| /* |
| * Copyright 2002-2005, Instant802 Networks, Inc. |
| * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz> |
| * Copyright 2013-2014 Intel Mobile Communications GmbH |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/etherdevice.h> |
| #include <linux/netdevice.h> |
| #include <linux/types.h> |
| #include <linux/slab.h> |
| #include <linux/skbuff.h> |
| #include <linux/if_arp.h> |
| #include <linux/timer.h> |
| #include <linux/rtnetlink.h> |
| |
| #include <net/mac80211.h> |
| #include "ieee80211_i.h" |
| #include "driver-ops.h" |
| #include "rate.h" |
| #include "sta_info.h" |
| #include "debugfs_sta.h" |
| #include "mesh.h" |
| #include "wme.h" |
| |
| /** |
| * DOC: STA information lifetime rules |
| * |
| * STA info structures (&struct sta_info) are managed in a hash table |
| * for faster lookup and a list for iteration. They are managed using |
| * RCU, i.e. access to the list and hash table is protected by RCU. |
| * |
| * Upon allocating a STA info structure with sta_info_alloc(), the caller |
| * owns that structure. It must then insert it into the hash table using |
| * either sta_info_insert() or sta_info_insert_rcu(); only in the latter |
| * case (which acquires an rcu read section but must not be called from |
| * within one) will the pointer still be valid after the call. Note that |
| * the caller may not do much with the STA info before inserting it, in |
| * particular, it may not start any mesh peer link management or add |
| * encryption keys. |
| * |
| * When the insertion fails (sta_info_insert()) returns non-zero), the |
| * structure will have been freed by sta_info_insert()! |
| * |
| * Station entries are added by mac80211 when you establish a link with a |
| * peer. This means different things for the different type of interfaces |
| * we support. For a regular station this mean we add the AP sta when we |
| * receive an association response from the AP. For IBSS this occurs when |
| * get to know about a peer on the same IBSS. For WDS we add the sta for |
| * the peer immediately upon device open. When using AP mode we add stations |
| * for each respective station upon request from userspace through nl80211. |
| * |
| * In order to remove a STA info structure, various sta_info_destroy_*() |
| * calls are available. |
| * |
| * There is no concept of ownership on a STA entry, each structure is |
| * owned by the global hash table/list until it is removed. All users of |
| * the structure need to be RCU protected so that the structure won't be |
| * freed before they are done using it. |
| */ |
| |
| /* Caller must hold local->sta_mtx */ |
| static int sta_info_hash_del(struct ieee80211_local *local, |
| struct sta_info *sta) |
| { |
| struct sta_info *s; |
| |
| s = rcu_dereference_protected(local->sta_hash[STA_HASH(sta->sta.addr)], |
| lockdep_is_held(&local->sta_mtx)); |
| if (!s) |
| return -ENOENT; |
| if (s == sta) { |
| rcu_assign_pointer(local->sta_hash[STA_HASH(sta->sta.addr)], |
| s->hnext); |
| return 0; |
| } |
| |
| while (rcu_access_pointer(s->hnext) && |
| rcu_access_pointer(s->hnext) != sta) |
| s = rcu_dereference_protected(s->hnext, |
| lockdep_is_held(&local->sta_mtx)); |
| if (rcu_access_pointer(s->hnext)) { |
| rcu_assign_pointer(s->hnext, sta->hnext); |
| return 0; |
| } |
| |
| return -ENOENT; |
| } |
| |
| static void __cleanup_single_sta(struct sta_info *sta) |
| { |
| int ac, i; |
| struct tid_ampdu_tx *tid_tx; |
| struct ieee80211_sub_if_data *sdata = sta->sdata; |
| struct ieee80211_local *local = sdata->local; |
| struct ps_data *ps; |
| |
| if (test_sta_flag(sta, WLAN_STA_PS_STA) || |
| test_sta_flag(sta, WLAN_STA_PS_DRIVER) || |
| test_sta_flag(sta, WLAN_STA_PS_DELIVER)) { |
| if (sta->sdata->vif.type == NL80211_IFTYPE_AP || |
| sta->sdata->vif.type == NL80211_IFTYPE_AP_VLAN) |
| ps = &sdata->bss->ps; |
| else if (ieee80211_vif_is_mesh(&sdata->vif)) |
| ps = &sdata->u.mesh.ps; |
| else |
| return; |
| |
| clear_sta_flag(sta, WLAN_STA_PS_STA); |
| clear_sta_flag(sta, WLAN_STA_PS_DRIVER); |
| clear_sta_flag(sta, WLAN_STA_PS_DELIVER); |
| |
| atomic_dec(&ps->num_sta_ps); |
| } |
| |
| for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { |
| local->total_ps_buffered -= skb_queue_len(&sta->ps_tx_buf[ac]); |
| ieee80211_purge_tx_queue(&local->hw, &sta->ps_tx_buf[ac]); |
| ieee80211_purge_tx_queue(&local->hw, &sta->tx_filtered[ac]); |
| } |
| |
| if (ieee80211_vif_is_mesh(&sdata->vif)) |
| mesh_sta_cleanup(sta); |
| |
| cancel_work_sync(&sta->drv_deliver_wk); |
| |
| /* |
| * Destroy aggregation state here. It would be nice to wait for the |
| * driver to finish aggregation stop and then clean up, but for now |
| * drivers have to handle aggregation stop being requested, followed |
| * directly by station destruction. |
| */ |
| for (i = 0; i < IEEE80211_NUM_TIDS; i++) { |
| kfree(sta->ampdu_mlme.tid_start_tx[i]); |
| tid_tx = rcu_dereference_raw(sta->ampdu_mlme.tid_tx[i]); |
| if (!tid_tx) |
| continue; |
| ieee80211_purge_tx_queue(&local->hw, &tid_tx->pending); |
| kfree(tid_tx); |
| } |
| } |
| |
| static void cleanup_single_sta(struct sta_info *sta) |
| { |
| struct ieee80211_sub_if_data *sdata = sta->sdata; |
| struct ieee80211_local *local = sdata->local; |
| |
| __cleanup_single_sta(sta); |
| sta_info_free(local, sta); |
| } |
| |
| /* protected by RCU */ |
| struct sta_info *sta_info_get(struct ieee80211_sub_if_data *sdata, |
| const u8 *addr) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct sta_info *sta; |
| |
| sta = rcu_dereference_check(local->sta_hash[STA_HASH(addr)], |
| lockdep_is_held(&local->sta_mtx)); |
| while (sta) { |
| if (sta->sdata == sdata && |
| ether_addr_equal(sta->sta.addr, addr)) |
| break; |
| sta = rcu_dereference_check(sta->hnext, |
| lockdep_is_held(&local->sta_mtx)); |
| } |
| return sta; |
| } |
| |
| /* |
| * Get sta info either from the specified interface |
| * or from one of its vlans |
| */ |
| struct sta_info *sta_info_get_bss(struct ieee80211_sub_if_data *sdata, |
| const u8 *addr) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct sta_info *sta; |
| |
| sta = rcu_dereference_check(local->sta_hash[STA_HASH(addr)], |
| lockdep_is_held(&local->sta_mtx)); |
| while (sta) { |
| if ((sta->sdata == sdata || |
| (sta->sdata->bss && sta->sdata->bss == sdata->bss)) && |
| ether_addr_equal(sta->sta.addr, addr)) |
| break; |
| sta = rcu_dereference_check(sta->hnext, |
| lockdep_is_held(&local->sta_mtx)); |
| } |
| return sta; |
| } |
| |
| struct sta_info *sta_info_get_by_idx(struct ieee80211_sub_if_data *sdata, |
| int idx) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct sta_info *sta; |
| int i = 0; |
| |
| list_for_each_entry_rcu(sta, &local->sta_list, list) { |
| if (sdata != sta->sdata) |
| continue; |
| if (i < idx) { |
| ++i; |
| continue; |
| } |
| return sta; |
| } |
| |
| return NULL; |
| } |
| |
| /** |
| * sta_info_free - free STA |
| * |
| * @local: pointer to the global information |
| * @sta: STA info to free |
| * |
| * This function must undo everything done by sta_info_alloc() |
| * that may happen before sta_info_insert(). It may only be |
| * called when sta_info_insert() has not been attempted (and |
| * if that fails, the station is freed anyway.) |
| */ |
| void sta_info_free(struct ieee80211_local *local, struct sta_info *sta) |
| { |
| if (sta->rate_ctrl) |
| rate_control_free_sta(sta); |
| |
| sta_dbg(sta->sdata, "Destroyed STA %pM\n", sta->sta.addr); |
| |
| kfree(rcu_dereference_raw(sta->sta.rates)); |
| kfree(sta); |
| } |
| |
| /* Caller must hold local->sta_mtx */ |
| static void sta_info_hash_add(struct ieee80211_local *local, |
| struct sta_info *sta) |
| { |
| lockdep_assert_held(&local->sta_mtx); |
| sta->hnext = local->sta_hash[STA_HASH(sta->sta.addr)]; |
| rcu_assign_pointer(local->sta_hash[STA_HASH(sta->sta.addr)], sta); |
| } |
| |
| static void sta_deliver_ps_frames(struct work_struct *wk) |
| { |
| struct sta_info *sta; |
| |
| sta = container_of(wk, struct sta_info, drv_deliver_wk); |
| |
| if (sta->dead) |
| return; |
| |
| local_bh_disable(); |
| if (!test_sta_flag(sta, WLAN_STA_PS_STA)) |
| ieee80211_sta_ps_deliver_wakeup(sta); |
| else if (test_and_clear_sta_flag(sta, WLAN_STA_PSPOLL)) |
| ieee80211_sta_ps_deliver_poll_response(sta); |
| else if (test_and_clear_sta_flag(sta, WLAN_STA_UAPSD)) |
| ieee80211_sta_ps_deliver_uapsd(sta); |
| local_bh_enable(); |
| } |
| |
| static int sta_prepare_rate_control(struct ieee80211_local *local, |
| struct sta_info *sta, gfp_t gfp) |
| { |
| if (local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL) |
| return 0; |
| |
| sta->rate_ctrl = local->rate_ctrl; |
| sta->rate_ctrl_priv = rate_control_alloc_sta(sta->rate_ctrl, |
| &sta->sta, gfp); |
| if (!sta->rate_ctrl_priv) |
| return -ENOMEM; |
| |
| return 0; |
| } |
| |
| struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata, |
| const u8 *addr, gfp_t gfp) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct sta_info *sta; |
| struct timespec uptime; |
| int i; |
| |
| sta = kzalloc(sizeof(*sta) + local->hw.sta_data_size, gfp); |
| if (!sta) |
| return NULL; |
| |
| spin_lock_init(&sta->lock); |
| spin_lock_init(&sta->ps_lock); |
| INIT_WORK(&sta->drv_deliver_wk, sta_deliver_ps_frames); |
| INIT_WORK(&sta->ampdu_mlme.work, ieee80211_ba_session_work); |
| mutex_init(&sta->ampdu_mlme.mtx); |
| #ifdef CONFIG_MAC80211_MESH |
| if (ieee80211_vif_is_mesh(&sdata->vif) && |
| !sdata->u.mesh.user_mpm) |
| init_timer(&sta->plink_timer); |
| sta->nonpeer_pm = NL80211_MESH_POWER_ACTIVE; |
| #endif |
| |
| memcpy(sta->sta.addr, addr, ETH_ALEN); |
| sta->local = local; |
| sta->sdata = sdata; |
| sta->last_rx = jiffies; |
| |
| sta->sta_state = IEEE80211_STA_NONE; |
| |
| /* Mark TID as unreserved */ |
| sta->reserved_tid = IEEE80211_TID_UNRESERVED; |
| |
| ktime_get_ts(&uptime); |
| sta->last_connected = uptime.tv_sec; |
| ewma_init(&sta->avg_signal, 1024, 8); |
| for (i = 0; i < ARRAY_SIZE(sta->chain_signal_avg); i++) |
| ewma_init(&sta->chain_signal_avg[i], 1024, 8); |
| |
| if (sta_prepare_rate_control(local, sta, gfp)) { |
| kfree(sta); |
| return NULL; |
| } |
| |
| for (i = 0; i < IEEE80211_NUM_TIDS; i++) { |
| /* |
| * timer_to_tid must be initialized with identity mapping |
| * to enable session_timer's data differentiation. See |
| * sta_rx_agg_session_timer_expired for usage. |
| */ |
| sta->timer_to_tid[i] = i; |
| } |
| for (i = 0; i < IEEE80211_NUM_ACS; i++) { |
| skb_queue_head_init(&sta->ps_tx_buf[i]); |
| skb_queue_head_init(&sta->tx_filtered[i]); |
| } |
| |
| for (i = 0; i < IEEE80211_NUM_TIDS; i++) |
| sta->last_seq_ctrl[i] = cpu_to_le16(USHRT_MAX); |
| |
| sta->sta.smps_mode = IEEE80211_SMPS_OFF; |
| if (sdata->vif.type == NL80211_IFTYPE_AP || |
| sdata->vif.type == NL80211_IFTYPE_AP_VLAN) { |
| struct ieee80211_supported_band *sband = |
| local->hw.wiphy->bands[ieee80211_get_sdata_band(sdata)]; |
| u8 smps = (sband->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> |
| IEEE80211_HT_CAP_SM_PS_SHIFT; |
| /* |
| * Assume that hostapd advertises our caps in the beacon and |
| * this is the known_smps_mode for a station that just assciated |
| */ |
| switch (smps) { |
| case WLAN_HT_SMPS_CONTROL_DISABLED: |
| sta->known_smps_mode = IEEE80211_SMPS_OFF; |
| break; |
| case WLAN_HT_SMPS_CONTROL_STATIC: |
| sta->known_smps_mode = IEEE80211_SMPS_STATIC; |
| break; |
| case WLAN_HT_SMPS_CONTROL_DYNAMIC: |
| sta->known_smps_mode = IEEE80211_SMPS_DYNAMIC; |
| break; |
| default: |
| WARN_ON(1); |
| } |
| } |
| |
| sta_dbg(sdata, "Allocated STA %pM\n", sta->sta.addr); |
| |
| return sta; |
| } |
| |
| static int sta_info_insert_check(struct sta_info *sta) |
| { |
| struct ieee80211_sub_if_data *sdata = sta->sdata; |
| |
| /* |
| * Can't be a WARN_ON because it can be triggered through a race: |
| * something inserts a STA (on one CPU) without holding the RTNL |
| * and another CPU turns off the net device. |
| */ |
| if (unlikely(!ieee80211_sdata_running(sdata))) |
| return -ENETDOWN; |
| |
| if (WARN_ON(ether_addr_equal(sta->sta.addr, sdata->vif.addr) || |
| is_multicast_ether_addr(sta->sta.addr))) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int sta_info_insert_drv_state(struct ieee80211_local *local, |
| struct ieee80211_sub_if_data *sdata, |
| struct sta_info *sta) |
| { |
| enum ieee80211_sta_state state; |
| int err = 0; |
| |
| for (state = IEEE80211_STA_NOTEXIST; state < sta->sta_state; state++) { |
| err = drv_sta_state(local, sdata, sta, state, state + 1); |
| if (err) |
| break; |
| } |
| |
| if (!err) { |
| /* |
| * Drivers using legacy sta_add/sta_remove callbacks only |
| * get uploaded set to true after sta_add is called. |
| */ |
| if (!local->ops->sta_add) |
| sta->uploaded = true; |
| return 0; |
| } |
| |
| if (sdata->vif.type == NL80211_IFTYPE_ADHOC) { |
| sdata_info(sdata, |
| "failed to move IBSS STA %pM to state %d (%d) - keeping it anyway\n", |
| sta->sta.addr, state + 1, err); |
| err = 0; |
| } |
| |
| /* unwind on error */ |
| for (; state > IEEE80211_STA_NOTEXIST; state--) |
| WARN_ON(drv_sta_state(local, sdata, sta, state, state - 1)); |
| |
| return err; |
| } |
| |
| /* |
| * should be called with sta_mtx locked |
| * this function replaces the mutex lock |
| * with a RCU lock |
| */ |
| static int sta_info_insert_finish(struct sta_info *sta) __acquires(RCU) |
| { |
| struct ieee80211_local *local = sta->local; |
| struct ieee80211_sub_if_data *sdata = sta->sdata; |
| struct station_info sinfo; |
| int err = 0; |
| |
| lockdep_assert_held(&local->sta_mtx); |
| |
| /* check if STA exists already */ |
| if (sta_info_get_bss(sdata, sta->sta.addr)) { |
| err = -EEXIST; |
| goto out_err; |
| } |
| |
| local->num_sta++; |
| local->sta_generation++; |
| smp_mb(); |
| |
| /* simplify things and don't accept BA sessions yet */ |
| set_sta_flag(sta, WLAN_STA_BLOCK_BA); |
| |
| /* make the station visible */ |
| sta_info_hash_add(local, sta); |
| |
| list_add_tail_rcu(&sta->list, &local->sta_list); |
| |
| /* notify driver */ |
| err = sta_info_insert_drv_state(local, sdata, sta); |
| if (err) |
| goto out_remove; |
| |
| set_sta_flag(sta, WLAN_STA_INSERTED); |
| /* accept BA sessions now */ |
| clear_sta_flag(sta, WLAN_STA_BLOCK_BA); |
| |
| ieee80211_recalc_min_chandef(sdata); |
| ieee80211_sta_debugfs_add(sta); |
| rate_control_add_sta_debugfs(sta); |
| |
| memset(&sinfo, 0, sizeof(sinfo)); |
| sinfo.filled = 0; |
| sinfo.generation = local->sta_generation; |
| cfg80211_new_sta(sdata->dev, sta->sta.addr, &sinfo, GFP_KERNEL); |
| |
| sta_dbg(sdata, "Inserted STA %pM\n", sta->sta.addr); |
| |
| /* move reference to rcu-protected */ |
| rcu_read_lock(); |
| mutex_unlock(&local->sta_mtx); |
| |
| if (ieee80211_vif_is_mesh(&sdata->vif)) |
| mesh_accept_plinks_update(sdata); |
| |
| return 0; |
| out_remove: |
| sta_info_hash_del(local, sta); |
| list_del_rcu(&sta->list); |
| local->num_sta--; |
| synchronize_net(); |
| __cleanup_single_sta(sta); |
| out_err: |
| mutex_unlock(&local->sta_mtx); |
| rcu_read_lock(); |
| return err; |
| } |
| |
| int sta_info_insert_rcu(struct sta_info *sta) __acquires(RCU) |
| { |
| struct ieee80211_local *local = sta->local; |
| int err; |
| |
| might_sleep(); |
| |
| err = sta_info_insert_check(sta); |
| if (err) { |
| rcu_read_lock(); |
| goto out_free; |
| } |
| |
| mutex_lock(&local->sta_mtx); |
| |
| err = sta_info_insert_finish(sta); |
| if (err) |
| goto out_free; |
| |
| return 0; |
| out_free: |
| sta_info_free(local, sta); |
| return err; |
| } |
| |
| int sta_info_insert(struct sta_info *sta) |
| { |
| int err = sta_info_insert_rcu(sta); |
| |
| rcu_read_unlock(); |
| |
| return err; |
| } |
| |
| static inline void __bss_tim_set(u8 *tim, u16 id) |
| { |
| /* |
| * This format has been mandated by the IEEE specifications, |
| * so this line may not be changed to use the __set_bit() format. |
| */ |
| tim[id / 8] |= (1 << (id % 8)); |
| } |
| |
| static inline void __bss_tim_clear(u8 *tim, u16 id) |
| { |
| /* |
| * This format has been mandated by the IEEE specifications, |
| * so this line may not be changed to use the __clear_bit() format. |
| */ |
| tim[id / 8] &= ~(1 << (id % 8)); |
| } |
| |
| static inline bool __bss_tim_get(u8 *tim, u16 id) |
| { |
| /* |
| * This format has been mandated by the IEEE specifications, |
| * so this line may not be changed to use the test_bit() format. |
| */ |
| return tim[id / 8] & (1 << (id % 8)); |
| } |
| |
| static unsigned long ieee80211_tids_for_ac(int ac) |
| { |
| /* If we ever support TIDs > 7, this obviously needs to be adjusted */ |
| switch (ac) { |
| case IEEE80211_AC_VO: |
| return BIT(6) | BIT(7); |
| case IEEE80211_AC_VI: |
| return BIT(4) | BIT(5); |
| case IEEE80211_AC_BE: |
| return BIT(0) | BIT(3); |
| case IEEE80211_AC_BK: |
| return BIT(1) | BIT(2); |
| default: |
| WARN_ON(1); |
| return 0; |
| } |
| } |
| |
| static void __sta_info_recalc_tim(struct sta_info *sta, bool ignore_pending) |
| { |
| struct ieee80211_local *local = sta->local; |
| struct ps_data *ps; |
| bool indicate_tim = false; |
| u8 ignore_for_tim = sta->sta.uapsd_queues; |
| int ac; |
| u16 id; |
| |
| if (sta->sdata->vif.type == NL80211_IFTYPE_AP || |
| sta->sdata->vif.type == NL80211_IFTYPE_AP_VLAN) { |
| if (WARN_ON_ONCE(!sta->sdata->bss)) |
| return; |
| |
| ps = &sta->sdata->bss->ps; |
| id = sta->sta.aid; |
| #ifdef CONFIG_MAC80211_MESH |
| } else if (ieee80211_vif_is_mesh(&sta->sdata->vif)) { |
| ps = &sta->sdata->u.mesh.ps; |
| /* TIM map only for 1 <= PLID <= IEEE80211_MAX_AID */ |
| id = sta->plid % (IEEE80211_MAX_AID + 1); |
| #endif |
| } else { |
| return; |
| } |
| |
| /* No need to do anything if the driver does all */ |
| if (local->hw.flags & IEEE80211_HW_AP_LINK_PS) |
| return; |
| |
| if (sta->dead) |
| goto done; |
| |
| /* |
| * If all ACs are delivery-enabled then we should build |
| * the TIM bit for all ACs anyway; if only some are then |
| * we ignore those and build the TIM bit using only the |
| * non-enabled ones. |
| */ |
| if (ignore_for_tim == BIT(IEEE80211_NUM_ACS) - 1) |
| ignore_for_tim = 0; |
| |
| if (ignore_pending) |
| ignore_for_tim = BIT(IEEE80211_NUM_ACS) - 1; |
| |
| for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { |
| unsigned long tids; |
| |
| if (ignore_for_tim & BIT(ac)) |
| continue; |
| |
| indicate_tim |= !skb_queue_empty(&sta->tx_filtered[ac]) || |
| !skb_queue_empty(&sta->ps_tx_buf[ac]); |
| if (indicate_tim) |
| break; |
| |
| tids = ieee80211_tids_for_ac(ac); |
| |
| indicate_tim |= |
| sta->driver_buffered_tids & tids; |
| } |
| |
| done: |
| spin_lock_bh(&local->tim_lock); |
| |
| if (indicate_tim == __bss_tim_get(ps->tim, id)) |
| goto out_unlock; |
| |
| if (indicate_tim) |
| __bss_tim_set(ps->tim, id); |
| else |
| __bss_tim_clear(ps->tim, id); |
| |
| if (local->ops->set_tim && !WARN_ON(sta->dead)) { |
| local->tim_in_locked_section = true; |
| drv_set_tim(local, &sta->sta, indicate_tim); |
| local->tim_in_locked_section = false; |
| } |
| |
| out_unlock: |
| spin_unlock_bh(&local->tim_lock); |
| } |
| |
| void sta_info_recalc_tim(struct sta_info *sta) |
| { |
| __sta_info_recalc_tim(sta, false); |
| } |
| |
| static bool sta_info_buffer_expired(struct sta_info *sta, struct sk_buff *skb) |
| { |
| struct ieee80211_tx_info *info; |
| int timeout; |
| |
| if (!skb) |
| return false; |
| |
| info = IEEE80211_SKB_CB(skb); |
| |
| /* Timeout: (2 * listen_interval * beacon_int * 1024 / 1000000) sec */ |
| timeout = (sta->listen_interval * |
| sta->sdata->vif.bss_conf.beacon_int * |
| 32 / 15625) * HZ; |
| if (timeout < STA_TX_BUFFER_EXPIRE) |
| timeout = STA_TX_BUFFER_EXPIRE; |
| return time_after(jiffies, info->control.jiffies + timeout); |
| } |
| |
| |
| static bool sta_info_cleanup_expire_buffered_ac(struct ieee80211_local *local, |
| struct sta_info *sta, int ac) |
| { |
| unsigned long flags; |
| struct sk_buff *skb; |
| |
| /* |
| * First check for frames that should expire on the filtered |
| * queue. Frames here were rejected by the driver and are on |
| * a separate queue to avoid reordering with normal PS-buffered |
| * frames. They also aren't accounted for right now in the |
| * total_ps_buffered counter. |
| */ |
| for (;;) { |
| spin_lock_irqsave(&sta->tx_filtered[ac].lock, flags); |
| skb = skb_peek(&sta->tx_filtered[ac]); |
| if (sta_info_buffer_expired(sta, skb)) |
| skb = __skb_dequeue(&sta->tx_filtered[ac]); |
| else |
| skb = NULL; |
| spin_unlock_irqrestore(&sta->tx_filtered[ac].lock, flags); |
| |
| /* |
| * Frames are queued in order, so if this one |
| * hasn't expired yet we can stop testing. If |
| * we actually reached the end of the queue we |
| * also need to stop, of course. |
| */ |
| if (!skb) |
| break; |
| ieee80211_free_txskb(&local->hw, skb); |
| } |
| |
| /* |
| * Now also check the normal PS-buffered queue, this will |
| * only find something if the filtered queue was emptied |
| * since the filtered frames are all before the normal PS |
| * buffered frames. |
| */ |
| for (;;) { |
| spin_lock_irqsave(&sta->ps_tx_buf[ac].lock, flags); |
| skb = skb_peek(&sta->ps_tx_buf[ac]); |
| if (sta_info_buffer_expired(sta, skb)) |
| skb = __skb_dequeue(&sta->ps_tx_buf[ac]); |
| else |
| skb = NULL; |
| spin_unlock_irqrestore(&sta->ps_tx_buf[ac].lock, flags); |
| |
| /* |
| * frames are queued in order, so if this one |
| * hasn't expired yet (or we reached the end of |
| * the queue) we can stop testing |
| */ |
| if (!skb) |
| break; |
| |
| local->total_ps_buffered--; |
| ps_dbg(sta->sdata, "Buffered frame expired (STA %pM)\n", |
| sta->sta.addr); |
| ieee80211_free_txskb(&local->hw, skb); |
| } |
| |
| /* |
| * Finally, recalculate the TIM bit for this station -- it might |
| * now be clear because the station was too slow to retrieve its |
| * frames. |
| */ |
| sta_info_recalc_tim(sta); |
| |
| /* |
| * Return whether there are any frames still buffered, this is |
| * used to check whether the cleanup timer still needs to run, |
| * if there are no frames we don't need to rearm the timer. |
| */ |
| return !(skb_queue_empty(&sta->ps_tx_buf[ac]) && |
| skb_queue_empty(&sta->tx_filtered[ac])); |
| } |
| |
| static bool sta_info_cleanup_expire_buffered(struct ieee80211_local *local, |
| struct sta_info *sta) |
| { |
| bool have_buffered = false; |
| int ac; |
| |
| /* This is only necessary for stations on BSS/MBSS interfaces */ |
| if (!sta->sdata->bss && |
| !ieee80211_vif_is_mesh(&sta->sdata->vif)) |
| return false; |
| |
| for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) |
| have_buffered |= |
| sta_info_cleanup_expire_buffered_ac(local, sta, ac); |
| |
| return have_buffered; |
| } |
| |
| static int __must_check __sta_info_destroy_part1(struct sta_info *sta) |
| { |
| struct ieee80211_local *local; |
| struct ieee80211_sub_if_data *sdata; |
| int ret; |
| |
| might_sleep(); |
| |
| if (!sta) |
| return -ENOENT; |
| |
| local = sta->local; |
| sdata = sta->sdata; |
| |
| lockdep_assert_held(&local->sta_mtx); |
| |
| /* |
| * Before removing the station from the driver and |
| * rate control, it might still start new aggregation |
| * sessions -- block that to make sure the tear-down |
| * will be sufficient. |
| */ |
| set_sta_flag(sta, WLAN_STA_BLOCK_BA); |
| ieee80211_sta_tear_down_BA_sessions(sta, AGG_STOP_DESTROY_STA); |
| |
| ret = sta_info_hash_del(local, sta); |
| if (WARN_ON(ret)) |
| return ret; |
| |
| /* |
| * for TDLS peers, make sure to return to the base channel before |
| * removal. |
| */ |
| if (test_sta_flag(sta, WLAN_STA_TDLS_OFF_CHANNEL)) { |
| drv_tdls_cancel_channel_switch(local, sdata, &sta->sta); |
| clear_sta_flag(sta, WLAN_STA_TDLS_OFF_CHANNEL); |
| } |
| |
| list_del_rcu(&sta->list); |
| |
| drv_sta_pre_rcu_remove(local, sta->sdata, sta); |
| |
| if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN && |
| rcu_access_pointer(sdata->u.vlan.sta) == sta) |
| RCU_INIT_POINTER(sdata->u.vlan.sta, NULL); |
| |
| return 0; |
| } |
| |
| static void __sta_info_destroy_part2(struct sta_info *sta) |
| { |
| struct ieee80211_local *local = sta->local; |
| struct ieee80211_sub_if_data *sdata = sta->sdata; |
| struct station_info sinfo = {}; |
| int ret; |
| |
| /* |
| * NOTE: This assumes at least synchronize_net() was done |
| * after _part1 and before _part2! |
| */ |
| |
| might_sleep(); |
| lockdep_assert_held(&local->sta_mtx); |
| |
| /* now keys can no longer be reached */ |
| ieee80211_free_sta_keys(local, sta); |
| |
| /* disable TIM bit - last chance to tell driver */ |
| __sta_info_recalc_tim(sta, true); |
| |
| sta->dead = true; |
| |
| local->num_sta--; |
| local->sta_generation++; |
| |
| while (sta->sta_state > IEEE80211_STA_NONE) { |
| ret = sta_info_move_state(sta, sta->sta_state - 1); |
| if (ret) { |
| WARN_ON_ONCE(1); |
| break; |
| } |
| } |
| |
| if (sta->uploaded) { |
| ret = drv_sta_state(local, sdata, sta, IEEE80211_STA_NONE, |
| IEEE80211_STA_NOTEXIST); |
| WARN_ON_ONCE(ret != 0); |
| } |
| |
| sta_dbg(sdata, "Removed STA %pM\n", sta->sta.addr); |
| |
| sta_set_sinfo(sta, &sinfo); |
| cfg80211_del_sta_sinfo(sdata->dev, sta->sta.addr, &sinfo, GFP_KERNEL); |
| |
| rate_control_remove_sta_debugfs(sta); |
| ieee80211_sta_debugfs_remove(sta); |
| ieee80211_recalc_min_chandef(sdata); |
| |
| cleanup_single_sta(sta); |
| } |
| |
| int __must_check __sta_info_destroy(struct sta_info *sta) |
| { |
| int err = __sta_info_destroy_part1(sta); |
| |
| if (err) |
| return err; |
| |
| synchronize_net(); |
| |
| __sta_info_destroy_part2(sta); |
| |
| return 0; |
| } |
| |
| int sta_info_destroy_addr(struct ieee80211_sub_if_data *sdata, const u8 *addr) |
| { |
| struct sta_info *sta; |
| int ret; |
| |
| mutex_lock(&sdata->local->sta_mtx); |
| sta = sta_info_get(sdata, addr); |
| ret = __sta_info_destroy(sta); |
| mutex_unlock(&sdata->local->sta_mtx); |
| |
| return ret; |
| } |
| |
| int sta_info_destroy_addr_bss(struct ieee80211_sub_if_data *sdata, |
| const u8 *addr) |
| { |
| struct sta_info *sta; |
| int ret; |
| |
| mutex_lock(&sdata->local->sta_mtx); |
| sta = sta_info_get_bss(sdata, addr); |
| ret = __sta_info_destroy(sta); |
| mutex_unlock(&sdata->local->sta_mtx); |
| |
| return ret; |
| } |
| |
| static void sta_info_cleanup(unsigned long data) |
| { |
| struct ieee80211_local *local = (struct ieee80211_local *) data; |
| struct sta_info *sta; |
| bool timer_needed = false; |
| |
| rcu_read_lock(); |
| list_for_each_entry_rcu(sta, &local->sta_list, list) |
| if (sta_info_cleanup_expire_buffered(local, sta)) |
| timer_needed = true; |
| rcu_read_unlock(); |
| |
| if (local->quiescing) |
| return; |
| |
| if (!timer_needed) |
| return; |
| |
| mod_timer(&local->sta_cleanup, |
| round_jiffies(jiffies + STA_INFO_CLEANUP_INTERVAL)); |
| } |
| |
| void sta_info_init(struct ieee80211_local *local) |
| { |
| spin_lock_init(&local->tim_lock); |
| mutex_init(&local->sta_mtx); |
| INIT_LIST_HEAD(&local->sta_list); |
| |
| setup_timer(&local->sta_cleanup, sta_info_cleanup, |
| (unsigned long)local); |
| } |
| |
| void sta_info_stop(struct ieee80211_local *local) |
| { |
| del_timer_sync(&local->sta_cleanup); |
| } |
| |
| |
| int __sta_info_flush(struct ieee80211_sub_if_data *sdata, bool vlans) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct sta_info *sta, *tmp; |
| LIST_HEAD(free_list); |
| int ret = 0; |
| |
| might_sleep(); |
| |
| WARN_ON(vlans && sdata->vif.type != NL80211_IFTYPE_AP); |
| WARN_ON(vlans && !sdata->bss); |
| |
| mutex_lock(&local->sta_mtx); |
| list_for_each_entry_safe(sta, tmp, &local->sta_list, list) { |
| if (sdata == sta->sdata || |
| (vlans && sdata->bss == sta->sdata->bss)) { |
| if (!WARN_ON(__sta_info_destroy_part1(sta))) |
| list_add(&sta->free_list, &free_list); |
| ret++; |
| } |
| } |
| |
| if (!list_empty(&free_list)) { |
| synchronize_net(); |
| list_for_each_entry_safe(sta, tmp, &free_list, free_list) |
| __sta_info_destroy_part2(sta); |
| } |
| mutex_unlock(&local->sta_mtx); |
| |
| return ret; |
| } |
| |
| void ieee80211_sta_expire(struct ieee80211_sub_if_data *sdata, |
| unsigned long exp_time) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct sta_info *sta, *tmp; |
| |
| mutex_lock(&local->sta_mtx); |
| |
| list_for_each_entry_safe(sta, tmp, &local->sta_list, list) { |
| if (sdata != sta->sdata) |
| continue; |
| |
| if (time_after(jiffies, sta->last_rx + exp_time)) { |
| sta_dbg(sta->sdata, "expiring inactive STA %pM\n", |
| sta->sta.addr); |
| |
| if (ieee80211_vif_is_mesh(&sdata->vif) && |
| test_sta_flag(sta, WLAN_STA_PS_STA)) |
| atomic_dec(&sdata->u.mesh.ps.num_sta_ps); |
| |
| WARN_ON(__sta_info_destroy(sta)); |
| } |
| } |
| |
| mutex_unlock(&local->sta_mtx); |
| } |
| |
| struct ieee80211_sta *ieee80211_find_sta_by_ifaddr(struct ieee80211_hw *hw, |
| const u8 *addr, |
| const u8 *localaddr) |
| { |
| struct sta_info *sta, *nxt; |
| |
| /* |
| * Just return a random station if localaddr is NULL |
| * ... first in list. |
| */ |
| for_each_sta_info(hw_to_local(hw), addr, sta, nxt) { |
| if (localaddr && |
| !ether_addr_equal(sta->sdata->vif.addr, localaddr)) |
| continue; |
| if (!sta->uploaded) |
| return NULL; |
| return &sta->sta; |
| } |
| |
| return NULL; |
| } |
| EXPORT_SYMBOL_GPL(ieee80211_find_sta_by_ifaddr); |
| |
| struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_vif *vif, |
| const u8 *addr) |
| { |
| struct sta_info *sta; |
| |
| if (!vif) |
| return NULL; |
| |
| sta = sta_info_get_bss(vif_to_sdata(vif), addr); |
| if (!sta) |
| return NULL; |
| |
| if (!sta->uploaded) |
| return NULL; |
| |
| return &sta->sta; |
| } |
| EXPORT_SYMBOL(ieee80211_find_sta); |
| |
| /* powersave support code */ |
| void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta) |
| { |
| struct ieee80211_sub_if_data *sdata = sta->sdata; |
| struct ieee80211_local *local = sdata->local; |
| struct sk_buff_head pending; |
| int filtered = 0, buffered = 0, ac; |
| unsigned long flags; |
| struct ps_data *ps; |
| |
| if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) |
| sdata = container_of(sdata->bss, struct ieee80211_sub_if_data, |
| u.ap); |
| |
| if (sdata->vif.type == NL80211_IFTYPE_AP) |
| ps = &sdata->bss->ps; |
| else if (ieee80211_vif_is_mesh(&sdata->vif)) |
| ps = &sdata->u.mesh.ps; |
| else |
| return; |
| |
| clear_sta_flag(sta, WLAN_STA_SP); |
| |
| BUILD_BUG_ON(BITS_TO_LONGS(IEEE80211_NUM_TIDS) > 1); |
| sta->driver_buffered_tids = 0; |
| |
| if (!(local->hw.flags & IEEE80211_HW_AP_LINK_PS)) |
| drv_sta_notify(local, sdata, STA_NOTIFY_AWAKE, &sta->sta); |
| |
| skb_queue_head_init(&pending); |
| |
| /* sync with ieee80211_tx_h_unicast_ps_buf */ |
| spin_lock(&sta->ps_lock); |
| /* Send all buffered frames to the station */ |
| for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { |
| int count = skb_queue_len(&pending), tmp; |
| |
| spin_lock_irqsave(&sta->tx_filtered[ac].lock, flags); |
| skb_queue_splice_tail_init(&sta->tx_filtered[ac], &pending); |
| spin_unlock_irqrestore(&sta->tx_filtered[ac].lock, flags); |
| tmp = skb_queue_len(&pending); |
| filtered += tmp - count; |
| count = tmp; |
| |
| spin_lock_irqsave(&sta->ps_tx_buf[ac].lock, flags); |
| skb_queue_splice_tail_init(&sta->ps_tx_buf[ac], &pending); |
| spin_unlock_irqrestore(&sta->ps_tx_buf[ac].lock, flags); |
| tmp = skb_queue_len(&pending); |
| buffered += tmp - count; |
| } |
| |
| ieee80211_add_pending_skbs(local, &pending); |
| |
| /* now we're no longer in the deliver code */ |
| clear_sta_flag(sta, WLAN_STA_PS_DELIVER); |
| |
| /* The station might have polled and then woken up before we responded, |
| * so clear these flags now to avoid them sticking around. |
| */ |
| clear_sta_flag(sta, WLAN_STA_PSPOLL); |
| clear_sta_flag(sta, WLAN_STA_UAPSD); |
| spin_unlock(&sta->ps_lock); |
| |
| atomic_dec(&ps->num_sta_ps); |
| |
| /* This station just woke up and isn't aware of our SMPS state */ |
| if (!ieee80211_vif_is_mesh(&sdata->vif) && |
| !ieee80211_smps_is_restrictive(sta->known_smps_mode, |
| sdata->smps_mode) && |
| sta->known_smps_mode != sdata->bss->req_smps && |
| sta_info_tx_streams(sta) != 1) { |
| ht_dbg(sdata, |
| "%pM just woke up and MIMO capable - update SMPS\n", |
| sta->sta.addr); |
| ieee80211_send_smps_action(sdata, sdata->bss->req_smps, |
| sta->sta.addr, |
| sdata->vif.bss_conf.bssid); |
| } |
| |
| local->total_ps_buffered -= buffered; |
| |
| sta_info_recalc_tim(sta); |
| |
| ps_dbg(sdata, |
| "STA %pM aid %d sending %d filtered/%d PS frames since STA not sleeping anymore\n", |
| sta->sta.addr, sta->sta.aid, filtered, buffered); |
| } |
| |
| static void ieee80211_send_null_response(struct ieee80211_sub_if_data *sdata, |
| struct sta_info *sta, int tid, |
| enum ieee80211_frame_release_type reason, |
| bool call_driver) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_qos_hdr *nullfunc; |
| struct sk_buff *skb; |
| int size = sizeof(*nullfunc); |
| __le16 fc; |
| bool qos = sta->sta.wme; |
| struct ieee80211_tx_info *info; |
| struct ieee80211_chanctx_conf *chanctx_conf; |
| |
| if (qos) { |
| fc = cpu_to_le16(IEEE80211_FTYPE_DATA | |
| IEEE80211_STYPE_QOS_NULLFUNC | |
| IEEE80211_FCTL_FROMDS); |
| } else { |
| size -= 2; |
| fc = cpu_to_le16(IEEE80211_FTYPE_DATA | |
| IEEE80211_STYPE_NULLFUNC | |
| IEEE80211_FCTL_FROMDS); |
| } |
| |
| skb = dev_alloc_skb(local->hw.extra_tx_headroom + size); |
| if (!skb) |
| return; |
| |
| skb_reserve(skb, local->hw.extra_tx_headroom); |
| |
| nullfunc = (void *) skb_put(skb, size); |
| nullfunc->frame_control = fc; |
| nullfunc->duration_id = 0; |
| memcpy(nullfunc->addr1, sta->sta.addr, ETH_ALEN); |
| memcpy(nullfunc->addr2, sdata->vif.addr, ETH_ALEN); |
| memcpy(nullfunc->addr3, sdata->vif.addr, ETH_ALEN); |
| nullfunc->seq_ctrl = 0; |
| |
| skb->priority = tid; |
| skb_set_queue_mapping(skb, ieee802_1d_to_ac[tid]); |
| if (qos) { |
| nullfunc->qos_ctrl = cpu_to_le16(tid); |
| |
| if (reason == IEEE80211_FRAME_RELEASE_UAPSD) |
| nullfunc->qos_ctrl |= |
| cpu_to_le16(IEEE80211_QOS_CTL_EOSP); |
| } |
| |
| info = IEEE80211_SKB_CB(skb); |
| |
| /* |
| * Tell TX path to send this frame even though the |
| * STA may still remain is PS mode after this frame |
| * exchange. Also set EOSP to indicate this packet |
| * ends the poll/service period. |
| */ |
| info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER | |
| IEEE80211_TX_STATUS_EOSP | |
| IEEE80211_TX_CTL_REQ_TX_STATUS; |
| |
| info->control.flags |= IEEE80211_TX_CTRL_PS_RESPONSE; |
| |
| if (call_driver) |
| drv_allow_buffered_frames(local, sta, BIT(tid), 1, |
| reason, false); |
| |
| skb->dev = sdata->dev; |
| |
| rcu_read_lock(); |
| chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); |
| if (WARN_ON(!chanctx_conf)) { |
| rcu_read_unlock(); |
| kfree_skb(skb); |
| return; |
| } |
| |
| info->band = chanctx_conf->def.chan->band; |
| ieee80211_xmit(sdata, skb); |
| rcu_read_unlock(); |
| } |
| |
| static int find_highest_prio_tid(unsigned long tids) |
| { |
| /* lower 3 TIDs aren't ordered perfectly */ |
| if (tids & 0xF8) |
| return fls(tids) - 1; |
| /* TID 0 is BE just like TID 3 */ |
| if (tids & BIT(0)) |
| return 0; |
| return fls(tids) - 1; |
| } |
| |
| static void |
| ieee80211_sta_ps_deliver_response(struct sta_info *sta, |
| int n_frames, u8 ignored_acs, |
| enum ieee80211_frame_release_type reason) |
| { |
| struct ieee80211_sub_if_data *sdata = sta->sdata; |
| struct ieee80211_local *local = sdata->local; |
| bool more_data = false; |
| int ac; |
| unsigned long driver_release_tids = 0; |
| struct sk_buff_head frames; |
| |
| /* Service or PS-Poll period starts */ |
| set_sta_flag(sta, WLAN_STA_SP); |
| |
| __skb_queue_head_init(&frames); |
| |
| /* Get response frame(s) and more data bit for the last one. */ |
| for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { |
| unsigned long tids; |
| |
| if (ignored_acs & BIT(ac)) |
| continue; |
| |
| tids = ieee80211_tids_for_ac(ac); |
| |
| /* if we already have frames from software, then we can't also |
| * release from hardware queues |
| */ |
| if (skb_queue_empty(&frames)) |
| driver_release_tids |= sta->driver_buffered_tids & tids; |
| |
| if (driver_release_tids) { |
| /* If the driver has data on more than one TID then |
| * certainly there's more data if we release just a |
| * single frame now (from a single TID). This will |
| * only happen for PS-Poll. |
| */ |
| if (reason == IEEE80211_FRAME_RELEASE_PSPOLL && |
| hweight16(driver_release_tids) > 1) { |
| more_data = true; |
| driver_release_tids = |
| BIT(find_highest_prio_tid( |
| driver_release_tids)); |
| break; |
| } |
| } else { |
| struct sk_buff *skb; |
| |
| while (n_frames > 0) { |
| skb = skb_dequeue(&sta->tx_filtered[ac]); |
| if (!skb) { |
| skb = skb_dequeue( |
| &sta->ps_tx_buf[ac]); |
| if (skb) |
| local->total_ps_buffered--; |
| } |
| if (!skb) |
| break; |
| n_frames--; |
| __skb_queue_tail(&frames, skb); |
| } |
| } |
| |
| /* If we have more frames buffered on this AC, then set the |
| * more-data bit and abort the loop since we can't send more |
| * data from other ACs before the buffered frames from this. |
| */ |
| if (!skb_queue_empty(&sta->tx_filtered[ac]) || |
| !skb_queue_empty(&sta->ps_tx_buf[ac])) { |
| more_data = true; |
| break; |
| } |
| } |
| |
| if (skb_queue_empty(&frames) && !driver_release_tids) { |
| int tid; |
| |
| /* |
| * For PS-Poll, this can only happen due to a race condition |
| * when we set the TIM bit and the station notices it, but |
| * before it can poll for the frame we expire it. |
| * |
| * For uAPSD, this is said in the standard (11.2.1.5 h): |
| * At each unscheduled SP for a non-AP STA, the AP shall |
| * attempt to transmit at least one MSDU or MMPDU, but no |
| * more than the value specified in the Max SP Length field |
| * in the QoS Capability element from delivery-enabled ACs, |
| * that are destined for the non-AP STA. |
| * |
| * Since we have no other MSDU/MMPDU, transmit a QoS null frame. |
| */ |
| |
| /* This will evaluate to 1, 3, 5 or 7. */ |
| tid = 7 - ((ffs(~ignored_acs) - 1) << 1); |
| |
| ieee80211_send_null_response(sdata, sta, tid, reason, true); |
| } else if (!driver_release_tids) { |
| struct sk_buff_head pending; |
| struct sk_buff *skb; |
| int num = 0; |
| u16 tids = 0; |
| bool need_null = false; |
| |
| skb_queue_head_init(&pending); |
| |
| while ((skb = __skb_dequeue(&frames))) { |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| struct ieee80211_hdr *hdr = (void *) skb->data; |
| u8 *qoshdr = NULL; |
| |
| num++; |
| |
| /* |
| * Tell TX path to send this frame even though the |
| * STA may still remain is PS mode after this frame |
| * exchange. |
| */ |
| info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER; |
| info->control.flags |= IEEE80211_TX_CTRL_PS_RESPONSE; |
| |
| /* |
| * Use MoreData flag to indicate whether there are |
| * more buffered frames for this STA |
| */ |
| if (more_data || !skb_queue_empty(&frames)) |
| hdr->frame_control |= |
| cpu_to_le16(IEEE80211_FCTL_MOREDATA); |
| else |
| hdr->frame_control &= |
| cpu_to_le16(~IEEE80211_FCTL_MOREDATA); |
| |
| if (ieee80211_is_data_qos(hdr->frame_control) || |
| ieee80211_is_qos_nullfunc(hdr->frame_control)) |
| qoshdr = ieee80211_get_qos_ctl(hdr); |
| |
| tids |= BIT(skb->priority); |
| |
| __skb_queue_tail(&pending, skb); |
| |
| /* end service period after last frame or add one */ |
| if (!skb_queue_empty(&frames)) |
| continue; |
| |
| if (reason != IEEE80211_FRAME_RELEASE_UAPSD) { |
| /* for PS-Poll, there's only one frame */ |
| info->flags |= IEEE80211_TX_STATUS_EOSP | |
| IEEE80211_TX_CTL_REQ_TX_STATUS; |
| break; |
| } |
| |
| /* For uAPSD, things are a bit more complicated. If the |
| * last frame has a QoS header (i.e. is a QoS-data or |
| * QoS-nulldata frame) then just set the EOSP bit there |
| * and be done. |
| * If the frame doesn't have a QoS header (which means |
| * it should be a bufferable MMPDU) then we can't set |
| * the EOSP bit in the QoS header; add a QoS-nulldata |
| * frame to the list to send it after the MMPDU. |
| * |
| * Note that this code is only in the mac80211-release |
| * code path, we assume that the driver will not buffer |
| * anything but QoS-data frames, or if it does, will |
| * create the QoS-nulldata frame by itself if needed. |
| * |
| * Cf. 802.11-2012 10.2.1.10 (c). |
| */ |
| if (qoshdr) { |
| *qoshdr |= IEEE80211_QOS_CTL_EOSP; |
| |
| info->flags |= IEEE80211_TX_STATUS_EOSP | |
| IEEE80211_TX_CTL_REQ_TX_STATUS; |
| } else { |
| /* The standard isn't completely clear on this |
| * as it says the more-data bit should be set |
| * if there are more BUs. The QoS-Null frame |
| * we're about to send isn't buffered yet, we |
| * only create it below, but let's pretend it |
| * was buffered just in case some clients only |
| * expect more-data=0 when eosp=1. |
| */ |
| hdr->frame_control |= |
| cpu_to_le16(IEEE80211_FCTL_MOREDATA); |
| need_null = true; |
| num++; |
| } |
| break; |
| } |
| |
| drv_allow_buffered_frames(local, sta, tids, num, |
| reason, more_data); |
| |
| ieee80211_add_pending_skbs(local, &pending); |
| |
| if (need_null) |
| ieee80211_send_null_response( |
| sdata, sta, find_highest_prio_tid(tids), |
| reason, false); |
| |
| sta_info_recalc_tim(sta); |
| } else { |
| /* |
| * We need to release a frame that is buffered somewhere in the |
| * driver ... it'll have to handle that. |
| * Note that the driver also has to check the number of frames |
| * on the TIDs we're releasing from - if there are more than |
| * n_frames it has to set the more-data bit (if we didn't ask |
| * it to set it anyway due to other buffered frames); if there |
| * are fewer than n_frames it has to make sure to adjust that |
| * to allow the service period to end properly. |
| */ |
| drv_release_buffered_frames(local, sta, driver_release_tids, |
| n_frames, reason, more_data); |
| |
| /* |
| * Note that we don't recalculate the TIM bit here as it would |
| * most likely have no effect at all unless the driver told us |
| * that the TID(s) became empty before returning here from the |
| * release function. |
| * Either way, however, when the driver tells us that the TID(s) |
| * became empty we'll do the TIM recalculation. |
| */ |
| } |
| } |
| |
| void ieee80211_sta_ps_deliver_poll_response(struct sta_info *sta) |
| { |
| u8 ignore_for_response = sta->sta.uapsd_queues; |
| |
| /* |
| * If all ACs are delivery-enabled then we should reply |
| * from any of them, if only some are enabled we reply |
| * only from the non-enabled ones. |
| */ |
| if (ignore_for_response == BIT(IEEE80211_NUM_ACS) - 1) |
| ignore_for_response = 0; |
| |
| ieee80211_sta_ps_deliver_response(sta, 1, ignore_for_response, |
| IEEE80211_FRAME_RELEASE_PSPOLL); |
| } |
| |
| void ieee80211_sta_ps_deliver_uapsd(struct sta_info *sta) |
| { |
| int n_frames = sta->sta.max_sp; |
| u8 delivery_enabled = sta->sta.uapsd_queues; |
| |
| /* |
| * If we ever grow support for TSPEC this might happen if |
| * the TSPEC update from hostapd comes in between a trigger |
| * frame setting WLAN_STA_UAPSD in the RX path and this |
| * actually getting called. |
| */ |
| if (!delivery_enabled) |
| return; |
| |
| switch (sta->sta.max_sp) { |
| case 1: |
| n_frames = 2; |
| break; |
| case 2: |
| n_frames = 4; |
| break; |
| case 3: |
| n_frames = 6; |
| break; |
| case 0: |
| /* XXX: what is a good value? */ |
| n_frames = 128; |
| break; |
| } |
| |
| ieee80211_sta_ps_deliver_response(sta, n_frames, ~delivery_enabled, |
| IEEE80211_FRAME_RELEASE_UAPSD); |
| } |
| |
| void ieee80211_sta_block_awake(struct ieee80211_hw *hw, |
| struct ieee80211_sta *pubsta, bool block) |
| { |
| struct sta_info *sta = container_of(pubsta, struct sta_info, sta); |
| |
| trace_api_sta_block_awake(sta->local, pubsta, block); |
| |
| if (block) { |
| set_sta_flag(sta, WLAN_STA_PS_DRIVER); |
| return; |
| } |
| |
| if (!test_sta_flag(sta, WLAN_STA_PS_DRIVER)) |
| return; |
| |
| if (!test_sta_flag(sta, WLAN_STA_PS_STA)) { |
| set_sta_flag(sta, WLAN_STA_PS_DELIVER); |
| clear_sta_flag(sta, WLAN_STA_PS_DRIVER); |
| ieee80211_queue_work(hw, &sta->drv_deliver_wk); |
| } else if (test_sta_flag(sta, WLAN_STA_PSPOLL) || |
| test_sta_flag(sta, WLAN_STA_UAPSD)) { |
| /* must be asleep in this case */ |
| clear_sta_flag(sta, WLAN_STA_PS_DRIVER); |
| ieee80211_queue_work(hw, &sta->drv_deliver_wk); |
| } else { |
| clear_sta_flag(sta, WLAN_STA_PS_DRIVER); |
| } |
| } |
| EXPORT_SYMBOL(ieee80211_sta_block_awake); |
| |
| void ieee80211_sta_eosp(struct ieee80211_sta *pubsta) |
| { |
| struct sta_info *sta = container_of(pubsta, struct sta_info, sta); |
| struct ieee80211_local *local = sta->local; |
| |
| trace_api_eosp(local, pubsta); |
| |
| clear_sta_flag(sta, WLAN_STA_SP); |
| } |
| EXPORT_SYMBOL(ieee80211_sta_eosp); |
| |
| void ieee80211_sta_set_buffered(struct ieee80211_sta *pubsta, |
| u8 tid, bool buffered) |
| { |
| struct sta_info *sta = container_of(pubsta, struct sta_info, sta); |
| |
| if (WARN_ON(tid >= IEEE80211_NUM_TIDS)) |
| return; |
| |
| trace_api_sta_set_buffered(sta->local, pubsta, tid, buffered); |
| |
| if (buffered) |
| set_bit(tid, &sta->driver_buffered_tids); |
| else |
| clear_bit(tid, &sta->driver_buffered_tids); |
| |
| sta_info_recalc_tim(sta); |
| } |
| EXPORT_SYMBOL(ieee80211_sta_set_buffered); |
| |
| int sta_info_move_state(struct sta_info *sta, |
| enum ieee80211_sta_state new_state) |
| { |
| might_sleep(); |
| |
| if (sta->sta_state == new_state) |
| return 0; |
| |
| /* check allowed transitions first */ |
| |
| switch (new_state) { |
| case IEEE80211_STA_NONE: |
| if (sta->sta_state != IEEE80211_STA_AUTH) |
| return -EINVAL; |
| break; |
| case IEEE80211_STA_AUTH: |
| if (sta->sta_state != IEEE80211_STA_NONE && |
| sta->sta_state != IEEE80211_STA_ASSOC) |
| return -EINVAL; |
| break; |
| case IEEE80211_STA_ASSOC: |
| if (sta->sta_state != IEEE80211_STA_AUTH && |
| sta->sta_state != IEEE80211_STA_AUTHORIZED) |
| return -EINVAL; |
| break; |
| case IEEE80211_STA_AUTHORIZED: |
| if (sta->sta_state != IEEE80211_STA_ASSOC) |
| return -EINVAL; |
| break; |
| default: |
| WARN(1, "invalid state %d", new_state); |
| return -EINVAL; |
| } |
| |
| sta_dbg(sta->sdata, "moving STA %pM to state %d\n", |
| sta->sta.addr, new_state); |
| |
| /* |
| * notify the driver before the actual changes so it can |
| * fail the transition |
| */ |
| if (test_sta_flag(sta, WLAN_STA_INSERTED)) { |
| int err = drv_sta_state(sta->local, sta->sdata, sta, |
| sta->sta_state, new_state); |
| if (err) |
| return err; |
| } |
| |
| /* reflect the change in all state variables */ |
| |
| switch (new_state) { |
| case IEEE80211_STA_NONE: |
| if (sta->sta_state == IEEE80211_STA_AUTH) |
| clear_bit(WLAN_STA_AUTH, &sta->_flags); |
| break; |
| case IEEE80211_STA_AUTH: |
| if (sta->sta_state == IEEE80211_STA_NONE) |
| set_bit(WLAN_STA_AUTH, &sta->_flags); |
| else if (sta->sta_state == IEEE80211_STA_ASSOC) |
| clear_bit(WLAN_STA_ASSOC, &sta->_flags); |
| break; |
| case IEEE80211_STA_ASSOC: |
| if (sta->sta_state == IEEE80211_STA_AUTH) { |
| set_bit(WLAN_STA_ASSOC, &sta->_flags); |
| } else if (sta->sta_state == IEEE80211_STA_AUTHORIZED) { |
| if (sta->sdata->vif.type == NL80211_IFTYPE_AP || |
| (sta->sdata->vif.type == NL80211_IFTYPE_AP_VLAN && |
| !sta->sdata->u.vlan.sta)) |
| atomic_dec(&sta->sdata->bss->num_mcast_sta); |
| clear_bit(WLAN_STA_AUTHORIZED, &sta->_flags); |
| } |
| break; |
| case IEEE80211_STA_AUTHORIZED: |
| if (sta->sta_state == IEEE80211_STA_ASSOC) { |
| if (sta->sdata->vif.type == NL80211_IFTYPE_AP || |
| (sta->sdata->vif.type == NL80211_IFTYPE_AP_VLAN && |
| !sta->sdata->u.vlan.sta)) |
| atomic_inc(&sta->sdata->bss->num_mcast_sta); |
| set_bit(WLAN_STA_AUTHORIZED, &sta->_flags); |
| } |
| break; |
| default: |
| break; |
| } |
| |
| sta->sta_state = new_state; |
| |
| return 0; |
| } |
| |
| u8 sta_info_tx_streams(struct sta_info *sta) |
| { |
| struct ieee80211_sta_ht_cap *ht_cap = &sta->sta.ht_cap; |
| u8 rx_streams; |
| |
| if (!sta->sta.ht_cap.ht_supported) |
| return 1; |
| |
| if (sta->sta.vht_cap.vht_supported) { |
| int i; |
| u16 tx_mcs_map = |
| le16_to_cpu(sta->sta.vht_cap.vht_mcs.tx_mcs_map); |
| |
| for (i = 7; i >= 0; i--) |
| if ((tx_mcs_map & (0x3 << (i * 2))) != |
| IEEE80211_VHT_MCS_NOT_SUPPORTED) |
| return i + 1; |
| } |
| |
| if (ht_cap->mcs.rx_mask[3]) |
| rx_streams = 4; |
| else if (ht_cap->mcs.rx_mask[2]) |
| rx_streams = 3; |
| else if (ht_cap->mcs.rx_mask[1]) |
| rx_streams = 2; |
| else |
| rx_streams = 1; |
| |
| if (!(ht_cap->mcs.tx_params & IEEE80211_HT_MCS_TX_RX_DIFF)) |
| return rx_streams; |
| |
| return ((ht_cap->mcs.tx_params & IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK) |
| >> IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT) + 1; |
| } |
| |
| void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo) |
| { |
| struct ieee80211_sub_if_data *sdata = sta->sdata; |
| struct ieee80211_local *local = sdata->local; |
| struct rate_control_ref *ref = NULL; |
| struct timespec uptime; |
| u32 thr = 0; |
| int i, ac; |
| |
| if (test_sta_flag(sta, WLAN_STA_RATE_CONTROL)) |
| ref = local->rate_ctrl; |
| |
| sinfo->generation = sdata->local->sta_generation; |
| |
| /* do before driver, so beacon filtering drivers have a |
| * chance to e.g. just add the number of filtered beacons |
| * (or just modify the value entirely, of course) |
| */ |
| if (sdata->vif.type == NL80211_IFTYPE_STATION) |
| sinfo->rx_beacon = sdata->u.mgd.count_beacon_signal; |
| |
| drv_sta_statistics(local, sdata, &sta->sta, sinfo); |
| |
| sinfo->filled |= BIT(NL80211_STA_INFO_INACTIVE_TIME) | |
| BIT(NL80211_STA_INFO_STA_FLAGS) | |
| BIT(NL80211_STA_INFO_BSS_PARAM) | |
| BIT(NL80211_STA_INFO_CONNECTED_TIME) | |
| BIT(NL80211_STA_INFO_RX_DROP_MISC) | |
| BIT(NL80211_STA_INFO_BEACON_LOSS); |
| |
| ktime_get_ts(&uptime); |
| sinfo->connected_time = uptime.tv_sec - sta->last_connected; |
| sinfo->inactive_time = jiffies_to_msecs(jiffies - sta->last_rx); |
| |
| if (!(sinfo->filled & (BIT(NL80211_STA_INFO_TX_BYTES64) | |
| BIT(NL80211_STA_INFO_TX_BYTES)))) { |
| sinfo->tx_bytes = 0; |
| for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) |
| sinfo->tx_bytes += sta->tx_bytes[ac]; |
| sinfo->filled |= BIT(NL80211_STA_INFO_TX_BYTES64); |
| } |
| |
| if (!(sinfo->filled & BIT(NL80211_STA_INFO_TX_PACKETS))) { |
| sinfo->tx_packets = 0; |
| for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) |
| sinfo->tx_packets += sta->tx_packets[ac]; |
| sinfo->filled |= BIT(NL80211_STA_INFO_TX_PACKETS); |
| } |
| |
| if (!(sinfo->filled & (BIT(NL80211_STA_INFO_RX_BYTES64) | |
| BIT(NL80211_STA_INFO_RX_BYTES)))) { |
| sinfo->rx_bytes = sta->rx_bytes; |
| sinfo->filled |= BIT(NL80211_STA_INFO_RX_BYTES64); |
| } |
| |
| if (!(sinfo->filled & BIT(NL80211_STA_INFO_RX_PACKETS))) { |
| sinfo->rx_packets = sta->rx_packets; |
| sinfo->filled |= BIT(NL80211_STA_INFO_RX_PACKETS); |
| } |
| |
| if (!(sinfo->filled & BIT(NL80211_STA_INFO_TX_RETRIES))) { |
| sinfo->tx_retries = sta->tx_retry_count; |
| sinfo->filled |= BIT(NL80211_STA_INFO_TX_RETRIES); |
| } |
| |
| if (!(sinfo->filled & BIT(NL80211_STA_INFO_TX_FAILED))) { |
| sinfo->tx_failed = sta->tx_retry_failed; |
| sinfo->filled |= BIT(NL80211_STA_INFO_TX_FAILED); |
| } |
| |
| sinfo->rx_dropped_misc = sta->rx_dropped; |
| sinfo->beacon_loss_count = sta->beacon_loss_count; |
| |
| if (sdata->vif.type == NL80211_IFTYPE_STATION && |
| !(sdata->vif.driver_flags & IEEE80211_VIF_BEACON_FILTER)) { |
| sinfo->filled |= BIT(NL80211_STA_INFO_BEACON_RX) | |
| BIT(NL80211_STA_INFO_BEACON_SIGNAL_AVG); |
| sinfo->rx_beacon_signal_avg = ieee80211_ave_rssi(&sdata->vif); |
| } |
| |
| if ((sta->local->hw.flags & IEEE80211_HW_SIGNAL_DBM) || |
| (sta->local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC)) { |
| if (!(sinfo->filled & BIT(NL80211_STA_INFO_SIGNAL))) { |
| sinfo->signal = (s8)sta->last_signal; |
| sinfo->filled |= BIT(NL80211_STA_INFO_SIGNAL); |
| } |
| |
| if (!(sinfo->filled & BIT(NL80211_STA_INFO_SIGNAL_AVG))) { |
| sinfo->signal_avg = (s8) -ewma_read(&sta->avg_signal); |
| sinfo->filled |= BIT(NL80211_STA_INFO_SIGNAL_AVG); |
| } |
| } |
| |
| if (sta->chains && |
| !(sinfo->filled & (BIT(NL80211_STA_INFO_CHAIN_SIGNAL) | |
| BIT(NL80211_STA_INFO_CHAIN_SIGNAL_AVG)))) { |
| sinfo->filled |= BIT(NL80211_STA_INFO_CHAIN_SIGNAL) | |
| BIT(NL80211_STA_INFO_CHAIN_SIGNAL_AVG); |
| |
| sinfo->chains = sta->chains; |
| for (i = 0; i < ARRAY_SIZE(sinfo->chain_signal); i++) { |
| sinfo->chain_signal[i] = sta->chain_signal_last[i]; |
| sinfo->chain_signal_avg[i] = |
| (s8) -ewma_read(&sta->chain_signal_avg[i]); |
| } |
| } |
| |
| if (!(sinfo->filled & BIT(NL80211_STA_INFO_TX_BITRATE))) { |
| sta_set_rate_info_tx(sta, &sta->last_tx_rate, &sinfo->txrate); |
| sinfo->filled |= BIT(NL80211_STA_INFO_TX_BITRATE); |
| } |
| |
| if (!(sinfo->filled & BIT(NL80211_STA_INFO_RX_BITRATE))) { |
| sta_set_rate_info_rx(sta, &sinfo->rxrate); |
| sinfo->filled |= BIT(NL80211_STA_INFO_RX_BITRATE); |
| } |
| |
| sinfo->filled |= BIT(NL80211_STA_INFO_TID_STATS); |
| for (i = 0; i < IEEE80211_NUM_TIDS + 1; i++) { |
| struct cfg80211_tid_stats *tidstats = &sinfo->pertid[i]; |
| |
| if (!(tidstats->filled & BIT(NL80211_TID_STATS_RX_MSDU))) { |
| tidstats->filled |= BIT(NL80211_TID_STATS_RX_MSDU); |
| tidstats->rx_msdu = sta->rx_msdu[i]; |
| } |
| |
| if (!(tidstats->filled & BIT(NL80211_TID_STATS_TX_MSDU))) { |
| tidstats->filled |= BIT(NL80211_TID_STATS_TX_MSDU); |
| tidstats->tx_msdu = sta->tx_msdu[i]; |
| } |
| |
| if (!(tidstats->filled & |
| BIT(NL80211_TID_STATS_TX_MSDU_RETRIES)) && |
| local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) { |
| tidstats->filled |= |
| BIT(NL80211_TID_STATS_TX_MSDU_RETRIES); |
| tidstats->tx_msdu_retries = sta->tx_msdu_retries[i]; |
| } |
| |
| if (!(tidstats->filled & |
| BIT(NL80211_TID_STATS_TX_MSDU_FAILED)) && |
| local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) { |
| tidstats->filled |= |
| BIT(NL80211_TID_STATS_TX_MSDU_FAILED); |
| tidstats->tx_msdu_failed = sta->tx_msdu_failed[i]; |
| } |
| } |
| |
| if (ieee80211_vif_is_mesh(&sdata->vif)) { |
| #ifdef CONFIG_MAC80211_MESH |
| sinfo->filled |= BIT(NL80211_STA_INFO_LLID) | |
| BIT(NL80211_STA_INFO_PLID) | |
| BIT(NL80211_STA_INFO_PLINK_STATE) | |
| BIT(NL80211_STA_INFO_LOCAL_PM) | |
| BIT(NL80211_STA_INFO_PEER_PM) | |
| BIT(NL80211_STA_INFO_NONPEER_PM); |
| |
| sinfo->llid = sta->llid; |
| sinfo->plid = sta->plid; |
| sinfo->plink_state = sta->plink_state; |
| if (test_sta_flag(sta, WLAN_STA_TOFFSET_KNOWN)) { |
| sinfo->filled |= BIT(NL80211_STA_INFO_T_OFFSET); |
| sinfo->t_offset = sta->t_offset; |
| } |
| sinfo->local_pm = sta->local_pm; |
| sinfo->peer_pm = sta->peer_pm; |
| sinfo->nonpeer_pm = sta->nonpeer_pm; |
| #endif |
| } |
| |
| sinfo->bss_param.flags = 0; |
| if (sdata->vif.bss_conf.use_cts_prot) |
| sinfo->bss_param.flags |= BSS_PARAM_FLAGS_CTS_PROT; |
| if (sdata->vif.bss_conf.use_short_preamble) |
| sinfo->bss_param.flags |= BSS_PARAM_FLAGS_SHORT_PREAMBLE; |
| if (sdata->vif.bss_conf.use_short_slot) |
| sinfo->bss_param.flags |= BSS_PARAM_FLAGS_SHORT_SLOT_TIME; |
| sinfo->bss_param.dtim_period = sdata->vif.bss_conf.dtim_period; |
| sinfo->bss_param.beacon_interval = sdata->vif.bss_conf.beacon_int; |
| |
| sinfo->sta_flags.set = 0; |
| sinfo->sta_flags.mask = BIT(NL80211_STA_FLAG_AUTHORIZED) | |
| BIT(NL80211_STA_FLAG_SHORT_PREAMBLE) | |
| BIT(NL80211_STA_FLAG_WME) | |
| BIT(NL80211_STA_FLAG_MFP) | |
| BIT(NL80211_STA_FLAG_AUTHENTICATED) | |
| BIT(NL80211_STA_FLAG_ASSOCIATED) | |
| BIT(NL80211_STA_FLAG_TDLS_PEER); |
| if (test_sta_flag(sta, WLAN_STA_AUTHORIZED)) |
| sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_AUTHORIZED); |
| if (test_sta_flag(sta, WLAN_STA_SHORT_PREAMBLE)) |
| sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_SHORT_PREAMBLE); |
| if (sta->sta.wme) |
| sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_WME); |
| if (test_sta_flag(sta, WLAN_STA_MFP)) |
| sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_MFP); |
| if (test_sta_flag(sta, WLAN_STA_AUTH)) |
| sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_AUTHENTICATED); |
| if (test_sta_flag(sta, WLAN_STA_ASSOC)) |
| sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_ASSOCIATED); |
| if (test_sta_flag(sta, WLAN_STA_TDLS_PEER)) |
| sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_TDLS_PEER); |
| |
| /* check if the driver has a SW RC implementation */ |
| if (ref && ref->ops->get_expected_throughput) |
| thr = ref->ops->get_expected_throughput(sta->rate_ctrl_priv); |
| else |
| thr = drv_get_expected_throughput(local, &sta->sta); |
| |
| if (thr != 0) { |
| sinfo->filled |= BIT(NL80211_STA_INFO_EXPECTED_THROUGHPUT); |
| sinfo->expected_throughput = thr; |
| } |
| } |