 1 |
| * tclk 0 ------------------------------/ |
| * |
| * |
| * prescaled 1 ---- [ div 2,4,8,16 ] ---\ |
| * [mux] -> timer 2 |
| * tclk 1 ------------------------------/ |
| * |
| * prescaled 1 ---- [ div 2,4,8,16 ] ---\ |
| * [mux] -> timer 3 |
| * tclk 1 ------------------------------/ |
| * |
| * prescaled 1 ---- [ div 2,4,8, 16 ] --\ |
| * [mux] -> timer 4 |
| * tclk 1 ------------------------------/ |
| * |
| * Since the mux and the divider are tied together in the |
| * same register space, it is impossible to set the parent |
| * and the rate at the same time. To avoid this, we add an |
| * intermediate 'prescaled-and-divided' clock to select |
| * as the parent for the timer input clock called tdiv. |
| * |
| * prescaled clk --> pwm-tdiv ---\ |
| * [ mux ] --> timer X |
| * tclk -------------------------/ |
| */ |
| |
| static unsigned long clk_pwm_scaler_getrate(struct clk *clk) |
| { |
| unsigned long tcfg0 = __raw_readl(S3C2410_TCFG0); |
| |
| if (clk->id == 1) { |
| tcfg0 &= S3C2410_TCFG_PRESCALER1_MASK; |
| tcfg0 >>= S3C2410_TCFG_PRESCALER1_SHIFT; |
| } else { |
| tcfg0 &= S3C2410_TCFG_PRESCALER0_MASK; |
| } |
| |
| return clk_get_rate(clk->parent) / (tcfg0 + 1); |
| } |
| |
| /* TODO - add set rate calls. */ |
| |
| static struct clk clk_timer_scaler[] = { |
| [0] = { |
| .name = "pwm-scaler0", |
| .id = -1, |
| .get_rate = clk_pwm_scaler_getrate, |
| }, |
| [1] = { |
| .name = "pwm-scaler1", |
| .id = -1, |
| .get_rate = clk_pwm_scaler_getrate, |
| }, |
| }; |
| |
| static struct clk clk_timer_tclk[] = { |
| [0] = { |
| .name = "pwm-tclk0", |
| .id = -1, |
| }, |
| [1] = { |
| .name = "pwm-tclk1", |
| .id = -1, |
| }, |
| }; |
| |
| struct pwm_tdiv_clk { |
| struct clk clk; |
| unsigned int divisor; |
| }; |
| |
| static inline struct pwm_tdiv_clk *to_tdiv(struct clk *clk) |
| { |
| return container_of(clk, struct pwm_tdiv_clk, clk); |
| } |
| |
| static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) |
| { |
| return 1 << (1 + tcfg1); |
| } |
| |
| static unsigned long clk_pwm_tdiv_get_rate(struct clk *clk) |
| { |
| unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1); |
| unsigned int divisor; |
| |
| tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id); |
| tcfg1 &= S3C2410_TCFG1_MUX_MASK; |
| |
| if (tcfg1 == S3C2410_TCFG1_MUX_TCLK) |
| divisor = to_tdiv(clk)->divisor; |
| else |
| divisor = tcfg_to_divisor(tcfg1); |
| |
| return clk_get_rate(clk->parent) / divisor; |
| } |
| |
| static unsigned long clk_pwm_tdiv_round_rate(struct clk *clk, |
| unsigned long rate) |
| { |
| unsigned long parent_rate; |
| unsigned long divisor; |
| |
| parent_rate = clk_get_rate(clk->parent); |
| divisor = parent_rate / rate; |
| |
| if (divisor <= 2) |
| divisor = 2; |
| else if (divisor <= 4) |
| divisor = 4; |
| else if (divisor <= 8) |
| divisor = 8; |
| else |
| divisor = 16; |
| |
| return parent_rate / divisor; |
| } |
| |
| static unsigned long clk_pwm_tdiv_bits(struct pwm_tdiv_clk *divclk) |
| { |
| unsigned long bits; |
| |
| switch (divclk->divisor) { |
| case 2: |
| bits = S3C2410_TCFG1_MUX_DIV2; |
| break; |
| case 4: |
| bits = S3C2410_TCFG1_MUX_DIV4; |
| break; |
| case 8: |
| bits = S3C2410_TCFG1_MUX_DIV8; |
| break; |
| case 16: |
| default: |
| bits = S3C2410_TCFG1_MUX_DIV16; |
| break; |
| } |
| |
| return bits; |
| } |
| |
| static void clk_pwm_tdiv_update(struct pwm_tdiv_clk *divclk) |
| { |
| unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1); |
| unsigned long bits = clk_pwm_tdiv_bits(divclk); |
| unsigned long flags; |
| unsigned long shift = S3C2410_TCFG1_SHIFT(divclk->clk.id); |
| |
| local_irq_save(flags); |
| |
| tcfg1 = __raw_readl(S3C2410_TCFG1); |
| tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift); |
| tcfg1 |= bits << shift; |
| __raw_writel(tcfg1, S3C2410_TCFG1); |
| |
| local_irq_restore(flags); |
| } |
| |
| static int clk_pwm_tdiv_set_rate(struct clk *clk, unsigned long rate) |
| { |
| struct pwm_tdiv_clk *divclk = to_tdiv(clk); |
| unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1); |
| unsigned long parent_rate = clk_get_rate(clk->parent); |
| unsigned long divisor; |
| |
| tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id); |
| tcfg1 &= S3C2410_TCFG1_MUX_MASK; |
| |
| rate = clk_round_rate(clk, rate); |
| divisor = parent_rate / rate; |
| |
| if (divisor > 16) |
| return -EINVAL; |
| |
| divclk->divisor = divisor; |
| |
| /* Update the current MUX settings if we are currently |
| * selected as the clock source for this clock. */ |
| |
| if (tcfg1 != S3C2410_TCFG1_MUX_TCLK) |
| clk_pwm_tdiv_update(divclk); |
| |
| return 0; |
| } |
| |
| static struct pwm_tdiv_clk clk_timer_tdiv[] = { |
| [0] = { |
| .clk = { |
| .name = "pwm-tdiv", |
| .parent = &clk_timer_scaler[0], |
| .get_rate = clk_pwm_tdiv_get_rate, |
| .set_rate = clk_pwm_tdiv_set_rate, |
| .round_rate = clk_pwm_tdiv_round_rate, |
| }, |
| }, |
| [1] = { |
| .clk = { |
| .name = "pwm-tdiv", |
| .parent = &clk_timer_scaler[0], |
| .get_rate = clk_pwm_tdiv_get_rate, |
| .set_rate = clk_pwm_tdiv_set_rate, |
| .round_rate = clk_pwm_tdiv_round_rate, |
| } |
| }, |
| [2] = { |
| .clk = { |
| .name = "pwm-tdiv", |
| .parent = &clk_timer_scaler[1], |
| .get_rate = clk_pwm_tdiv_get_rate, |
| .set_rate = clk_pwm_tdiv_set_rate, |
| .round_rate = clk_pwm_tdiv_round_rate, |
| }, |
| }, |
| [3] = { |
| .clk = { |
| .name = "pwm-tdiv", |
| .parent = &clk_timer_scaler[1], |
| .get_rate = clk_pwm_tdiv_get_rate, |
| .set_rate = clk_pwm_tdiv_set_rate, |
| .round_rate = clk_pwm_tdiv_round_rate, |
| }, |
| }, |
| [4] = { |
| .clk = { |
| .name = "pwm-tdiv", |
| .parent = &clk_timer_scaler[1], |
| .get_rate = clk_pwm_tdiv_get_rate, |
| .set_rate = clk_pwm_tdiv_set_rate, |
| .round_rate = clk_pwm_tdiv_round_rate, |
| }, |
| }, |
| }; |
| |
| static int __init clk_pwm_tdiv_register(unsigned int id) |
| { |
| struct pwm_tdiv_clk *divclk = &clk_timer_tdiv[id]; |
| unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1); |
| |
| tcfg1 >>= S3C2410_TCFG1_SHIFT(id); |
| tcfg1 &= S3C2410_TCFG1_MUX_MASK; |
| |
| divclk->clk.id = id; |
| divclk->divisor = tcfg_to_divisor(tcfg1); |
| |
| return s3c24xx_register_clock(&divclk->clk); |
| } |
| |
| static inline struct clk *s3c24xx_pwmclk_tclk(unsigned int id) |
| { |
| return (id >= 2) ? &clk_timer_tclk[1] : &clk_timer_tclk[0]; |
| } |
| |
| static inline struct clk *s3c24xx_pwmclk_tdiv(unsigned int id) |
| { |
| return &clk_timer_tdiv[id].clk; |
| } |
| |
| static int clk_pwm_tin_set_parent(struct clk *clk, struct clk *parent) |
| { |
| unsigned int id = clk->id; |
| unsigned long tcfg1; |
| unsigned long flags; |
| unsigned long bits; |
| unsigned long shift = S3C2410_TCFG1_SHIFT(id); |
| |
| if (parent == s3c24xx_pwmclk_tclk(id)) |
| bits = S3C2410_TCFG1_MUX_TCLK << shift; |
| else if (parent == s3c24xx_pwmclk_tdiv(id)) |
| bits = clk_pwm_tdiv_bits(to_tdiv(parent)) << shift; |
| else |
| return -EINVAL; |
| |
| clk->parent = parent; |
| |
| local_irq_save(flags); |
| |
| tcfg1 = __raw_readl(S3C2410_TCFG1); |
| tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift); |
| __raw_writel(tcfg1 | bits, S3C2410_TCFG1); |
| |
| local_irq_restore(flags); |
| |
| return 0; |
| } |
| |
| static struct clk clk_tin[] = { |
| [0] = { |
| .name = "pwm-tin", |
| .id = 0, |
| .set_parent = clk_pwm_tin_set_parent, |
| }, |
| [1] = { |
| .name = "pwm-tin", |
| .id = 1, |
| .set_parent = clk_pwm_tin_set_parent, |
| }, |
| [2] = { |
| .name = "pwm-tin", |
| .id = 2, |
| .set_parent = clk_pwm_tin_set_parent, |
| }, |
| [3] = { |
| .name = "pwm-tin", |
| .id = 3, |
| .set_parent = clk_pwm_tin_set_parent, |
| }, |
| [4] = { |
| .name = "pwm-tin", |
| .id = 4, |
| .set_parent = clk_pwm_tin_set_parent, |
| }, |
| }; |
| |
| static __init int clk_pwm_tin_register(struct clk *pwm) |
| { |
| unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1); |
| unsigned int id = pwm->id; |
| |
| struct clk *parent; |
| int ret; |
| |
| ret = s3c24xx_register_clock(pwm); |
| if (ret < 0) |
| return ret; |
| |
| tcfg1 >>= S3C2410_TCFG1_SHIFT(id); |
| tcfg1 &= S3C2410_TCFG1_MUX_MASK; |
| |
| if (tcfg1 == S3C2410_TCFG1_MUX_TCLK) |
| parent = s3c24xx_pwmclk_tclk(id); |
| else |
| parent = s3c24xx_pwmclk_tdiv(id); |
| |
| return clk_set_parent(pwm, parent); |
| } |
| |
| static __init int s3c24xx_pwmclk_init(void) |
| { |
| struct clk *clk_timers; |
| unsigned int clk; |
| int ret; |
| |
| clk_timers = clk_get(NULL, "timers"); |
| if (IS_ERR(clk_timers)) { |
| printk(KERN_ERR "%s: no parent clock\n", __func__); |
| return -EINVAL; |
| } |
| |
| for (clk = 0; clk < ARRAY_SIZE(clk_timer_scaler); clk++) { |
| clk_timer_scaler[clk].parent = clk_timers; |
| ret = s3c24xx_register_clock(&clk_timer_scaler[clk]); |
| if (ret < 0) { |
| printk(KERN_ERR "error adding pwm scaler%d clock\n", clk); |
| goto err; |
| } |
| } |
| |
| for (clk = 0; clk < ARRAY_SIZE(clk_timer_tclk); clk++) { |
| ret = s3c24xx_register_clock(&clk_timer_tclk[clk]); |
| if (ret < 0) { |
| printk(KERN_ERR "error adding pww tclk%d\n", clk); |
| goto err; |
| } |
| } |
| |
| for (clk = 0; clk < ARRAY_SIZE(clk_timer_tdiv); clk++) { |
| ret = clk_pwm_tdiv_register(clk); |
| if (ret < 0) { |
| printk(KERN_ERR "error adding pwm%d tdiv clock\n", clk); |
| goto err; |
| } |
| } |
| |
| for (clk = 0; clk < ARRAY_SIZE(clk_tin); clk++) { |
| ret = clk_pwm_tin_register(&clk_tin[clk]); |
| if (ret < 0) { |
| printk(KERN_ERR "error adding pwm%d tin clock\n", clk); |
| goto err; |
| } |
| } |
| |
| return 0; |
| |
| err: |
| return ret; |
| } |
| |
| arch_initcall(s3c24xx_pwmclk_init); |