drivers/net/can/mscan/mpc5xxx_can.c - kernel/msm-4.9 - Gitiles

 /*
  * CAN bus driver for the Freescale MPC5xxx embedded CPU.
  *
  * Copyright (C) 2004-2005 Andrey Volkov <avolkov@varma-el.com>,
  *                         Varma Electronics Oy
  * Copyright (C) 2008-2009 Wolfgang Grandegger <wg@grandegger.com>
  * Copyright (C) 2009 Wolfram Sang, Pengutronix <w.sang@pengutronix.de>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the version 2 of the GNU General Public License
  * as published by the Free Software Foundation
  *
  * This program is distributed in the hope that it will be useful, but
  * WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, see <http://www.gnu.org/licenses/>.
  */

 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/netdevice.h>
 #include <linux/can/dev.h>
 #include <linux/of_platform.h>
 #include <sysdev/fsl_soc.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <asm/mpc52xx.h>

 #include "mscan.h"

 #define DRV_NAME "mpc5xxx_can"

 struct mpc5xxx_can_data {
 	unsigned int type;
 	u32 (*get_clock)(struct platform_device *ofdev, const char *clock_name,
 			 int *mscan_clksrc);
 	void (*put_clock)(struct platform_device *ofdev);
 };

 #ifdef CONFIG_PPC_MPC52xx
 static struct of_device_id mpc52xx_cdm_ids[] = {
 	{ .compatible = "fsl,mpc5200-cdm", },
 	{}
 };

 static u32 mpc52xx_can_get_clock(struct platform_device *ofdev,
 				 const char *clock_name, int *mscan_clksrc)
 {
 	unsigned int pvr;
 	struct mpc52xx_cdm  __iomem *cdm;
 	struct device_node *np_cdm;
 	unsigned int freq;
 	u32 val;

 	pvr = mfspr(SPRN_PVR);

 	/*
 	 * Either the oscillator clock (SYS_XTAL_IN) or the IP bus clock
 	 * (IP_CLK) can be selected as MSCAN clock source. According to
 	 * the MPC5200 user's manual, the oscillator clock is the better
 	 * choice as it has less jitter. For this reason, it is selected
 	 * by default. Unfortunately, it can not be selected for the old
 	 * MPC5200 Rev. A chips due to a hardware bug (check errata).
 	 */
 	if (clock_name && strcmp(clock_name, "ip") == 0)
 		*mscan_clksrc = MSCAN_CLKSRC_BUS;
 	else
 		*mscan_clksrc = MSCAN_CLKSRC_XTAL;

 	freq = mpc5xxx_get_bus_frequency(ofdev->dev.of_node);
 	if (!freq)
 		return 0;

 	if (*mscan_clksrc == MSCAN_CLKSRC_BUS || pvr == 0x80822011)
 		return freq;

 	/* Determine SYS_XTAL_IN frequency from the clock domain settings */
 	np_cdm = of_find_matching_node(NULL, mpc52xx_cdm_ids);
 	if (!np_cdm) {
 		dev_err(&ofdev->dev, "can't get clock node!\n");
 		return 0;
 	}
 	cdm = of_iomap(np_cdm, 0);

 	if (in_8(&cdm->ipb_clk_sel) & 0x1)
 		freq *= 2;
 	val = in_be32(&cdm->rstcfg);

 	freq *= (val & (1 << 5)) ? 8 : 4;
 	freq /= (val & (1 << 6)) ? 12 : 16;

 	of_node_put(np_cdm);
 	iounmap(cdm);

 	return freq;
 }
 #else /* !CONFIG_PPC_MPC52xx */
 static u32 mpc52xx_can_get_clock(struct platform_device *ofdev,
 				 const char *clock_name, int *mscan_clksrc)
 {
 	return 0;
 }
 #endif /* CONFIG_PPC_MPC52xx */

 #ifdef CONFIG_PPC_MPC512x
 static u32 mpc512x_can_get_clock(struct platform_device *ofdev,
 				 const char *clock_source, int *mscan_clksrc)
 {
 	struct device_node *np;
 	u32 clockdiv;
 	enum {
 		CLK_FROM_AUTO,
 		CLK_FROM_IPS,
 		CLK_FROM_SYS,
 		CLK_FROM_REF,
 	} clk_from;
 	struct clk *clk_in, *clk_can;
 	unsigned long freq_calc;
 	struct mscan_priv *priv;
 	struct clk *clk_ipg;

 	/* the caller passed in the clock source spec that was read from
 	 * the device tree, get the optional clock divider as well
 	 */
 	np = ofdev->dev.of_node;
 	clockdiv = 1;
 	of_property_read_u32(np, "fsl,mscan-clock-divider", &clockdiv);
 	dev_dbg(&ofdev->dev, "device tree specs: clk src[%s] div[%d]\n",
 		clock_source ? clock_source : "<NULL>", clockdiv);

 	/* when clock-source is 'ip', the CANCTL1[CLKSRC] bit needs to
 	 * get set, and the 'ips' clock is the input to the MSCAN
 	 * component
 	 *
 	 * for clock-source values of 'ref' or 'sys' the CANCTL1[CLKSRC]
 	 * bit needs to get cleared, an optional clock-divider may have
 	 * been specified (the default value is 1), the appropriate
 	 * MSCAN related MCLK is the input to the MSCAN component
 	 *
 	 * in the absence of a clock-source spec, first an optimal clock
 	 * gets determined based on the 'sys' clock, if that fails the
 	 * 'ref' clock is used
 	 */
 	clk_from = CLK_FROM_AUTO;
 	if (clock_source) {
 		/* interpret the device tree's spec for the clock source */
 		if (!strcmp(clock_source, "ip"))
 			clk_from = CLK_FROM_IPS;
 		else if (!strcmp(clock_source, "sys"))
 			clk_from = CLK_FROM_SYS;
 		else if (!strcmp(clock_source, "ref"))
 			clk_from = CLK_FROM_REF;
 		else
 			goto err_invalid;
 		dev_dbg(&ofdev->dev, "got a clk source spec[%d]\n", clk_from);
 	}
 	if (clk_from == CLK_FROM_AUTO) {
 		/* no spec so far, try the 'sys' clock; round to the
 		 * next MHz and see if we can get a multiple of 16MHz
 		 */
 		dev_dbg(&ofdev->dev, "no clk source spec, trying SYS\n");
 		clk_in = devm_clk_get(&ofdev->dev, "sys");
 		if (IS_ERR(clk_in))
 			goto err_notavail;
 		freq_calc = clk_get_rate(clk_in);
 		freq_calc +=  499999;
 		freq_calc /= 1000000;
 		freq_calc *= 1000000;
 		if ((freq_calc % 16000000) == 0) {
 			clk_from = CLK_FROM_SYS;
 			clockdiv = freq_calc / 16000000;
 			dev_dbg(&ofdev->dev,
 				"clk fit, sys[%lu] div[%d] freq[%lu]\n",
 				freq_calc, clockdiv, freq_calc / clockdiv);
 		}
 	}
 	if (clk_from == CLK_FROM_AUTO) {
 		/* no spec so far, use the 'ref' clock */
 		dev_dbg(&ofdev->dev, "no clk source spec, trying REF\n");
 		clk_in = devm_clk_get(&ofdev->dev, "ref");
 		if (IS_ERR(clk_in))
 			goto err_notavail;
 		clk_from = CLK_FROM_REF;
 		freq_calc = clk_get_rate(clk_in);
 		dev_dbg(&ofdev->dev,
 			"clk fit, ref[%lu] (no div) freq[%lu]\n",
 			freq_calc, freq_calc);
 	}

 	/* select IPS or MCLK as the MSCAN input (returned to the caller),
 	 * setup the MCLK mux source and rate if applicable, apply the
 	 * optionally specified or derived above divider, and determine
 	 * the actual resulting clock rate to return to the caller
 	 */
 	switch (clk_from) {
 	case CLK_FROM_IPS:
 		clk_can = devm_clk_get(&ofdev->dev, "ips");
 		if (IS_ERR(clk_can))
 			goto err_notavail;
 		priv = netdev_priv(dev_get_drvdata(&ofdev->dev));
 		priv->clk_can = clk_can;
 		freq_calc = clk_get_rate(clk_can);
 		*mscan_clksrc = MSCAN_CLKSRC_IPS;
 		dev_dbg(&ofdev->dev, "clk from IPS, clksrc[%d] freq[%lu]\n",
 			*mscan_clksrc, freq_calc);
 		break;
 	case CLK_FROM_SYS:
 	case CLK_FROM_REF:
 		clk_can = devm_clk_get(&ofdev->dev, "mclk");
 		if (IS_ERR(clk_can))
 			goto err_notavail;
 		priv = netdev_priv(dev_get_drvdata(&ofdev->dev));
 		priv->clk_can = clk_can;
 		if (clk_from == CLK_FROM_SYS)
 			clk_in = devm_clk_get(&ofdev->dev, "sys");
 		if (clk_from == CLK_FROM_REF)
 			clk_in = devm_clk_get(&ofdev->dev, "ref");
 		if (IS_ERR(clk_in))
 			goto err_notavail;
 		clk_set_parent(clk_can, clk_in);
 		freq_calc = clk_get_rate(clk_in);
 		freq_calc /= clockdiv;
 		clk_set_rate(clk_can, freq_calc);
 		freq_calc = clk_get_rate(clk_can);
 		*mscan_clksrc = MSCAN_CLKSRC_BUS;
 		dev_dbg(&ofdev->dev, "clk from MCLK, clksrc[%d] freq[%lu]\n",
 			*mscan_clksrc, freq_calc);
 		break;
 	default:
 		goto err_invalid;
 	}

 	/* the above clk_can item is used for the bitrate, access to
 	 * the peripheral's register set needs the clk_ipg item
 	 */
 	clk_ipg = devm_clk_get(&ofdev->dev, "ipg");
 	if (IS_ERR(clk_ipg))
 		goto err_notavail_ipg;
 	if (clk_prepare_enable(clk_ipg))
 		goto err_notavail_ipg;
 	priv = netdev_priv(dev_get_drvdata(&ofdev->dev));
 	priv->clk_ipg = clk_ipg;

 	/* return the determined clock source rate */
 	return freq_calc;

 err_invalid:
 	dev_err(&ofdev->dev, "invalid clock source specification\n");
 	/* clock source rate could not get determined */
 	return 0;

 err_notavail:
 	dev_err(&ofdev->dev, "cannot acquire or setup bitrate clock source\n");
 	/* clock source rate could not get determined */
 	return 0;

 err_notavail_ipg:
 	dev_err(&ofdev->dev, "cannot acquire or setup register clock\n");
 	/* clock source rate could not get determined */
 	return 0;
 }

 static void mpc512x_can_put_clock(struct platform_device *ofdev)
 {
 	struct mscan_priv *priv;

 	priv = netdev_priv(dev_get_drvdata(&ofdev->dev));
 	if (priv->clk_ipg)
 		clk_disable_unprepare(priv->clk_ipg);
 }
 #else /* !CONFIG_PPC_MPC512x */
 static u32 mpc512x_can_get_clock(struct platform_device *ofdev,
 				 const char *clock_name, int *mscan_clksrc)
 {
 	return 0;
 }
 #define mpc512x_can_put_clock NULL
 #endif /* CONFIG_PPC_MPC512x */

 static const struct of_device_id mpc5xxx_can_table[];
 static int mpc5xxx_can_probe(struct platform_device *ofdev)
 {
 	const struct of_device_id *match;
 	const struct mpc5xxx_can_data *data;
 	struct device_node *np = ofdev->dev.of_node;
 	struct net_device *dev;
 	struct mscan_priv *priv;
 	void __iomem *base;
 	const char *clock_name = NULL;
 	int irq, mscan_clksrc = 0;
 	int err = -ENOMEM;

 	match = of_match_device(mpc5xxx_can_table, &ofdev->dev);
 	if (!match)
 		return -EINVAL;
 	data = match->data;

 	base = of_iomap(np, 0);
 	if (!base) {
 		dev_err(&ofdev->dev, "couldn't ioremap\n");
 		return err;
 	}

 	irq = irq_of_parse_and_map(np, 0);
 	if (!irq) {
 		dev_err(&ofdev->dev, "no irq found\n");
 		err = -ENODEV;
 		goto exit_unmap_mem;
 	}

 	dev = alloc_mscandev();
 	if (!dev)
 		goto exit_dispose_irq;
 	platform_set_drvdata(ofdev, dev);
 	SET_NETDEV_DEV(dev, &ofdev->dev);

 	priv = netdev_priv(dev);
 	priv->reg_base = base;
 	dev->irq = irq;

 	clock_name = of_get_property(np, "fsl,mscan-clock-source", NULL);

 	BUG_ON(!data);
 	priv->type = data->type;
 	priv->can.clock.freq = data->get_clock(ofdev, clock_name,
 					       &mscan_clksrc);
 	if (!priv->can.clock.freq) {
 		dev_err(&ofdev->dev, "couldn't get MSCAN clock properties\n");
 		goto exit_free_mscan;
 	}

 	err = register_mscandev(dev, mscan_clksrc);
 	if (err) {
 		dev_err(&ofdev->dev, "registering %s failed (err=%d)\n",
 			DRV_NAME, err);
 		goto exit_free_mscan;
 	}

 	dev_info(&ofdev->dev, "MSCAN at 0x%p, irq %d, clock %d Hz\n",
 		 priv->reg_base, dev->irq, priv->can.clock.freq);

 	return 0;

 exit_free_mscan:
 	free_candev(dev);
 exit_dispose_irq:
 	irq_dispose_mapping(irq);
 exit_unmap_mem:
 	iounmap(base);

 	return err;
 }

 static int mpc5xxx_can_remove(struct platform_device *ofdev)
 {
 	const struct of_device_id *match;
 	const struct mpc5xxx_can_data *data;
 	struct net_device *dev = platform_get_drvdata(ofdev);
 	struct mscan_priv *priv = netdev_priv(dev);

 	match = of_match_device(mpc5xxx_can_table, &ofdev->dev);
 	data = match ? match->data : NULL;

 	unregister_mscandev(dev);
 	if (data && data->put_clock)
 		data->put_clock(ofdev);
 	iounmap(priv->reg_base);
 	irq_dispose_mapping(dev->irq);
 	free_candev(dev);

 	return 0;
 }

 #ifdef CONFIG_PM
 static struct mscan_regs saved_regs;
 static int mpc5xxx_can_suspend(struct platform_device *ofdev, pm_message_t state)
 {
 	struct net_device *dev = platform_get_drvdata(ofdev);
 	struct mscan_priv *priv = netdev_priv(dev);
 	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;

 	_memcpy_fromio(&saved_regs, regs, sizeof(*regs));

 	return 0;
 }

 static int mpc5xxx_can_resume(struct platform_device *ofdev)
 {
 	struct net_device *dev = platform_get_drvdata(ofdev);
 	struct mscan_priv *priv = netdev_priv(dev);
 	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;

 	regs->canctl0 |= MSCAN_INITRQ;
 	while (!(regs->canctl1 & MSCAN_INITAK))
 		udelay(10);

 	regs->canctl1 = saved_regs.canctl1;
 	regs->canbtr0 = saved_regs.canbtr0;
 	regs->canbtr1 = saved_regs.canbtr1;
 	regs->canidac = saved_regs.canidac;

 	/* restore masks, buffers etc. */
 	_memcpy_toio(&regs->canidar1_0, (void *)&saved_regs.canidar1_0,
 		     sizeof(*regs) - offsetof(struct mscan_regs, canidar1_0));

 	regs->canctl0 &= ~MSCAN_INITRQ;
 	regs->cantbsel = saved_regs.cantbsel;
 	regs->canrier = saved_regs.canrier;
 	regs->cantier = saved_regs.cantier;
 	regs->canctl0 = saved_regs.canctl0;

 	return 0;
 }
 #endif

 static const struct mpc5xxx_can_data mpc5200_can_data = {
 	.type = MSCAN_TYPE_MPC5200,
 	.get_clock = mpc52xx_can_get_clock,
 	/* .put_clock not applicable */
 };

 static const struct mpc5xxx_can_data mpc5121_can_data = {
 	.type = MSCAN_TYPE_MPC5121,
 	.get_clock = mpc512x_can_get_clock,
 	.put_clock = mpc512x_can_put_clock,
 };

 static const struct of_device_id mpc5xxx_can_table[] = {
 	{ .compatible = "fsl,mpc5200-mscan", .data = &mpc5200_can_data, },
 	/* Note that only MPC5121 Rev. 2 (and later) is supported */
 	{ .compatible = "fsl,mpc5121-mscan", .data = &mpc5121_can_data, },
 	{},
 };
 MODULE_DEVICE_TABLE(of, mpc5xxx_can_table);

 static struct platform_driver mpc5xxx_can_driver = {
 	.driver = {
 		.name = "mpc5xxx_can",
 		.of_match_table = mpc5xxx_can_table,
 	},
 	.probe = mpc5xxx_can_probe,
 	.remove = mpc5xxx_can_remove,
 #ifdef CONFIG_PM
 	.suspend = mpc5xxx_can_suspend,
 	.resume = mpc5xxx_can_resume,
 #endif
 };

 module_platform_driver(mpc5xxx_can_driver);

 MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>");
 MODULE_DESCRIPTION("Freescale MPC5xxx CAN driver");
 MODULE_LICENSE("GPL v2");
	/*
	* CAN bus driver for the Freescale MPC5xxx embedded CPU.
	*
	* Copyright (C) 2004-2005 Andrey Volkov <avolkov@varma-el.com>,
	* Varma Electronics Oy
	* Copyright (C) 2008-2009 Wolfgang Grandegger <wg@grandegger.com>
	* Copyright (C) 2009 Wolfram Sang, Pengutronix <w.sang@pengutronix.de>
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the version 2 of the GNU General Public License
	* as published by the Free Software Foundation
	*
	* This program is distributed in the hope that it will be useful, but
	* WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, see <http://www.gnu.org/licenses/>.
	*/

	#include <linux/kernel.h>
	#include <linux/module.h>
	#include <linux/interrupt.h>
	#include <linux/platform_device.h>
	#include <linux/netdevice.h>
	#include <linux/can/dev.h>
	#include <linux/of_platform.h>
	#include <sysdev/fsl_soc.h>
	#include <linux/clk.h>
	#include <linux/io.h>
	#include <asm/mpc52xx.h>

	#include "mscan.h"

	#define DRV_NAME "mpc5xxx_can"

	struct mpc5xxx_can_data {
	unsigned int type;
	u32 (get_clock)(struct platform_device ofdev, const char *clock_name,
	int *mscan_clksrc);
	void (put_clock)(struct platform_device ofdev);
	};

	#ifdef CONFIG_PPC_MPC52xx
	static struct of_device_id mpc52xx_cdm_ids[] = {
	{ .compatible = "fsl,mpc5200-cdm", },
	{}
	};

	static u32 mpc52xx_can_get_clock(struct platform_device *ofdev,
	const char clock_name, int mscan_clksrc)
	{
	unsigned int pvr;
	struct mpc52xx_cdm __iomem *cdm;
	struct device_node *np_cdm;
	unsigned int freq;
	u32 val;

	pvr = mfspr(SPRN_PVR);

	/*
	* Either the oscillator clock (SYS_XTAL_IN) or the IP bus clock
	* (IP_CLK) can be selected as MSCAN clock source. According to
	* the MPC5200 user's manual, the oscillator clock is the better
	* choice as it has less jitter. For this reason, it is selected
	* by default. Unfortunately, it can not be selected for the old
	* MPC5200 Rev. A chips due to a hardware bug (check errata).
	*/
	if (clock_name && strcmp(clock_name, "ip") == 0)
	*mscan_clksrc = MSCAN_CLKSRC_BUS;
	else
	*mscan_clksrc = MSCAN_CLKSRC_XTAL;

	freq = mpc5xxx_get_bus_frequency(ofdev->dev.of_node);
	if (!freq)
	return 0;

	if (*mscan_clksrc == MSCAN_CLKSRC_BUS \|\| pvr == 0x80822011)
	return freq;

	/* Determine SYS_XTAL_IN frequency from the clock domain settings */
	np_cdm = of_find_matching_node(NULL, mpc52xx_cdm_ids);
	if (!np_cdm) {
	dev_err(&ofdev->dev, "can't get clock node!\n");
	return 0;
	}
	cdm = of_iomap(np_cdm, 0);

	if (in_8(&cdm->ipb_clk_sel) & 0x1)
	freq *= 2;
	val = in_be32(&cdm->rstcfg);

	freq *= (val & (1 << 5)) ? 8 : 4;
	freq /= (val & (1 << 6)) ? 12 : 16;

	of_node_put(np_cdm);
	iounmap(cdm);

	return freq;
	}
	#else /* !CONFIG_PPC_MPC52xx */
	static u32 mpc52xx_can_get_clock(struct platform_device *ofdev,
	const char clock_name, int mscan_clksrc)
	{
	return 0;
	}
	#endif /* CONFIG_PPC_MPC52xx */

	#ifdef CONFIG_PPC_MPC512x
	static u32 mpc512x_can_get_clock(struct platform_device *ofdev,
	const char clock_source, int mscan_clksrc)
	{
	struct device_node *np;
	u32 clockdiv;
	enum {
	CLK_FROM_AUTO,
	CLK_FROM_IPS,
	CLK_FROM_SYS,
	CLK_FROM_REF,
	} clk_from;
	struct clk clk_in, clk_can;
	unsigned long freq_calc;
	struct mscan_priv *priv;
	struct clk *clk_ipg;

	/* the caller passed in the clock source spec that was read from
	* the device tree, get the optional clock divider as well
	*/
	np = ofdev->dev.of_node;
	clockdiv = 1;
	of_property_read_u32(np, "fsl,mscan-clock-divider", &clockdiv);
	dev_dbg(&ofdev->dev, "device tree specs: clk src[%s] div[%d]\n",
	clock_source ? clock_source : "<NULL>", clockdiv);

	/* when clock-source is 'ip', the CANCTL1[CLKSRC] bit needs to
	* get set, and the 'ips' clock is the input to the MSCAN
	* component
	*
	* for clock-source values of 'ref' or 'sys' the CANCTL1[CLKSRC]
	* bit needs to get cleared, an optional clock-divider may have
	* been specified (the default value is 1), the appropriate
	* MSCAN related MCLK is the input to the MSCAN component
	*
	* in the absence of a clock-source spec, first an optimal clock
	* gets determined based on the 'sys' clock, if that fails the
	* 'ref' clock is used
	*/
	clk_from = CLK_FROM_AUTO;
	if (clock_source) {
	/* interpret the device tree's spec for the clock source */
	if (!strcmp(clock_source, "ip"))
	clk_from = CLK_FROM_IPS;
	else if (!strcmp(clock_source, "sys"))
	clk_from = CLK_FROM_SYS;
	else if (!strcmp(clock_source, "ref"))
	clk_from = CLK_FROM_REF;
	else
	goto err_invalid;
	dev_dbg(&ofdev->dev, "got a clk source spec[%d]\n", clk_from);
	}
	if (clk_from == CLK_FROM_AUTO) {
	/* no spec so far, try the 'sys' clock; round to the
	* next MHz and see if we can get a multiple of 16MHz
	*/
	dev_dbg(&ofdev->dev, "no clk source spec, trying SYS\n");
	clk_in = devm_clk_get(&ofdev->dev, "sys");
	if (IS_ERR(clk_in))
	goto err_notavail;
	freq_calc = clk_get_rate(clk_in);
	freq_calc += 499999;
	freq_calc /= 1000000;
	freq_calc *= 1000000;
	if ((freq_calc % 16000000) == 0) {
	clk_from = CLK_FROM_SYS;
	clockdiv = freq_calc / 16000000;
	dev_dbg(&ofdev->dev,
	"clk fit, sys[%lu] div[%d] freq[%lu]\n",
	freq_calc, clockdiv, freq_calc / clockdiv);
	}
	}
	if (clk_from == CLK_FROM_AUTO) {
	/* no spec so far, use the 'ref' clock */
	dev_dbg(&ofdev->dev, "no clk source spec, trying REF\n");
	clk_in = devm_clk_get(&ofdev->dev, "ref");
	if (IS_ERR(clk_in))
	goto err_notavail;
	clk_from = CLK_FROM_REF;
	freq_calc = clk_get_rate(clk_in);
	dev_dbg(&ofdev->dev,
	"clk fit, ref[%lu] (no div) freq[%lu]\n",
	freq_calc, freq_calc);
	}

	/* select IPS or MCLK as the MSCAN input (returned to the caller),
	* setup the MCLK mux source and rate if applicable, apply the
	* optionally specified or derived above divider, and determine
	* the actual resulting clock rate to return to the caller
	*/
	switch (clk_from) {
	case CLK_FROM_IPS:
	clk_can = devm_clk_get(&ofdev->dev, "ips");
	if (IS_ERR(clk_can))
	goto err_notavail;
	priv = netdev_priv(dev_get_drvdata(&ofdev->dev));
	priv->clk_can = clk_can;
	freq_calc = clk_get_rate(clk_can);
	*mscan_clksrc = MSCAN_CLKSRC_IPS;
	dev_dbg(&ofdev->dev, "clk from IPS, clksrc[%d] freq[%lu]\n",
	*mscan_clksrc, freq_calc);
	break;
	case CLK_FROM_SYS:
	case CLK_FROM_REF:
	clk_can = devm_clk_get(&ofdev->dev, "mclk");
	if (IS_ERR(clk_can))
	goto err_notavail;
	priv = netdev_priv(dev_get_drvdata(&ofdev->dev));
	priv->clk_can = clk_can;
	if (clk_from == CLK_FROM_SYS)
	clk_in = devm_clk_get(&ofdev->dev, "sys");
	if (clk_from == CLK_FROM_REF)
	clk_in = devm_clk_get(&ofdev->dev, "ref");
	if (IS_ERR(clk_in))
	goto err_notavail;
	clk_set_parent(clk_can, clk_in);
	freq_calc = clk_get_rate(clk_in);
	freq_calc /= clockdiv;
	clk_set_rate(clk_can, freq_calc);
	freq_calc = clk_get_rate(clk_can);
	*mscan_clksrc = MSCAN_CLKSRC_BUS;
	dev_dbg(&ofdev->dev, "clk from MCLK, clksrc[%d] freq[%lu]\n",
	*mscan_clksrc, freq_calc);
	break;
	default:
	goto err_invalid;
	}

	/* the above clk_can item is used for the bitrate, access to
	* the peripheral's register set needs the clk_ipg item
	*/
	clk_ipg = devm_clk_get(&ofdev->dev, "ipg");
	if (IS_ERR(clk_ipg))
	goto err_notavail_ipg;
	if (clk_prepare_enable(clk_ipg))
	goto err_notavail_ipg;
	priv = netdev_priv(dev_get_drvdata(&ofdev->dev));
	priv->clk_ipg = clk_ipg;

	/* return the determined clock source rate */
	return freq_calc;

	err_invalid:
	dev_err(&ofdev->dev, "invalid clock source specification\n");
	/* clock source rate could not get determined */
	return 0;

	err_notavail:
	dev_err(&ofdev->dev, "cannot acquire or setup bitrate clock source\n");
	/* clock source rate could not get determined */
	return 0;

	err_notavail_ipg:
	dev_err(&ofdev->dev, "cannot acquire or setup register clock\n");
	/* clock source rate could not get determined */
	return 0;
	}

	static void mpc512x_can_put_clock(struct platform_device *ofdev)
	{
	struct mscan_priv *priv;

	priv = netdev_priv(dev_get_drvdata(&ofdev->dev));
	if (priv->clk_ipg)
	clk_disable_unprepare(priv->clk_ipg);
	}
	#else /* !CONFIG_PPC_MPC512x */
	static u32 mpc512x_can_get_clock(struct platform_device *ofdev,
	const char clock_name, int mscan_clksrc)
	{
	return 0;
	}
	#define mpc512x_can_put_clock NULL
	#endif /* CONFIG_PPC_MPC512x */

	static const struct of_device_id mpc5xxx_can_table[];
	static int mpc5xxx_can_probe(struct platform_device *ofdev)
	{
	const struct of_device_id *match;
	const struct mpc5xxx_can_data *data;
	struct device_node *np = ofdev->dev.of_node;
	struct net_device *dev;
	struct mscan_priv *priv;
	void __iomem *base;
	const char *clock_name = NULL;
	int irq, mscan_clksrc = 0;
	int err = -ENOMEM;

	match = of_match_device(mpc5xxx_can_table, &ofdev->dev);
	if (!match)
	return -EINVAL;
	data = match->data;

	base = of_iomap(np, 0);
	if (!base) {
	dev_err(&ofdev->dev, "couldn't ioremap\n");
	return err;
	}

	irq = irq_of_parse_and_map(np, 0);
	if (!irq) {
	dev_err(&ofdev->dev, "no irq found\n");
	err = -ENODEV;
	goto exit_unmap_mem;
	}

	dev = alloc_mscandev();
	if (!dev)
	goto exit_dispose_irq;
	platform_set_drvdata(ofdev, dev);
	SET_NETDEV_DEV(dev, &ofdev->dev);

	priv = netdev_priv(dev);
	priv->reg_base = base;
	dev->irq = irq;

	clock_name = of_get_property(np, "fsl,mscan-clock-source", NULL);

	BUG_ON(!data);
	priv->type = data->type;
	priv->can.clock.freq = data->get_clock(ofdev, clock_name,
	&mscan_clksrc);
	if (!priv->can.clock.freq) {
	dev_err(&ofdev->dev, "couldn't get MSCAN clock properties\n");
	goto exit_free_mscan;
	}

	err = register_mscandev(dev, mscan_clksrc);
	if (err) {
	dev_err(&ofdev->dev, "registering %s failed (err=%d)\n",
	DRV_NAME, err);
	goto exit_free_mscan;
	}

	dev_info(&ofdev->dev, "MSCAN at 0x%p, irq %d, clock %d Hz\n",
	priv->reg_base, dev->irq, priv->can.clock.freq);

	return 0;

	exit_free_mscan:
	free_candev(dev);
	exit_dispose_irq:
	irq_dispose_mapping(irq);
	exit_unmap_mem:
	iounmap(base);

	return err;
	}

	static int mpc5xxx_can_remove(struct platform_device *ofdev)
	{
	const struct of_device_id *match;
	const struct mpc5xxx_can_data *data;
	struct net_device *dev = platform_get_drvdata(ofdev);
	struct mscan_priv *priv = netdev_priv(dev);

	match = of_match_device(mpc5xxx_can_table, &ofdev->dev);
	data = match ? match->data : NULL;

	unregister_mscandev(dev);
	if (data && data->put_clock)
	data->put_clock(ofdev);
	iounmap(priv->reg_base);
	irq_dispose_mapping(dev->irq);
	free_candev(dev);

	return 0;
	}

	#ifdef CONFIG_PM
	static struct mscan_regs saved_regs;
	static int mpc5xxx_can_suspend(struct platform_device *ofdev, pm_message_t state)
	{
	struct net_device *dev = platform_get_drvdata(ofdev);
	struct mscan_priv *priv = netdev_priv(dev);
	struct mscan_regs regs = (struct mscan_regs )priv->reg_base;

	_memcpy_fromio(&saved_regs, regs, sizeof(*regs));

	return 0;
	}

	static int mpc5xxx_can_resume(struct platform_device *ofdev)
	{
	struct net_device *dev = platform_get_drvdata(ofdev);
	struct mscan_priv *priv = netdev_priv(dev);
	struct mscan_regs regs = (struct mscan_regs )priv->reg_base;

	regs->canctl0 \|= MSCAN_INITRQ;
	while (!(regs->canctl1 & MSCAN_INITAK))
	udelay(10);

	regs->canctl1 = saved_regs.canctl1;
	regs->canbtr0 = saved_regs.canbtr0;
	regs->canbtr1 = saved_regs.canbtr1;
	regs->canidac = saved_regs.canidac;

	/* restore masks, buffers etc. */
	_memcpy_toio(&regs->canidar1_0, (void *)&saved_regs.canidar1_0,
	sizeof(*regs) - offsetof(struct mscan_regs, canidar1_0));

	regs->canctl0 &= ~MSCAN_INITRQ;
	regs->cantbsel = saved_regs.cantbsel;
	regs->canrier = saved_regs.canrier;
	regs->cantier = saved_regs.cantier;
	regs->canctl0 = saved_regs.canctl0;

	return 0;
	}
	#endif

	static const struct mpc5xxx_can_data mpc5200_can_data = {
	.type = MSCAN_TYPE_MPC5200,
	.get_clock = mpc52xx_can_get_clock,
	/* .put_clock not applicable */
	};

	static const struct mpc5xxx_can_data mpc5121_can_data = {
	.type = MSCAN_TYPE_MPC5121,
	.get_clock = mpc512x_can_get_clock,
	.put_clock = mpc512x_can_put_clock,
	};

	static const struct of_device_id mpc5xxx_can_table[] = {
	{ .compatible = "fsl,mpc5200-mscan", .data = &mpc5200_can_data, },
	/* Note that only MPC5121 Rev. 2 (and later) is supported */
	{ .compatible = "fsl,mpc5121-mscan", .data = &mpc5121_can_data, },
	{},
	};
	MODULE_DEVICE_TABLE(of, mpc5xxx_can_table);

	static struct platform_driver mpc5xxx_can_driver = {
	.driver = {
	.name = "mpc5xxx_can",
	.of_match_table = mpc5xxx_can_table,
	},
	.probe = mpc5xxx_can_probe,
	.remove = mpc5xxx_can_remove,
	#ifdef CONFIG_PM
	.suspend = mpc5xxx_can_suspend,
	.resume = mpc5xxx_can_resume,
	#endif
	};

	module_platform_driver(mpc5xxx_can_driver);

	MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>");
	MODULE_DESCRIPTION("Freescale MPC5xxx CAN driver");
	MODULE_LICENSE("GPL v2");