tg3: Add new HW_TSO_3 flag for 5717
The 5717 sets up TSO slightly differently in the transmit path. It
looks like this method will be the new way of doing things. This patch
defines a flag to indicate this.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 29276e6..6831289 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -5206,7 +5206,7 @@
}
/* hard_start_xmit for devices that don't have any bugs and
- * support TG3_FLG2_HW_TSO_2 only.
+ * support TG3_FLG2_HW_TSO_2 and TG3_FLG2_HW_TSO_3 only.
*/
static netdev_tx_t tg3_start_xmit(struct sk_buff *skb,
struct net_device *dev)
@@ -5265,7 +5265,7 @@
hdrlen = ip_tcp_len + tcp_opt_len;
}
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717) {
+ if (tp->tg3_flags2 & TG3_FLG2_HW_TSO_3) {
mss |= (hdrlen & 0xc) << 12;
if (hdrlen & 0x10)
base_flags |= 0x00000010;
@@ -7523,7 +7523,8 @@
if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
rdmac_mode |= RDMAC_MODE_IPV4_LSO_EN;
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
+ if ((tp->tg3_flags2 & TG3_FLG2_HW_TSO_3) ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
rdmac_mode |= RDMAC_MODE_IPV6_LSO_EN;
@@ -9513,15 +9514,16 @@
return 0;
}
if ((dev->features & NETIF_F_IPV6_CSUM) &&
- (tp->tg3_flags2 & TG3_FLG2_HW_TSO_2)) {
+ ((tp->tg3_flags2 & TG3_FLG2_HW_TSO_2) ||
+ (tp->tg3_flags2 & TG3_FLG2_HW_TSO_3))) {
if (value) {
dev->features |= NETIF_F_TSO6;
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 ||
+ if ((tp->tg3_flags2 & TG3_FLG2_HW_TSO_3) ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 ||
(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 &&
GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5784_AX) ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780 ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717)
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
dev->features |= NETIF_F_TSO_ECN;
} else
dev->features &= ~(NETIF_F_TSO6 | NETIF_F_TSO_ECN);
@@ -12670,8 +12672,10 @@
}
/* Determine TSO capabilities */
- if ((tp->tg3_flags3 & TG3_FLG3_5755_PLUS) ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717)
+ tp->tg3_flags2 |= TG3_FLG2_HW_TSO_3;
+ else if ((tp->tg3_flags3 & TG3_FLG3_5755_PLUS) ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
tp->tg3_flags2 |= TG3_FLG2_HW_TSO_2;
else if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS) {
tp->tg3_flags2 |= TG3_FLG2_HW_TSO_1 | TG3_FLG2_TSO_BUG;
@@ -14136,22 +14140,23 @@
* Firmware TSO on older chips gives lower performance, so it
* is off by default, but can be enabled using ethtool.
*/
- if (tp->tg3_flags2 & TG3_FLG2_HW_TSO) {
- if (dev->features & NETIF_F_IP_CSUM)
- dev->features |= NETIF_F_TSO;
- if ((dev->features & NETIF_F_IPV6_CSUM) &&
- (tp->tg3_flags2 & TG3_FLG2_HW_TSO_2))
+ if ((tp->tg3_flags2 & TG3_FLG2_HW_TSO) &&
+ (dev->features & NETIF_F_IP_CSUM))
+ dev->features |= NETIF_F_TSO;
+
+ if ((tp->tg3_flags2 & TG3_FLG2_HW_TSO_2) ||
+ (tp->tg3_flags2 & TG3_FLG2_HW_TSO_3)) {
+ if (dev->features & NETIF_F_IPV6_CSUM)
dev->features |= NETIF_F_TSO6;
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 ||
+ if ((tp->tg3_flags2 & TG3_FLG2_HW_TSO_3) ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 ||
(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 &&
GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5784_AX) ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780 ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717)
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
dev->features |= NETIF_F_TSO_ECN;
}
-
if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A1 &&
!(tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) &&
!(tr32(TG3PCI_PCISTATE) & PCISTATE_BUS_SPEED_HIGH)) {