[SCSI] lpfc 8.2.2 : Rework the lpfc_printf_log() macro
Rework the lpfc_printf_log() macro so that logging is enabled on a
per-vport basis. Used to be on a physical-port basis, thus logging
with large numbers of vports became a mess. Required redefinition of
the macro, and an update of every use.
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 14fe6b0..2da75d8 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -49,9 +49,8 @@
lpfc_printf_log(phba, \
KERN_INFO, \
LOG_MBOX | LOG_SLI, \
- "%d (%d):0311 Mailbox command x%x cannot " \
+ "(%d):0311 Mailbox command x%x cannot " \
"issue Data: x%x x%x x%x\n", \
- phba->brd_no, \
pmbox->vport ? pmbox->vport->vpi : 0, \
pmbox->mb.mbxCommand, \
phba->pport->port_state, \
@@ -231,13 +230,11 @@
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
if (rc != MBX_SUCCESS) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "%d:0446 Adapter failed to init (%d), "
+ "0446 Adapter failed to init (%d), "
"mbxCmd x%x CFG_RING, mbxStatus x%x, "
"ring %d\n",
- phba->brd_no, rc,
- pmbox->mbxCommand,
- pmbox->mbxStatus,
- i);
+ rc, pmbox->mbxCommand,
+ pmbox->mbxStatus, i);
phba->link_state = LPFC_HBA_ERROR;
ret = -ENXIO;
break;
@@ -296,9 +293,9 @@
if (unlikely(pring->local_getidx >= max_cmd_idx)) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
- "%d:0315 Ring %d issue: portCmdGet %d "
+ "0315 Ring %d issue: portCmdGet %d "
"is bigger then cmd ring %d\n",
- phba->brd_no, pring->ringno,
+ pring->ringno,
pring->local_getidx, max_cmd_idx);
phba->link_state = LPFC_HBA_ERROR;
@@ -380,8 +377,8 @@
spin_unlock_irq(&phba->hbalock);
lpfc_printf_log(phba, KERN_ERR,LOG_SLI,
- "%d:0318 Failed to allocate IOTAG.last IOTAG is %d\n",
- phba->brd_no, psli->last_iotag);
+ "0318 Failed to allocate IOTAG.last IOTAG is %d\n",
+ psli->last_iotag);
return 0;
}
@@ -535,10 +532,9 @@
if (unlikely(hbqp->local_hbqGetIdx >= hbqp->entry_count)) {
lpfc_printf_log(phba, KERN_ERR,
LOG_SLI | LOG_VPORT,
- "%d:1802 HBQ %d: local_hbqGetIdx "
+ "1802 HBQ %d: local_hbqGetIdx "
"%u is > than hbqp->entry_count %u\n",
- phba->brd_no, hbqno,
- hbqp->local_hbqGetIdx,
+ hbqno, hbqp->local_hbqGetIdx,
hbqp->entry_count);
phba->link_state = LPFC_HBA_ERROR;
@@ -666,9 +662,8 @@
}
}
lpfc_printf_log(phba, KERN_ERR, LOG_SLI | LOG_VPORT,
- "%d:1803 Bad hbq tag. Data: x%x x%x\n",
- phba->brd_no, tag,
- lpfc_hbq_defs[tag >> 16]->buffer_count);
+ "1803 Bad hbq tag. Data: x%x x%x\n",
+ tag, lpfc_hbq_defs[tag >> 16]->buffer_count);
return NULL;
}
@@ -845,12 +840,10 @@
*/
if (lpfc_sli_chk_mbx_command(pmbox->mbxCommand) ==
MBX_SHUTDOWN) {
-
/* Unknow mailbox command compl */
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
- "%d (%d):0323 Unknown Mailbox command "
+ "(%d):0323 Unknown Mailbox command "
"%x Cmpl\n",
- phba->brd_no,
pmb->vport ? pmb->vport->vpi : 0,
pmbox->mbxCommand);
phba->link_state = LPFC_HBA_ERROR;
@@ -865,10 +858,9 @@
/* Mbox cmd cmpl error - RETRYing */
lpfc_printf_log(phba, KERN_INFO,
LOG_MBOX | LOG_SLI,
- "%d (%d):0305 Mbox cmd cmpl "
+ "(%d):0305 Mbox cmd cmpl "
"error - RETRYing Data: x%x "
"x%x x%x x%x\n",
- phba->brd_no,
pmb->vport ? pmb->vport->vpi :0,
pmbox->mbxCommand,
pmbox->mbxStatus,
@@ -887,9 +879,8 @@
/* Mailbox cmd <cmd> Cmpl <cmpl> */
lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
- "%d (%d):0307 Mailbox cmd x%x Cmpl x%p "
+ "(%d):0307 Mailbox cmd x%x Cmpl x%p "
"Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x\n",
- phba->brd_no,
pmb->vport ? pmb->vport->vpi : 0,
pmbox->mbxCommand,
pmb->mbox_cmpl,
@@ -1004,12 +995,9 @@
/* Ring <ringno> handler: unexpected
Rctl <Rctl> Type <Type> received */
lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
- "%d:0313 Ring %d handler: unexpected Rctl x%x "
+ "0313 Ring %d handler: unexpected Rctl x%x "
"Type x%x received\n",
- phba->brd_no,
- pring->ringno,
- Rctl,
- Type);
+ pring->ringno, Rctl, Type);
}
return 1;
}
@@ -1032,10 +1020,9 @@
}
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
- "%d:0317 iotag x%x is out off "
+ "0317 iotag x%x is out off "
"range: max iotag x%x wd0 x%x\n",
- phba->brd_no, iotag,
- phba->sli.last_iotag,
+ iotag, phba->sli.last_iotag,
*(((uint32_t *) &prspiocb->iocb) + 7));
return NULL;
}
@@ -1083,18 +1070,16 @@
* Ring <ringno> handler: unexpected completion IoTag
* <IoTag>
*/
- lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
- "%d (%d):0322 Ring %d handler: "
- "unexpected completion IoTag x%x "
- "Data: x%x x%x x%x x%x\n",
- phba->brd_no,
- cmdiocbp->vport->vpi,
- pring->ringno,
- saveq->iocb.ulpIoTag,
- saveq->iocb.ulpStatus,
- saveq->iocb.un.ulpWord[4],
- saveq->iocb.ulpCommand,
- saveq->iocb.ulpContext);
+ lpfc_printf_vlog(cmdiocbp->vport, KERN_WARNING, LOG_SLI,
+ "0322 Ring %d handler: "
+ "unexpected completion IoTag x%x "
+ "Data: x%x x%x x%x x%x\n",
+ pring->ringno,
+ saveq->iocb.ulpIoTag,
+ saveq->iocb.ulpStatus,
+ saveq->iocb.un.ulpWord[4],
+ saveq->iocb.ulpCommand,
+ saveq->iocb.ulpContext);
}
}
@@ -1112,10 +1097,9 @@
* rsp ring <portRspMax>
*/
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
- "%d:0312 Ring %d handler: portRspPut %d "
+ "0312 Ring %d handler: portRspPut %d "
"is bigger then rsp ring %d\n",
- phba->brd_no, pring->ringno,
- le32_to_cpu(pgp->rspPutInx),
+ pring->ringno, le32_to_cpu(pgp->rspPutInx),
pring->numRiocb);
phba->link_state = LPFC_HBA_ERROR;
@@ -1185,9 +1169,9 @@
if (unlikely(irsp->ulpStatus)) {
/* Rsp ring <ringno> error: IOCB */
lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
- "%d:0326 Rsp Ring %d error: IOCB Data: "
+ "0326 Rsp Ring %d error: IOCB Data: "
"x%x x%x x%x x%x x%x x%x x%x x%x\n",
- phba->brd_no, pring->ringno,
+ pring->ringno,
irsp->un.ulpWord[0],
irsp->un.ulpWord[1],
irsp->un.ulpWord[2],
@@ -1207,9 +1191,9 @@
*/
if (unlikely(irsp->ulpCommand == CMD_XRI_ABORTED_CX)) {
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
- "%d:0314 IOCB cmd 0x%x"
- " processed. Skipping"
- " completion", phba->brd_no,
+ "0314 IOCB cmd 0x%x "
+ "processed. Skipping "
+ "completion",
irsp->ulpCommand);
break;
}
@@ -1234,10 +1218,9 @@
} else {
/* Unknown IOCB command */
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
- "%d:0321 Unknown IOCB command "
+ "0321 Unknown IOCB command "
"Data: x%x, x%x x%x x%x x%x\n",
- phba->brd_no, type,
- irsp->ulpCommand,
+ type, irsp->ulpCommand,
irsp->ulpStatus,
irsp->ulpIoTag,
irsp->ulpContext);
@@ -1361,9 +1344,9 @@
/* Rsp ring <ringno> error: IOCB */
lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
- "%d:0336 Rsp Ring %d error: IOCB Data: "
+ "0336 Rsp Ring %d error: IOCB Data: "
"x%x x%x x%x x%x x%x x%x x%x x%x\n",
- phba->brd_no, pring->ringno,
+ pring->ringno,
irsp->un.ulpWord[0],
irsp->un.ulpWord[1],
irsp->un.ulpWord[2],
@@ -1383,10 +1366,9 @@
*/
if (unlikely(irsp->ulpCommand == CMD_XRI_ABORTED_CX)) {
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
- "%d:0333 IOCB cmd 0x%x"
+ "0333 IOCB cmd 0x%x"
" processed. Skipping"
" completion\n",
- phba->brd_no,
irsp->ulpCommand);
break;
}
@@ -1423,10 +1405,9 @@
} else {
/* Unknown IOCB command */
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
- "%d:0334 Unknown IOCB command "
+ "0334 Unknown IOCB command "
"Data: x%x, x%x x%x x%x x%x\n",
- phba->brd_no, type,
- irsp->ulpCommand,
+ type, irsp->ulpCommand,
irsp->ulpStatus,
irsp->ulpIoTag,
irsp->ulpContext);
@@ -1504,10 +1485,9 @@
* rsp ring <portRspMax>
*/
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
- "%d:0303 Ring %d handler: portRspPut %d "
+ "0303 Ring %d handler: portRspPut %d "
"is bigger then rsp ring %d\n",
- phba->brd_no, pring->ringno, portRspPut,
- portRspMax);
+ pring->ringno, portRspPut, portRspMax);
phba->link_state = LPFC_HBA_ERROR;
spin_unlock_irqrestore(&phba->hbalock, iflag);
@@ -1596,13 +1576,12 @@
if (irsp->ulpStatus) {
/* Rsp ring <ringno> error: IOCB */
lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
- "%d:0328 Rsp Ring %d error: "
+ "0328 Rsp Ring %d error: "
"IOCB Data: "
"x%x x%x x%x x%x "
"x%x x%x x%x x%x "
"x%x x%x x%x x%x "
"x%x x%x x%x x%x\n",
- phba->brd_no,
pring->ringno,
irsp->un.ulpWord[0],
irsp->un.ulpWord[1],
@@ -1677,10 +1656,9 @@
} else {
/* Unknown IOCB command */
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
- "%d:0335 Unknown IOCB "
+ "0335 Unknown IOCB "
"command Data: x%x "
"x%x x%x x%x\n",
- phba->brd_no,
irsp->ulpCommand,
irsp->ulpStatus,
irsp->ulpIoTag,
@@ -1908,8 +1886,8 @@
/* Kill HBA */
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
- "%d:0329 Kill HBA Data: x%x x%x\n",
- phba->brd_no, phba->pport->port_state, psli->sli_flag);
+ "0329 Kill HBA Data: x%x x%x\n",
+ phba->pport->port_state, psli->sli_flag);
if ((pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool,
GFP_KERNEL)) == 0)
@@ -1982,7 +1960,7 @@
/* Reset HBA */
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
- "%d:0325 Reset HBA Data: x%x x%x\n", phba->brd_no,
+ "0325 Reset HBA Data: x%x x%x\n",
phba->pport->port_state, psli->sli_flag);
/* perform board reset */
@@ -2037,7 +2015,7 @@
/* Restart HBA */
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
- "%d:0337 Restart HBA Data: x%x x%x\n", phba->brd_no,
+ "0337 Restart HBA Data: x%x x%x\n",
phba->pport->port_state, psli->sli_flag);
word0 = 0;
@@ -2102,9 +2080,8 @@
/* Adapter failed to init, timeout, status reg
<status> */
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "%d:0436 Adapter failed to init, "
- "timeout, status reg x%x\n",
- phba->brd_no, status);
+ "0436 Adapter failed to init, "
+ "timeout, status reg x%x\n", status);
phba->link_state = LPFC_HBA_ERROR;
return -ETIMEDOUT;
}
@@ -2115,10 +2092,8 @@
/* Adapter failed to init, chipset, status reg
<status> */
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "%d:0437 Adapter failed to init, "
- "chipset, status reg x%x\n",
- phba->brd_no,
- status);
+ "0437 Adapter failed to init, "
+ "chipset, status reg x%x\n", status);
phba->link_state = LPFC_HBA_ERROR;
return -EIO;
}
@@ -2145,10 +2120,8 @@
/* ERROR: During chipset initialization */
/* Adapter failed to init, chipset, status reg <status> */
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "%d:0438 Adapter failed to init, chipset, "
- "status reg x%x\n",
- phba->brd_no,
- status);
+ "0438 Adapter failed to init, chipset, "
+ "status reg x%x\n", status);
phba->link_state = LPFC_HBA_ERROR;
return -EIO;
}
@@ -2226,9 +2199,9 @@
lpfc_printf_log(phba, KERN_ERR,
LOG_SLI | LOG_VPORT,
- "%d:1805 Adapter failed to init. "
+ "1805 Adapter failed to init. "
"Data: x%x x%x x%x\n",
- phba->brd_no, pmbox->mbxCommand,
+ pmbox->mbxCommand,
pmbox->mbxStatus, hbqno);
phba->link_state = LPFC_HBA_ERROR;
@@ -2295,10 +2268,9 @@
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
if (rc != MBX_SUCCESS) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "%d:0442 Adapter failed to init, mbxCmd x%x "
+ "0442 Adapter failed to init, mbxCmd x%x "
"CONFIG_PORT, mbxStatus x%x Data: x%x\n",
- phba->brd_no, pmb->mb.mbxCommand,
- pmb->mb.mbxStatus, 0);
+ pmb->mb.mbxCommand, pmb->mb.mbxStatus, 0);
spin_lock_irq(&phba->hbalock);
phba->sli.sli_flag &= ~LPFC_SLI2_ACTIVE;
spin_unlock_irq(&phba->hbalock);
@@ -2339,9 +2311,9 @@
case 2:
if (phba->cfg_npiv_enable) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT | LOG_VPORT,
- "%d:1824 NPIV enabled: Override lpfc_sli_mode "
+ "1824 NPIV enabled: Override lpfc_sli_mode "
"parameter (%d) to auto (0).\n",
- phba->brd_no, lpfc_sli_mode);
+ lpfc_sli_mode);
break;
}
mode = 2;
@@ -2351,9 +2323,8 @@
break;
default:
lpfc_printf_log(phba, KERN_ERR, LOG_INIT | LOG_VPORT,
- "%d:1819 Unrecognized lpfc_sli_mode "
- "parameter: %d.\n",
- phba->brd_no, lpfc_sli_mode);
+ "1819 Unrecognized lpfc_sli_mode "
+ "parameter: %d.\n", lpfc_sli_mode);
break;
}
@@ -2361,9 +2332,8 @@
rc = lpfc_do_config_port(phba, mode);
if (rc && lpfc_sli_mode == 3)
lpfc_printf_log(phba, KERN_ERR, LOG_INIT | LOG_VPORT,
- "%d:1820 Unable to select SLI-3. "
- "Not supported by adapter.\n",
- phba->brd_no);
+ "1820 Unable to select SLI-3. "
+ "Not supported by adapter.\n");
if (rc && mode != 2)
rc = lpfc_do_config_port(phba, 2);
if (rc)
@@ -2382,8 +2352,8 @@
}
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "%d:0444 Firmware in SLI %x mode. Max_vpi %d\n",
- phba->brd_no, phba->sli_rev, phba->max_vpi);
+ "0444 Firmware in SLI %x mode. Max_vpi %d\n",
+ phba->sli_rev, phba->max_vpi);
rc = lpfc_sli_ring_map(phba);
if (rc)
@@ -2408,8 +2378,7 @@
lpfc_sli_hba_setup_error:
phba->link_state = LPFC_HBA_ERROR;
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "%d:0445 Firmware initialization failed\n",
- phba->brd_no);
+ "0445 Firmware initialization failed\n");
return rc;
}
@@ -2461,9 +2430,7 @@
/* Mbox cmd <mbxCommand> timeout */
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
- "%d:0310 Mailbox command x%x timeout Data: x%x x%x "
- "x%p\n",
- phba->brd_no,
+ "0310 Mailbox command x%x timeout Data: x%x x%x x%p\n",
mb->mbxCommand,
phba->pport->port_state,
phba->sli.sli_flag,
@@ -2486,8 +2453,7 @@
lpfc_sli_abort_iocb_ring(phba, pring);
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
- "%d:0316 Resetting board due to mailbox timeout\n",
- phba->brd_no);
+ "0316 Resetting board due to mailbox timeout\n");
/*
* lpfc_offline calls lpfc_sli_hba_down which will clean up
* on oustanding mailbox commands.
@@ -2518,8 +2484,7 @@
if(!pmbox->vport) {
lpfc_printf_log(phba, KERN_ERR,
LOG_MBOX | LOG_VPORT,
- "%d:1806 Mbox x%x failed. No vport\n",
- phba->brd_no,
+ "1806 Mbox x%x failed. No vport\n",
pmbox->mb.mbxCommand);
dump_stack();
return MBXERR_ERROR;
@@ -2596,9 +2561,8 @@
/* Mbox cmd issue - BUSY */
lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
- "%d (%d):0308 Mbox cmd issue - BUSY Data: "
+ "(%d):0308 Mbox cmd issue - BUSY Data: "
"x%x x%x x%x x%x\n",
- phba->brd_no,
pmbox->vport ? pmbox->vport->vpi : 0xffffff,
mb->mbxCommand, phba->pport->port_state,
psli->sli_flag, flag);
@@ -2660,9 +2624,9 @@
/* Mailbox cmd <cmd> issue */
lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
- "%d (%d):0309 Mailbox cmd x%x issue Data: x%x x%x "
+ "(%d):0309 Mailbox cmd x%x issue Data: x%x x%x "
"x%x\n",
- phba->brd_no, pmbox->vport ? pmbox->vport->vpi : 0,
+ pmbox->vport ? pmbox->vport->vpi : 0,
mb->mbxCommand, phba->pport->port_state,
psli->sli_flag, flag);
@@ -2864,8 +2828,7 @@
(piocb->iocb.ulpCommand != CMD_CLOSE_XRI_CN)) {
lpfc_printf_log(phba, KERN_ERR,
LOG_SLI | LOG_VPORT,
- "%d:1807 IOCB x%x failed. No vport\n",
- phba->brd_no,
+ "1807 IOCB x%x failed. No vport\n",
piocb->iocb.ulpCommand);
dump_stack();
return IOCB_ERROR;
@@ -3096,11 +3059,10 @@
}
if (totiocbsize > MAX_SLIM_IOCB_SIZE) {
/* Too many cmd / rsp ring entries in SLI2 SLIM */
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "%d:0462 Too many cmd / rsp ring entries in "
- "SLI2 SLIM Data: x%x x%lx\n",
- phba->brd_no, totiocbsize,
- (unsigned long) MAX_SLIM_IOCB_SIZE);
+ printk(KERN_ERR "%d:0462 Too many cmd / rsp ring entries in "
+ "SLI2 SLIM Data: x%x x%lx\n",
+ phba->brd_no, totiocbsize,
+ (unsigned long) MAX_SLIM_IOCB_SIZE);
}
if (phba->cfg_multi_ring_support == 2)
lpfc_extra_ring_setup(phba);
@@ -3321,9 +3283,9 @@
spin_unlock_irq(&phba->hbalock);
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "%d:0410 Cannot find virtual addr for mapped buf on "
+ "0410 Cannot find virtual addr for mapped buf on "
"ring %d Data x%llx x%p x%p x%x\n",
- phba->brd_no, pring->ringno, (unsigned long long)phys,
+ pring->ringno, (unsigned long long)phys,
slp->next, slp->prev, pring->postbufq_cnt);
return NULL;
}
@@ -3348,12 +3310,11 @@
abort_iocb = phba->sli.iocbq_lookup[abort_iotag];
lpfc_printf_log(phba, KERN_INFO, LOG_ELS | LOG_SLI,
- "%d:0327 Cannot abort els iocb %p "
+ "0327 Cannot abort els iocb %p "
"with tag %x context %x, abort status %x, "
"abort code %x\n",
- phba->brd_no, abort_iocb, abort_iotag,
- abort_context, irsp->ulpStatus,
- irsp->un.ulpWord[4]);
+ abort_iocb, abort_iotag, abort_context,
+ irsp->ulpStatus, irsp->un.ulpWord[4]);
/*
* make sure we have the right iocbq before taking it
@@ -3387,9 +3348,9 @@
/* ELS cmd tag <ulpIoTag> completes */
lpfc_printf_log(phba, KERN_INFO, LOG_ELS,
- "%d (X):0133 Ignoring ELS cmd tag x%x completion Data: "
+ "0133 Ignoring ELS cmd tag x%x completion Data: "
"x%x x%x x%x\n",
- phba->brd_no, irsp->ulpIoTag, irsp->ulpStatus,
+ irsp->ulpIoTag, irsp->ulpStatus,
irsp->un.ulpWord[4], irsp->ulpTimeout);
if (cmdiocb->iocb.ulpCommand == CMD_GEN_REQUEST64_CR)
lpfc_ct_free_iocb(phba, cmdiocb);
@@ -3455,12 +3416,11 @@
abtsiocbp->iocb_cmpl = lpfc_sli_abort_els_cmpl;
- lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
- "%d (%d):0339 Abort xri x%x, original iotag x%x, "
- "abort cmd iotag x%x\n",
- phba->brd_no, vport->vpi,
- iabt->un.acxri.abortContextTag,
- iabt->un.acxri.abortIoTag, abtsiocbp->iotag);
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_SLI,
+ "0339 Abort xri x%x, original iotag x%x, "
+ "abort cmd iotag x%x\n",
+ iabt->un.acxri.abortContextTag,
+ iabt->un.acxri.abortIoTag, abtsiocbp->iotag);
retval = __lpfc_sli_issue_iocb(phba, pring, abtsiocbp, 0);
abort_iotag_exit:
@@ -3663,25 +3623,23 @@
if (piocb->iocb_flag & LPFC_IO_WAKE) {
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
- "%d:0331 IOCB wake signaled\n",
- phba->brd_no);
+ "0331 IOCB wake signaled\n");
} else if (timeleft == 0) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
- "%d:0338 IOCB wait timeout error - no "
- "wake response Data x%x\n",
- phba->brd_no, timeout);
+ "0338 IOCB wait timeout error - no "
+ "wake response Data x%x\n", timeout);
retval = IOCB_TIMEDOUT;
} else {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
- "%d:0330 IOCB wake NOT set, "
- "Data x%x x%lx\n", phba->brd_no,
+ "0330 IOCB wake NOT set, "
+ "Data x%x x%lx\n",
timeout, (timeleft / jiffies));
retval = IOCB_TIMEDOUT;
}
} else {
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
- "%d:0332 IOCB wait issue failed, Data x%x\n",
- phba->brd_no, retval);
+ ":0332 IOCB wait issue failed, Data x%x\n",
+ retval);
retval = IOCB_ERROR;
}
@@ -3932,12 +3890,10 @@
*/
lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX |
LOG_SLI,
- "%d (%d):0304 Stray Mailbox "
+ "(%d):0304 Stray Mailbox "
"Interrupt mbxCommand x%x "
"mbxStatus x%x\n",
- phba->brd_no,
- (vport
- ? vport->vpi : 0),
+ (vport ? vport->vpi : 0),
pmbox->mbxCommand,
pmbox->mbxStatus);
}