OMAPDSS: Add LCD3 overlay manager and Clock and IRQ support
The support for LCD3 manager has been added into the manager module. LCD3 panel
has registers as DISPC_CONTROL3 and DISPC_CONFIG3 just like those in LCD and
LCD2 panels. These registers control the Display Controller (DISPC) module for
LCD3 output. The three LCDs support Display Serial Interface (DSI), Remote Frame
Buffer Interface (RFBI) and Parallel CMOS Output Interface (DPI). These LCDs can
be connected through parallel output interface using DISPC and RFBI or DPI. For
serial interface DSS uses DSI.
The LCD3 panel, just like LCD and LCD2 panels, has a clock switch in DSS_CTRL
register which has been enabled. The clock switch chooses between DSS_CLK and
DPLL_DSI1_C_CLK1 as source for LCD3_CLK. New IRQs as DISPC_IRQ_VSYNC3,
DISPC_IRQ_FRAMEDONE3, DISPC_IRQ_ACBIAS_COUNT_STAT3 and DISPC_IRQ_SYNC_LOST3 have
been added specific to the new manager.
Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index d2b5719..fc0c3ce 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -388,7 +388,8 @@
dsi_wait_pll_hsdiv_dispc_active(dsidev);
break;
case OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DISPC:
- BUG_ON(channel != OMAP_DSS_CHANNEL_LCD2);
+ BUG_ON(channel != OMAP_DSS_CHANNEL_LCD2 &&
+ channel != OMAP_DSS_CHANNEL_LCD3);
b = 1;
dsidev = dsi_get_dsidev_from_id(1);
dsi_wait_pll_hsdiv_dispc_active(dsidev);
@@ -398,10 +399,12 @@
return;
}
- pos = channel == OMAP_DSS_CHANNEL_LCD ? 0 : 12;
+ pos = channel == OMAP_DSS_CHANNEL_LCD ? 0 :
+ (channel == OMAP_DSS_CHANNEL_LCD2 ? 12 : 19);
REG_FLD_MOD(DSS_CONTROL, b, pos, pos); /* LCDx_CLK_SWITCH */
- ix = channel == OMAP_DSS_CHANNEL_LCD ? 0 : 1;
+ ix = channel == OMAP_DSS_CHANNEL_LCD ? 0 :
+ (channel == OMAP_DSS_CHANNEL_LCD2 ? 1 : 2);
dss.lcd_clk_source[ix] = clk_src;
}
@@ -418,7 +421,8 @@
enum omap_dss_clk_source dss_get_lcd_clk_source(enum omap_channel channel)
{
if (dss_has_feature(FEAT_LCD_CLK_SRC)) {
- int ix = channel == OMAP_DSS_CHANNEL_LCD ? 0 : 1;
+ int ix = channel == OMAP_DSS_CHANNEL_LCD ? 0 :
+ (channel == OMAP_DSS_CHANNEL_LCD2 ? 1 : 2);
return dss.lcd_clk_source[ix];
} else {
/* LCD_CLK source is the same as DISPC_FCLK source for