dt-bindings: i2c: add support for 'i2c-arb' subnode
This gets rid of the need for a pointless 'reg' property for i2c
arbitrators.
I.e. this new and more compact style
some-arbitrator {
i2c-arb {
#address-cells = <1>;
#size-cells = <0>;
some-i2c-device@50 {
reg = <0x50>;
};
};
};
instead of the old
some-arbitrator {
#address-cells = <1>;
#size-cells = <0>;
i2c@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
some-i2c-device@50 {
reg = <0x50>;
};
};
};
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Peter Rosin <peda@axentia.se>
diff --git a/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt b/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt
index 71191ff..248a155 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt
@@ -44,8 +44,7 @@
- our-claim-gpio: The GPIO that we use to claim the bus.
- their-claim-gpios: The GPIOs that the other sides use to claim the bus.
Note that some implementations may only support a single other master.
-- Standard I2C mux properties. See i2c-mux.txt in this directory.
-- Single I2C child bus node at reg 0. See i2c-mux.txt in this directory.
+- I2C arbitration bus node. See i2c-arb.txt in this directory.
Optional properties:
- slew-delay-us: microseconds to wait for a GPIO to go high. Default is 10 us.
@@ -63,8 +62,6 @@
i2c-arbitrator {
compatible = "i2c-arb-gpio-challenge";
- #address-cells = <1>;
- #size-cells = <0>;
i2c-parent = <&{/i2c@12CA0000}>;
@@ -74,8 +71,7 @@
wait-retry-us = <3000>;
wait-free-us = <50000>;
- i2c@0 {
- reg = <0>;
+ i2c-arb {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/i2c/i2c-arb.txt b/Documentation/devicetree/bindings/i2c/i2c-arb.txt
new file mode 100644
index 0000000..59abf92
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-arb.txt
@@ -0,0 +1,35 @@
+Common i2c arbitration bus properties.
+
+- i2c-arb child node
+
+Required properties for the i2c-arb child node:
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Optional properties for i2c-arb child node:
+- Child nodes conforming to i2c bus binding
+
+
+Example :
+
+ /*
+ An NXP pca9541 I2C bus master selector at address 0x74
+ with a NXP pca8574 GPIO expander attached.
+ */
+
+ arb@74 {
+ compatible = "nxp,pca9541";
+ reg = <0x74>;
+
+ i2c-arb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio@38 {
+ compatible = "nxp,pca8574";
+ reg = <0x38>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 0bbe4b1..cde3e72 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5667,6 +5667,7 @@
F: Documentation/i2c/i2c-topology
F: Documentation/i2c/muxes/
F: Documentation/devicetree/bindings/i2c/i2c-mux*
+F: Documentation/devicetree/bindings/i2c/i2c-arb*
F: drivers/i2c/i2c-mux.c
F: drivers/i2c/muxes/
F: include/linux/i2c-mux.h