gpio/mxc: get rid of the uses of cpu_is_mx()
The patch removes all the uses of cpu_is_mx(). Instead, it utilizes
platform_device_id to distinguish the different gpio types, IMX1_GPIO
on i.mx1, IMX21_GPIO on i.mx21 and i.mx27, IMX31_GPIO on all other
i.mx SoCs.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index 71ba316..3775dcc 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -27,9 +27,29 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/basic_mmio_gpio.h>
-#include <mach/hardware.h>
#include <asm-generic/bug.h>
+enum mxc_gpio_hwtype {
+ IMX1_GPIO, /* runs on i.mx1 */
+ IMX21_GPIO, /* runs on i.mx21 and i.mx27 */
+ IMX31_GPIO, /* runs on all other i.mx */
+};
+
+/* device type dependent stuff */
+struct mxc_gpio_hwdata {
+ unsigned dr_reg;
+ unsigned gdir_reg;
+ unsigned psr_reg;
+ unsigned icr1_reg;
+ unsigned icr2_reg;
+ unsigned imr_reg;
+ unsigned isr_reg;
+ unsigned low_level;
+ unsigned high_level;
+ unsigned rise_edge;
+ unsigned fall_edge;
+};
+
struct mxc_gpio_port {
struct list_head node;
void __iomem *base;
@@ -40,6 +60,66 @@
u32 both_edges;
};
+static struct mxc_gpio_hwdata imx1_imx21_gpio_hwdata = {
+ .dr_reg = 0x1c,
+ .gdir_reg = 0x00,
+ .psr_reg = 0x24,
+ .icr1_reg = 0x28,
+ .icr2_reg = 0x2c,
+ .imr_reg = 0x30,
+ .isr_reg = 0x34,
+ .low_level = 0x03,
+ .high_level = 0x02,
+ .rise_edge = 0x00,
+ .fall_edge = 0x01,
+};
+
+static struct mxc_gpio_hwdata imx31_gpio_hwdata = {
+ .dr_reg = 0x00,
+ .gdir_reg = 0x04,
+ .psr_reg = 0x08,
+ .icr1_reg = 0x0c,
+ .icr2_reg = 0x10,
+ .imr_reg = 0x14,
+ .isr_reg = 0x18,
+ .low_level = 0x00,
+ .high_level = 0x01,
+ .rise_edge = 0x02,
+ .fall_edge = 0x03,
+};
+
+static enum mxc_gpio_hwtype mxc_gpio_hwtype;
+static struct mxc_gpio_hwdata *mxc_gpio_hwdata;
+
+#define GPIO_DR (mxc_gpio_hwdata->dr_reg)
+#define GPIO_GDIR (mxc_gpio_hwdata->gdir_reg)
+#define GPIO_PSR (mxc_gpio_hwdata->psr_reg)
+#define GPIO_ICR1 (mxc_gpio_hwdata->icr1_reg)
+#define GPIO_ICR2 (mxc_gpio_hwdata->icr2_reg)
+#define GPIO_IMR (mxc_gpio_hwdata->imr_reg)
+#define GPIO_ISR (mxc_gpio_hwdata->isr_reg)
+
+#define GPIO_INT_LOW_LEV (mxc_gpio_hwdata->low_level)
+#define GPIO_INT_HIGH_LEV (mxc_gpio_hwdata->high_level)
+#define GPIO_INT_RISE_EDGE (mxc_gpio_hwdata->rise_edge)
+#define GPIO_INT_FALL_EDGE (mxc_gpio_hwdata->fall_edge)
+#define GPIO_INT_NONE 0x4
+
+static struct platform_device_id mxc_gpio_devtype[] = {
+ {
+ .name = "imx1-gpio",
+ .driver_data = IMX1_GPIO,
+ }, {
+ .name = "imx21-gpio",
+ .driver_data = IMX21_GPIO,
+ }, {
+ .name = "imx31-gpio",
+ .driver_data = IMX31_GPIO,
+ }, {
+ /* sentinel */
+ }
+};
+
/*
* MX2 has one interrupt *for all* gpio ports. The list is used
* to save the references to all ports, so that mx2_gpio_irq_handler
@@ -47,22 +127,6 @@
*/
static LIST_HEAD(mxc_gpio_ports);
-#define cpu_is_mx1_mx2() (cpu_is_mx1() || cpu_is_mx2())
-
-#define GPIO_DR (cpu_is_mx1_mx2() ? 0x1c : 0x00)
-#define GPIO_GDIR (cpu_is_mx1_mx2() ? 0x00 : 0x04)
-#define GPIO_PSR (cpu_is_mx1_mx2() ? 0x24 : 0x08)
-#define GPIO_ICR1 (cpu_is_mx1_mx2() ? 0x28 : 0x0C)
-#define GPIO_ICR2 (cpu_is_mx1_mx2() ? 0x2C : 0x10)
-#define GPIO_IMR (cpu_is_mx1_mx2() ? 0x30 : 0x14)
-#define GPIO_ISR (cpu_is_mx1_mx2() ? 0x34 : 0x18)
-
-#define GPIO_INT_LOW_LEV (cpu_is_mx1_mx2() ? 0x3 : 0x0)
-#define GPIO_INT_HIGH_LEV (cpu_is_mx1_mx2() ? 0x2 : 0x1)
-#define GPIO_INT_RISE_EDGE (cpu_is_mx1_mx2() ? 0x0 : 0x2)
-#define GPIO_INT_FALL_EDGE (cpu_is_mx1_mx2() ? 0x1 : 0x3)
-#define GPIO_INT_NONE 0x4
-
/* Note: This driver assumes 32 GPIOs are handled in one register */
static int gpio_set_irq_type(struct irq_data *d, u32 type)
@@ -236,12 +300,36 @@
IRQ_NOREQUEST, 0);
}
+static void __devinit mxc_gpio_get_hw(struct platform_device *pdev)
+{
+ enum mxc_gpio_hwtype hwtype = pdev->id_entry->driver_data;
+
+ if (mxc_gpio_hwtype) {
+ /*
+ * The driver works with a reasonable presupposition,
+ * that is all gpio ports must be the same type when
+ * running on one soc.
+ */
+ BUG_ON(mxc_gpio_hwtype != hwtype);
+ return;
+ }
+
+ if (hwtype == IMX31_GPIO)
+ mxc_gpio_hwdata = &imx31_gpio_hwdata;
+ else
+ mxc_gpio_hwdata = &imx1_imx21_gpio_hwdata;
+
+ mxc_gpio_hwtype = hwtype;
+}
+
static int __devinit mxc_gpio_probe(struct platform_device *pdev)
{
struct mxc_gpio_port *port;
struct resource *iores;
int err;
+ mxc_gpio_get_hw(pdev);
+
port = kzalloc(sizeof(struct mxc_gpio_port), GFP_KERNEL);
if (!port)
return -ENOMEM;
@@ -280,7 +368,7 @@
/* gpio-mxc can be a generic irq chip */
mxc_gpio_init_gc(port);
- if (cpu_is_mx2()) {
+ if (mxc_gpio_hwtype == IMX21_GPIO) {
/* setup one handler for all GPIO interrupts */
if (pdev->id == 0)
irq_set_chained_handler(port->irq,
@@ -334,6 +422,7 @@
.owner = THIS_MODULE,
},
.probe = mxc_gpio_probe,
+ .id_table = mxc_gpio_devtype,
};
static int __init gpio_mxc_init(void)