diff --git a/.mailmap b/.mailmap
index 093a8ac..de22dae 100644
--- a/.mailmap
+++ b/.mailmap
@@ -88,6 +88,7 @@
 Kenneth W Chen <kenneth.w.chen@intel.com>
 Konstantin Khlebnikov <koct9i@gmail.com> <k.khlebnikov@samsung.com>
 Koushik <raghavendra.koushik@neterion.com>
+Krzysztof Kozlowski <krzk@kernel.org> <k.kozlowski@samsung.com>
 Krzysztof Kozlowski <krzk@kernel.org> <k.kozlowski.k@gmail.com>
 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
 Leonid I Ananiev <leonid.i.ananiev@intel.com>
diff --git a/Documentation/arm/CCN.txt b/Documentation/arm/CCN.txt
index ffca443..15cdb7b 100644
--- a/Documentation/arm/CCN.txt
+++ b/Documentation/arm/CCN.txt
@@ -18,13 +18,17 @@
 directory provides configuration templates for all documented
 events, that can be used with perf tool. For example "xp_valid_flit"
 is an equivalent of "type=0x8,event=0x4". Other parameters must be
-explicitly specified. For events originating from device, "node"
-defines its index. All crosspoint events require "xp" (index),
-"port" (device port number) and "vc" (virtual channel ID) and
-"dir" (direction). Watchpoints (special "event" value 0xfe) also
-require comparator values ("cmp_l" and "cmp_h") and "mask", being
-index of the comparator mask.
+explicitly specified.
 
+For events originating from device, "node" defines its index.
+
+Crosspoint PMU events require "xp" (index), "bus" (bus number)
+and "vc" (virtual channel ID).
+
+Crosspoint watchpoint-based events (special "event" value 0xfe)
+require "xp" and "vc" as as above plus "port" (device port index),
+"dir" (transmit/receive direction), comparator values ("cmp_l"
+and "cmp_h") and "mask", being index of the comparator mask.
 Masks are defined separately from the event description
 (due to limited number of the config values) in the "cmp_mask"
 directory, with first 8 configurable by user and additional
diff --git a/MAINTAINERS b/MAINTAINERS
index 1fbd77d..6781a3f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1624,7 +1624,7 @@
 
 ARM/SAMSUNG EXYNOS ARM ARCHITECTURES
 M:	Kukjin Kim <kgene@kernel.org>
-M:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
 S:	Maintained
@@ -1831,6 +1831,7 @@
 ARM/UNIPHIER ARCHITECTURE
 M:	Masahiro Yamada <yamada.masahiro@socionext.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier.git
 S:	Maintained
 F:	arch/arm/boot/dts/uniphier*
 F:	arch/arm/include/asm/hardware/cache-uniphier.h
@@ -7464,7 +7465,8 @@
 F:	sound/soc/codecs/max9860.*
 
 MAXIM MUIC CHARGER DRIVERS FOR EXYNOS BASED BOARDS
-M:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
+M:	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
 L:	linux-pm@vger.kernel.org
 S:	Supported
 F:	drivers/power/max14577_charger.c
@@ -7480,7 +7482,8 @@
 
 MAXIM PMIC AND MUIC DRIVERS FOR EXYNOS BASED BOARDS
 M:	Chanwoo Choi <cw00.choi@samsung.com>
-M:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
+M:	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
 L:	linux-kernel@vger.kernel.org
 S:	Supported
 F:	drivers/*/max14577*.c
@@ -9246,7 +9249,7 @@
 
 PIN CONTROLLER - SAMSUNG
 M:	Tomasz Figa <tomasz.figa@gmail.com>
-M:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
 M:	Sylwester Nawrocki <s.nawrocki@samsung.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
@@ -10179,7 +10182,7 @@
 F:	drivers/platform/x86/samsung-laptop.c
 
 SAMSUNG AUDIO (ASoC) DRIVERS
-M:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
 M:	Sangbeom Kim <sbkim73@samsung.com>
 M:	Sylwester Nawrocki <s.nawrocki@samsung.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
@@ -10194,7 +10197,8 @@
 
 SAMSUNG MULTIFUNCTION PMIC DEVICE DRIVERS
 M:	Sangbeom Kim <sbkim73@samsung.com>
-M:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
+M:	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
 L:	linux-kernel@vger.kernel.org
 L:	linux-samsung-soc@vger.kernel.org
 S:	Supported
diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi
index c8609d8..b689172 100644
--- a/arch/arm/boot/dts/am335x-baltos.dtsi
+++ b/arch/arm/boot/dts/am335x-baltos.dtsi
@@ -226,7 +226,7 @@
 
 		#address-cells = <1>;
 		#size-cells = <1>;
-		elm_id = <&elm>;
+		ti,elm-id = <&elm>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi
index df63484..e7d9ca1 100644
--- a/arch/arm/boot/dts/am335x-igep0033.dtsi
+++ b/arch/arm/boot/dts/am335x-igep0033.dtsi
@@ -161,7 +161,7 @@
 
 		#address-cells = <1>;
 		#size-cells = <1>;
-		elm_id = <&elm>;
+		ti,elm-id = <&elm>;
 
 		/* MTD partition table */
 		partition@0 {
diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi
index 86f7731..1263c9d 100644
--- a/arch/arm/boot/dts/am335x-phycore-som.dtsi
+++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi
@@ -197,7 +197,7 @@
 		gpmc,wr-access-ns = <30>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 
-		elm_id = <&elm>;
+		ti,elm-id = <&elm>;
 
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts
index 2e0556a..d3e6bd8 100644
--- a/arch/arm/boot/dts/armada-388-clearfog.dts
+++ b/arch/arm/boot/dts/armada-388-clearfog.dts
@@ -390,12 +390,12 @@
 
 			port@0 {
 				reg = <0>;
-				label = "lan1";
+				label = "lan5";
 			};
 
 			port@1 {
 				reg = <1>;
-				label = "lan2";
+				label = "lan4";
 			};
 
 			port@2 {
@@ -405,12 +405,12 @@
 
 			port@3 {
 				reg = <3>;
-				label = "lan4";
+				label = "lan2";
 			};
 
 			port@4 {
 				reg = <4>;
-				label = "lan5";
+				label = "lan1";
 			};
 
 			port@5 {
diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
index d949931..f6d1352 100644
--- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -447,14 +447,11 @@
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <0 4>;
 	samsung,dw-mshc-ddr-timing = <0 2>;
-	samsung,dw-mshc-hs400-timing = <0 2>;
-	samsung,read-strobe-delay = <90>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd>;
 	bus-width = <8>;
 	cap-mmc-highspeed;
 	mmc-hs200-1_8v;
-	mmc-hs400-1_8v;
 	vmmc-supply = <&ldo20_reg>;
 	vqmmc-supply = <&ldo11_reg>;
 };
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index b620ac8..b13b0b2 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -243,7 +243,7 @@
 					clocks = <&clks IMX6QDL_CLK_SPDIF_GCLK>, <&clks IMX6QDL_CLK_OSC>,
 						 <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_ASRC>,
 						 <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_ESAI_EXTAL>,
-						 <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_MLB>,
+						 <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_DUMMY>,
 						 <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_SPBA>;
 					clock-names = "core",  "rxtx0",
 						      "rxtx1", "rxtx2",
diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts
index 96ea936..240a286 100644
--- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts
@@ -64,7 +64,7 @@
 	cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>;
 	no-1-8-v;
 	keep-power-in-suspend;
-	enable-sdio-wakup;
+	wakeup-source;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 95ee268..2f33c46 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -131,7 +131,7 @@
 		ti,y-min = /bits/ 16 <0>;
 		ti,y-max = /bits/ 16 <0>;
 		ti,pressure-max = /bits/ 16 <0>;
-		ti,x-plat-ohms = /bits/ 16 <400>;
+		ti,x-plate-ohms = /bits/ 16 <400>;
 		wakeup-source;
 	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts
index ef84d86..5bf6289 100644
--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
@@ -113,7 +113,7 @@
 
 	partition@e0000 {
 		label = "u-boot environment";
-		reg = <0xe0000 0x100000>;
+		reg = <0xe0000 0x20000>;
 	};
 
 	partition@100000 {
diff --git a/arch/arm/boot/dts/kirkwood-openrd.dtsi b/arch/arm/boot/dts/kirkwood-openrd.dtsi
index e4ecab1..7175511 100644
--- a/arch/arm/boot/dts/kirkwood-openrd.dtsi
+++ b/arch/arm/boot/dts/kirkwood-openrd.dtsi
@@ -116,6 +116,10 @@
 	};
 };
 
+&pciec {
+	status = "okay";
+};
+
 &pcie0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi
index 365f39ff..0ff1c2d 100644
--- a/arch/arm/boot/dts/logicpd-som-lv.dtsi
+++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi
@@ -35,10 +35,15 @@
 	ranges = <0 0 0x00000000 0x1000000>;	/* CS0: 16MB for NAND */
 
 	nand@0,0 {
-		linux,mtd-name = "micron,mt29f4g16abbda3w";
+		compatible = "ti,omap2-nand";
 		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		linux,mtd-name = "micron,mt29f4g16abbda3w";
 		nand-bus-width = <16>;
 		ti,nand-ecc-opt = "bch8";
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		gpmc,sync-clk-ps = <0>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <44>;
@@ -54,10 +59,6 @@
 		gpmc,wr-access-ns = <40>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 		gpmc,device-width = <2>;
-
-		gpmc,page-burst-access-ns = <5>;
-		gpmc,cycle2cycle-delay-ns = <50>;
-
 		#address-cells = <1>;
 		#size-cells = <1>;
 
diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
index 5e9a13c..1c2c746 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
+++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
@@ -46,6 +46,7 @@
 		linux,mtd-name = "micron,mt29f4g16abbda3w";
 		nand-bus-width = <16>;
 		ti,nand-ecc-opt = "bch8";
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		gpmc,sync-clk-ps = <0>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <44>;
diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi
index de256fa..3e946ca 100644
--- a/arch/arm/boot/dts/omap3-overo-base.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-base.dtsi
@@ -223,7 +223,9 @@
 };
 
 &gpmc {
-	ranges = <0 0 0x00000000 0x20000000>;
+	ranges = <0 0 0x30000000 0x1000000>,	/* CS0 */
+		 <4 0 0x2b000000 0x1000000>,	/* CS4 */
+		 <5 0 0x2c000000 0x1000000>;	/* CS5 */
 
 	nand@0,0 {
 		compatible = "ti,omap2-nand";
diff --git a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
index 7df2792..4f4c6ef 100644
--- a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
@@ -55,8 +55,6 @@
 #include "omap-gpmc-smsc9221.dtsi"
 
 &gpmc {
-	ranges = <5 0 0x2c000000 0x1000000>;	/* CS5 */
-
 	ethernet@gpmc {
 		reg = <5 0 0xff>;
 		interrupt-parent = <&gpio6>;
diff --git a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
index 9e24b6a..1b304e2 100644
--- a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
@@ -27,8 +27,6 @@
 #include "omap-gpmc-smsc9221.dtsi"
 
 &gpmc {
-	ranges = <5 0 0x2c000000 0x1000000>;	/* CS5 */
-
 	ethernet@gpmc {
 		reg = <5 0 0xff>;
 		interrupt-parent = <&gpio6>;
diff --git a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
index 334109e..82e98ee 100644
--- a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
@@ -15,9 +15,6 @@
 #include "omap-gpmc-smsc9221.dtsi"
 
 &gpmc {
-	ranges = <4 0 0x2b000000 0x1000000>,	/* CS4 */
-		 <5 0 0x2c000000 0x1000000>;	/* CS5 */
-
 	smsc1: ethernet@gpmc {
 		reg = <5 0 0xff>;
 		interrupt-parent = <&gpio6>;
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index e012890..a17ba02 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -84,7 +84,7 @@
 			trips {
 				cpu_alert0: cpu_alert0 {
 					/* milliCelsius */
-					temperature = <850000>;
+					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index 1dfc492..1444fbd 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -897,7 +897,7 @@
 		palmas: tps65913@58 {
 			compatible = "ti,palmas";
 			reg = <0x58>;
-			interrupts = <0 86 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
 
 			#interrupt-cells = <2>;
 			interrupt-controller;
diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts
index 70cf409..966a7fc 100644
--- a/arch/arm/boot/dts/tegra114-roth.dts
+++ b/arch/arm/boot/dts/tegra114-roth.dts
@@ -802,7 +802,7 @@
 		palmas: pmic@58 {
 			compatible = "ti,palmas";
 			reg = <0x58>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 
 			#interrupt-cells = <2>;
 			interrupt-controller;
diff --git a/arch/arm/boot/dts/tegra114-tn7.dts b/arch/arm/boot/dts/tegra114-tn7.dts
index 17dd145..a161fa1 100644
--- a/arch/arm/boot/dts/tegra114-tn7.dts
+++ b/arch/arm/boot/dts/tegra114-tn7.dts
@@ -63,7 +63,7 @@
 		palmas: pmic@58 {
 			compatible = "ti,palmas";
 			reg = <0x58>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 
 			#interrupt-cells = <2>;
 			interrupt-controller;
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index 6403e0d..e52b824 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -1382,7 +1382,7 @@
 	 *   Pin 41: BR_UART1_TXD
 	 *   Pin 44: BR_UART1_RXD
 	 */
-	serial@0,70006000 {
+	serial@70006000 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
 		status = "okay";
 	};
@@ -1394,7 +1394,7 @@
 	 *   Pin 71: UART2_CTS_L
 	 *   Pin 74: UART2_RTS_L
 	 */
-	serial@0,70006040 {
+	serial@70006040 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
 		status = "okay";
 	};
diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c
index 5d9bfab..6bb7d9c 100644
--- a/arch/arm/mach-imx/mach-imx6ul.c
+++ b/arch/arm/mach-imx/mach-imx6ul.c
@@ -64,6 +64,7 @@
 	if (parent == NULL)
 		pr_warn("failed to initialize soc device\n");
 
+	of_platform_default_populate(NULL, NULL, parent);
 	imx6ul_enet_init();
 	imx_anatop_init();
 	imx6ul_pm_init();
diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
index 58924b3..fe708e2 100644
--- a/arch/arm/mach-imx/pm-imx6.c
+++ b/arch/arm/mach-imx/pm-imx6.c
@@ -295,7 +295,7 @@
 		val &= ~BM_CLPCR_SBYOS;
 		if (cpu_is_imx6sl())
 			val |= BM_CLPCR_BYPASS_PMIC_READY;
-		if (cpu_is_imx6sl() || cpu_is_imx6sx())
+		if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul())
 			val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
 		else
 			val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
@@ -310,7 +310,7 @@
 		val |= 0x3 << BP_CLPCR_STBY_COUNT;
 		val |= BM_CLPCR_VSTBY;
 		val |= BM_CLPCR_SBYOS;
-		if (cpu_is_imx6sl())
+		if (cpu_is_imx6sl() || cpu_is_imx6sx())
 			val |= BM_CLPCR_BYPASS_PMIC_READY;
 		if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul())
 			val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c
index c073fb5..6f2d0ae 100644
--- a/arch/arm/mach-omap2/cm33xx.c
+++ b/arch/arm/mach-omap2/cm33xx.c
@@ -220,9 +220,6 @@
 {
 	int i = 0;
 
-	if (!clkctrl_offs)
-		return 0;
-
 	omap_test_timeout(_is_module_ready(inst, clkctrl_offs),
 			  MAX_MODULE_READY_TIME, i);
 
@@ -246,9 +243,6 @@
 {
 	int i = 0;
 
-	if (!clkctrl_offs)
-		return 0;
-
 	omap_test_timeout((_clkctrl_idlest(inst, clkctrl_offs) ==
 				CLKCTRL_IDLEST_DISABLED),
 				MAX_MODULE_READY_TIME, i);
diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c
index 2c0e07e..2ab27ad 100644
--- a/arch/arm/mach-omap2/cminst44xx.c
+++ b/arch/arm/mach-omap2/cminst44xx.c
@@ -278,9 +278,6 @@
 {
 	int i = 0;
 
-	if (!clkctrl_offs)
-		return 0;
-
 	omap_test_timeout(_is_module_ready(part, inst, clkctrl_offs),
 			  MAX_MODULE_READY_TIME, i);
 
@@ -304,9 +301,6 @@
 {
 	int i = 0;
 
-	if (!clkctrl_offs)
-		return 0;
-
 	omap_test_timeout((_clkctrl_idlest(part, inst, clkctrl_offs) ==
 			   CLKCTRL_IDLEST_DISABLED),
 			  MAX_MODULE_DISABLE_TIME, i);
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 5b70938..1052b29 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1053,6 +1053,10 @@
 	if (oh->flags & HWMOD_NO_IDLEST)
 		return 0;
 
+	if (!oh->prcm.omap4.clkctrl_offs &&
+	    !(oh->prcm.omap4.flags & HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET))
+		return 0;
+
 	return omap_cm_wait_module_idle(oh->clkdm->prcm_partition,
 					oh->clkdm->cm_inst,
 					oh->prcm.omap4.clkctrl_offs, 0);
@@ -2971,6 +2975,10 @@
 	if (!_find_mpu_rt_port(oh))
 		return 0;
 
+	if (!oh->prcm.omap4.clkctrl_offs &&
+	    !(oh->prcm.omap4.flags & HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET))
+		return 0;
+
 	/* XXX check module SIDLEMODE, hardreset status */
 
 	return omap_cm_wait_module_ready(oh->clkdm->prcm_partition,
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index 4041bad..7890401 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -443,8 +443,12 @@
  * HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT: Some IP blocks don't have a PRCM
  *     module-level context loss register associated with them; this
  *     flag bit should be set in those cases
+ * HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET: Some IP blocks have a valid CLKCTRL
+ *	offset of zero; this flag bit should be set in those cases to
+ *	distinguish from hwmods that have no clkctrl offset.
  */
 #define HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT		(1 << 0)
+#define HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET		(1 << 1)
 
 /**
  * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
index 55c5878..e2d84aa 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
@@ -29,6 +29,7 @@
 #define CLKCTRL(oh, clkctrl) ((oh).prcm.omap4.clkctrl_offs = (clkctrl))
 #define RSTCTRL(oh, rstctrl) ((oh).prcm.omap4.rstctrl_offs = (rstctrl))
 #define RSTST(oh, rstst) ((oh).prcm.omap4.rstst_offs = (rstst))
+#define PRCM_FLAGS(oh, flag) ((oh).prcm.omap4.flags = (flag))
 
 /*
  * 'l3' class
@@ -1296,6 +1297,7 @@
 	CLKCTRL(am33xx_i2c1_hwmod, AM33XX_CM_WKUP_I2C0_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_wd_timer1_hwmod, AM33XX_CM_WKUP_WDT1_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_rtc_hwmod, AM33XX_CM_RTC_RTC_CLKCTRL_OFFSET);
+	PRCM_FLAGS(am33xx_rtc_hwmod, HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_mmc2_hwmod, AM33XX_CM_PER_MMC2_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_gpmc_hwmod, AM33XX_CM_PER_GPMC_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_l4_ls_hwmod, AM33XX_CM_PER_L4LS_CLKCTRL_OFFSET);
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index d72ee61..1cc4a6f 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -722,8 +722,20 @@
  * display serial interface controller
  */
 
+static struct omap_hwmod_class_sysconfig omap3xxx_dsi_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
 static struct omap_hwmod_class omap3xxx_dsi_hwmod_class = {
 	.name = "dsi",
+	.sysc	= &omap3xxx_dsi_sysc,
 };
 
 static struct omap_hwmod_irq_info omap3xxx_dsi1_irqs[] = {
diff --git a/drivers/bus/arm-cci.c b/drivers/bus/arm-cci.c
index 5755907f..ffa7c9d 100644
--- a/drivers/bus/arm-cci.c
+++ b/drivers/bus/arm-cci.c
@@ -551,7 +551,7 @@
 	CCI5xx_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_wrq, 0xB),
 	CCI5xx_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_cd_hs, 0xC),
 	CCI5xx_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_rq_stall_addr_hazard, 0xD),
-	CCI5xx_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snopp_rq_stall_tt_full, 0xE),
+	CCI5xx_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_rq_stall_tt_full, 0xE),
 	CCI5xx_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_rq_tzmp1_prot, 0xF),
 	NULL
 };
diff --git a/drivers/bus/arm-ccn.c b/drivers/bus/arm-ccn.c
index 97a9185..884c030 100644
--- a/drivers/bus/arm-ccn.c
+++ b/drivers/bus/arm-ccn.c
@@ -187,6 +187,7 @@
 	struct arm_ccn_component *xp;
 
 	struct arm_ccn_dt dt;
+	int mn_id;
 };
 
 static DEFINE_MUTEX(arm_ccn_mutex);
@@ -212,6 +213,7 @@
 #define CCN_CONFIG_TYPE(_config)	(((_config) >> 8) & 0xff)
 #define CCN_CONFIG_EVENT(_config)	(((_config) >> 16) & 0xff)
 #define CCN_CONFIG_PORT(_config)	(((_config) >> 24) & 0x3)
+#define CCN_CONFIG_BUS(_config)		(((_config) >> 24) & 0x3)
 #define CCN_CONFIG_VC(_config)		(((_config) >> 26) & 0x7)
 #define CCN_CONFIG_DIR(_config)		(((_config) >> 29) & 0x1)
 #define CCN_CONFIG_MASK(_config)	(((_config) >> 30) & 0xf)
@@ -241,6 +243,7 @@
 static CCN_FORMAT_ATTR(type, "config:8-15");
 static CCN_FORMAT_ATTR(event, "config:16-23");
 static CCN_FORMAT_ATTR(port, "config:24-25");
+static CCN_FORMAT_ATTR(bus, "config:24-25");
 static CCN_FORMAT_ATTR(vc, "config:26-28");
 static CCN_FORMAT_ATTR(dir, "config:29-29");
 static CCN_FORMAT_ATTR(mask, "config:30-33");
@@ -253,6 +256,7 @@
 	&arm_ccn_pmu_format_attr_type.attr.attr,
 	&arm_ccn_pmu_format_attr_event.attr.attr,
 	&arm_ccn_pmu_format_attr_port.attr.attr,
+	&arm_ccn_pmu_format_attr_bus.attr.attr,
 	&arm_ccn_pmu_format_attr_vc.attr.attr,
 	&arm_ccn_pmu_format_attr_dir.attr.attr,
 	&arm_ccn_pmu_format_attr_mask.attr.attr,
@@ -328,6 +332,7 @@
 static ssize_t arm_ccn_pmu_event_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
+	struct arm_ccn *ccn = pmu_to_arm_ccn(dev_get_drvdata(dev));
 	struct arm_ccn_pmu_event *event = container_of(attr,
 			struct arm_ccn_pmu_event, attr);
 	ssize_t res;
@@ -349,10 +354,17 @@
 		break;
 	case CCN_TYPE_XP:
 		res += snprintf(buf + res, PAGE_SIZE - res,
-				",xp=?,port=?,vc=?,dir=?");
+				",xp=?,vc=?");
 		if (event->event == CCN_EVENT_WATCHPOINT)
 			res += snprintf(buf + res, PAGE_SIZE - res,
-					",cmp_l=?,cmp_h=?,mask=?");
+					",port=?,dir=?,cmp_l=?,cmp_h=?,mask=?");
+		else
+			res += snprintf(buf + res, PAGE_SIZE - res,
+					",bus=?");
+
+		break;
+	case CCN_TYPE_MN:
+		res += snprintf(buf + res, PAGE_SIZE - res, ",node=%d", ccn->mn_id);
 		break;
 	default:
 		res += snprintf(buf + res, PAGE_SIZE - res, ",node=?");
@@ -383,9 +395,9 @@
 }
 
 static struct arm_ccn_pmu_event arm_ccn_pmu_events[] = {
-	CCN_EVENT_MN(eobarrier, "dir=0,vc=0,cmp_h=0x1c00", CCN_IDX_MASK_OPCODE),
-	CCN_EVENT_MN(ecbarrier, "dir=0,vc=0,cmp_h=0x1e00", CCN_IDX_MASK_OPCODE),
-	CCN_EVENT_MN(dvmop, "dir=0,vc=0,cmp_h=0x2800", CCN_IDX_MASK_OPCODE),
+	CCN_EVENT_MN(eobarrier, "dir=1,vc=0,cmp_h=0x1c00", CCN_IDX_MASK_OPCODE),
+	CCN_EVENT_MN(ecbarrier, "dir=1,vc=0,cmp_h=0x1e00", CCN_IDX_MASK_OPCODE),
+	CCN_EVENT_MN(dvmop, "dir=1,vc=0,cmp_h=0x2800", CCN_IDX_MASK_OPCODE),
 	CCN_EVENT_HNI(txdatflits, "dir=1,vc=3", CCN_IDX_MASK_ANY),
 	CCN_EVENT_HNI(rxdatflits, "dir=0,vc=3", CCN_IDX_MASK_ANY),
 	CCN_EVENT_HNI(txreqflits, "dir=1,vc=0", CCN_IDX_MASK_ANY),
@@ -733,9 +745,10 @@
 
 	if (has_branch_stack(event) || event->attr.exclude_user ||
 			event->attr.exclude_kernel || event->attr.exclude_hv ||
-			event->attr.exclude_idle) {
+			event->attr.exclude_idle || event->attr.exclude_host ||
+			event->attr.exclude_guest) {
 		dev_warn(ccn->dev, "Can't exclude execution levels!\n");
-		return -EOPNOTSUPP;
+		return -EINVAL;
 	}
 
 	if (event->cpu < 0) {
@@ -759,6 +772,12 @@
 
 	/* Validate node/xp vs topology */
 	switch (type) {
+	case CCN_TYPE_MN:
+		if (node_xp != ccn->mn_id) {
+			dev_warn(ccn->dev, "Invalid MN ID %d!\n", node_xp);
+			return -EINVAL;
+		}
+		break;
 	case CCN_TYPE_XP:
 		if (node_xp >= ccn->num_xps) {
 			dev_warn(ccn->dev, "Invalid XP ID %d!\n", node_xp);
@@ -886,6 +905,10 @@
 	struct arm_ccn_component *xp;
 	u32 val, dt_cfg;
 
+	/* Nothing to do for cycle counter */
+	if (hw->idx == CCN_IDX_PMU_CYCLE_COUNTER)
+		return;
+
 	if (CCN_CONFIG_TYPE(event->attr.config) == CCN_TYPE_XP)
 		xp = &ccn->xp[CCN_CONFIG_XP(event->attr.config)];
 	else
@@ -917,38 +940,17 @@
 			arm_ccn_pmu_read_counter(ccn, hw->idx));
 	hw->state = 0;
 
-	/*
-	 * Pin the timer, so that the overflows are handled by the chosen
-	 * event->cpu (this is the same one as presented in "cpumask"
-	 * attribute).
-	 */
-	if (!ccn->irq)
-		hrtimer_start(&ccn->dt.hrtimer, arm_ccn_pmu_timer_period(),
-				HRTIMER_MODE_REL_PINNED);
-
 	/* Set the DT bus input, engaging the counter */
 	arm_ccn_pmu_xp_dt_config(event, 1);
 }
 
 static void arm_ccn_pmu_event_stop(struct perf_event *event, int flags)
 {
-	struct arm_ccn *ccn = pmu_to_arm_ccn(event->pmu);
 	struct hw_perf_event *hw = &event->hw;
-	u64 timeout;
 
 	/* Disable counting, setting the DT bus to pass-through mode */
 	arm_ccn_pmu_xp_dt_config(event, 0);
 
-	if (!ccn->irq)
-		hrtimer_cancel(&ccn->dt.hrtimer);
-
-	/* Let the DT bus drain */
-	timeout = arm_ccn_pmu_read_counter(ccn, CCN_IDX_PMU_CYCLE_COUNTER) +
-			ccn->num_xps;
-	while (arm_ccn_pmu_read_counter(ccn, CCN_IDX_PMU_CYCLE_COUNTER) <
-			timeout)
-		cpu_relax();
-
 	if (flags & PERF_EF_UPDATE)
 		arm_ccn_pmu_event_update(event);
 
@@ -988,7 +990,7 @@
 
 	/* Comparison values */
 	writel(cmp_l & 0xffffffff, source->base + CCN_XP_DT_CMP_VAL_L(wp));
-	writel((cmp_l >> 32) & 0xefffffff,
+	writel((cmp_l >> 32) & 0x7fffffff,
 			source->base + CCN_XP_DT_CMP_VAL_L(wp) + 4);
 	writel(cmp_h & 0xffffffff, source->base + CCN_XP_DT_CMP_VAL_H(wp));
 	writel((cmp_h >> 32) & 0x0fffffff,
@@ -996,7 +998,7 @@
 
 	/* Mask */
 	writel(mask_l & 0xffffffff, source->base + CCN_XP_DT_CMP_MASK_L(wp));
-	writel((mask_l >> 32) & 0xefffffff,
+	writel((mask_l >> 32) & 0x7fffffff,
 			source->base + CCN_XP_DT_CMP_MASK_L(wp) + 4);
 	writel(mask_h & 0xffffffff, source->base + CCN_XP_DT_CMP_MASK_H(wp));
 	writel((mask_h >> 32) & 0x0fffffff,
@@ -1014,7 +1016,7 @@
 	hw->event_base = CCN_XP_DT_CONFIG__DT_CFG__XP_PMU_EVENT(hw->config_base);
 
 	id = (CCN_CONFIG_VC(event->attr.config) << 4) |
-			(CCN_CONFIG_PORT(event->attr.config) << 3) |
+			(CCN_CONFIG_BUS(event->attr.config) << 3) |
 			(CCN_CONFIG_EVENT(event->attr.config) << 0);
 
 	val = readl(source->base + CCN_XP_PMU_EVENT_SEL);
@@ -1099,15 +1101,31 @@
 	spin_unlock(&ccn->dt.config_lock);
 }
 
+static int arm_ccn_pmu_active_counters(struct arm_ccn *ccn)
+{
+	return bitmap_weight(ccn->dt.pmu_counters_mask,
+			     CCN_NUM_PMU_EVENT_COUNTERS + 1);
+}
+
 static int arm_ccn_pmu_event_add(struct perf_event *event, int flags)
 {
 	int err;
 	struct hw_perf_event *hw = &event->hw;
+	struct arm_ccn *ccn = pmu_to_arm_ccn(event->pmu);
 
 	err = arm_ccn_pmu_event_alloc(event);
 	if (err)
 		return err;
 
+	/*
+	 * Pin the timer, so that the overflows are handled by the chosen
+	 * event->cpu (this is the same one as presented in "cpumask"
+	 * attribute).
+	 */
+	if (!ccn->irq && arm_ccn_pmu_active_counters(ccn) == 1)
+		hrtimer_start(&ccn->dt.hrtimer, arm_ccn_pmu_timer_period(),
+			      HRTIMER_MODE_REL_PINNED);
+
 	arm_ccn_pmu_event_config(event);
 
 	hw->state = PERF_HES_STOPPED;
@@ -1120,9 +1138,14 @@
 
 static void arm_ccn_pmu_event_del(struct perf_event *event, int flags)
 {
+	struct arm_ccn *ccn = pmu_to_arm_ccn(event->pmu);
+
 	arm_ccn_pmu_event_stop(event, PERF_EF_UPDATE);
 
 	arm_ccn_pmu_event_release(event);
+
+	if (!ccn->irq && arm_ccn_pmu_active_counters(ccn) == 0)
+		hrtimer_cancel(&ccn->dt.hrtimer);
 }
 
 static void arm_ccn_pmu_event_read(struct perf_event *event)
@@ -1130,6 +1153,24 @@
 	arm_ccn_pmu_event_update(event);
 }
 
+static void arm_ccn_pmu_enable(struct pmu *pmu)
+{
+	struct arm_ccn *ccn = pmu_to_arm_ccn(pmu);
+
+	u32 val = readl(ccn->dt.base + CCN_DT_PMCR);
+	val |= CCN_DT_PMCR__PMU_EN;
+	writel(val, ccn->dt.base + CCN_DT_PMCR);
+}
+
+static void arm_ccn_pmu_disable(struct pmu *pmu)
+{
+	struct arm_ccn *ccn = pmu_to_arm_ccn(pmu);
+
+	u32 val = readl(ccn->dt.base + CCN_DT_PMCR);
+	val &= ~CCN_DT_PMCR__PMU_EN;
+	writel(val, ccn->dt.base + CCN_DT_PMCR);
+}
+
 static irqreturn_t arm_ccn_pmu_overflow_handler(struct arm_ccn_dt *dt)
 {
 	u32 pmovsr = readl(dt->base + CCN_DT_PMOVSR);
@@ -1252,6 +1293,8 @@
 		.start = arm_ccn_pmu_event_start,
 		.stop = arm_ccn_pmu_event_stop,
 		.read = arm_ccn_pmu_event_read,
+		.pmu_enable = arm_ccn_pmu_enable,
+		.pmu_disable = arm_ccn_pmu_disable,
 	};
 
 	/* No overflow interrupt? Have to use a timer instead. */
@@ -1361,6 +1404,8 @@
 
 	switch (type) {
 	case CCN_TYPE_MN:
+		ccn->mn_id = id;
+		return 0;
 	case CCN_TYPE_DT:
 		return 0;
 	case CCN_TYPE_XP:
@@ -1471,8 +1516,9 @@
 		/* Can set 'disable' bits, so can acknowledge interrupts */
 		writel(CCN_MN_ERRINT_STATUS__PMU_EVENTS__ENABLE,
 				ccn->base + CCN_MN_ERRINT_STATUS);
-		err = devm_request_irq(ccn->dev, irq, arm_ccn_irq_handler, 0,
-				dev_name(ccn->dev), ccn);
+		err = devm_request_irq(ccn->dev, irq, arm_ccn_irq_handler,
+				       IRQF_NOBALANCING | IRQF_NO_THREAD,
+				       dev_name(ccn->dev), ccn);
 		if (err)
 			return err;
 
diff --git a/drivers/bus/vexpress-config.c b/drivers/bus/vexpress-config.c
index c3cb76b..9efdf1d 100644
--- a/drivers/bus/vexpress-config.c
+++ b/drivers/bus/vexpress-config.c
@@ -178,6 +178,7 @@
 
 	parent = class_find_device(vexpress_config_class, NULL, bridge,
 			vexpress_config_node_match);
+	of_node_put(bridge);
 	if (WARN_ON(!parent))
 		return -ENODEV;
 
diff --git a/drivers/firmware/arm_scpi.c b/drivers/firmware/arm_scpi.c
index 4388937..ce2bc2a 100644
--- a/drivers/firmware/arm_scpi.c
+++ b/drivers/firmware/arm_scpi.c
@@ -709,9 +709,10 @@
 		struct mbox_client *cl = &pchan->cl;
 		struct device_node *shmem = of_parse_phandle(np, "shmem", idx);
 
-		if (of_address_to_resource(shmem, 0, &res)) {
+		ret = of_address_to_resource(shmem, 0, &res);
+		of_node_put(shmem);
+		if (ret) {
 			dev_err(dev, "failed to get SCPI payload mem resource\n");
-			ret = -EINVAL;
 			goto err;
 		}
 
diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
index 869c83f..f00f3e7 100644
--- a/drivers/memory/omap-gpmc.c
+++ b/drivers/memory/omap-gpmc.c
@@ -2185,7 +2185,7 @@
 	return 0;
 }
 
-static int gpmc_probe_dt_children(struct platform_device *pdev)
+static void gpmc_probe_dt_children(struct platform_device *pdev)
 {
 	int ret;
 	struct device_node *child;
@@ -2200,11 +2200,11 @@
 		else
 			ret = gpmc_probe_generic_child(pdev, child);
 
-		if (ret)
-			return ret;
+		if (ret) {
+			dev_err(&pdev->dev, "failed to probe DT child '%s': %d\n",
+				child->name, ret);
+		}
 	}
-
-	return 0;
 }
 #else
 static int gpmc_probe_dt(struct platform_device *pdev)
@@ -2212,9 +2212,8 @@
 	return 0;
 }
 
-static int gpmc_probe_dt_children(struct platform_device *pdev)
+static void gpmc_probe_dt_children(struct platform_device *pdev)
 {
-	return 0;
 }
 #endif /* CONFIG_OF */
 
@@ -2369,16 +2368,10 @@
 		goto setup_irq_failed;
 	}
 
-	rc = gpmc_probe_dt_children(pdev);
-	if (rc < 0) {
-		dev_err(gpmc->dev, "failed to probe DT children\n");
-		goto dt_children_failed;
-	}
+	gpmc_probe_dt_children(pdev);
 
 	return 0;
 
-dt_children_failed:
-	gpmc_free_irq(gpmc);
 setup_irq_failed:
 	gpmc_gpio_exit(gpmc);
 gpio_init_failed: